Problems after Laptop Refresh

Hi there,
I recently had a problem with a virus and ended up doing a system refresh to fix the issue. In doing so many of my applications were uninstalled including creative cloud with my photography package membership. Since refreshing I have tried to re-download the creative cloud application but it no longer recognizes that I bought the package and only allowed my to download the trial versions of Photoshop CC and Light room. How do I get the full version back, and if I do not have the application downloaded will adobe continue to charge me for it?

Moving this discussion to the Creative Cloud Download & Install forum.
SyndeyK please see Creative cloud doens't start up correctly where this topic was just discussed.

Similar Messages

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

TMS, profiles after System Refresh

Hi All,
I have done a system refresh from PD1(old prod) to PRD(new prod) on new server.
I faced following problem after the refresh.
1. The instance profile of PD1 had many parameter.., after copying that in PRD, sap wont start. So I have commented many of those parameter from the instance profile of PRD?
2. After the refresh, since PRD doesnt have the transport request of PD1, how do I put those request to PRD?
I have the backup of \trans folder of PD1.
Regards
Prash

Hi,
Rename the file from \trans\buffer\HD1 to PRD worked!!!
-> the only concern if transport buffer is clean up in between then some request was missing in import queue of PRD.
zcsa/installed_languages = DE
this should be ED
zcsa/system_language = E is OK.
install/codepage/appl_server = 1100 -> this is for codepage installed on your application server
I get message like PXA_NO_SHARED_MEMORY occured
and SYSTEM_NO_ROLL occured..
-> are you using 32 bit OS ?
check Note 103747 - Performance: Parameter recommendations as of Release 4.0
Note 88416 - Zero administration memory management as of 4.0A/ Windows
also consider Note 129813 - Windows: Problems due to address space fragmentation
regards,
kaushal

Sound problem in Laptop Compaq Presario

Hi, please help me because the sound in my Compaq Presario3614 AU disappears suddenly from time to time .
I managed to bring it back few times by restarting the laptop but it doesn't always work. I've also reinstalled the drivers, so it worked again, but no more now after I've turned it off.
When I tried to open volume control, it said that there is no device installed, but in device manager all seems ok. I don't understand why all these troubles.
I used XP SP3,
AMD Turion x2
1Gb Ram
I bought this laptop almost 3 years ago. I need it for my job. Please help

v3614 sound gone
03-21-2010 01:35 AM
hi, my laptop just sent to hp service center to maintain few weeks ago.. coz of laptop cannot on...
now i'm facing another problem after laptop has been sent back to me that the audio sound was disappear automatically...
starting is just need to restart the laptop then sound will come back... but this time even getting few times restart... still didn't have sound..
at control panel audio sound.. it's just write that "no audio sound"..
device manager i have check there is no miss driver for audio sound.
i have try to install the software from the support driver... cannot install and ERROR..
Another things i found out that.. the laptop is using for conenxant audio sound.. when the laptop didnt have any sound.. the control panel and device manager din have conenxant audio sound device... seems like the software was disappear...
i have post the same problem.. but din have any reply...
our problem is same... now no more sound pop out again even after few times to restart the windows....

Laptop not coming up after PC refresh

Hi,
My Laptop was not connecting to N/W, so did the PC refresh. After PC refresh is started Blinking and never came up. I did hard reboot but no success. Please advise how to recover my laptop without losing my data. It would be of great help.
Please advise if any solution or How can i reach support team. I have registered my Product with HP but now my details are not there and it say my actual mail not found, However i do have registration confirmation mail with me.
Please help appreciate your help on this.
Thanks & Regards,
Prashant

Hi there @yspylp
Welcome to the HP Support Forums!
I understand that you are getting a flashing code error and that you are understandably concerned about your data.
I am happy to assist you.
Firstly I would recommend that you try to backup your data to an external device before doing anything else. This page shows a few methods you can try.
How to Recover Data from the Hard Drive of a Dead Laptop -wikiHow.com
Once your data is safely backed up, you can try calling in to technical phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
The other option would be to post some more details about what you are seeing on your computer, the flash codes you are getting can help identify the source of the problem.
Computer does not start and the LEDs blink or the computer beeps
Depending on the the error code you are getting, you may be able to address the problem yourself, but if it suggests a board problem then you will definitely need to call phone support.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

