Problems after flashing ms-8873 bios

I got an MS-8873 Nvdia GForce 4 MX-440-SES and when i was updating the bios of the AGP Card, my machine freezed in the midle of the process. i gave it 20 minutes before assuming it was freezed and turn it down. Now when i try to boot with this card there is just a series of beeps and no video at all. If i change in the computer BIOS the primary display adapter to onboard vga instead of agp add-on and plug the monitor video conector in the onboard video conector i can boot with the card into the slot but it seems the systems does not asign it resources because when i try to run the vga flash bios update utility it just says there is any nvidia card into the computer. What can I do? I got the next hardware:
P4 2.4GHZ 533MHZ FSB
MB ASRock G Pro
DDR 2100 384MB
Leadtek WinFastTV 2000XP Deluxe TV/FM Tuner
LG Combo CD-RW/DVD

xexyrbt,
Check to see if you card has a jumper on it so you can go to the second BIOS.
Word of advice, a Vid Card is not a motherboard. They do not need to have their BIOS' updated, they usually get it right in the first BIOS.
Take Care,
Richard

Similar Messages

  • Black Screen after flashing the latest BIOS

    Nothing but Black screen (fan, leds work) after flashing the latest bios...
    Is there anything I can do, or just new bios/motherboard can help? (I tried resting the battery, F8 key..) Thanks in advance

    I presume BIOS is screwed up. What you need is professional help with this so contact nearest service provider and ask for help.
    By the way: check this forum using advanced search option. In the past I saw several interesting threads about BIOS recovering. Im pretty sceptic about it but maybe you will be lucky and find solution.

  • Problems after flashing msi845pe bios version 3.8

    hi
    i am difficulty after flashing the version 3.8 of the latest bios for msi
    845pe max
    i was not able to detect my Creative 5.1 sound card , a pci card
    pls help

    Problems here with verson 3.8 also.
    Flashed to version 3.8 and lost both sound and modem (both PCI cards).
    Sound card is Creative SoundBlaster 5.1.  On-board sound already disabled.
    Flashed back to version 3.7 and everything works again.

  • K7N2 Delta problem after flashing from 5.0 to 5.3

    I was using my K7N2 Delta nicely but after flashing the BIOS from 5.0 to 5.3 in LiveUpdate3 (all OK) and then when LiveUpdate ask to reboot... GOOD BYE!
    When bootin the D-lights show that I have a processor damaged or not intalled properly (two red light up, and two green down...).
    My processor is an Old Tbird 1.2 Ghz with 100FSB.
    The question is: Why the mother stops recognicing the processor if before flashing BIOS worked nicely?.
    J10 and J11 jumpers:
    When I opened case to check out, I had the green J10 and J11 jumpers closed in the mother. The J10 was in safe mode, and the J11 jumper was closed...(133FSB-166FSB??).
    I only have another athlon 1.1 ghz FSB100 processor to test the mobo, but I don´t want to take the risk of burn that one two (if is that the problem, of course).
    So... I want to know how can I reflash the bios back (I have the old BIOS in a backup floppy disk, of course)... or if anyone else have the same problem as me....
    Thanx a lot guys, and please help me... I´m very sad by now... because I don´t know how to get my computer to work.
    Jose.
    (from Argentina)

    Garry,
    Just add
    group.Administrators=system
    in your filerealm.properties file to login into console.
    Hope it helps,
    -satya
    garry payten wrote:
    I am migrating from 5.1 to 7.0 on Solaris. I was able to run the conversion of the weblogic.properties file to config.xml, I was also able to start the new admin server, but I was not able to log in to the console. I get the following error:
    Authentication Denied
    The username or password has been refused by WebLogic Server. Please try again.
    I verified that the WL_USER and WL_PW were correctly set in the startscript and that the system password was set in the config.xml. Any hints? Thanks

