Problems after converting from 1.3SE to 1.4SE

I have a very vexing problem that I need some help with.
When I run my program using SDK 1.4, weird problems crop up -- controls don't always respond to clicks (they seem to be pressed but are not released), the menu fonts are oversize/accelerators are not displayed, table column headings are separated by a small gap, etc. These problems do not occur when I run under 1.3.
Any suggestions are muchly appreciated.
Cheers,
Dawn

I know the feeling. Especially with 1.4.1, which if you read down through these reports, is not working very well. In 1.4 they rewrote the "focus handler" and that apparently has introduced a huge number of problems. I've given up on 1.4 as it is now and I'm using - with some degree of success 1.3.1_02 (the current one is 1.3.1_06).

Similar Messages

Image size problem after converting from Managed files to Referenced files.

I recently moved to Referenced files for all my images. I use a plug-in (Graphic Converter 8.8.2) to resize all images to a consistent size (1440 pixels wide, landsacpe format) for a web app that I use (Sandvox). With Referenced files, when I drag and drop the externally processed image, it shows up at exactly one-half the correct size (720 pixels). As a test, doing exactly the same opeartion with an Aperture library utilizing managed files, there is no problem...it works as expected.
As a temproray work-around, I found that instead of dragging and dropping, I use the Aperture Export function, everything is correct. This is not really what I want to do because I have a lot of images to process.
This is Aperture 3.5 and Mavericks, but the problem was there with with Aperture 3.4 and OS 10.7.5.

Thank you for the suggestion and running the test. I changed the Preview settings to 1440, and then 2560 and finally, Don't Limit. Quit and relaunch Aperture between each setting. No luck.
But you gave me a hint: maybe the problem has to do with the images being first Managed and then moved to Referenced files. So I tried one that has never been a Managed file and everything works correctly! Don't know if this is a bug or a feature.
Mystery solved, but I still have a lot of images to reprocess.
Thank you for the help.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?

What happens when you click the Save/Download button after the file conversion is complete?

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Muse 2014 - Problems after converting a Site with Safari

After converting a site to muse 2014 and exporting it to html the JS-error message "Einige der Dateien auf dem Server fehlen oder sind ungültig. Löschen Sie den Browser-Cache und versuchen Sie es erneut. Wenn das Problem weiterhin besteht, wenden Sie sich an den Autor der Website." ("Some of the files of the server are missing or incorrect") apears when opening every site.
I did not made any change to the site itself, the site was only converted and re-exported.
The error is only shown with Safari, but i only tried with IE 10 under Windows

When you republish your site, make sure you upload all files. New versions of Muse may change JavaScript files or CSS files for pages that you have not changed. The error message is indicating there are expected files that are missing or that files it found and loaded were generated from an older version and need to be updated.

Problems after upgrading from 10.2.3 to 10.2.8

After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

Hello rick,
First of all, welcome to the Apple discussions.
* How did you upgrade the OSX 10.2.3??
* Did you use the combo update?
* Did you run the dick repair permissions before an after
Here is the Combo Update for OSX 10.x
Combo Update
An here is how you use the disc repair permissions
About Disck Repair Permissions
Applications Quits
Let me know if so ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~))

Receiving a message in my word document after converting from a PDF to word. Please advise

After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.

Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David

Problems when converting from pdf to word

I am a translator and I get most of my work in pdf files. So I convert the pdfs into words to be able to change the text and edit. However, when dcuments are converted from pdf to word I have found they become very unstable and difficult to work with to the point I usually end up not using the coverted file. Is there any place I can go for training about what to do with those documents? Can anyone relate to this problem?
thanks

Hi patryba,
You can access ExportPDF here: Adobe Acrobat.com.
Please let us know how it goes!
Best,
Sara

Abobe v8: Problems with converting from word 2003 to PDF

I use one of those free conversion tools, since i am a student. My problem is that i have a word document with a unique page margin. When i convert from word 2003 to pdf everything gets converted except the page margin which is much bigger then it's supposed to be. Do anyone know how i can fix that?, any help are appriciated.
Kindly Erik

