Problems adding Bridge Data to prepaid (Allset) iPhone5

Anyone having problems trying to add bridge data to a prepaid (Allset) phone. I've tried to add 3GB to my iPhone 5 all day today and I've had no success. I've tried doing through (1) the new My Verizon Mobile App, (2) dialing *611 and following the prompts and (3) on my PC while logged into my "My Verizon" account. All three methods result in a "system error" and I can't add any bridge data. The only thing that worked, was it allowed me to put $25 on account by charging my credit card. So now I've been taken for $25 and can't do anything with the money on now have in my account. A call to customer service was a complete waste of time. The CSR told me to do the *228 Activation code on my 4G LTE iPhone 5. I'm not a CSR and I know you don't use *228 on an a 4G iPhone! After wasting 30 minutes and being told my SIM card "had to age" (very creative), I got tired of the snow job and hung up. Is anyone else having problems adding bridge data? Please advise if you have succeeded in adding bridge data today.

Why have a Prepaid forum that is not monitored by CSR's who can actually do something about the issues posted by Prepaid customers? I'm not looking for a "sorry to hear about your problem" reply, I'm looking for answers/solutions.
What a ridiculous arrangement. This Prepaid sub-forum should be deleted so customers don't waste their time posting problems here.
Sent from my iPad

Similar Messages

Problem with Bridge CS4 reading/editing XMP metadata added in Bridge CS6

Please excuse me if this is a dumb/obvious question. I did try searching the forums for similar problems and didn't find anything that seemed to speak to my issue.
I'm having a problem where Bridge CS4 won't read/edit xmp metadata (specifically, keywords and descriptions in the IPTC panel) that I have entered using CS6. it will read some files, not others. The files are all .mp4s. Of these files, I can read/edit IPTC panel metadata for some of them in Bridge CS4; I can add metadata for all of them in CS6. I see no particular pattern in these files to explain what is and isn't read/editable in CS4.
My question is whether this is a compatibility issue between different versions of CS (in this instance, CS4 and CS6). i know it's a tired refrain to blame software when it could easily be user error, in which case I'd be frankly delighted to know what i'm doing wrong. Please bear with me as I give a few more details.
I'm using macs. I've tried this on multiple systems - for instance, on a mac pro 3 which for some reason has both CS4 and CS6 installed, i can add and edit keywords using CS6, but not when using CS4. Again, in CS4, some .mp4 files read/edit, others do not.
Bridge CS4 blames the files and tells me that the selected file cannot store xmp metadata, and that the properties cannot be modified. To be specific, in the metadata panel it says "this property cannot be modified"; in the keyword panel, it says, "This file (zzz.mp4) cannot store xmp metadata. No changes will occur." This seems odd, because I'm able to add xmp metadata for the same files in CS6 on the same computer, and other computers. I know this problem would disappear if all our computers were using CS6 (or CC), but unfortunately that's not a possibility at the moment. Some of them only have CS4.
Computer details (not an exhaustive list, but two instances): mac pro 3.1 running snow leopard, 16GB memory; macbook pro 4.1 running snow leopard, 4GB memory; adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Things I have tried:
Permissions - the files are set to read/write for everyone. Given that I can add/edit metadata in CS6, it doesn't seem to be a permission issue.
Purging the cache - other users seem to have had problems adding metadata in Bridge CS4 where purging the cache for affected files solved the problem. Didn't work in this instance.
Upgrading all affected computers to CS6/CC is beyond my control. I need to figure out why CS4 won't let me read/add/edit xmp metadata, if only for the sake of understanding the broader implications for interoperability.
Any helpful suggestions would be much appreciated.
Thanks,
Kevin

adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Without having experience with mp4 files and metadata my observation is that you certainly have not updated Bridge CS6 ( should be 5.0.2.4) and I believe also not the latest version of CS4, can't imaging this also stayed at .0.0 so first try to update both.
And if CS4 can read the data of some files it should be capable of reading them all. Be sure to have the files completely cached first, can take a while.
Other things to try in CS4 is refresh preferences (hold down option key while restarting Bridge and choose reset prefs).
And also check for hidden cache files using menu view/show hidden files. Sometimes those cache files can be troublesome between versions.
If purge cache did not work and reset prefs also failed consider to also delete Bridge plist file and Bridge cache file manual (from user library)