  • Problem after Neo2 LiveUpdate to BIOS 1.B - need help

    Hi there.
    after updating my Neo2 Platinum mobo to BIOS 1.B with LiveUpdate I got a problem which I cannot resolve.
    Here are the symptoms:   
    1. Updated BIOS to 1.B with Live update. In the end got the meesage that BIOS was updated successfuly.
    2. In case of 'cold' start I can enter into BIOS menu.
    3. If I restart PC and hit <DEL>, I am getting only grey cursor blinking in the top left corner of monitor. After switching power off and having 'cold' start entering to  BIOS menu with no problem.
    4. If I exit from BIOS menu and on the PC restart immediately hit <DEL> - I can reach BIOS menu again. If I let Windows start and then do restart - BIOS menu is not available for me (with blinking cursor) -> Power OFF required to enter BIOS again.
    5. I tried to rollback BIOS to version 1.9 I used previously and got an issue here regadless if I used options from the top or simply supply bios file anme in command line
    C:>AWFL859G.EXE W7025NMS.1B0
    C:>AWFL833D.EXE w7025nms.190
    My PC just hung and keyboard was locked out.
    The only one difference I saw - in case of AWFL833D.EXE I got continuous beep sound with message "Please wait!!!". With AWFL859G.EXE PC hung and program displayed the message "Enter file name".
    The reason of BIOS update was because of the PC stability. Pretty frequent it hung with red line on the top of screen....
    6. No difference after CMOS clearing.
    Any suggestions of how to recover from this situation are very welcome.
    Thank you.

    Try using a ps2 keyboard to enter brios.  Also use ps2 keyboard when you reflash.  It is possible that flashing a messed up bios (caused by liveupdate) requires yet an other correct flash to solve the problem.  Use floppy method with the command line switches described in the thread below to reset cmos etc. AND FOLLOWING SYAR'S INSTRUCTIONS about rebooting etc.
    https://forum-en.msi.com/index.php?topic=86257.msg642933#msg642933
    Quote:
    "DOS floppy flash shall be performed with :
    awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
    (Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
    After flash is complete :
    TURN OFF PSU (don't restart) wait 15 seconds
    Turn on again , press the power button .
    Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
    Boot the system again with the floppy in the drive to let the DMI pool build and update itself"
    Post back and let us know if it works this time.  Good luck.   
    EDIT- If the above does not work, consider modded bios as described here:
    https://forum-en.msi.com/index.php?topic=88137.0

  • Sound Problems after Flash 11.3 Update

    This reply is to the post by Ortho_Fan, number 28, which references a Firefox forum and "Firefox Hates New Update." This thread is specifically about problems that Flash 11.3 is causing with Firefox but the problem isn't with Firefox, it is with Flash Player 11.3. 
    I have no sound with Firefox, Chrome or Safari.  I do have sound with IE9 but some people do not.
    See these and probably other threads:
    No sound in flash
    http://forums.adobe.com/message/4483563?tstart=0
    Problem with sound after update
    http://forums.adobe.com/message/4483038

    I've branched this discussion into it's own thread, because the issue you're describing is different than the issue from the previous thread, which was related to a specific crash instance.  We'd like to keep the threads focused on particular issues to help both investigate and collate the information coming in, and to aid in discovery for people that are experiencing similar issues.  A single thread with a dozen issues is far less useful in either regard.
    For the sound issue you're experiencing, I would recommend that you follow the advice in the threads you've referenced above.
    Flash Player 11.3 included new sound enhancments to facilitate support for low-latency audio, to facilitate more repsonsive sound in complex Flash games.  While we try to test a wide array of hardware, and conduct months of beta testing, it's impossible to hit every device, OS, browser and driver combination.
    Please ensure that you have the lastet drivers installed for your sound card/chipset.  If the problem persists, please post details of your configuration to that forum thread so that we can track down that hardware/driver combo and investigate the problem. 
    As a workaround, you may wish to roll back to Flash Player 10.3, until a new version is available.  Flash Player 10.3 contains up-to-date security patches (we maintain one major version back for Enterprise), and will revert the sound change that is causing problems for you.
    http://www.adobe.com/support/flashplayer/downloads.html
    Thanks!

  • [msi k8t neo]problem after flashing to 2.20

    hello
    i have a MS-6702 (K8T Neo-FIS2R) motherboard and after flashing my bios it shows my ddr400 ram as ddr 333
    here is my system config:
    athlon 64 2800+
    2x256 ddr 400
    1x80gb and 1x120gb sata seagate hdd
    ati radeon 9600xt
    win xp sp1
    also please could you tell me if i could use the ddr 533 sticks with my config....
    thank you

    thanks...
    but i think its because the ddrs were made by  2 diff manuf. and the new bios reports the cas lwrong for both both are actually 2.5 but it shows 2.5 for one and 3 for the other....dont know why thuis happened...and cpu-z shows one clocked at 166.7 and the other at 200......
    also the ddr 533s would not be able to give their full potential in my config?...
    as i am planning to get new ddrs as i have to give these to my bro...