You cannot fix anything in Reader. If you have a problem with the tool
used to create your pdf, please ask in their forum.
Mike

Sound Problems After Restore from Hibernate Using uswsusp and pm-utils

I see mention of using /etc/pm/config.d/module to recycle certain kernel modules during suspend. Do I need to suspend all modules?
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[aj@mbp62 ~]$ lsmod | grep snd
snd_hda_codec_cirrus 8790 1
snd_hda_intel 36904 1
snd_hda_codec 149633 2 snd_hda_intel,snd_hda_codec_cirrus
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 8 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
soundcore 5450 1 snd
[aj@mbp62 ~]$ cat /etc/pm/config.d/module
SUSPEND_MODULES="bcma b43 snd_hda_intel"
SLEEP_MODULE=uswsusp
Any pointers?

This morning, I rebooted for half an hour without success:
After resume from hibernate, most of my machine froze like described above.
After first reboot, it worked for 1 minute, then I had a full freeze (nothing worked... no mouse, no normal keys, no magic keys, screen frozen...)
After second reboot, my wifi adapter was gone. It showed up in lspci and looked like this:
04:07.0 Network controller: Atheros Communications Inc. AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] (rev 01)
Subsystem: Atheros Communications Inc. Device 3071
Flags: 66MHz, medium devsel, IRQ 22
Memory at feb70000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] #80 [0000]
...but not in ifconfig. I found the following in dmesg:
[ 7.106070] ath: phy0: address test failed addr: 0x00008000 - wr:0x00080008 != rd:0x00000008
[ 7.106181] ath: phy0: Unable to initialize hardware; initialization status: -19
[ 7.106287] ath9k 0000:04:07.0: Failed to initialize device
Problem persisted over 10 poweroffs/reboots (also hit the "on" button a few times with the pwoer cable disconnected, trying to make it "reset" or something. Did not help this time, might have been coincidence the last time that worked.

Problems after resuming from hibernation

I’ve been getting horizontal lines and sound distortion after resuming from hibernation. Has anyone had similar problems or found a solution for this yet? I’m on Lion OS X 10.7.3.

Rorschach wrote:What freezes? Just X or the whole kernel? Can you ssh to your machine?
Now it doesn't freeze anymore. I really don't know what the heck is going on on my machine.
Next time that the machine freezes I'll try to ssh to it. Thank you for pointing this out.
Last edited by ArchArael (2010-03-26 15:56:17)

Anyone's MacPro have problems after waking from sleep mode?

After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

Performance problems after Update from 7.6.00.37 to 7.6.03.15

Hi,
after the Update from 7.6.00.37 to 7.6.03.15 in our live system we noticed a lot of performance problems. We have tested the new version before on our test system, but there don't noticed effects like this.
We have 2 identical systems (Opteron 64 bit, openSuse 10.2) with log shipping between them. We updated first the standby system, switched from online to standby (with copy of cold log) and started the new server as online system. After that we run a complete backup (runtime: 1 hour) for starting a new backup history and for activating autolog. Then
With the update we changed USE_OPEN_DIRECT to YES, but the performance of the system was very slow afterwards. After the backup it remains at a high load average (> 10, previous system had about 2-4), with nearly 100% of CPU usage for the db kernel process.
Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but periodically rises up to a load average of 6 and slow down the performance of various applications (somebody says about 10 times slower). Here we also noticed a high usage (now 200-300%) of the db kernel process.
Our questions are:
1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
2. Are there any other (new) parameters, which can help? Maybe reducing MAXCPU from 4 to 3 for reserving capacities for the system (there is only one maxdb instance running)?
3. Is the a possibility to switch back to 7.6.00.37 (only for worst case)?
I have made some first steps with x_cons, but don't see any anomalies on the first look.
Regards,
Thomas