Problems with the "Date Created" Metadata in Adobe Bridge

Hi everyone.
I am currently working on an electronic photo library for our organization. Part of my mandate is to add a Date Created metadata on all the photos since it is very important to know when the photo was taken. Some photos were dated since 1980s. Since we do not have the digital version of the old photos, we end up scanning these and, in effect the date specified on the "Date Created" was the date it was scanned.
I have the date of some of the old photos when it was taken, but for some, I only have the month and the year (sometimes, just the year). Inventing a day and a month is not an option.
Is it possible to enter a month-year or just the year on the Date Created field under Metadata?
I appreciate your help.
Thanks,
.m.u.r.d.o.c.h.

The problem is that dates are recorded in the file in different schemas. Bridge is displaying the XMP Date Created field which was likely derived from the original Exif date (probably DateTimeOriginal, but may be DateTimeDigitized). This will be the date recorded in the file by the scanner software at the time it was scanned.
The IPTC Date Created field is handled differently. It seems counterintuitive, but if you work in the news business you will know that news photographers often use the IPTC Date Created field more like a "date submitted" or "date scheduled" property, so that photos for a particular shoot which may have been captured over multiple days will sort together. Because of this, most image browsers will not update the XMP Date Created (or Date Taken) fields when the IPTC Core date is changed.
You can edit the original capture date in various programs, which should cause both the Exif and the XMP Date Created fields to be updated. Two that come to mind are Lightroom and BreezeBrowser Pro (for Windows). I've found that with certain images it is necessary to use both programs to get all the dates to line up.

How long does it take for bridge data purchase to be available

I used up all my data on my AllSet plan, so I purchased 1GB of bridge data yesterday. I got the text message saying "Congratulations! 1GB of Data has been added to your account. This data is held in reserve and will become active when your current data is used".
I've got two questions.
1) Is there anywhere on My Verizon (verizonwireless.com) to see this data or purchase history?
2) How long before it is available on my account? I still have no data access on my phone.

You might want to check your bank account to make sure it went through. I did it twice and received confirmation text on both but neither one went through on my bank account. I called tech support and was hung up on by the first cs rep, second time I talked to Lawrence and he helped me. Lawrence did a great job, thank you! Hope this helps.