  • N95 - Problem after flashing F/W No 12.0.013

    Hello,
    After flashing F/W 12 to my N95 / (RM-159 07.01) through Nokia Software Updater, I found that the phone was loaded with a different set of available languages. As a result, Greek language was no more available.
    Before the update, the phone was operating with 'Automatic' menu language (resulting to Greek) and English writing language. It's an unbranded model.
    Note: A month ago, I had upgraded another (unbranded) N95 with no problem (Greek language was existing also after the ugrade). However it had different settings: Menu in English and Writing in English.
    Can anybody help to recover the lost set of languages in the last N95?
    Thank you

    Very strange.
    I would suggest that you contact your network and tell them that your sim isn't working properly but don't tell them what caused it (so they can't blame it on you).
    They should replace your sim free of charge as it's not your fault.

  • Problem after Flashing BIOS on my B490

    I have Lenovo IdeaPad b490 I boughted yesterday.
    I just find the latest BIOS update for my Notebook.
    I have downloaded the latest BIOS update from This Page, but it just downgrade My BIOS version to an earlier version. Before I try to update, the version is 2013. But after update, It show the UEFI version of 2012.
    Can I revert The BIOS to the version of 2013?
    It also encounter the problem with my Switchable Graphics. The Device Manager told that Geforce GT 720M as my Graphics while I know that my Graphics is Geforce 705M. I also can't use my Nvidia GPU.
    Can anyone give me the latest BIOS? Thx..

    Quote from: Blazer on 22-July-05, 22:39:17
    thats what it sounds like ! contact msi and get a RMA # to return the board,as they can reflash the bios.  good luck
    How do I do that? It looks like MSIs site is clinically clean of any way to actually contact them...

  • MOVED: K8NGM2-L onboard video problem after flashing BIOS

    This topic has been moved to Linux/Unix.
    https://forum-en.msi.com/index.php?topic=111410.0

    http://www.msi.com.tw/program/search/ser/SerConRes.php?Page=2&num=0&DATA=2&SearchKey=6156
    there are 3x 6156 models to start
    a BX VA and a ZX
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=112
    is the only one with a product page and piccy
    did you save the old bios wen asked
    have you Clear CMOS Guide
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=112
    is all that remains of the 6905 ,not evan a bios file
    so its not going to be an easy thing to find out
    d/l the manuals and compare chip sets etc is all i can suggest

  • MOVED: Problem after flashing BIOS

    This topic has been moved to BIOS.
    https://forum-en.msi.com/index.php?topic=104640.0

    Quote from: Blazer on 22-July-05, 22:39:17
    thats what it sounds like ! contact msi and get a RMA # to return the board,as they can reflash the bios.  good luck
    How do I do that? It looks like MSIs site is clinically clean of any way to actually contact them...

  • Core center problem after flashing

    i have
    (2)operating system in my computer (win-98se)
    and (win-2k).
    newly I have flashing my BIOS with latest version of
    liveupdate and now evrytings are running
    good.
    but whenever corecenter running in my computer in (win-98se)
    I see a blue screen with this content:
    ( A FATAL EXCEPTION 0D HAS ACCURRED AT 0028:E9742715 IN VXD RUSHTOP (01)
    +00000245.THE CURRENT APPLICATION WILL BE TERMINATED )
    and when runing in (win2k) that have result in restarting the system .  
    but i dont have this problem with previous BIOS version .  
    withal :
    i have this problem with previous version of core center and latest version
    of that after flashig !  
    can anybody help me ?
    [email protected]