After SALV Refresh, rows are still selected in display

I have an SALV output (simple list) that updates a database table based upon user action. During the user_command processing, I modify the internal table for the SALV, removing the rows that have been updated by the user, and clearing my index row table created from the get selects methods (this appears to prevent this problem in older ALV versions). Then, I do a alv->refresh( ).
Upon re-entry to the SALV display, all the data is correct, but the rows that were previously selected by the user are highlighted. For example, if the user updated row 1, I do the processing and return to the SALV display after refresh. Row 1 (formerly row 2) is now highlighted.
If the user updated rows 1 and 3, upon return to the screen 1 and 3 are still selected (were 2 and 4 before the update).   . If the user updated the last row, the SALV display has no rows highlighted and cursor is on row 1, column 1, which would seem to be the correct behavior after the refresh.
SALV_DEMO* programs don't appear to handle this, and I don't find any method that will let me reset that prior user selection.
Any suggestions to correct the "memory" feature of the SALV display?

Hi ,
Try to free your container before clearing your alv grid.
try the below code.
CALL METHOD containername->free
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
      ENDIF.
      CLEAR containername.
      CALL METHOD grid name->free
        EXCEPTIONS
          cntl_error        = 1
          cntl_system_error = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
      ENDIF.
      CLEAR grid name.
Regards,
Chitra

WiFi problem after upgrading to Windows 8.1 Lenovo R400 ThinkPad

I have this problem after updating to 8 to 8.1
Right after updating to 8 to 8.1, all of a sudden my wifi stops working. I used my philips external wifi usb stick and now I'm able to get the internet going.
However if I disconnect my philips usb I no longer get the internet because the built in wifi that came with the R400 ThinkPad no longer works. I went through the device manager and under properties it tells me, 'Device not working properly' however it is up to date.
Im Running Windows 8.1 64bit Laptop Lenovo R400 ThinkPad

Hi Matti,
Thank you for replying back!
I suggest you to reinstall the Windows 8.1, as all the windows driver will not update, if you have upgraded the Windows 8 to Windows 8.1.
Please download Windows 8.1 separately and reinstall the OS, I hope this may resolve the issue.
Note: I am not suggesting for clean installation, only reinstalling the same OS.
Do not update the drivers from ThinkVantage system update utility. I suggest you to uninstall the current drivers and download the drivers manually for Windows 8.1 and install it.
Below is the link to enter the downloads page and download updates accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to retain value in LoV item in Tabular Form, after Page Refresh

Hi,
I have a tabular form, which contains 2 items(columns), of type "Select List - named LoV".
Now, 2nd item(column) in tabular form, that LoV should get populated based on user's selection value in first item LoV.
1. So how do I refer to the value, that user selected in first item's LoV? I will have to use this value as reference in LoV query of my 2nd item ( on this tabular form)
2. Everytime I select value in first item LoV, page gets refreshed, as my requirement is to calculate 2nd item's LoV based on selected value in first item. So after this page refresh, first item LoV loses its value that was selected before the page refresh happened. So how do i retain this value in first item LoV? I have an unconditional process, that on every submit(refresh) of page, I set all my items with their corresponding values. But problem is what do i mention there to refer to this first item ( of type LoV) of tabular form?
I looked in view source of my page, this item is referred as f03.
So i used "apex_application.g_f03", to set this item to its value, in my uncoditional submit process. But it did not work. I tried to refer this item as "f03" in this unconditional submit process. But still it did not help, the selected item loses its value after page refresh(submit).
Please help.
Thanks and Regards,
Ravi.

Hi Rave,
You will have to use Javascript and Ajax to change the values as ApEx submissions will lose your results unless they are saved into the database.
Remember, that as you are using a tabular form there will be lots of items called f01, fo2, fo3 etc on the page (one per row).
Regards
Michael
Edited by: MKii on Jun 4, 2009 10:13 AM

Massive power drain after Belle Refresh update on ...

Hello
From being a minor annoyance the massive power drain from my N8 after Belle Refresh update is now a big problem!
The battery does not even last a full day now
No apps running - power save on, but to no avail.
After advice from Nokia Support I've tried to reinstall Belle Refresh again from Nokia Suite, but it didn't make a difference.
What else can be done? Is it possible to uninstall Belle Refresh completely?
Some have suggested it is because of the weather widget. Any confirmation from Nokia on that issue?