TableSorter errors when adding new data

so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
     at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
     at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
     at javax.swing.JTable.getValueAt(Unknown Source)
     at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    }code problem II:
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    }TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
    protected TableModel tableModel;
    public static final int DESCENDING = -1;
    public static final int NOT_SORTED = 0;
    public static final int ASCENDING = 1;
    private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
    public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return ((Comparable) o1).compareTo(o2);
    public static final Comparator LEXICAL_COMPARATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return o1.toString().compareTo(o2.toString());
    private Row[] viewToModel;
    private int[] modelToView;
    private JTableHeader tableHeader;
    private MouseListener mouseListener;
    private TableModelListener tableModelListener;
    private Map columnComparators = new HashMap();
    private List sortingColumns = new ArrayList();
    public TableSorter()
        this.mouseListener = new MouseHandler();
        this.tableModelListener = new TableModelHandler();
    public TableSorter(TableModel tableModel)
        this();
        setTableModel(tableModel);
    public TableSorter(TableModel tableModel, JTableHeader tableHeader)
        this();
        setTableHeader(tableHeader);
        setTableModel(tableModel);
    private void clearSortingState()
        viewToModel = null;
        modelToView = null;
    public TableModel getTableModel()
        return tableModel;
    public void setTableModel(TableModel tableModel)
        if (this.tableModel != null)
            this.tableModel.removeTableModelListener(tableModelListener);
        this.tableModel = tableModel;
        if (this.tableModel != null)
            this.tableModel.addTableModelListener(tableModelListener);
        clearSortingState();
        fireTableStructureChanged();
    public JTableHeader getTableHeader()
        return tableHeader;
    public void setTableHeader(JTableHeader tableHeader)
        if (this.tableHeader != null)
            this.tableHeader.removeMouseListener(mouseListener);
            TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
            if (defaultRenderer instanceof SortableHeaderRenderer)
                this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
        this.tableHeader = tableHeader;
        if (this.tableHeader != null)
            this.tableHeader.addMouseListener(mouseListener);
            this.tableHeader.setDefaultRenderer
                    new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
    public boolean isSorting()
        return sortingColumns.size() != 0;
    private Directive getDirective(int column)
        for (int i = 0; i < sortingColumns.size(); i++)
            Directive directive = (Directive)sortingColumns.get(i);
            if (directive.column == column)
                return directive;
        return EMPTY_DIRECTIVE;
    public int getSortingStatus(int column)
        return getDirective(column).direction;
    private void sortingStatusChanged()
        clearSortingState();
        fireTableDataChanged();
        if (tableHeader != null)
            tableHeader.repaint();
    public void setSortingStatus(int column, int status)
        Directive directive = getDirective(column);
        if (directive != EMPTY_DIRECTIVE)
            sortingColumns.remove(directive);
        if (status != NOT_SORTED)
            sortingColumns.add(new Directive(column, status));
        sortingStatusChanged();
    protected Icon getHeaderRendererIcon(int column, int size)
        Directive directive = getDirective(column);
        if (directive == EMPTY_DIRECTIVE)
            return null;
        return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
    private void cancelSorting()
        sortingColumns.clear();
        sortingStatusChanged();
    public void setColumnComparator(Class type, Comparator comparator)
        if (comparator == null)
            columnComparators.remove(type);
        else
            columnComparators.put(type, comparator);
    protected Comparator getComparator(int column)
        Class columnType = tableModel.getColumnClass(column);
        Comparator comparator = (Comparator) columnComparators.get(columnType);
        if (comparator != null)
            return comparator;
        if (Comparable.class.isAssignableFrom(columnType))
            return COMPARABLE_COMAPRATOR;
        return LEXICAL_COMPARATOR;
    private Row[] getViewToModel()
        if (viewToModel == null)
            int tableModelRowCount = tableModel.getRowCount();
            viewToModel = new Row[tableModelRowCount];
            for (int row = 0; row < tableModelRowCount; row++)
                viewToModel[row] = new Row(row);
            if (isSorting())
                Arrays.sort(viewToModel);
        return viewToModel;
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    private int[] getModelToView()
        if (modelToView == null)
            int n = getViewToModel().length;
            modelToView = new int[n];
            for (int i = 0; i < n; i++)
                modelToView[modelIndex(i)] = i;
        return modelToView;
    // TableModel interface methods
    public int getRowCount()
        return (tableModel == null) ? 0 : tableModel.getRowCount();
    public int getColumnCount()
        return (tableModel == null) ? 0 : tableModel.getColumnCount();
    public String getColumnName(int column)
        return tableModel.getColumnName(column);
    public Class getColumnClass(int column)
        return tableModel.getColumnClass(column);
    public boolean isCellEditable(int row, int column)
        return tableModel.isCellEditable(modelIndex(row), column);
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    public void setValueAt(Object aValue, int row, int column)
        tableModel.setValueAt(aValue, modelIndex(row), column);
    // Helper classes
    private class Row implements Comparable
        private int modelIndex;
        public Row(int index)
            this.modelIndex = index;
        public int compareTo(Object o)
            int row1 = modelIndex;
            int row2 = ((Row) o).modelIndex;
            for (Iterator it = sortingColumns.iterator(); it.hasNext();)
                Directive directive = (Directive) it.next();
                int column = directive.column;
                Object o1 = tableModel.getValueAt(row1, column);
                Object o2 = tableModel.getValueAt(row2, column);
                int comparison = 0;
