Problems adding attribute via OID Self-Service Console

I have added a new attribute via the Oracle Directory Manager tool, but when I map it to the Self-Service Console and select the Predefined List from the User Interface Type, and add the values to the list, only the last value will show up as many times as entries are in the list. For example, the list has the values Y N R, and when updating the value in the Console, the attributes list values are R R R.
I have not found anything on Metalink indicating a bug. Has anybody have any experience with this problem?
any help will be appreciated.
thanks

Please open a SR on this issue or open a bug.
regards,
--Olaf                                                                                                                                                                                                   

Similar Messages

  • OID Self Service Console - Page Cannot Found error

    Hi,
    I am using Oracle Collaboration Suite and facing problem while creating a user. I navigated to the OID Self Service Console and signed in successfully with orcladmin user. After successfull login as I click on Directory Tab to create user then Page Cannot be displayed typical browsing error appears. I cannot find whats wrong. Infrastructrue and middle tier components all are up and seem working fine.
    I cannot find way to deal with Page Cannot Found error. Please help
    Regards,
    Sami

    Try typing in the URL yourself in the address location. Do you observe the same behavior?
    If the forward-slash at the end still makes a difference, then verify that you have not modified your httpd.conf on the infrastructure instance.
    Here, check if your HTTP Server had any redirection rules or any aliases setup in the httpd.conf in your infrastructure. The trailing forward-slash / is generally meaningful in those places.
    Also note if you see the same problem with other targets too. for instances, sso-login server.
    AMN

  • Cn=orcladmin cannot log into OID Self Service Console

    Dear All 1!!
    I synchronized my Microsoft AD users with Oracle Internet Directory server, and configure these users for external authentication through the use of plug-in. Every thing was running fine, unless i disabled the plug-in to enable it later again. After this activity, my orcladmin cannot log into the OID Self service console, however the migrated users can successfully log in. I can still log into the Oracle Directory manager with orcladmin.
    Is there something specific i need to do to enable orcladmin to log into the self service console again.
    Regards,
    SwapSawe.

    Hi All !!!
    I resolved this one, it was easy, wonder how did i miss it. The solution is to open the Oracle Directory Manager, traverse to Pluin-Management, adwhencompare/adwhenbind -> Optional properties, and enter "(|(!(objectclass=orcladuser))(cn=orcladmin))" in Plug-in Entry properties. It required a system restart to work it well, just a restart for OID ias-component won't work.
    Thanks for the look,
    Regards,
    Swapnil.

  • FAIL TO CONNECT TO OID SELF SERVICE CONSOLE AND SSO

    Since a server crash on 29 Dec I have been unable to connect to OID Self Service Console or login with SSO (even though EM says both are up). When the mid-tier went down http server, portal and webcache would not start due to all three looking for wrong wallet location. Placed and saved correct wallet loc. in ssl.conf and all three came up. SSO engine would not run until I changed the password and ran ssooconf.sql
    When starting OID I get the following errors in the odisrv01.log:
    Oracle Directory Integration Server instance# 01 started..
    Mon Jan 21 14:34:52 EST 2008 : Starting Server to execute Profile Group :default against LDAP Server (devbox1.askafip.org:636)
    Mon Jan 21 14:34:52 EST 2008 : SSL Mode :1
    Mon Jan 21 14:34:53 EST 2008 : Exception Encounterd while polling for Shutdown Event..javax.naming.CommunicationException: connection
    closed [Root exception is java.io.IOException: connection closed]; remaining name 'cn=instance1,cn=odisrv,cn=subregistrysubentry'
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:34:53 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:34:54 EST 2008 : ReConnected ..!!
    Mon Jan 21 14:35:04 EST 2008 : Exception Encounterd while polling for Shutdown Event..javax.naming.CommunicationException: connection
    closed [Root exception is java.io.IOException: connection closed]; remaining name 'cn=instance1,cn=odisrv,cn=subregistrysubentry'
    Mon Jan 21 14:35:06 EST 2008 : ReConnected ..!!
    Mon Jan 21 14:35:09 EST 2008 : Exception Encounterd while polling for Shutdown Event..javax.naming.CommunicationException: connection
    closed [Root exception is java.io.IOException: connection closed]; remaining name 'cn=instance1,cn=odisrv,cn=subregistrysubentry'
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:35:09 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:35:10 EST 2008 : ReConnected ..!!
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER: Exception Refreshing Profiles : ODIException: DIP_GEN_INITIALIZATION_EXCEPTION
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    Mon Jan 21 14:36:36 EST 2008 : SCHEDULER : ReConnected to OID ..!!
    ==================================================
    Not sure where to look next. Any help is appreciated,
    John

