Problems after installing new version o iphone 3gs
I installed this evening the new version of my iphone 3gs and since then I cannot use my iphone nor reinitialise it beause it asks me to connect to itunes.When i connect it to the computer it say there is no pilot and doesnt manage to install a new pilot I telecharged the last version of itunes and reinstallated it, try again to reinstall the pilot but impossible to connect and I can't use my iphone
Help me please
A warm welcome Sabina!
i wonder if the issue is the new battery (can that cause a slow down
and malfunction of this sort).
Not too likely at all.
or if my HD is the problem.
Very likely, I would expect all Laptop HDs 4 or more years old to be failing by now.
i just read somewhere that whenever we do the updates we're supposed to do the permissions and i never knew to do that -- so i haven't ever done it. could that be the problem.
That and Verifying or Repairing the HD are sort of like looking both ways before you cross the street, neither may be necessary to cross the street, but it certainly can prevent problems during the crossing!
should i do a clean install of the system software and start from scratch.
I really think the Internal HD is on it's way out, but if you have a good/complete backup, actually a bootable clone on an external Firewire Drive is preferable... Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html
thoughts would be appreciated. i don't have the money to take it anywhere to be fixed or to buy new -- so any help is greatly appreciated.
Without Money to replace the HD, you may be stuck booting off an external HD
Similar Messages
-
HT4623 my phone main button not working after installed new version software 7.0.6
my phone main button not working after installed new version software 7.0.6
Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you... -
TS2755 Problem with receiving other's text messages after installing new version.
I just installed the new version for my iPhone. Subsequent to this, I started to receive a copy of my husband's text messages. He did not receive a copy of mine. We have the same iTunes account, however separate phone accounts. I turned off and back on the phone . . . no change. Has anyone run across this problem?
That's because you both are using the same Apple ID.
The only place to share Apple ID is
Settings > iTunes & App Store > Apple ID: > shared Apple ID here.
All other Apple services like iMessage, FaceTime, iCloud, etc... you both should have unique Apple ID.
Check especially, Settings > Messages > Send & Receive > only your phone number is selected. -
I just installed the new version of firefox. My firefox worked fine with the previous version. But the new version only works on the day I install it but the next time i start my computer it does not work. It does not open after clicking the icon. I even uninstalled it and then reinstalled it but again the same thing happened. I have no idea about plug ins etc. but I did not install any new ones.
This is a very interesting issue. Let's start with trying [[safe mode]], [[managing profiles|new profile]], and [http://firefox.com/all-older.html installing an older version] - if one of these works, please don't do the rest and reply here.
-
Permissions problems after installing new hard drive
I backed up my old hard drive with SuperDuper!, then installed a new hard drive. When I tried to install my backup on the new hard drive with Disk Utility, it would work fine and then hang. It wouldn't finish, even overnight. So I installed a clean copy of leopard on the new hard drive, and then used Migration Assistant to move everything over from my backup. Worked great, until I actually tried to use the computer. Tons of permissions issues, mail and address book wouldn't run, Skype won't run even after installing an upgraded version, etc. What's weird, is my main account is an administrator account, but logging on as root and trying to remove admin permissions from my main account, the checkbox is greyed out! I also don't have a UID 501 on the system. I'm 502, and my wife's account is 503. I can't fix permissions from the finder, and in certain cases can't get them changed in terminal logged in as root. I don't know how to get my data from my old hard drive (which is running 10.5.1) to my new hard drive (also 10.5.1) Please help me! Thanks.
Hey Shawn,
Have you looked at the permissions with "Get Info"? Are they listed as belonging to "unkown user"?
First of all, see the Apple doc <href="http://docs.info.apple.com/article.html?artnum=306876">Administator user changed to standard.
After you clear that up, you'll probably have to remove the "unkown user" and add your user as the owner of all your folders. During that process, finder will probably crash. At that point, try running <a href="http://discussions.apple.com/thread.jspa?messageID=5670342#5670342>this terminal command described in "mlaster's" second posting.