I have Belle refresh for over a month now and I keep running the weather widget permanently on first screen. Overall the power consumption is the same as before on Anna (I skipped the first Belle incarnation).
The only particular thing here is that I flashed clean the full 111.40.1511 version for my phone language. All I can tell is that in the first days after flashing the power drain was significant, merely because of intense phone usage, part of various customizations or just by curiosity. Since then the power consumption has slowly came back to "normal" for my daily usage habits.
Currently running widgets: clock, profile, weather, next coming event, BBC feed, WiFi, 3G, data usage counter, Nokia Battery Monitor, locations near me. Also Nokia Sleeping Screen is active. I gave up in using email widgets because I only use IMAP manual fetch mode and in this mode they are completely useless.
Cristi

Keep page position after a refresh

Hello,
I need a solution for the following problem regarding a J2EE web application : after a page refresh (let's say an automatic page refresh), I want the user to see the page in the same position as it was before the refresh.
(Suppose the user is at the end of a pretty long page, and normally, after the refresh the response will give the page at its beginning.)
I suppose some client side scripting (javascript) will solve the problem, but any help would be appreciated.
Thanks,
George

Normally you can add bookmarks to the page to demarcate different sections of the page, like this:
<a name="sec103"></a> When the page refreshes it should go back to the last bookmark that the user passed by.

Major problems after ICS on my Bionic

So I've had the Bionic since it was released and have never had any major problems with it. It wasn't until a few days ago when I woke up to a notice of the ICS update finally being available, so of course I pressed on Install now. I ended up going to sleep again and waking up later to a frozen screen. I did a battery pull since it was just frozen on the unlock screen, and after it booted up I was having issues with everything. Half of my icons were gone, neither of my text messaging apps worked and would force close randomly. I kept getting random reboots while just staring at my phone, sometimes many times in a row.
I ended up taking it to a couple different Verizon stores, the people at the first one told me they haven't heard of this problem nor did they know ICS was even out for Bionic yet, the second store was like "all you can do is FDR". After being hesitant on doing that since I didn't want to lose anything, I finally did it. After the restore, it hung on the "preparing system" screen for at least 2 hours before I finally did a forced restart. After that it decided to continue with everything...things were going okay for a little while, until I started to reinstall my apps. Then I started getting random reboots again, force closes on programs, and horrible battery life. I decided to give it a couple days to maybe settle in, and well, I thought it was better, but last night I started getting random reboots again and force closes on a lot of apps.
This is getting extremely irritating as I cannot use my phone much in fear of it crashing or rebooting itself. In the time it took me to type this, it has restarted 2-3 times, which is why I'm glad I have a laptop instead of having to type this on my phone.
Is there anything I can do to fix this? Or should I request a replacement phone? I have not rooted nor installed anything that changes system settings, and these problems only started after the ICS update, so it is not anything I did to my phone.

I've got the same problem after the update 3 days ago. The homescreen keeps closing and reloading - that takes >10 seconds every time. This update made my phone unusable. I can't get to anything because the interface keeps rebooting. I tried restarting it, taking the battery out and factory reset. Nothing helped - it works fine for about 5 minutes and starts messing up again. I can't even answer a call on it because it just freezes when I use any interface features. OMG... Motorola never again!!!
I'm taking it to the store lets see what I can get out of them. Who is testing these updates? Monkeys? That's what causes people to switch to iphones.

IDs of DraftMessage-Reference changing after Message.Refresh

Hello,
we have a very weird behavior when accessing messages in the Mailbox
folder with 660048 incoming messages and 48 outgoing messages.
We retrieve a reference to a draft message by creating it with the
following code:
Mail5 draftmsg =
(GroupwareTypeLibrary.Mail5)fgwaccMailBoxMessages. Add(message.ClassName,
null, null);
This works without problems and we get a Message object with a given
MessageID A.
Then after calling Refresh on that reference:
draftmsg.Refresh();
the MessageID suddenly changes and the Subject is filled. We found out
that the reference suddlny points at a completely different message,
because when we call "Delete()" on the reference, an entirely different
Message, which isn't even a draft message, is moved to the trash.
Similar behavior shows after executing the following code:
FormattedText draftmsgSubject = draftmsg.Subject;
draftmsgSubject.PlainText = "some String";
The subject is changed correctly, but the MessageID changes wildly and
the reference points to a different message again.
Finally we tried a search for the draft message with the ID returned
from the Add with the following code:
string l_Str_Filter = "(BOX_TYPE = DRAFT)";
GroupwareTypeLibrary.MessageList l_O_DraftMessagesList =
fgwaccMailBoxMessages.Find(l_Str_Filter);
for (int l_i_MsgIdx = 1; l_i_MsgIdx <= l_O_DraftMessagesList.Count;
l_i_MsgIdx++)
Message l_O_CurMessage = l_O_DraftMessagesList.Item(l_i_MsgIdx);
if (l_O_CurMessage.MessageID.Equals(l_Str_OldMessageI D))
draftmsg = (Mail5)l_O_CurMessage;
break;
But none of the retrieved Draftmessages had the MesssageID returned by
the Add.
We only could reproduce the Behavior with > 60.000 Messages in a folder,
but in such a folder, it can be reproduced reliably.
Is there a way to circumvent this problem or to revconfigure Groupwise
so that this can be avoided? We use the Groupwise Object API of the
8.0.1 Groupwise Client via C#.
Thanks for your time.
Best regards, Martin Schmidt.

