Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanks

Hi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen

Similar Messages

System problems after applying patches

Hi all,
I was patching our netweaver 2004s system and now I am not able to use any transaction anymore.
First I updated the Abapkernel and the SPAM itself. Then I started applying the Abap support packages. I had no problem applying patch level 7 and 8. When I imported patchlevel 9, the system did not respond anymore. Every time I tried to execute a transaction I got a shortdump.
Do you have any idea what could be the problem?
We restored the system and now I got a similar error already when updating SPAM.
Thanks & Regards
Cornelius

Hi,
Just try to run RSXMB_ACTIVATE_ICF_SERVICES program from SE38 and see whether it works or not.
---Satish

Problems after applying patches - please help

Hi All,
i've just applied some patches last week to one of my CF servers (CF 8.01 on SBS 2003). I followed the instructions and didnt really have any issues i noticed until yesterday. The debugging output on screen is gone, replaced by a 500 error and a ton of error codes like this:
[code
]ROOT CAUSE:
java.lang.NoSuchMethodError: coldfusion.server.DataSourceService.executeQuery(Ljava/sql/Connection;Ljava/lang/String;L java/lang/String;Lcoldfusion/sql/ParameterList;Ljava/lang/Integer;Ljava/lang/Integer;Ljava /lang/Integer;[IIIZZ)Lcoldfusion/sql/Table;
          at coldfusion.sql.SqlImpl.execute(SqlImpl.java:329)
          at coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:838)
          at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:528)
[/code]
i also cannot view the logfiles in CF administrator. Similar error code as above - full page.
Patches i applied were:
APSB12-06
APSB11-29
APSB12-15
not necessarily in that order (i followed the order specified on adobe's site).
any help or guidance is greatly appreciated-i can provide any info that may help. t
thank you very much

Hi
First of all you might have taken backup of files before applying patches. If yes then please replace them first to stabilize it. Once that is done then apply patches one by one and test it before applying other one. That should help and identify the issue if there is any.
Regards
Swaraj

My query is not executing properly after applying patches(bi.7

iam working bi.7 support package 13
after applying patches
my query is not executing properly in production my problem with FI queries
the query is executing properly but ihav created newformula using formulavariable that fields are not getting data in report if i click on currency conversion iam getting popup but currency translation coversion list is not coming and currency type(target currency also not dispalying)
but if i execute same query in development its working properly newformula fields are getting data and currency conversion also working in development
can u please help me in this issure
i hope as soon i will get solutions from bw gurus

That currency conversion problem is solved
i checked TCODE:RSCUR IN PRD its not showing any details
again i checked in dev and moved all currency types dev to production
now its wokring
i hope check with this it will work

Issue with updation of PAN details in ESS after applying patch

Hi ,
We have applied a new patch recently,
as follows:
SAP_HR - To patch - 49
EA_HR - To Patch - 49
When users are trying to update PAN details it says throwing error " fill in the required fields,"
i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
Can any body come accross this issue please give me solution as this issue has become critical.
Thanks in advance .
Regards,
Evani

Duplicate post.
After applying patch , error found on bottom of signon screen
After applying patch , error found on bottom of signon screen

Portal Runtime error after applying patch 12 to portal

hi experts,
i m getting following error
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.portal.webdynpro_ws/com.sap.portal.content_administrator/com.sap.portal.wd_content_administrator
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
Exception in SAP Application Integrator occured: ApplicationIntegratorException.
Exception id: 09:30_22/01/08_0005_16892850
See the details for the exception ID in the log file
after applying patch 12 in portal
i m getting this error in guided procedures,Universal worklist ,webdynpro workset undfer content administration
Please suggest me the solution
regards,
vani

Hi Vani,
Just go to the System Configuration and UME configuration.
Now go to user mapping tab, and remove the entry for a reference system. Then check for the issue if persists, restart system.
Hope this helps!
regards
Atul Shrivastava

Internet Procurement responsibility error after applying patch

Hi Guru(s):
After applying patch 5156915 we get this errro when we select i Procrurment responsibility:
The POR SSP HOME function is not available under the Internet Procurement responsibility.
iProcurement is installed.
Any ideas would be most welcome thank you.
EBS 11.5.10
Edited by: Dan A on Dec 16, 2008 9:10 AM