                // Define null less than everything, except null.
                if (o1 == null && o2 == null)
                    comparison = 0;
                } else if (o1 == null)
                    comparison = -1;
                } else if (o2 == null)
                    comparison = 1;
                } else {
                    comparison = getComparator(column).compare(o1, o2);
                if (comparison != 0)
                    return directive.direction == DESCENDING ? -comparison : comparison;
            return 0;
    private class TableModelHandler implements TableModelListener
        public void tableChanged(TableModelEvent e)
            // If we're not sorting by anything, just pass the event along.
            if (!isSorting())
                clearSortingState();
                fireTableChanged(e);
                return;
            // If the table structure has changed, cancel the sorting; the
            // sorting columns may have been either moved or deleted from
            // the model.
            if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
                cancelSorting();
                fireTableChanged(e);
                return;
            // We can map a cell event through to the view without widening
            // when the following conditions apply:
            // a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
            // b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
            // c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
            // d) a reverse lookup will not trigger a sort (modelToView != null)
            // Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
            // The last check, for (modelToView != null) is to see if modelToView
            // is already allocated. If we don't do this check; sorting can become
            // a performance bottleneck for applications where cells
            // change rapidly in different parts of the table. If cells
            // change alternately in the sorting column and then outside of
            // it this class can end up re-sorting on alternate cell updates -
            // which can be a performance problem for large tables. The last
            // clause avoids this problem.
            int column = e.getColumn();
            if (e.getFirstRow() == e.getLastRow()
                    && column != TableModelEvent.ALL_COLUMNS
                    && getSortingStatus(column) == NOT_SORTED
                    && modelToView != null)
                int viewIndex = getModelToView()[e.getFirstRow()];
                fireTableChanged(new TableModelEvent(TableSorter.this,
                                                     viewIndex, viewIndex,
                                                     column, e.getType()));
                return;
            // Something has happened to the data that may have invalidated the row order.
            clearSortingState();
            fireTableDataChanged();
            return;
    private class MouseHandler extends MouseAdapter
        public void mouseClicked(MouseEvent e)
            JTableHeader h = (JTableHeader) e.getSource();
            TableColumnModel columnModel = h.getColumnModel();
            int viewColumn = columnModel.getColumnIndexAtX(e.getX());
            int column = columnModel.getColumn(viewColumn).getModelIndex();
            if (column != -1)
                int status = getSortingStatus(column);
                if (!e.isControlDown())
                    cancelSorting();
                // Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
                // {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
                status = status + (e.isShiftDown() ? -1 : 1);
                status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
                setSortingStatus(column, status);
    private static class Arrow implements Icon
        private boolean descending;
        private int size;
        private int priority;
        public Arrow(boolean descending, int size, int priority)
            this.descending = descending;
            this.size = size;
            this.priority = priority;
        public void paintIcon(Component c, Graphics g, int x, int y)
            Color color = c == null ? Color.GRAY : c.getBackground();
            // In a compound sort, make each succesive triangle 20%
            // smaller than the previous one.
            int dx = (int)(size/2*Math.pow(0.8, priority));
            int dy = descending ? dx : -dx;
            // Align icon (roughly) with font baseline.
            y = y + 5*size/6 + (descending ? -dy : 0);
            int shift = descending ? 1 : -1;
            g.translate(x, y);
            // Right diagonal.
            g.setColor(color.darker());
            g.drawLine(dx / 2, dy, 0, 0);
            g.drawLine(dx / 2, dy + shift, 0, shift);
            // Left diagonal.
            g.setColor(color.brighter());
            g.drawLine(dx / 2, dy, dx, 0);
            g.drawLine(dx / 2, dy + shift, dx, shift);
            // Horizontal line.
            if (descending) {
                g.setColor(color.darker().darker());
            } else {
                g.setColor(color.brighter().brighter());
            g.drawLine(dx, 0, 0, 0);
            g.setColor(color);
            g.translate(-x, -y);
        public int getIconWidth()
            return size;
        public int getIconHeight()
            return size;
    private class SortableHeaderRenderer implements TableCellRenderer
        private TableCellRenderer tableCellRenderer;
        public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
            this.tableCellRenderer = tableCellRenderer;
        public Component getTableCellRendererComponent(JTable table,
                                                       Object value,
                                                       boolean isSelected,
                                                       boolean hasFocus,
                                                       int row,
                                                       int column)
            Component c = tableCellRenderer.getTableCellRendererComponent(table,
                    value, isSelected, hasFocus, row, column);
            if (c instanceof JLabel) {
                JLabel l = (JLabel) c;
                l.setHorizontalTextPosition(JLabel.LEFT);
                int modelColumn = table.convertColumnIndexToModel(column);
                l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
            return c;
    private static class Directive
        private int column;
        private int direction;
        public Directive(int column, int direction)
            this.column = column;
            this.direction = direction;
}any input will be appreciated.
thanks
Peter

