Problems after migration from CS5 to 5.5 with Blackmagic Card

Hello forum,
we have an problem after an optimal migration from cs 5 to 5.5 projects.
different: there is an bm hd extreme 3d card in the system.
We are aware of the issue that there has to switch to BM player an the Timleinl settings to BM
But there is still a problem: we are not able to view the ingested material in the source viewer,
because there is another overlay - form the background or sometheing else - see attached photo.
We add new drivers for graphics/BM and patches for CS 5.5
None of these problems by creating new projects.
Also the applications also hangs after we try to close,
many thanks for your answers - Sven.

No reason to ask the same question twice. Just be aware that there are German forums as well.
Your problem is probably in the BM drivers.

Similar Messages

Problems with migration from CS5 to 5.5 with Blackmagic Card

Hallo liebes Forum, wir haben massive Probleme nach einem reibungslosen Import von CS 5 Projekten nach CS 5.5
Einziger Unterschied - jetzt ist eine Blackmagic Karte HD Extreme 3D im System.
TL muss auf BM stehen und BM Player in den Voreinstellungen eingestellt - ist klar.
Problem: es lassen sich keine Videos im Quellfenster mehr ansehen. Siehe Bild
Anwendung hängt sich beim Verlassen auf.
Patches von BM und CS55 sind neu.
Mit bitte um Hilfe grüsst freundlich der Sven

Ich habe gesehen dass du diese Frage auch schon in Englisch gestellt hast, aber die Lösung ist wahrscheinlich in dem BM Treiber zu suchen.

Problem after migration from time machine

I recently changed the hard disk in my macbook to a bigger one,
and then used migration assistant and my time machine backup to restore the system.
Everything seems to work just fine except aperture.
about 90% of my projects do not show any thumbnails, just outlined gray boxes with a file name
when I click on them I get to see the photo in question but when I click "show master" aperture says "master image offline" (and does not show the photo anymore)
my Library is referenced and the masters are located on the computers hard disk itself (not on an external one) and they are all there !
(i.e. they were perfectly transfered from time machine)
when I first opened aperture after the migration I got a message that the library was corrupted, I clicked repair and this produced a recovered folder
with a recovered project which as far as I can see is empty ?
I tried the 3 trouble shooting tools (repair permissions, repair database and rebuild database) none of which changed anything
I was going to try to restore the library file from time machine but now time machine says that I do not have permission to acces the pictures folder !?
(at least not on any backup older than the last one, which was done after the system was migrated)
I am starting to get stuck here, I found several references online to the same problem but no real solution.
Any ideas?

OK, so I did a clean install of snow leopard from the installation DVD and then used setup assistant to restore from time machine.
Since time machine had already made backups after I migrated for the first time it basically restored the system
to its previous state (with aperture not working properly), it did however restore the admin account which I had already deleted.
This allowed me to access my older time machine backups.
When I tried to restore the aperture library file (after first deleting the current one and emptying the trash)
I got a window saying copying 0kb from 10,68GB that just hung there
after checking my user account I found an aperture library file of about 6GB, I deleted this and did the restore again and let the window saying copying 0kb of 10,68GB run for half an hour, I then found an aperture library file in my account of 11GB. I opened aperture and guess what? exactly the same as before! no thumbnails and no access to masters except for about 10 projects (in fact every time I try this aperture makes previews for exactly 608 photos !?
I might try to copy the libary file from the old hard disk if I find something to mount it, but I am starting tho think that i will just have to reimport the entire library, and forget about the versions and be thankfull that I at least saved the masters :-(

Internet connection problem after migrating from Powerbook G4

After starting up my friend's new Macbook 2ghz for the first time, I migrated everything from his old Powerbook G4. However on starting the machine for the first time, although the Internet Status suggested his Airport connection to his Netgear router was working and that he was connected to the Internet, this was not the case, as the registration info could not be sent to Apple, the time/date wouldn't update and he could not browse or check e-mail.
Initially it occurred to me that perhaps the Netgear router didn't like the fact that the same Network settings (IP address) had been given to the Macbook when it had a different MAC address. However this didn't seem to be the case as I was able to add the new Macbook to the list of trusted devices and turn on Access Control, but this still didn't work
Eventually when I turned off the security settings, so that the password was set to "none", instead of WPA/PSK and then did likewise for the named network on the computer, I was able to get online at long last
However I don't want to leave the wi-fi system without any password protection for obvious reasons. His Netgear router is a newer model than mine and it had a choice of WPA2, and when I tried this and did likewise on the Macbook it was still working. Yet the matter gets more complicated as he also has a PC on the same wi-fi network and this would not accept the WPA2 setting on the router and I could not get online with the PC
I dont understand why WPA2 worked on the Macbook but WPA didn't and I need to find a password setting that works for both computers. I don't really understand the WEP option as the encryption choices are 64 and 128 but there's no 64 on the Macbook. More importantly I don't have the foggiest how to get a desired password, as when you put in a "passphrase' and click "generate" the router produces four different keys which are all decidedly impossible to remember and so totally impractical if you need to use these to log on.
I appreciate that this is a bit of a confusing query but if anyone can offer any assistance., I would be extremely grateful, as after all the time it took me today to suss out actually getting his new Macbook online, I am loathe to mess around without really knowing what I am doing and so I need to find a security option that can be used by the Macbook, his older Powerbook and a PC running Windows XP
With my utmost thanks in advance for any help you can offer, but please bear in mind I'm a bit of a techno-nincompoop so please be gentle with me
Many thanks
Bernard