Good luck!
CMF -
Problem after installing new software on torch 9800
Hi,
after installing the new software version 6.0 Bundle 3159 my blackberry tells me that:
uncaughtexceptation:
Application
net_rim_bb_nabsync_114(261) is not responding;
process terminated
but also there is an e-mail that doesn't work when I wan´t to open it fist of all it doesn't open then suddenly the screen turns white and it tells me something and below it there is a button to reset. If I click on the button the phone restartsFriend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I -
System break down after installing new version
Today I connected my ipod touch (3rd g) to my computer. iTunes told me, that there is a new version (ios 5) and i want to install it. During the installation my computer suddenly did not recognize the ipod an it could not be installed. Now on my ipod i see an icon, that i should connect my ipod with itunes. When I do this, Itunes tells me, that my Ipod has to be restored. I try to do this and it alle happens again, my computer do not see the Ipod. What can i do?
And sorry for my EnglishConnect it again to your computer and make sure that the security software does not block access to Apple servers during the update. iTunes for Windows: Troubleshooting security software issues
Also have a look at this article: iOS 5: Updating your device to iOS 5 -
Service error after install newer version of itunes
I just installed the newer version of itunes. now when I plug in my ipod it says service error...what the ****?
You won't. Back them up anyway.
(99241) -
Can I delete older app. versions after installing newer versions?
I recently downloaded and installed the newer versions of pages, numbers, and keynote. Can I safely delete the older versions I had when I purchased iwork 09? I'm trying to remove unneeded files. Thanks!
Hello Steve
Yes you can, just drag the unwanted apps to the trash and empty it.
OS X Mavericks: Install, update, and uninstall apps
http://support.apple.com/kb/PH14299
Regards,
-Norm G. -
HT4999 I NEED TO MAKE AN UPDATE FOR THE NEW VERSION OF IPHONE 3GS CAN YOU HELP ME PLEASE
PLEASE I NEED YOU HELP TO UPDATE MY IPHONE 3GS WITH THE LAST VERSION
iPhone 3GS can be upgraded to iOS 5. To do so, first update iTunes on your omputer to the latest version (10.5.x) then connect your device to the computer. iTunes should prompt you to upgrade on the Summary page.
-
Exchange 2007 - Outlook Anywhere problems after installing new SSL cert
*** Original thread posted on wrong forum ***
Hi all,
Exchange 2007 environment (2x CAS, ISA2006). Not much familiar with Exchange.
Problem: 20-odd machines off the domain use Outlook Anywhere (XP with Outlook 2010). AUthentication pop-up and not able to connect.
Company has recently changed its name and we have to renewed the SSL cert. Previous SSL cert. was issued to: webmail.oldcompname.co.uk (several SANs on that cert., including internal server names).
Applied for a new UCC SSL cert issued to: newcompanyname.com (also includes webmail.newcompanyname.com ; autodiscover.newcompanyname.com + old SANs).
The setting on those machines point the proxy to the following:
Https://webmail.oldcompname.co.uk (which is fine since it is in the cert and can be accessed)
Only connect to proxy servers that have this principal name in their cert.:
msstd:webmail.oldcompname.co.uk (I believe this is the problem since the new UCC SSL cert. was issued to newcompanyname.com).
Browsing technet + internet it seems that I need to look into OutlookProvider EXPR.
When I run Get-OutlookProvider everything is blank (I believe I should be concerned to EXPR only for Outlook Anywhere).
I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com
My only concern is whether this might break something else in the Exchange environment, especially as we have 100+ users on smartphones connecting via SSL on webmail.oldcompname.co.uk
Is it save to run this command? Do I need to re-start IIS? Do I need to look into any settings on ISA2006?
Comments/help are much appreciated.
RegardsHi,
According to the description, I found that we re-new a SSL certificate.
"I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com"
Just do it. Then remove the old certificate on ISA server and install a new one.