Thanks yet again to Hussein.
I am a little worried that I couldnt find that same document.
I entered in ML "The POR SSP HOME function is not available" ....and that document did not appear.
Then I entered it with underscores : "The POR_SSP_HOME function is not available" ... and now I can see the doc.
How did you do your search?! I am guessing you used udnerscores or else something different? ? ?
Thanks, and still curious,
DA
By the way we are told to "clear" the _pages directory. I would do this with
cat /dev/null > oa_html , etc ?
Edited by: Dan A on Dec 16, 2008 9:44 AM

Login page not coming up after applying patch 12374730

Hi ,
Login page is not coming up after applying patch 12374730.
OS : Solaris 10
Application release 12.1.3
Thanks,

Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein

Invalid package WWSBR_IMT_SERVICES after apply patch 3.0.9.8.1

After applying patch 3.0.9.8.1, get an invalid package.
Upon trying to compile the package WWSBR_IMT_SERVICES the following error
occurs
SQL> show err
Errors for PACKAGE BODY WWSBR_IMT_SERVICES:
291/7 PL/SQL: Statement ignored
291/20 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
293/8 PL/SQL: Statement ignored
293/21 PLS-00201: identifier 'CTX_DOC.PKENDCODE' must be declare
We have NOT installed oracle intermedia... why is this error occuring?

According to BUG 2120388 this is ok!

Error after applying patch set 10.1.3.4.0

Hi everyone,
I downloaded the patch set 10.1.3.4.0 from [http://www.oracle.com/technology/software/products/ias/htdocs/101310.html] and intalled it on my machine but after the installation finished, I found problem in runing Oracle Process Manaer Console. When I try to login, it redirects to DomainPickup.jsp and after entering oc4jadmin id and password below message appears: No domains accessible to the user logged in.
When I click on Goto BPEL Admin and try to create a new domain, it does not accept "default" as domain id: it says "Domain already exists." when I give different name, it shows this error:
Exception
Operation failed because:
Domain creation error.
An exception occurred while attempting to create the domain "sample" at path "c:\oracle10gR1\product\10.1.3.1\OracleAS_1\bpel\domains\sample". The exception reported is:
I was using SOA suite 10.1.3.0 and it was working properly before upgrade.
I will appeciate if someone can help me to fix this problem. I could not found any note for applying this patch on download page too.
Thanks
Esfand

Hi Adina,
I tried to perform all the steps explained there but I might have missed some parts which I'm not getting it down. I could figure out the cause of problem after I searched the oracle forums for several times. It seems that this error is because of data-source settings and database server. The bpel engine can not connect to database anymore. This means that during the pachset the database settings has been altered somehow but when I check the XML files, I can't find any mistake there.
I have not worked with Oracle Lit database and do not know how to manage the database it creates therefore, I decided to install the Oracle 10g Database XE, when I go through advanced installation of SOA suite 10.3.0.1 after running IRCA, the installation is finished successfully but the same problem exists. When I checked the Connection pool in Oracle AS, it shows error from NLS data and now I'm in infinite loop how to fix this problem. After many installation / deinstallation I could not fix it so I decided to install the SOA Suite in typical mode and then connect the BPEL to oracle Database later. After the installation, I changed 3 data sources defined in Oracle AS along with its connection pool to connect to my Oracle 10g XE database having BPEL schema but it still raises some more exception and now, I have no idea what to do?!!!!
It's about 10 days that I'm struggling to get this installation done but I have not succeeded yet. I believe It should not be so hard and complex to have Oracle Suite 11g TP4 configured as it appears to happen for me. Oracle products all have straightforward installation process but this once is killing me.!!
I will appreciate any further help for windows installation.
Regards
Esfand
Edited by: user3788199 on Sep 4, 2008 3:59 AM
Edited by: user3788199 on Sep 4, 2008 4:02 AM

Dump error after applying patches

Dear all;
after applying SAP_BASIS Packs (SAPKB62019 and SAPKB62020) the transaction was canceled before finched implementing the patches and We are receiving ABAP dump errors while executing any transaction ( syntax_error)
could you help me to resolve this proble?
thanks and regards.
Issam CHIBOUNI