Thanks a million for bothering to reply, it's very much appreciated. I rarely seem to get much success when I try searching in Apple support but I guess that must be because I choose the wrong search terms.
Since all the equipment is relatively new and quite high spec, I believe I should be able to use the WPA format and it's a matter of finding an arrangement that works with both the PC and the Macs. What I don't understand is why the Macbook appeared to be connected to the internet with a WPA password, but wouldn't in fact get online, until I either changed to no password, or to WPA2?
However I'm extremely grateful to you because those docs all proved well worth reading, if only so I might understand some of the technical gobbledigook (the avoidance of which was one of the principal reasons I became a Mac evangelist in the first place), as the whole password encryption thing has always been a complete mystery to me, hence for my own wi-fi set-up, I long ago settled for hiding the network and turning on the trusted devices access control, just to avoid having to deal with any of this technobabble. However my mate wants people to be able to log on to his network if they turn up with a laptop, but at the same time prevent totally open access to his internet connection to all and sundry, so this is not an option.
What really bugs me is that the interface for the Netgear modem/router (and any other router I've had experience with) never seems to work properly on an Apple, no matter what browser I use and having sold his family on the whole Apple experience, it's usually a bit embarrassing to have to squeeze my mercifully narrow backside into a baby's chair in order to use their PC to resolve any router issues (as the PC is only there for the kids to play games). But invariably it's only by using the browser interface on the PC that all the various options seem to work
Again much appreciate you going to the bother and the fact that there is relevant stuff in the support library leads me to believe I should attempt to find some more details which might resolve the WPA difficulties I've experienced with the new Macbook.
Meanwhile, although I am not so keen on the new glossy screen on the Macbook (I'm amazed you can't have the option of a matt one unless you get a bigger Macbook Pro), you've no idea how envious I am having to set up his new toy when I can't afford one myself. Mind you, the last time I told this bloke that if he wanted decent support for his iPod, he'd have to buy me one, he returned from the US with a 60gb model to match his (sadly pre-video iPods), so perhaps I should make matters more complicated by installing Boot Camp and Windows, so that I have to tell him that I can't offer support over the phone without one of my own
Kind Regards
Bernard
Macbook 13" 2ghz" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)

Runtime problems after migrating from Flex3 to 4 in compatibility mode

We are migrating our Flex-3.2 application to Flex 4.1, mainly to take advantage of the new text flow/engine features. In a first step we decided to go with compiling for MX-only and in Flex-3-compatibility mode.
Thanks to some helpful resources (
http://www.adobe.com/devnet/flex/articles/flexbuilder3_to_flashbuilder4.html
http://stackoverflow.com/questions/1563482/any-flex-4-migration-experience
http://www.adobe.com/devnet/flex/articles/flex3and4_differences_02.html
) I am able to compile our application.
But I find myself surprised about the amount of runtime differences ranging from the problem that I cannot cast ResultEvent.currentTarget to HTTPService ( which apparently was introduced in 3.5 ) to many layout problems to differences in event dispatching ( e.g. one of our legacy components listens to the add event which it just doesn't seem to get anymore ).
It seems there is very little documentation on this. I'd like to find a list with detailed changes so that we don't have to rely on QA to stumble across hopefully all issues.
This documents lists some, but doesn't seem exhaustive.
Does someone have a better list of documented changes from SDK 3.2 to 4.1?
Thanks
Stefan
PS. Concrete example of one surprising change:
In Flex 4:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:mx="library://ns.adobe.com/flex/mx" layout="absolute" minWidth="955" minHeight="600">
    <fx:Script>
    <![CDATA[
    private function notFired():void
    trace("ADDED");
    private function fired():void
    trace("COMPLETE");
    ]]>
    </fx:Script>
    <mx:TextArea add="notFired();" creationComplete="fired();"/>
    </mx:Application>
Now do the same in Flex 3 and you'll see both events fire.

