Problems after installing SLT SP05 - service iuuc_repl_mon_schema_oif

Hello,
just to share the issue... I just applied SP05 to our SLT system and I am getting following error when clicking on details of replicated system:
The following error text was processed in system IDE:
ICF service node "/sap/bc/webdynpro/sap/iuuc_repl_mon_schema_oif" does not exist (see SAP Note 1109215)
Requested service does not exist.
Also all SAP notes fixing SLT that were applied on top of SP04 are in inconsistent status. Re-implementation is not possible because some code was modified by SP05 and I consider de-implementation risky because I can unintentionally remove code delivered as part of SP05.
To eliminate hypothesis that root cause of this issue can be SAP notes - I installed SLT SP05 into fresh SAP IDES system and defined replication to newly installed HANA database - result is same.
I have suspicion that possible root cause might be the fact that I implemented both SP05 packages (T1 and T2) together in one queue but this one is not confirmed.
I do not expect solution (I opened SAP message for this) but I would like to share the experience (especially if you are planning upgrade SLT to SP05). Also I would like to ask if you already updated to SP05 and did not encounter this issue to share the procedure you used (this might help to see what was done differently and what might therefore be the root cause).
Thanks
Tomas

Hi Tomas,
I've had also this problem using transaction LTR or iuuc_replication_config. But solution is described in SAPnote 1109215.
You have to do following steps (on SLT system):
1. Go to transaction SE80
2. Change to: Web Dynpro Comp. / Intf.
3. I*
4. Choose IUUC_REPL_MON_SCHEMA_OIF
5. Check IUUC_REPL_MON_SCHEMA_OIF -> Web Dynpro Applications -> iuuc_repl_mon_schema_oif
6. Next "Goto -> HTTP Service Maintenance"
7. If the node does not exist, the system issues the query: "ICF node for service "..." does not exist. Do you want to create it?"
8. Choose "Yes"
If you do this steps you'll be able to access another windows in Configuration & Monitoring Dashboard.
Regards,
Pawel

Similar Messages

  • A lot of problems after installing Windows XP using Boot Camp on a Mac Book

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
    ~Twilight

    ---I'm moving this topic to the Boot Camp forums.
    -Twilight

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • Printing problems after installing the Epson Printer Driver 2.16

    Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

    Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

  • Problem after installing 10.4.8

    Hello,
    I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
    So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
    The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
    Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
    Thanks...

    How did you update? Mac OS X 10.4.8 Update (delta)?
    http://docs.info.apple.com/article.html?artnum=304200
    After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 
    2.0 MacBook • 100GB HD • 2GB RAM   Mac OS X (10.4.7)   60G Photo iPod • AppleCare

  • TypeLoadException after install SharePoint 2013 Service Pack 1

    After install SharePoint 2013 Service Pack 1 Russian I got the following error (approximate translation from Russian):
    TypeLoadException: Method 'Upgrade' does not implemented in 'WorkflowServiceApplicationProxy'
    Any ideas how to workaround it?

    Hi,
    Please post your ULS logs here.
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • DVD drive problem after installing 10.5.6

    I have MacBook Pro 15",
    Model Identifier-MacBookPro 2,2,
    Intel Core 2 Duo 2.16 Ghz
    Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
    But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
    Before I install this update, everyting was ok!
    Please Help!!
    P.S Sorry, for my english

    Hi Drug;
    Have you tried resetting PRAM by holding down control, option, P and R during reboot?
    Allan

  • Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found

    Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found?

    32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
    64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

  • Problem after installing IOS 8.0.2

    Hi there,
    I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
    Thanks for the sopport

    Hi there,
    I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
    Thanks for the sopport

  • Problems after installing Bootcamp 3.1

    Hello everyone.
    I had installed Windows 7 64 bit Ultimate in a Bootcamp partition. I used the SL disk to install Bootcamp 3.0 which, with some audio related problems which were solved by changing the drivers, worked well. All sounds played, the graphics card behaved normally, etc.
    Recently I got the alert of a Bootcamp update, 3.1, as we all know. After installing it without a hitch, small problems began to pop up.
    First, no Windows startup sound played anymore, and there has been no way for me to make it work again. I've gone to countless forums and gone through an endless barrage of suggestions, including a complete formatting, but it always leads back to the same, isolated problem: Startup sound plays in BT 3.0, doesn't play anymore in BT 3.1.
    But more importantly, after pretty much giving up with the startup sound issue (it's only that particular sound, in the login screen, so I decided to ignore it's absence), more problems appeared. Initially, all system tray icons appeared swiftly. Now the main ones, Sound, Wireless Connection and Battery appear fast, but the rest take at least 5 minutes to appear. This is again something that wasn't present in Bootcamp 3.0.
    Yet another problem, this one I consider is the most important, and the real reason for this post of mine, is that Bootcamp 3.1 brought a serious driver problem with my Macbook Pro's 9400M video card. Doing the most stupid of tasks such as opening the video card's control panel from the Desktop gives me the following error:
    "The NVIDIA Display Panel extension cannot be created.
    Possible reasons include:
    Version mismatch. Reinstalling the drivers may solve this problem."
    Now, the Device Manager shows no errors in hardware-driver smoothness in any aspect, yet it's clear that the driver that BT 3.1 installs for the video card was either faulty or old, or for another OS. I went to NVIDIA's site to manually get the driver, but it turns out that they offer no NVIDIA GeForce 9400M drivers for Windows 7 64 bit. So I wonder, how come it worked before? Because in Bootcamp 3.0 the Control Panel would open flawlessly.
    So this is serious. Gaming has also turned into a nightmare, since the problem with the video card negatively affects the smoothness of the gameplay. Apple, things weren't working 100% with BT 3.0, but BT 3.1 far from making things better just got everything worse.
    I ask everyone here if there is a known solution. Should I install the NVIDIA GeForce 9400M drivers for Windows 7 32 bit? Why doesn't the driver installed by BT 3.1 function as it should when it's supposed to be covering Windows 7 compatibility? Why are the barrage of audio errors present in BT 3.1 and not in BT 3.0? What happened with my startup sound?
    Apple, you're offering the possibility for your users to user Windows for compatibility and gaming. You market your Macs are fully compatible and flawless even running Windows. Don't come about saying this is not your problem, it is. It's your drivers, you develop them, you give them to us. If they don't work, you must do something about it. If not, then stop offering the Bootcamp service completely. If you're gonna do something, do it well.