I created a bug to track the problem.
>>> On Thursday, May 20, 2010 at 8:27 AM, Martin
Schmidt<[email protected]>
wrote:
> Hello,
>
> we have a very weird behavior when accessing messages in the Mailbox
> folder with 660048 incoming messages and 48 outgoing messages.
>
> We retrieve a reference to a draft message by creating it with the
> following code:
>
> Mail5 draftmsg =
> (GroupwareTypeLibrary.Mail5)fgwaccMailBoxMessages. Add(message.ClassName,
> null, null);
>
> This works without problems and we get a Message object with a given
> MessageID A.
>
> Then after calling Refresh on that reference:
>
> draftmsg.Refresh();
>
> the MessageID suddenly changes and the Subject is filled. We found out
> that the reference suddlny points at a completely different message,
> because when we call "Delete()" on the reference, an entirely different
> Message, which isn't even a draft message, is moved to the trash.
>
> Similar behavior shows after executing the following code:
>
> FormattedText draftmsgSubject = draftmsg.Subject;
> draftmsgSubject.PlainText = "some String";
>
> The subject is changed correctly, but the MessageID changes wildly and
> the reference points to a different message again.
>
> Finally we tried a search for the draft message with the ID returned
> from the Add with the following code:
>
> string l_Str_Filter = "(BOX_TYPE = DRAFT)";
> GroupwareTypeLibrary.MessageList l_O_DraftMessagesList =
> fgwaccMailBoxMessages.Find(l_Str_Filter);
> for (int l_i_MsgIdx = 1; l_i_MsgIdx <= l_O_DraftMessagesList.Count;
> l_i_MsgIdx++)
> {
> Message l_O_CurMessage = l_O_DraftMessagesList.Item(l_i_MsgIdx);
> if (l_O_CurMessage.MessageID.Equals(l_Str_OldMessageI D))
> {
> draftmsg = (Mail5)l_O_CurMessage;
> break;
> }
> }
>
> But none of the retrieved Draftmessages had the MesssageID returned by
> the Add.
>
> We only could reproduce the Behavior with > 60.000 Messages in a folder,
> but in such a folder, it can be reproduced reliably.
>
> Is there a way to circumvent this problem or to revconfigure Groupwise
> so that this can be avoided? We use the Groupwise Object API of the
> 8.0.1 Groupwise Client via C#.
>
> Thanks for your time.
>
> Best regards, Martin Schmidt.

Whining Problem After 7 Days Of Use

I am experiencing a slight wining problem after only having the computer for 7 days. The funny this is that when i pick up the computer with both hands the wining stops. I think apple is having a grounding issue with these new laptops. Also the wining s sounds like its coming from the left side of the keyboard. Any suggestions? I already installed the keyboard update.
Thanks,
Dmitry

Now that you have the whining and have installed the keyboard update, you'll probably have to use the QuietMBP application.

Cs6 windows 8 after system refresh....installer fails to initialize

hi i was using adobe cs6 suite on my toshiba windows 8 machine. i had a problem and refresh my pc.during the process, windows removed all my apps. after the refreshing, i am trying to install back my cs6 suite but anytime i try install i get this error that.."installer failed to initialize" i downloaded adobe support adviser and it said there was a bootstrapper error ans also a restart wass pending. i restarted several times even after a windows update. the proble still persistsplease can somebody help me

Moved to CS forum.

Problems after Laptop Refresh

Similar Messages

Maybe you are looking for