    What Version of Core-Center are you running?...Sean REILLY875

  • Firefox and Adobe problems after Flash update last night

    OK, this is a non-Apple question, but I haven't found any solution yet.
    Everyone knows that to run the "Adobe Acrobat NPAPI Plug-in, Version 10.1.3" in Firefox, you had to open in 32-bit mode. I did and that plug-in, plus the "Adobe Acrobat Create PDF 1.2" extension worked just fine running Firefox 12. Tonight I got notification that I needed to update Adobe Flash Player. I did (quitting and restarting Firefox after the installation).
    THEN up popped a warning - Firefox suggesting that I disable the NPAPI plug-in and finding out here that Firefox was disabling the plug-in. So I disabled it, restarted, etc. Then I found that the Create PDF plug-in would crash if I tried to save a web page as PDF within Firefox.
    Is there any way to go BACK to the older Flash plug-in? That seems to be at the root of my problem. I can use PDF Browser plug-in in Firefox to display PDF files but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
    Any help out there?
    Thanks,
    Clinton

    clintonfrombirmingham wrote:
    petermac87 wrote:
    clintonfrombirmingham wrote:
    but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
    Create PDF or save as PDF?
    Pete
    Pete,
    I can always use the PDF creator "Save as Adobe PDF" that is available from the Print menu and added by Acrobat Pro X, but it does not always save the hyperlinks correctly, etc., where the Adobe Create PDF does a fantastic job... I'd just like to have it back. It does not show up in the Safari extensions/add-ons for some reason.
    Thanks for getting back so quickly!
    Clinton
    Then you may well have to go to the Mozilla Forums on this one. As I say, I steer clear of Firefox because of all it's bulky extentions.
    Good Luck
    Pete

  • IPod problems after Flashing with 1.1.1

    I downloaded and flashed my iPod with the 1.1.1 updater and went as far as to completey wipe the iPod and reload everything. I did this and the iPod has been working fine. Well I got some new songs the other day and went to plug the iPod into the USB port. The computer proceded to ding several times as if I had plugged in then uplugged the device several times. While this was happening the iPod would go from "Do Not Dissconect" to the main menu and back, until finally it stops at "Do Not Disconnect". The computer never recognizes the iPod and finally I have to disonnect the iPod, I know that's bad.
    After that the iPod will either be stuck in "Do Not Disconnect" until it dies or will "seem" fine for a while but freeze doing something until it dies. I also noticed in one instance it seemed fine, but I noticed that the Play/Stop/Pause icon in the top left of the screen was not there. It finally froze playing a video and I had to wait until it died.
    Incidentaly, if I do wait untill it dies, it really does reset and works fine, I can even charge it with the car charger. Also, this happens no matter which of my 4 computers I try to use.
    I would just re-flash it with the origional firmware, but I won't be able to do that untill I can get a computer to recognize the iPod.

    Try backdating to iPod Updater 2006-01-10 (1.1 for Nano) and restoring with that updater. If you're having problems getting the iPod to be recognized by the updater, put it into disk mode first.
    http://www.apple.com/support/downloads/ipodupdater20060110.html
    http://docs.info.apple.com/article.html?artnum=93651
    The next iPod Updater should be coming out soon, which will fix all of the problems everyone seems to be having with their nano's and 1.1.1.
    CG

  • Problems after Flash Player update

    Hi,
    i am writing because i have some strange sensations in my
    application after i updated my flash player to version 9,0,115,0.
    this is the problem:
    i have a dynamic textfield with htmlt text, in this html text
    i have some img-tags which i use to add Sprites into the htmltext
    that have some kind of user interactivity (rollover, click...).
    until now everything worked fine, just with the update i have
    the problem that i lost the interactivity to this objects.
    just some sprites which have embedded assets from a swf have
    the interactivity (rollover, click...) but also jsut on the
    embedded symbols and not on the whole sprite.
    example: if i put the event on the sprite:
    this.addEventListener(MouseEvent.CLICK, doSomething)
    the event will be just dispatched if i click on the embedded
    symbols.
    i tried Security.allowDomain('*') but this didnt solved my
    problem
    its like i am getting no focus on the sprite.
    like i said before... it was working before the update :-(
    greetings and thankful for every help!
    Pixelista77

    Hi Alex, It could be that with the Upgrade to SP2(a major upgrade) it upset Flash Player:-) I've had various glitches when making system changes as well. Then with the 10.1 version of Flash Player being released at the same time, you may have just got caught in the cross fire:-)
    It sounds like you did everything correctly, but I just want to touch base on the ActiveX Control not being registered.
    When this message is received it can mean the Administrator Account was not used, giving the permissions needed for that. It could also mean that your Anti-Virus/Firewall could have blocked it. Some A/V's even when disabled prior to Uninstalling/Installing, will re-enable upon the first Reboot after the Uninstall.
    Let me know on these.
    Thanks,
    eidnolb

Maybe you are looking for