Problems after a "back out"

Dears:
I'm experiencing problems with my router WRT54G Version1.1/ The problem began after a power black out.
I have checked the ISP connection already (connecting directly one of my computers to the modem), it is working fine, communication with the modem and internet browsing all normal.
I have observed also that the router is gathering the IP which our ISP send or assign. It means the router gathers it without problem therefore WAN handshaking is established.
Router LAN side is working properly, all computers connected to LAN side work fine. IP’s, etc. also are ok.
Router bridging between LAN and WAN (probably NAT function) does not work at all. Any computer from the LAN side can’t go out to internet even though using factory default settings.
Many configurations were tested, including upgrading the firmware to latest version but problem still remain.
Have you have this issue before?
Our problem happened after a black out. Before taking the decision to buy a new router due a hardware problem I would like to hear from some of you if it could be related with the router software, flash memory, etc, if so, how to address it?.
Waiting for your reply
Best regard

Thanks my friend:
Let me tell you that I've solved the problem. I downgraded the firmware to my last working version which was 4.30.5 and all come to normality.
Believe it or not, the last version 4.21.1 did not work in my router. I was trying to do a tracking of the firmware versions and I found a discrepancy between the last two for this model.
Fortunatelly I had the previous one otherwise I wouldn't be able to restore the fucntionality of my router.
According to the information tracked in my backups was 4.20.7 after that, version 4.30.2 & 4.30.5 were issued. (May,2006) That was the last time I upgraded the firmware.
Actual version posted in linksys web site is 4.21.1 (the latest firmware) despite it contains the fixes described in versions 4.30.2 & 4.30.5 plus solving access restriction problem does not work in my router. After many tries, I gave up and left loaded the version 4.30.5
Now everything is working as usual but still with the access restriction issue.
I guess I'll leave it as it is.
Hopefully this info can also help others.
Regards,

Similar Messages

Problems after regressing back to 6.0.5 from iTunes 7...

After regressing back to 6.0.5...when I click on the iTune icon all desktop icon's (resolution) are enlarged to 800 by 600 pixels,and iTunes does not open. After repeated attempts iTunes comes up in the enlarged format that extends off page. Changing screen resolution (to 1024 to 768 pixels) in Display settings is just temporary. How do I correct this problem?
Dell Inspiron 1150 Windows XP

I've restored my ipod using iTunes 7 on a PC and it appears to be working.... I'm slowly and carefully loading up the ipod with music wondering if at some point I'll hit a damaged disk sector which might have caused the problem?!?!

Problem after downgrading back to ITv.6....missing music during iPod synch?

I recently happily downgraded back to iTunes v.6 after experiencing a nightmare with iTunes v.7. Since re-installing v.6, everything is fine except for one strange and annoying problem. I'm hoping someone can help, so here goes....
Now, when I synch/update my iPod as I had always done (not automatically, but with selective playlists checked), about 400 of 1700 songs do not transfer from my G4 to the iPod. However, when I switch to update with the automatic option to include all playlists, all 1700 songs transfer over to the iPod. I believe I've narrowed this problem down to one particular playlist which may not be getting recognized by the iTunes library. In other words, I want this one playlist to appear in iTunes, but not on my iPod. But, if I try to update with this one playlist unchecked, 400 songs do not transfer over. This seems odd since all music files (mp3s) from all playlists are located in the iTunes music folder on my hard drive.
So, my question is....how can I go back to updating my iPod to include all of the 1700 songs in my library, but without the one particular playlist (which is quite large)? As was the case before the iTunes v.7 debacle, is there a simple way to get my library to recognize the particular playlist so I can update my iPod selectively without putting that playlist on my iPod? I've tried to do some online research before bothering the wise people on this Board and it would seem that I either need to: 1) somehow import that particular playlist back into my iTunes library or 2) create a new iPod library file which I understand may cause me to lose my playlists and comments. I'm afraid to do either without some guidance, for fear of making the situation worse. I'm not very technical and I'm guessing there's a simple fix for this, so I'd sincerely appreciate any help and advice. Thanks very much.