    http://www.nvidia.com/object/notebookwinvista_win7_x64_195.62whql.html

  • Problems after installing Windows 7 Professional on Thinkpad T61

    I have an old T61 that had Windows Vista installed. I wanted to use Windows 7 but didn't want to wipe out what I already had (for various reasons). So I bought a new disk drive and did a clean install of Windows 7 Professional. The disk drive is a Western Digital Blue Notebook 1TB drive. After installing the drive in the machine, I followed these instructions to install Windows 7: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74108. I chose to partition the drive into a C: drive (500GB) and a D: drive (431GB). After the install completed, I downloaded all the available Microsoft fixes (this took some time to complete).
    For the Device Driver and Application install, I used the ThinkVantage System Update option. The site indicated that Microsoft .NET Framework 3.5 with Service Pack 1 or later was required. I downloaded and installed version 4. There were additional Microsoft fixes for version 4, which I downloaded and installed also. Then I downloaded and installed ThinkVantage System Update 5.03. I then executed System Update and selected all the available updates. They all installed, except for Windows 7 Update Module KB2615763 64bit. This update, after failing, gave the option to install manually but when I click on that option I receive a pop up saying: Installer encountered an error: 0xc8000247. The title of the pop up says Windows Update Standalone Installer.
    I then attempted to install various applications on the machine: FileZilla FTP Client, Google Chrome, Notepad++, PrimoPDF were all installed without problems. When I installed a Cisco VPN Client for 64 bit machines, however, I was knocked off the network. Clicking on the WiFi symbol in the task bar showed that I had only limited connectivity to the network. I tried to do a IPCONFIG /ALL  and neither the WiFi adapter nor the Ethernet LAN adapter showed up in the list. I uninstalled the VPN Client, from the Control Panel, and was immediately able to connect to the network. An IPCONFIG /ALL now showed all the network adapters. I installed/uninstalled the VPN Client several times just to make sure that it was causing the problem of no network connectivity.
    I fgured that there might be updated network adapter drivers available to resolve the problem so I attempted both System Update and Windows Update again. System Update showed nothing available, except Windows 7 Update Module KB2615763 64bit. Windows Update had a message saying "Check for updates for your computer" but when I clicked on "Check for updates" it popped up a message saying "Windows Update cannot check for updates because the service is not running. You may need to restart your machine." I checked and the Windows Update service is running. I stopped and restarted it but received the same message when I tried to check for updates again. I rebooted the machine and tried Windows Update again. Same pop up message.
    I tried the "Fix problems with Windows Update" option in the Control Panel but received a message saying - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting. The error details say:
    Package ID: WindowsUpdateDiagnostic
    Path: Unknown
    Error Code: 0x8E5E0247
    Source: Engine
    I tried some of the other troubleshooting options and they all give similar errors - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting.
    I then thought it might be a disk drive problem so I tried to do a CHKDSK /F but when the machine reboots the CHKDSK seems to start (there is a message that says it can be interrupted by pressing a key within 10 seconds) then, before the 10 seconds are up, it ends without checking the disk and the machine continues to boot up.
    Has anyone seen any of these problems before? Did I miss something? Could this be related to the disk drive? Or missing device drivers? Bios?
    Any help with this will be appreciated.
    Solved!
    Go to Solution.