The code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).

Event times adding a date

I have a G5, a laptop and an iPhone being sync'd with MobileMe. The iPhone is new last week. I have been sync'ing the two computers via MobileMe for a few months.
Yesterday I noticed on the MacBook in iCal that all the event start and stop times had a date added after the normal date and time. Like this: "10/13/2009 0915 AM 10/13/20"
The "10/13/20" at the end is the new thing. It now shows in all the events for start and stop times.
Under iCal Preferences there is also a new date added after the "Day Starts/Stops At"
Like this: "6:00 AM 1/1/00" Not sure where the "1/1/00" comes from or what it indicates (the beginning of time?)
I can't remove these dates.
The G5 and the iPhone seemed to be fine for awhile until I got a message on the G5 that said that MobileMe wants to change 1200 events in the G5 iCal. I think the MobileMe Cloud now reflects the messed up MacBook and is trying to make the G5 read the same. I turned off all sync'ing of iCal via MobileMe.
I researched the support site to see if this problem has been reported in the past. Found a lot of stuff but nothing that is the same.
I do not see any other strange happenings in the MacBook iCal, just the extra dates. There may be some; but I haven't seen them yet.
Has anyone seen this? Has anyone have a fix or an idea of what to do to remove the extra dates?
Thanks for your help.
John

I would like to drag this question back into the light after a holiday weekend. I'm hoping someone out there can give me a new lead to follow. I have tried everything.
I restored all the data on my computer with a backup that was 4 months old. When I opened iCal the data all had the extra date info added to every event. It was the same.
Either the problem has been there for quite awhile (the laptop is not the principle computer for inputting events; the G5 is) or the problem is something in the MacBook OS that is adding the date info every time you insert a time (since it shows in each event and also in the preferences beside every start/stop time) or it is related only to the Intel MacBook and not to the Power PC G5.
I am out of ideas.
Any help? Thanks,
John

XML..: Problem getting the data in the XML-file..