Found a similar thread for your reference:
Renewal of SSL certificate in exchange 2007 with ISA 2006
http://social.technet.microsoft.com/Forums/exchange/en-US/25770038-8491-470a-92fa-8ae50674b7a6/renewal-of-ssl-certificate-in-exchange-2007-with-isa-2006
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Startup problems after instaling new graphics card drivers
PC: HP p6520 f with a 400 watt power supply
video card: AMD Radeon 6570 (MD1GD3)
After getting the 400 watt power supply, I was able to uninstall the intergrated graphics card's drivers, but I can't succsesfully startup after installing drivers for the new card without a system restore, which of course gets rid of the new drivers.
I've tried newer drivers, but those don't work either.
Any suggestions?Hello Sev_07. I understand you're unable to install your video card drivers.
Are you receiving an error on boot?
Are you experiencing any issues with other pieces of hardware?
Have you tried running HP Support Assistant and Windows Update to ensure all of the software and drivers are completely up to date?
It may also be helpful for you to provide your product number so I can look at your computer's specifications. This document can show you where this is located.
I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
SDM resetting JCO destination after installing new version.
Every time I reinstall a new version of netweaver developer, I have to edit each JCO destination in order to reset the password. Is there a way to reset password for more than one JCO destination ?
Thanks, regards, peterI connect to two r/3 servers, but I have about 20 JCO destinations. I have to reset the r/3password for every connections by editing the JCO connection as explained in the document WEB DYNPRO :about configuration and Administration by Timo Lakner , Jochen Guertler dated 2004-01-20 paragraph 3.6 Maintain JCO destinations defined by development component sub paragraph 3.6.3 Edit existing JCO connection.
Thanks regards, peter -
Unique problem with installing new version of adobe flash player
Hi there. I am unable to install the newest version of adobe flash player. I am not getting any error messages like most people's issue on this forum. What happens is I run the installer, and it attempts to install for a second and then the installer screen goes blank , as you can see in the image. nothing happens after this. I have tried uninstalling and reinstalling. Any tips on why this is happening?
Hi Casey,
When did you download this file? It is for a problematic installer that we removed from our servers last week (Wednesday 25-March). If it's still being downloaded it's either cached on our servers and we need to clear the cache again, or it may be cached by your browser, in which case, clearing the browser cache will download a new, non-problematic installer.
Thank you in advance.
Maria -
Another volume control problem after installing new software
I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I
Maybe you are looking for
-
NF-e 3.10 - Erro 204 - Duplicidade - Botão consulta status
Boa tarde a todos. Estamos em fase de testes do projeto de implementação do XML 3.10. Eu tive algumas notas no meu ambiente de teste integrado com rejeição 204 (duplicidade de nota). Eu preciso realizar a consulta de status para essas notas, porém no
-
Problem Starting ORBacus ORB from Weblogic on HP-UX 11
I'm trying to use Weblogic startup classes to startup an ORBacus ORB. During the Weblogic startup process I receive the following error: Fri Jul 07 15:24:49 GMT+00:00 2000:<E> <WebLogicServer> Failed to invoke startup class timeserver=utils.Server ja
-
Itunes and Quicktime won't open.
I recently had a problem with Itunes, which deleted anything new I purchased or downloaded. I found out that if I rebuilt the library the problem could be solved, but I didn't want to risk losing any data so I didn't do it. I figured I'd wait for an
-
How to autofit JEditorPane in a jpanel?
Hi everybody, I have added a JEditorPane to a JPanel wrapped by a splitpane, as displayed in [this snapshot|http://img40.imageshack.us/img40/7540/jeditorpaneissue.png]. The splitpanel works fine, but for some reason the JEditorPane has a fixed size a
-
Purchase orders from order recommendation report
hai, Can purchase orders from the order recommendation report be saved as draft,because the purchase orders needs to be maually approved before being creadted. Thanks in Advance Regards Vikash