    Run the oid services in debug mode and check the log for any errors.

  • User interface for updating/adding attributes in OID

    Hello,
    I have not done the develop work in OAS10g (web, oid, +) though I have years experiences as DBA in OAS and Oracle database servers.
    I need to develop a user interface for users to add or update the user's attributes such as sn, manager etc.
    The IDM system is working in prod: OAS 10g r2, installed (upgraded to) with infrastructure and oid 10.1.4.3.
    OID: user attributes have been loaded with: CN, UID, mail and etc.
    The requirement
    User interface: an app based Ohttp web 10g
    I'd like the interface works like:
    The user accessing the web interface, is prompted with UID and mail. if the user correctly fills the fields, then will be prompted with the attributes which user can add or update.
    Because I have Not done any development in OAS (web, oid), I need know what skills I need to aquire. ANd how should I proceed?
    I may know the skills would be Ohttp development and OID API (LDAP), but I need these be specific as much as possible.
    Can any point the direction with examples and docs?
    TIA
    GA

    ajaybabu007 wrote:
    For managing the user related activities (create,update,lock,unlock,delete and so on) through an Web UI interface can be administrated with the Oracle Identity Management Self Service Console (http://infra_host_name:7777/oiddas) which is an inbuild component of OID/OSSO. Please provide orcladmin/<password> credentials for accessing this Web UI.
    ---ABP thanks.
    1) the app for user to add/update the attributes. we cannot give orcladmin to them
    2) though the users as their own can access the oiddas, there are only limit of user info could be updated, which cannot serve the attributes we customized and loaded in OID.

  • Unable to view Oracle Internet Directory Self Service Console

    I am trying to access Oracle Internet Directory Self Service Console via following URL http://x.x.x.x:7777/oiddas.
    i found the welcome page, but not able to access other tabs like
    my profile,directory,configuration.
    Error: Error encountered while connecting to Directory Server
    Please help!

    Thanks for your reply.
    As per your suggestion i checked with EM..and find directory server instances is running.
    whenever i clicked on <Oracle Internet Directory Self Service Console> link, i found said error.

  • Inbox menu in Self service console is not working(OIM11gR2PS1)

    We have upgraded OIM 11g R1 (BP02) to OIM 11g R2 PS1.
    Issue : when we click on the inbox menu in Self service console, a empty page displayed (attaching screen shot). After closing this page and reopen we are getting error in logs as below.
    Caused By: oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed: '/WEB-INF/oracle/iam/ui/inbox/tfs/inbox-tf.xml#inbox-tf' 'VIEW'.
      at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:182)
      at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:91)

    Doc ID 1572430.1

  • OTL/HXC - Adding Help Link to Self Service Time Entry (TcActivitiesPG)

    Hello folks,
    I'm a system analyst newly assigned to handling Oracle HR at my job. One thing I'm looking into is the possibility of adding a link to help documentation on our intranet (i.e. outside of Oracle) to the page where employees enter their time (using Self Service OTL). The problem is that no matter how much I look at personalizations for this page, I can't seem to track down a page element that could be used for that. I know there should be something, but I'm not having any luck.
    Does anyone have any suggestions for me? How would you add an arbitrary link at the top (or bottom) of the self service timecards?