I'm developing a flash-file for my customer to use when
displaying list of products he's selling.
His list of products is inside a XML-file and he want me to
display an overview of the products inside a datagrid, so when you
click on the product you're interested in the productinfo will be
displayed.
But.. I'm having problems grabbing the data I want as it
seems to me that I have to use the unik ID's for each products to
get the data I want. I've tried adding the unik ID-code to my
action script but it still won't work.
Here's a part of the XML-code:
<Tooldata>
<Store name="N/A" zipcode="0033450" city="N/A" url="N/A"
phone="N/A" fax="N/A" email="N/A">
<Tool unikID="5_0022" control="14" cmnd="update">
<Toolgroupe>Hammer</Toolgroupe>
<Brand>Knipps</Brand>
<Model>K55_Knipps</Model>
<Price>35€</Price>
<Weight>N/A</Weight>
<Soldout>0</Soldout>
<Color>Red/Black</Color>
<Images>
<Images image="5_0022.jpg" prioritet="1" gen_id="16"
desc="MainImage"/>
<Images image="5_0022_1.jpg" prioritet="2" gen_id="16"
desc="Image 1"/>
<Images image="5_0022_2.jpg" prioritet="3" gen_id="16"
desc="Image 2"/>
<Images image="5_0022_3.jpg" prioritet="4" gen_id="16"
desc="Image 3"/>
</Images>
Now, the code above is only one item/product. But there are
several proucts listed in the XML-file and I find it hard to get
the product and the product info that I want to be displayed.
Here's my action script:
var xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
xmlLoader.load(new URLRequest("ToolData.xml"));
function LoadXML(e:Event):void {
xmlData = new XML(e.target.data);
ParseBildata(xmlData);
function ParseTooldata(TooldataInput:XML):void {
trace("XML Output");
trace("------------------------");
trace(TooldataInput.Store);
If I want to trace the images I just write
"trace(TooldataInput.Store.Images);
But if I want to trace one unik tool it's impossible. Well,
maybe not impossible.. I just don't know how to do just that.
When you trace (TooldataInput.Store); you get all the tools
at that store. But how do I trace only one tool using the unikID??
Thanks a lot in advance!

Ace,
When using E4X if you have multiple nodes at the same level
you should be able to access them as an XMLList. Looking at your
XML you should be able to access each <Tool> node as:
TooldataInput.Store.Tool[0];
TooldataInput.Store.Tool[1];
or as an entire list
TooldataInput.Store.children()
WL

Problem adding DataView in SharePoint 2013

Hello everyone, i have one problem, so please help me... :(
I have created site collection in SharePoint 2013 with one subsite. I have created a list in parent site (site collection) and when i am adding Empty Data View (with SharePoint Designer 2013) i can not see the list in Data Sources???? What am I doing wrong?
Tnx,
Eli

Hi Eli,
Here are the steps I performed when add dataview in SharePoint Designer 2013 for your reference(I assume you have create a list named list1 and document library named doclib):
Open SharePoint Designer > Open sites > enter site collection:
http://sp/sites/sitecollectionname
Expand All Files > locate doclib, right-click it > New ASPX > Rename it as test
Double-click test > Edit file > click yes to open in advanced mode
Insert tab > DataView > Empty DataView
Locate <DataSources> </DataSources> part and insert tab > Data Source. Then you could choose your list.
Then you could choose the fields you would like to add in the Data Source Details panel in the right.
Regards,
Rebecca Tu
TechNet Community Support

Error in adding PRIMARY Data file of SQL Server 2005

Hi Experts,
I am using SQL 2005 as back end database for SAP ECC6. Due to Space problem in PRD data volume, i have added PRDDATA4.ndf file in SSMS ( SQL Server Management Studio) and saved. But, suddenly i got one more idea and extended the file size of exisiting PRDDATA1.mdf, PRDDATA2.ndf & PRDDATA3.ndf immediately i removed the PRDDATA4.ndf file before starting the service. But, while seeing in SAP using ST04 it showing the PRDDATA4.ndf with error message of file missing. What i have to do now? How can i delete the information showing in ST04. But it is not showing in SSMS.
Please help how to solve this.
Regards,
B.Sudharsan

Hi,
Following solution might help you to resolve the issue.
Solution1:
Issue happens because universe connection to the Database is not responding and the Data Source Name is not configured to write SQL Server 2005 database.
Resolution
Created new DSN connection under SYSTEM DSN to SQL Server 2005 Database.
Import the universe from the designer.
Go to File->Parameters.
Edit Connection.
On the Database Middleware Page expand SQl Server 2005->Select SQL Server 2005 driver.
Change the DSN to new DSN connection
Test the connection.
Save the Universe and Export it to the repository.
Solution2:
I am taking Oracle as an example over here.
This can be caused when the SQLNET.ora is located in a remote location using mapped drives.
Resolution
To resolve,
check the registry [HKLM\SOFTWARE\ORACLE] you should see a folder called HOME0
look for any paths that contain a mapped drive partition
Change the mapped drive letter to a UNC path (
server\folder)
Open a command prompt and do a tnsping using the tnsname and verify the location of the SQLNET.ora or TNSNAMES.ora
If the path is not updated to the new path
Reboot the server
Regards,
Sarbhjeet Kaur