Hi
SAPKB62020
           Symptom: After you import Basis Support Package SAPKB62020, you may experience a change in the system response at different points in an R/3 Enterprise system. This problem can be seen in the sudden appearance of screen elements, for example, or in changes in the process flow of transactions. In extreme cases, it can also cause data corruption.
           Reason: Support Package SAPKB62020 included an incomplete correction to BAdI processing that caused the execution of BAdI implementation of deactivated Enterprise Extensions.
           Solution: You must refer to SAP Note 601742. Import Basis Support Package SAPKB62023 as soon as possible (planned release date is May 06, 2003) or implement the additional correction instructions as described in Note 601742.
thanks and regard
Khurshid

Need Urgent Help: Solaris fails to come up after applying patch 120012-14

Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AM

Solve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.

Avoiding a full reinstall of Acrobat 9/X after applying patches

After applying a patch, we redeploy the GP and our users get a full reinstall of Acrobat which takes a longer amount of time than if only the smaller patch were being applied. Is there a way around this so every time we patch and redeploy Acrobat (even the smallest patch), our users don’t have to wait through an entire reinstall?
Thanks

How do I stop an installation process?
you can stop any running process (including an adobe installation) using your activity monitor.
How can I get Acrobat X Pro reinstalled on my computer?
i don't see any reported problem here, http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
but you can check other user's experiences here, http://roaringapps.com/apps:table
and you can check how someone else solved the same problem (with a different version), Re: Acrobat XI Pro wont install on Mavericks Mac

Problems after applying latest Airport update.

I have a core duo macbook and was able to maintain a connection to my wpa secured wireless network before running software update a few days ago. After doing so, I can't maintain a connection. It simply stops working.
I disconnect, reconnect, and os x says there was a problem connecting to my network. I turn airport off then back on and still get the same error.
I am still able to sign onto other networks. My ibook and powerbook have no trouble connecting and maintaining a connection to my wpa secured network when my mac book is having trouble. I have not applied any software updates to those recently.
After rebooting the macbook, I can connect just fine. This happens once every 3 hours or so and is driving me nuts. Anyone know how to rollback the update or know what might be wrong?
Thanks,
Todd
MacBook 2.0ghz Core Duo (Black) Mac OS X (10.4.8)

hello,
i have the same problem after the update. i see some members on the forums suggesting to turn off the wifi security helps, but who wants to give free wifi to there neighbors. with my situation, my router has a settings for "WPA-AES" or "WPA-TKIP." i had my router set for "WPA-AES" before the update, things works fine, after the update i tried to delete the key chain entries of my wifi connection and the preferred network list, which didn't help, but changing my router to be "WPA-TKIP" helped. my connection works normally again, i can reboot, put the macbook to sleep and it reconnects fine.
hope this might work for you if you have this "TKIP" setting for you wifi router. i have a buffalo WZR-RS-G54 router, btw.
good luck.
dang
macbook 2.0ghz, 2g ram, 80g hd Mac OS X (10.4.8)

Icons for the Reports missing in Workspace after applying patches

Hello Gurus,
I have installed 11.1.2.2 on one of my VM's and then applied the 11.1.2.2.300 patch on it.
I have followed the Read Me for all the patches before applying them.
After applying the patches however the icons for the Reports in workspace
[IMAGE ON THE FOLLOWING LINK]
http://i45.tinypic.com/29f6mc0.png
I have reconfigured web server at the end but that did not help. Any help will be highly appreciated.
Thanks
HyperionEPM.

Hello Nick,
Yes all the components show green and I can access the reports without any issues. Its just the icon that does not show up.
I will check the logs you have mentioned to see if there are any exceptions in them.
But the issues started up after applying the patches for 11.1.2.2.
I have checked the location path mentioned in Weblogic.xml in raframework.war file and the path points to the correct folder location where the folders mt and mt_thumbnails are located.
Is the any other way out?
Should I delete the contents inside the tmp folder located in RAFramework0
or
Can reconfigurin Reporting and Analysis framework services help in resolving the issue?
Please let me know.
Thanks.
hyperionEPM

Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

Similar Messages

Maybe you are looking for