Problems after ios update

Ever since updating to latest ios FaceTime won't unmute, Chase Banking app camera doesn't work for making deposits and my my.yahoo.page looks nothing like on my pc. Does anyone have any solutions?

Hello there AlyBroyles,
It sounds like FaceTime is experiencing connectivity issues on only 1 of your devices connected to the same network. I would use this troubleshooting article on just the iPhone that is experiencing the iPhone that is affected:
iOS: Troubleshooting Wi-Fi networks and connections
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

  • Problem after iOS 6 Update.

    I gotta problem after i updated my iPhone 4 to iOS 6. It's a factory unlocked iPhone, then when i change the sim to another network theres no service at all, changed to same network's sim ( the one i am using now, but this one's working fine ) but different number its still no service. But when i use the sim that i used to put in when i updated to iOS 6 its working. Really need someone's help. Its bothering me.
    BTW Before even updating i tried all the sims and all are working hella fine.

    Try a hard reset.....
    Press and hold the Wake / Sleep button and the Home button at the same time, keep them both pressed until the Apple Logo appears.

  • Can't connect to wifi after IOS update.  Do you know a solution?

    Loaded the new update and now it is sporatic connections with the wi fi.  I have unplugged the router and all that, still no luck.  It will work normally very briefly, but only briefly after I unplug the router, etc.
    Do any of you have a solution to fix this?
    Thank you!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Cannot join network after ios update

    After ios update i cannot join on my ipad network

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPhone 4s got problem after I update to 7.1.1. Battery drain so fast

    iPhone 4s got problem after I update to 7.1.1. Battery drain so fast

    The Ultimate Guide to Solving iOS Battery Drain
    <http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain>

  • Multiple Samsung Stratosphere problems after FF1 update

    There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update.  Some were replys to older posts and some only touched on a single issue.  I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
    For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
    Summary:  Verizon and Samsung have finally updated the Stratosphere almost 1 year after release.  This updated the phone from Android 2.3.5 to Android 2.3.6.  Going by filename, this is known as the FF1 update.   This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
    There were some noticable changes in this update:
    -Lock screen has changed.  The puzzle piece and glass lock options have been removed.  New options have been added, such as facial recognition unlock.
    -Call answering screen has changed, introducing the option to ignore call with a message.
    -Camera now has digital zoom ability.
    -Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
    -Phone icon has changed ever so slightly
    -Wifi icon now included up and down arrows to indicate data is being sent or recieved
    -Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
    -The visual voicemail app has been improved (I have personally not used this feature)
    -Callback number is now supported in text / picture messages
    -Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
    -Update to how the device deals with the end of scrolling.  It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll.  (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
    -(I am sure there are more.  please list any others you may have noticed)
    I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
    -The biggest problem is with wifi connectivity.  Upon an initial connection to wifi, everything works great.  After somewhere between 15minutes and 2 hours, problems start happening.  Its as if the wifi keeps hanging or reconnecting.  Download speeds (tested with the SpeedTest.com app) slow to about one third of normal.  Apps like Facebook that require a constant connection will just time out.
    -It appears the signal strength for 3g and 4g connections is lower.  There are places where I used to get a 4g connection, and now I only get 3g.  Some palces I fall back to just 2g digital.
    Another minor issue i found was with text messages.  When you reply to a message, it no longer automatically focuses the text in the input box.  You have to first click into the box to start typing.  Not a huge deal, but one more step to take over and over.  Minor annoyence.
    At my house, I struggle to get a 3g or 4g signal.  I depend on wifi for my data connection.  So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home.  Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
    -Complete factory reset on my phone.  (did not help)
    -Pull battery and SIM card out of phone for 15 minutes.  (did not help)
    -Went to a Verizon store.  The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update.  He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
    -I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP.  Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address.  Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this.  I have a NetGear N900 router, and I can not change teh DHCP lease time.  It appears, however, that my router is not sending out "forever" leases.  But just to make sure, I gave my phone a static IP.  (None of these steps made any difference).
    The only thing that temporarily fixes the problem is a reboot of the phone.  This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
    I have now had this update for over a week, and on 2 phones.  I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
    I am asking Verizon or Samsung to at least confirm this issue if possible.  Maybe there are newer revs of the Stratopshere hardware that don't have this problem.  Or there is something unique about my (and apparently others) situation.  But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
    I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
    I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
    Thank you for your time.

    Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
    I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
    UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
    One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
    Message was updated by David Rensberger

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • Blurr images after ios update

    Hi,
    is it true that after ios update some will experience blurred images for images previously existing in the iphone before the update? If so, what is the cause and resolution?
    thanks!

    by "using itunes to remove the photos" do you mean syncing an empty folder?
    No. With your phone connected, itunes running, just un-check all the photos/albums, currently on your phone, under the photos tab in itunes. Hit the apply/sync button. This will remove all the photos currently synced to your phone. Once complete, just sync them back.

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

  • Cannot activate iMessage after iOS update.

    Cannot activate iMessage after iOS update. "Activation unsuccessful" I cannot activate it.

    Have you updated your iOS to 5.1? Just confirming as it says "iPhone 4S, iOS 5.0.1" in your thread.
    Double check if you have credit in your mobile in order to activate iMessage.
    Turn iMessage off and on again, than turn off your phone (long press display off and on button) and slide to turn off. Turn your phone back on, enter your "Apple I.D" in the iMessage window and wait till it verifies everything.
    Tell us if it solves the issue.

  • EFI Problems after last update anyway to downgrade ??

    Hello
    EFI Problems after last update anyway to downgrade ??
    i have updated my MacBook 2010 EFI to MB71.0039.B0E which is 2.1 version
    after updating to this version the Boot time become much slower when i want to change boot partition
    and shutdown become very much slower and startup too
    i tried to install Mac OS X Lion again but it doesnt help
    can i downgrade to this version 2.0 ???
    or when Apple will release the new version ?
    or where can i send a feedback regarding this issues !!!!
    Thanks

    These are user to user forums. If anyone knows the answer, they will give it.
    You can always call Apple support which may charge a fee or you can patiently wait for an answer here, which is free.

  • Share and save problem after latest update

    hello,
    i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app  but problem is still  and app doesn't work properly   ) how  can i downgrade to the old version ? Could you fix this problem quickly ?

    i use app which called "aLogcat"
    --------- beginning of /dev/log/main
    I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
    D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    --------- beginning of /dev/log/system
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
    D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

  • How can I improve picture quality...now grainy after IOS update!

    How can I improve picture quality...now grainy after IOS update!

    Hello, dreamer5th. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I would recommend going through when experiencing this issue.  They are labeled for the iPhone; however, the steps also apply to your iPad.  Also, make sure to test the camera in well lighted conditions as this can affect picture quality. 
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    If the issue persists see the last section labeled Issue not resolved.
    Cheers,
    Jason H. 

  • Contact list deleted after ios update

    This is the craziest thing I ever imagined . My whole conytact list is gone after ios update ..

    This is not bug!
    Alas, in other Symbian smartphones I examined, the background in Contacts and background in theme are the same, and Nokia in firmware 110 for E71, E66 made the same causing inconvenience
    As for my opinion, previous always white background in Contacts looked better

  • Can't connect to wifi network after iOS update

    Can't connect to wifi network after iOS update.

    This does not work in my case.
    Situation: we have wifi at home using WPA encryption.
    The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
    Now things stopped working again. Resetting network settings did not help either.
    The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
    That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

Maybe you are looking for