Here's the log:
Process:
Safari [23855]
Path:
/Applications/Safari.app/Contents/MacOS/Safari
Identifier:
com.apple.Safari
Version:
Build Info:
WebBrowser-75345910~1
Code Type:
X86 (Native)
Parent Process: launchd [278]
Date/Time:
2014-05-07 16:14:33.635 +0300
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
235635 sec
Crashes Since Last Report:
22383
Per-App Crashes Since Last Report:   13
Anonymous UUID:
6AD6BC48-95D3-42C3-A22F-66FAE28F420B
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/lib/libc++.1.dylib
Referenced from: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/WebKit2
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please.

Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Problem after running out of battery.

My MACBOOK PRO running on OS X Lion shut down the other day after completelly running out of battery. Ever since, I have started having problems with my browsers. Certain pages such as facebook wont load aswell as videos. On top of that it keeps asking me to verify the certificates of any page I want to go to and it keeps telling me that my date and time have been set to 1.1.2008 (although i changed it back the first time i saw it and since the date is still alright).
What do I have to do?

After charging at least overnight try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I recently synced some old photos onto my ipod touch and they briefly appeared on google maps in geographical/time date order. Couldnt bring it back up after Id logged out. id like to be able to do it again, any suggestions?

I recently synced some old photos onto my ipod touch and they briefly appeared on google maps in geographical/time date order. Couldnt bring it back up after Id logged out. id like to be able to do it again, any suggestions?

Have you tried the following document, kohida?
[What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch|http://support.apple.com/kb/TS1502]

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

The scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture.

the scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture. how can i stop safari from showing the content of my accounts?

Try calling Tech Support, they should be able to check to see if theres a lock and try to help you reset it, I had to call and get my account unflagged, for something that I didn't even do.

HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Problem with itunes after reverting back to mavericks from yosemite

I can't get iTunes to open my library after reverting back to Mavericks from the beta Yosemite. It says "iTunes cannot open this library because it was created with a newer version of iTunes." It then asks if I want to download the latest version and when I click download it takes me to the app store and says that I have the latest version. Which was downloaded when I was running Yosemite. I even downloaded the latest version from the website and it still won't open the library.
Any ideas?
Thanks in advance for your input.
Bob

I don't know which actual versions you are seeing because I don't have Yosemite. You're not really supposed to discuss any issues related to beta test versions on the open forums. I believe there is an iTunes 12 out in beta which may have been what you were running. You don't say how you reverted to Mavericks.
The underlying issue is the file called "iTunes Library.itl" Once you open it with a newer version it can no longer be opened by an earlier version. However, when you do an upgrade it makes a copy of the older version and you can rename this to make a file which can be opened with the older iTunes. However, this will not reflect any changes made to your library. Any media added will still be present in the media folder but it will have to be added to the old library.
https://discussions.apple.com/message/20401436#20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Beta software testers are advised not to run software on their main computers, and will usually be familiar with how to restore to older versions and the working of computers. The new public beta with Yosemite is a change in behavior for Apple but of course means a lot of people want to be a tester but don't really know what that means.

Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out

Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out because it cost me to high and if this is not activated i have to bear a huge loss.i am a loyal customer of apple from a past 5 years.thank you for your cooperation

Yes, this is activation lock. Return the phone for a refund, as it is useless without the activation information of the previous owner.

Fixed my router 'connect' problem after coming out of sleep

After almost 2 weeks of agonizing over this, I think I finally fixed the problem that I was having of my Macbook Pro not wanting to reconnect to my router after being brought out of sleep.
Simply, all I did was try a Wireless G router instead of the N one that I had been using and I have yet to experience the problem again! I had been using a Netgear Wireless N (even forcing it to G did not help) and am now using a Linksys Wireless G instead. Not one issue so far!!

Apple Store currently thinks it's a hardware problem

How can I find my Imessages after I signed out and I sign back in

How do I get my IMessages after I signed out , I sign in back and they are gone, help please

Only by restoring from backup if you made the backup before you signed out.
iOS: How to back up and restore your content

I am trying to help a friend who`s imac is giving her trouble. when the user logon is typed the machine begins to load, then in about a minute, kicks back out into the logon screen. ANY insight to her problem will be greatly appreicated?

I am trying to help a friend who`s imac is giving her trouble. when the user logon is typed the machine begins to load, then in about a minute, kicks back out into the logon screen. ANY insight to her problem will be greatly appreicated?

Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
http://support.apple.com/kb/ts1417

Problems after a "back out"

Similar Messages

Maybe you are looking for