    We're in the process of upgrading to R12; is it possible to add or custom links through personalization there, or is it still something that can only be done via customization? (We can certainly do the latter, but were hoping for a solution that didn't require it.)
    - Brad

  • Tracing Termination Workflow attributes from Manager Self Service

    From Self service page on termination, I am setting attributes in a workflow function these attributes are used in the notification that is sent to the users. For a particular scenario I want to trace values of the attributes, is there a way to trace complete flow and attribute values flowing from self service page -> Workflow -> Notification.

    Why don't you try with the Wokflow status monitor. There you can check out the activities and check out the values of the attributes i think

  • View Employe Element Entries  via Manager Self Service

    Hi all,
    Hope you can help me with this.
    I'm working on HRMS version 12.
    Try to show our users the manager self service module.
    I cant find there the employee's element entries.
    I can find almost all employees details & salaries in the different function, but the elements are gone...
    Can anyone try to help to find the elements entries in Manager Self Service ?
    Thanks.
    Yaniv

    Additionally, if you have an Advanced Benefits licence and are using the ICD (Independent Compensation Distribution) page to allocate awards (which create element entries) you can use the View History page of that to show elements linked to Standard Rates.

  • Problem accessing VIP via HTTP from service servers

    I thought I had a pretty simple config on my CSS11501- but have run into an issue I'm having trouble resolving.
    I have two unix webservers (IPs are .99 and .100) on ports e1 and e2, and my uplink for the CSS is on port e8.
    The CSS has a VIP address (.105) that load balances HTTP requests to .99 and .100.
    From .99 and .100 I can ping the VIP address - and from outside the CSS - almost everything works great for the site I'm hosting on .105.
    I do have two web pages however that attempt to make calls directly to the VIP address - I noticed I can't load those pages.
    Nor can I just browse the website on the VIP address from either of the servers. The webservers can browse their own pages via IP, and each other's pages via IP.
    Just not pages on the VIP.
    I think it may be a case of the servers thinking that IP spoofing is occurring - or maybe I missed something simple in the config.
    Here's what I see in a 'show flows' when I try and browse the VIp address (.105) from the .100 server.
    Src Address SPort Dst Address DPort NAT Dst Address Prt InPort OutPort
    65.207.212.100 53758 65.207.212.105 80 65.207.212.100 TCP e2 e2
    65.207.212.100 80 65.207.212.100 53758 65.207.212.100 TCP e2 e2
    Since it appears that the CSS NATs the request to the same IP the server is using, will the reply from the server ever make it back to the CSS?
    Or does it think that it shouldn't need to reply - becauuse it is that IP?
    Should I be able to browse the VIP site from the webservers.
    Below is the full CSS config if someone can help me figure this out.
    Thanks in advnace for any and all help.
    Paul
    CSS11501# show run
    !Generated on 08/30/2005 12:08:11
    !Active version: sg0750004
    configure
    !*************************** GLOBAL ***************************
    no restrict web-mgmt
    acl enable
    logging subsystem acl level debug-7
    ip route 0.0.0.0 0.0.0.0 65.207.212.1 1
    !************************** CIRCUIT **************************
    circuit VLAN1
    ip address 65.207.212.104 255.255.255.0
    !************************** SERVICE **************************
    service www2
    keepalive type tcp
    keepalive port 80
    ip address 65.207.212.99
    active
    service www3
    keepalive type tcp
    keepalive port 80
    ip address 65.207.212.100
    active
    !*************************** OWNER ***************************
    owner WWW
    content rule1
    vip address 65.207.212.105
    add service www2
    add service www3
    port 80
    protocol tcp
    advanced-balance sticky-srcip-dstport
    active
    !**************************** ACL ****************************
    acl 1
    clause 10 permit any any destination any
    apply circuit-(VLAN1)

    Paul,
    simple config and well-know basic mistake :-)
    If a server tries to access the vip, the css will forward the request to the same server or the other one.
    Both ways, the response from the server will go directly to the client-server, bypassing the CSS.
    For this to work, you need to do client nat so the server making the HTTP connection appears to be coming from the CSS.
    Create a group like this
    group servernat
    vip addr 65.207.212.105
    active
    and add the following to your acl
    clause 5 permit any 65.207.212.99 destination content www/rule1 sourcegroup servernet
    Do a similar clause for the 2nd server.
    re-apply the acl.
    Everything should work now.
    Gilles.
    Thanks for rating.