Problem with universal data cleanse

I have problem with universal data cleanse.
I am using DS 3.2.x (12.2.2).
I created:
Dictionary: TEST
Classification: TEST_CL
Custom outputs: category: TEST_CAT
Dictionary Entry:
Primary: BO
Classification: TEST_CL
Gender: Unassigned
Secondary information:
When used as: TEST_CAT
Standard: Business Objects
Rule file:
DataCleanse Rule File v2.0;
TEST_CAT = TEST_CL;
action = TEST_CAT;
TEST_CAT = 1 : TEST_CAT : 1;
end_action
Data Cleanse:
Input: Multiline1
Options:
Parsing Dictionary: TEST
Rule file: .../test_rules.dat
Break On Whitespace Only: Yes
Parser Sequences Multiline1: TEST_CAT
Output:
Parent_component: TEST_CAT1
Generated_field_name: TEST_CAT and RULE_LABEL
Generated_field_class: parsed/standardized
Contenet_type: none
and EXTRA field
I wanted to replace word u201CBOu201D with the standard words u201CBusiness Objectu201D, but I have result: there is "BO" in the extra field,
there are "null" in others fields.
What am I doing wrong?
Thanks for all help!
P.S. I don't have cleansing packages installer.

There seem to be a couple of things going on here:
1. If you are using your custom dictionaries, then you have to map your input to MULTILINE1 and enable the custom parsers - just something to be aware of
2. You mentioned that you made some changes to the existing dictionary and you are not seeing any changes. To be clear, do you have different TEST and PRODUCTION environments? Or is it the same environment except that you have a local DS repository and for the dictionary you are pointing to another repository (using Dictionary --> Manage Connections)?
Having the dictionaries on a different repository should not make any difference as long as you point to them in your designer using the Dictionary --> Manage Connection option.
So I think there may be some issue with your job setup and/or dictionary values need to be looked at. You can start by adding another output field named "EXTRA" to see whether or not your data is getting parsed at all. Also, make sure the entry "CLEANME" is classified as FIRM_NAME_ALONE in the dictionary and that you are selecting the correct dictionary name in the Datacleanse Transform options.

Facing problem in saving data without overlapping in for loop

Hi,
I am facing problem in writting data withou overlapping if i run outer loop for 2 or more times and in inner for loop i am getting array in a way I want but when i try to build that array with logging temperature i am not able to do it. Please guide me through ths.
Thank You
Hnagpal
Solved!
Go to Solution.
Attachments:
data storage.vi ‏31 KB
what i am getting.xlsx ‏10 KB
what i want.xlsx ‏10 KB

Thanks odessy27, Matthew Kelton, for replying.
Matthew Kelton: Thanks for the solution i am adding outer loop so that i can increase the number of row. I am using it for some application which require me to save data several time and i used random number here but originally instead of random number there will be power meter reading and i want to save it every hour and plot it. I am also attaching a file what i made I don't know is this a good way or not. Actually i will also beneeded to plot a graph. But again how to increase a row and without replacing previous data i can write another row.
Yes i want to make one row for each iteration.
I attached both files in 2009 version.
Thank You
Himanshu Nagpal
Attachments:
desired result.xlsx ‏10 KB
data storage (1).vi ‏26 KB
data storage.vi ‏37 KB