The add event is a bug.

Problem after migration from version 4.50.933 to 4.60.911

Hello,
I have one server SGD with users, applications and servers declared on it in version 4.50.933. I have downloaded the version 4.60.911 to upgrade it. Before, I have made a new server and install the previous version on it. I have made it as secondary to import configuration. After this first phase finished, I have promote it as primary and stop it. The secondary has been promoted as primary. I have detach the secondary from my stopped primary and I have two same server with same users, applications and servers.
After this first step, I have installed the 4.60.911 on this clone server. The installation is successfully completed without errors. I can login on it but in the web administration interface, I have only applications. The users and the servers are not present.
In command line (with tarantella object list_contents --name ".../_ens/" command), I can see some objects but I want to see the contents of it, I have this error:
You must name an organization, organizational unit, Active Directory container
or domain component object.
I have done these manipulation several times and I can't import the data of 4.50.933 version to the 4.60.911.
Is there commands to rebuild the data? Or a method to import data from the previous version ?
I have too many users, applications and servers declared to reconfigure them manually.
Thanks a lor for your support on this topic.

I can't access to the link. When I try, I have this message:
Article or Bug cannot be displayed. Possible reasons are:
The article Id or bug number was entered incorrectly. Please check and try again.
The article Id or bug number does not exist (was referenced incorrectly).
The article or bug is not classified as publicly accessible ("non-public").
The content is being updated and it is temporarily unavailable but will be made available again soon.
If you still have questions about why you could not access this article or bug, please use Contact Us.
Back to top
Is it possible to have the solution here?

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Problem in Themes after Migrating from APEX 4.0 to 4.2

Dear Friends,
Recently we migrated from APEX 4.0 to 4.2. There were no errors during migration. But after migration we observed that any application with Simple Red (Theme No.1) and Scarlet (Theme 21) stopped working properly. i.e. Template button Red will not perform any task. Even changed the template of the button doesn't work.
Can any one suggest steps to solve the problem?
Thanks in Advance.
Krunal

Hi Prabodh,
This is the error i am getting
Timestamp: 11/30/2012 5:03:02 PM
Error: TypeError: ((f.event.special[r.origType] || {}).handle || r.handler).apply is not a function
Source File: http://testserver:8000/i/libraries/apex/minified/desktop_all.min.js?v=4.2.0.00.27
Line: 3
No i didn't modify any template.

Main icons are missing on Dreamweaver cs5.5 after migrating from one mac to another

Can someone help me? My icons are missing after migrating dreamweaver cs5.5 using migration assistance on a mac. I have no idea how to fix this...

Migration Assistant is not recommended for transferring DW to another system.
Uninstall DW in full and do a fresh re-install of DW from the installer (either CD/ DVD or a .DMG file).

Problem with Java Native Type after Migration from 7.0 to 7.1

Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
Peter

Hi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter

ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2

Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank You

Originally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above.

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

ITunes, iPhoto and system clock crash after migrating from Snow Leopard

Hello everyone,
I had MacBook Pro with Snow Leopard but had to migrate to older one with 10.5.8 today.
After 4 hours it finished and everything seems fine except 3 things:
1. iTunes crashes on each launch attempt. I even followed an article to uninstall it, got a new one from apple.com but I still have the same issue.
2. iPhoto opens with success and shows folders overview, but when I click to enlarge a photo I get a blank screen. After about 2 minutes the program quits unexpectedly.
3. System clock behaves really strange. It seems to ignore time zone settings completely. I select Melbourne, Australia and quit Sys preferences but when I get there back I still have GMT time. Setting manually gives me nothing - time of email is still GMT.
Anyone have seen similar problems after migrating? My primary guess is that this issues are caused by migrating to older Mac OS version, but maybe it's not the point. Anyway, would be great to have this fixed. Without iPhoto, iTunes and proper times in e-mail inbox my Mac is pretty useless...

I installed this update, restarted but nothing helped. By permissions - what do you exactly mean, how could they change or what could be broken?
I also noticed that what is broken as well are the PYM Player and Quick Time. When I open a movie, I got the sound but no video output at all. It is similar to iPhoto where I see the miniatures but normal size viewing goes blank.
Does anyone has a clue what can be broken that causes such problems?
My Mac is now really just an e-mailing and surfing machine...

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Problems after migration from CS5 to 5.5 with Blackmagic Card

Similar Messages

Maybe you are looking for