Thomas Schulz wrote:>
> > > Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but
> >
> > What is it about this parameter that lets you think it may be the cause for your problems?
> After changing it back to NO, the system runs better (lower load average) than with YES (but much slower than with old version!)
Hmm... that is really odd. When using USE_OPEN_DIRECT there is actually less work to do for he operating system.
> > > Our questions are
> > >
> > > 1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
> >
> > Yes - of course. Changes are what Patches are all about!
>
> Are there any known problems with updating from 7.6.00.37 to 7.6.03.15?
Well of course there are bugs that have been found inbetween the release of both versions, but I am not aware of something like the performance killer.
We will have to check this in detail here.
> > > I have made some first steps with x_cons, but don't see any anomalies on the first look.
> >
> > Ok, looking into what the system does when it uses CPU is a first good step.
> > But what would be "anomalies" to you?
>
> Good question! I don't really know.
Well - then I guess 'looking at the system' won't bring you far...
> > Do you use DBAnalyzer? If not -> activate it!
> > Does it gives you any warnings?
> > What about TIME_MEASUREMENT? Is it activated on the system? If not -> activate it!
>
> OK, that will be our next steps.
Great - let's see the warnings you get.
Let us also see the DB Parameters you set.
> > What parameters have changed due to the patch installations (check the parameter history file)?
> >
> > What queries take longer now? What is the execution plan of them?
>
> It seems to happen for all selects on tables with a lot of rows (>10.000, partially without indexes because automatically generated). With the old version we had no problems with missing indexes or the general performance. Unfortunatly it is very difficult to extract some sql statements out of the JBoss applications. But even simple queries (without any join) runs slower, when the load average rises over 4-5.
Hmm... the question here is still, if the execution plans are good enough to meet your expectations.
E.g. for tables that you access via the primary key it actually doesn't matter how many rows a table has (not for MaxDB at least).
> > BTW: how exactly do the tests look like that you've done on the testsystem?
> Usage over 6 weeks with our JDBC development environment (JBoss), backup and restore with various combinations of USE_OPEN_DIRECT and USE_OPEN_DIRECT_FOR_BACKUP.
Sounds like the I/O is your most suspect aspect for overall system performance...
> > Was the testsystem a 1:1 copy of the productive machine before the upgrade test?
> No - smaller hardware (32 bit), only 20% of data of the live system, few db users and applications.
>
> > How did you test the system performance with multiple parallel users?
> Only while permanent development with the 2-3 developers and some parallel tests of backup/restore. Unfortunately no tests with many users/applications.
Ok - so this is next to no testing at all when it comes to performance.
> An UPDATE STATISTICS over all db users seems to change nothing. At the moment the system remains markedly slow and we are searching for reasons and solutions. Another attempt will be the change of MAXCPU from 4 to 3.
Why do you want to do that? Have you observed any threads that don't get a CPU because all 4 cores are used by the MaxDB kernel?
regards,
Lars

Thinkpad G40 keyboard problems after updating from W98 to W7

Hi community users.
I'm new here with a, for me, typical problem.
I’m having a problem with my Laptop keyboard IBM ThinkPad G40, type: 23884SG, Windows 7.
Since I updated from Windows 98 to Windows 7 the keyboard definition is wrong. I’m not able to find the right configuration of it on base of the standard list of country and language definitions in W7.
Who can help me with this.
I already installed some drivers from the Lenova site but nothing seems to help.
So the problem is that I can’t find the right service from the country and language menu to the keyboard in W7.
All suggestions are very welcome.
Thanks in advance,
Dirk
Moderator Note; s/n & UUID edited for members own protection

Hi Vince,
Thanks for your response to my problem.
Problem isn't the choice of the specific language. The problem after the update is that I'm not able to choose the right combination of language and the type of keyboard selection in Windows 7. The selection list is long: from South-Africa to Sweden.
Although most of the characters on the keys on the lower part of the keyboard correspond with the ones on the screen but especially the keys on the upper part don't.
So I'm searching to a correct selection of the combination language and specific type of keyboard. Or there must be some driver witch can be download.
Looking forward to the feedback.
Kind regards,
Dirk

Problems after converting from 1.3SE to 1.4SE

Similar Messages

Maybe you are looking for