Urgent! Problems with bridge JDBC-ODBC

Hello,
I have found out that JDBC-ODBC bridge in JDK 1.4.1 don't works fine, because, if you want to store text largest 254 characters in a field type text in one record of a Access database's table, it generate a SQLError, I have tried with EasySoft JDBC_ODBC and it works, with it I could store text fields largest than 254 characters, but I have new problems, EasySoft bridge is not free, and don't let store nulls in fields type Date [with PreparedStatement x, x.setDate(theDate)] (raise a SQLError), in the other hand, JDKs bridge do it. Somebody knows if exists JDCB-ODBC free drivers more suitables than JDK's includes, or if exists upgrades?
Is very urgent!, Thanks a lot
(Sorry, my english is very poor)

I have tried it, Is there where I found the EasySoft's JDBC-ODBC driver, but the result is: one problems out, yes, now with this driver I can store String largest 254 characters in fields type MEMO of a table in Access Database, but two new problems, 1st. is a trial version, (requiere paid), and 2nd. don't let store nulls in fields type Date when JDKs JDBC-ODBC bridge lets, and the aplication needs leave this fields blanks.
Any other idea?
Thank

Problem adding Video to Captivate Slide

Hi,
I'm having a problem adding an FLV video file to Captivate. Basically, after I've published to a SWF file, the video doesn't appear on the slide at all. It's just blank.
After researching a bit, I found that the FLV file MUST include *metadata*.
However, I added medatada with VLC Media Player, and it still shows the same behavior. Must it include a certain *amount* of metadata? Is there a *type* of metadata without which the video will not show?
Adobe's Help thread talks about something called the "Flash Video Kit" - is that a stand alone product or an extension of another product? Is it free? Are there any other free alternatives?
I'm just very confused.
Thank you!

I ended up answering my own question. But just in case this helps anyone else, I'm going to post my solution.
Essentially, I just re-created the video in MP4 format. Then I used MetaZ (for Mac) to write Meta Data to the video. Lastly, I imported the video as an object and when I published the video, Captivate transmuted it to the necessary FLV format.
Now the video displays properly.

I've imported PowerBI designer file. so why do I keep getting 'It looks like you haven't added any data to this dashboard'

This might be related to my post about not being able to enter a column name in the where clause, and Q&A always using COUNTRY_OF_ORIGIN.
Anyway, I took my original designer file, removed the first page of the report I dd, then added a new page, but this time with a visualisation of sales amount by product name. Saved the whole lot to a new pbix file, and uploaded it into the PowerBI
cloud. Pinned the visualsation to a dashboard, and started to enter a query.
Up pops the message 'It looks like you haven't added any data to this dashboard' etc, etc.
But, but, but I have uploaded the data. It's all in my pbix file. It seems that PowerBI usese the first column of my first dataset as the master for column names in the where clause. And if you do not have a visualisation that uses that column (i.e. COUNTRY_OF_ORIGIN
in my case) then Q&A doesn't think it has a dataset.
I am going to try some other tests to see if I can persuade PowerBI and Q&A to do its business properly.
Angus

The reset will not erase the virus but the reset can be done up to you.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Active directory response: 00002098: SecErr: DSID-03150A48, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0

Hi All,
I have just added my first 2010 exchange server to our organisation.
Upon trying to enter the product key, i get the following:
Error:
Active Directory operation failed on DC01.myorg.com. This error is not retriable. Additional information: Insufficient access rights to perform the operation.
Active directory response: 00002098: SecErr: DSID-03150A48, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
The user has insufficient access rights.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.Ex6AE46B
Exchange Management Shell command attempted:
set-exchangeserver -Identity 'CAS01' -ProductKey 'xxxxx-xxxxx-xxxxx-xxxxx-xxxxx'
I get a similar error when trying to run the cmdlet New-ClientAccessArray.
It would appear there is a inheritance of permissions issue somewhere but where. Most other references to this error are on mailbox moved where the error is with the mailbox being moved. where is it here?
Any thoughts? This is driving me mad :(

Hi,
After much research on the forums I found this solution that worked for me:
Technet
Article
Tanks,
Arthur.

Problems adding Bridge Data to prepaid (Allset) iPhone5

Similar Messages

Maybe you are looking for