  • Problem adding attribute dimension

    Version: 9.2
    Cube: ASO
    I feel like I am dropping the ball. I am trying to add an attribute to my ASO cube at the bottom of my outline. Everything I try to edit the member properties I get an "Attribute Calculations dimension can not be created". I don't have any calculations/consolidations.
    When I click the database properties-->Attribute settings-->Calucation dimension names-->(try entering a name) all I get is "NULL value for member name string".
    When I use ASOsamp(or any app) I can create/tag an attribute dimension though.

    Hi There,
    I guess you might've added a Gen1, member, i.e. a dimension, at the end of the outline & intended it to be an Attribute dimension. Correct?
    If yes, after adding the member at the end,
    - Before opening the dialog for member properties, tag the dimension as "Attribute" by clicking on the appropriate icon, right on the outline page.
    - Associate this attr. dim to one of your sparse dims.
    - Add a member to the Attribute dim. & associate it with one of the members of sparse dim.
    - Now, it should let you save the outline.
    Good luck!
    - Natesh

  • HP Officejet 5610: Problem Adding Printer via USB

    Hello. I am trying to print via USB on a HP Officejet 5610. My Mac has detected it via USB. I tried to add it by "Default Printer." I got the model "HP" but could not find the model "Officejet 5610" for the gimp-print. I tried a few random models to print but none of them work. Could someone help me please? I do not have the installation CD. This is not my house. The person who owns the printer is usually not home and his computer locked.
    Thank you.

    Disconnect the printer.  Remove references to it from  print and scan in system preferences.  Remove the HP folder from /Library/Printers.  Reconnect it.  Try again.  It should dowwnload drivers.

  • Changing the MyProfile tab of Self Service console in OIM 11g

    Hi...
    I want the user not be able to edit any of the fields in the Attribute tab under MyProfile. The user should be allowed just to view his details.
    Also in the roles, resource, Proxy tab he should not be able to create request for role, resource, proxy respectively.
    How can i work out for this?
    Thanks..

    I want the user not be able to edit any of the fields in the Attribute tab under MyProfilehttp://rajivdewan.blogspot.com/2011/08/modify-authorization-policies-in-oim.html
    Also in the roles, resource, Proxy tab he should not be able to create request for role, resource, proxy respectivelYou can remove access from Templates. For Proxy, create authroization policy to restrict the search results
    Or
    You'll have to find the exact JSPX file to remive these tabs.

  • Problems ImportExport.properties (import) In Shared Services Console - SOS

    Hello everyone,
    I have to export all users, groups and provisions of the Security v.11.1.1.3 a Hyperion Planning. Csv file, in which the user can export the file, you see, modify and re-import. Mequeda export if, if I creael. Csv file, but does not make me import the file with the changes, I just import the file without any changes.
    Someone could help me with this pebble to reset the file and it can be used as a capture interface for the user.
    Greetings and thanks

    If you are getting the following error then it is a known issue
    "You have exported security and made minor changes to the export file. When you import the *.csv file, you receive the following messages in a trace:
    Trace:
    " Import : Attempting to parse the XML file
    file:/C:/Hyperion/common/utilities/CSSImportExportUtility/importexport/<filename>.csv
    28:1000:Internal Error. Review the security logs for details.
    Aborting program... "
    The CSSImportExport code in 11.1.1.3 doesn't handle the import data correctly. The issue is documented in unpublished Bug 9012947.
    You can copy \Hyperion\common\utilities\CSSImportExportUtility\cssimportexport.zip from a prior version, and use that version of utility for the import."
    Document - ID 951516.1 on my Oracle Support - You Cannot Import a *.csv File Using the CSSImportExport Utility in 11.1.1.3
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for