    A laptop drive that size is almost certainly an AF drive.  You can check by looking up the model's specs on the vendor's site. You can also use the fsutil command to check the drive's physical sector size and verify that the size isn't getting reported correctly - which is what usually causes the update problem.
    http://support.microsoft.com/kb/982018
    Expand the "Issue 6 Fsutil.exe tool" entry in that link for more info.  The entire KB may also be helpful.
    If my guess is actually the problem you won't have to reinstall Windows 7.  Just update - or roll back  - the driver.  You might first try going to Device Manager, selecting the storage controller, and rolling back to an earlier driver.
    If that works, configure ThinkVantage System Update to not show the offending driver, or this will happen again.  If that doesn't do the job, go to Intel's site and find the latest Matrix Storage Manager or Rapid Storage Technology that is specified for your chipset and operating system.  Or just try the latest and if that doesn't work, try earlier ones.
    https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Software+Products&ProductL...
    Here's a local KB addressing this (presumed) issue:  http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Windows-Update-Fails-After-Installing-New-Hard-...
    To repeat, this is a bit of a guess.  It's pretty likely that your storage driver is the culprit.  Either you need one new enough to support the physical size reporting ioctl, or you've been bitten by TVSU "updating" to a buggy driver.  Either way the corrrect driver should fix things.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1

    Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
    I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
    Error in Configuration Wizard
    Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
    Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed.  Configuration must be performed in order for this product to operate properly.  To diagnose the problem, review the extended error information
    located at {0}, fix the problem, and run this configuration wizard again.
    Leaving function StringResourceManager.GetResourceString
    Configuration of SharePoint Products failed.  Configuration must be performed in order for this product to operate properly.  To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
    Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
    In event view I see this two errors:
    1) First error
    System
    Provider
    [ Name]
    SharePoint 2010 Products Configuration Wizard
    EventID
    104
    [ Qualifiers]
    0
    Level
    2
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2014-03-08T21:41:59.000000000Z
    EventRecordID
    135580
    Channel
    Application
    Computer
    ABC-SRV-WEB01.abc.local
    Security
    EventData
    Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
    System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
    name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
    Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
    Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
    at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    2) Second error
    System
    Provider
    [ Name]
    SharePoint 2010 Products Configuration Wizard
    EventID
    100
    [ Qualifiers]
    0
    Level
    2
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2014-03-08T21:41:59.000000000Z
    EventRecordID
    135581
    Channel
    Application
    Computer
    ABC-SRV-WEB01.abc.local
    Security
    EventData
    Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
    Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
    Please advise on next steps.
    How can I successfully install SP1?
    Thanks,
    Alex

    could you please share the upgrade log file, so that we understand the error?
    did you reboot your server after the installation of SP1?
    also try to clear the Config cache on the servers and then try again?
    you can run this command on the server its failing
    Get-SPProduct -local
    PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • BizTalk Administration Console problem after installing IBM iSeries Access

    Hi, 
    We have a Biztalk Server 2010 environment on Windows Server 2008 R2 with SQL server on separate machine. 
    After installing IBM iSeries Access we get errors in Biztalk Administration Console, especially the Host Instance and Adapter information cannot be loaded. 
    Except for the errors in Adminsitration Console, the Biztalk installation seems to be working fine, so the integration processes doesn't seem to be affected. 
    We get the following error:
    BizTalk Server cannot access SQL server.  This could be due to one of the following reasons:
    1. Access permissions have been denied to the current user.  Either log on as a user that has been granted permissions to SQL and try again, or grant the current user permission to access SQL Server.
    2. The SQL Server does not exist or an invalid database name has been specified.  Check the name entered for the SQL Server and database to make sure they are correct as provided during SQL Server installation.
    3. The SQL Server exists, but is not currently running.  Use the Windows Service Control Manager or SQL Enterprise Manager to start SQL Server, and try again.
    4. A SQL database file with the same name as the specified database already exists in the Microsoft SQL Server data folder.
    Internal error from OLEDB provider: "The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception." (WinMgmt)
    I tried to uninstall the IBM iSeries Access, but the problem remains. 
    This issue is related to this post
    http://social.technet.microsoft.com/Forums/en-US/6f371f45-813c-48d8-80e3-bd94e00bf5dd
    But this post seem to miss a solution. 
    Thanks fo your help with this!
    BR
    Samuel
    SamueL J

    Hi and thanks for your help!
    The machine.config did it :)
    According to this link there is a known issue with the IBM iSeries Access installation which removes the proper permissions from the machine.config and therefore Biztalk Administration Console stops working correctly.
    http://www-01.ibm.com/support/docview.wss?uid=nas284158c400658982b86257611003c6d21
    BR
    Samuel
    SamueL J

  • Monitor calibratio​n problems after installing windows 8.1

    I have a hp envy m6-1105tx and right after installing windows 8.1 my monitor changed completely.
    When i have a photo open in photoshop tones, colors luminosity, gamma etc are all wrong. Before i never had problems, when i looked at a photo in photoshop and i will see the photo on a different screen it would be basiclally identical but now the photo in photoshop is much different than the actual photo, and this doesn't apply only to photoshop but to everything. I already try to do the calibration through the control panel but it didn't improve the situation, is there a way to get the screen back to the way it was before?
    Thanks

    Wehodancer, welcome to the forum.
    I checked for an updated driver for the video, but there is none for Win 8.1.  Therefore, I suggest installing the original driver for the video to see if it helps.  It may be that it was corrupted during the update process.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for