Problems after regressing back to 6.0.5 from iTunes 7...

After regressing back to 6.0.5...when I click on the iTune icon all desktop icon's (resolution) are enlarged to 800 by 600 pixels,and iTunes does not open. After repeated attempts iTunes comes up in the enlarged format that extends off page. Changing screen resolution (to 1024 to 768 pixels) in Display settings is just temporary. How do I correct this problem?
Dell Inspiron 1150 Windows XP

I've restored my ipod using iTunes 7 on a PC and it appears to be working.... I'm slowly and carefully loading up the ipod with music wondering if at some point I'll hit a damaged disk sector which might have caused the problem?!?!

Similar Messages

Problem (err = -3259) downloading iOS 5.0 software from iTunes (10.5.0.142)

Thereis a problem (err = -3259) downloading iOS 5.0 software from iTunes (10.5.0.142)to my iPhone4 (v4.3.5). Laptop OSWindows 7 x64 Business Edition Service Pack 1 (Build 7601). I have trieddisabling the firewall and Kaspersky but as it finishes downloading all 774.4MBit crashes with err = -3259 saying the network connection timed out! Highlyfrustrating as it takes a while to download the software, any suggestions?

Ok, so the trouble I experienced was last week during the fury of downloading from iPhone users all over Earth. I left the problem alone from 10/14-10/18. This morning, I started again. Turned my pc on from it's previously "Shut Down" state, opened iTunes, connected the phone, attempted to DL iOS5. After 20 minutes, I got a similar message, however, this time it wasn't marked 'err-3259'. It said only verbiage to the effect of "the network timed out." I then disabled my Kaspersky and Firewall. Without hope and with much reluctance, I tried the DL again. After several minutes, while I was working on something else, I noticed my phone went into "sync" mode. The rest is history! The DL and updates completed and now the phone is working as it should with the updates (It's an iPhone 4). Lastly, I reinstated protection from Anti-virus and Firewall. Give this a try and I hope it works for you.

Repeating problems (1) Many Missing Files; and (2) Downloading From iTunes

I am having multiple issues with the iTunes store currently. I have spoken with an Apple Expert on August 14, 2010 (case number available if needed). Although he was very good at helping me to the best of his ability, he referred me to iTunes Store Customer Service, which I previously was in contact with.
I have 2 types of repeating problems (1) Many Missing Files; and (2) Downloading From iTunes Store.
_Problem One - (1) Downloading From iTunes Store_
I have 1610 missing files from my iTunes folders. I created a list of missing items by following these steps:
+If for any reason you find yourself with random missing tracks, (or are trying to recover from a dying hard drive like me), there is an easy way to isolate those missing tracks.+
+1. Create a standard playlist called "Not Missing".+
+2. Drag your entire library into that playlist. Missing tracks cannot+
+be copied to a playlist.+
+3. Create a smart playlist called where you select the following conditions in the options window for the new smart playlist:+
+*dropdown menu* PLAYLIST+
+*dropdown menu* IS NOT+
+*dropdown menu* NOT MISSING.+
+4. Rename the smart playlist "Missing"+
+5. Right Click the "Missing" playlist+
+6. Click the "Export..." option+
+7. Select the Plain Text option and Desktop location+
My missing playlistable items represent a better part of a decades worth of audiobook files, transfered files from my PC days, etc... i loved my - now missing - Doctor Who and Torchwood purchases from iTunes.
I have already read the Trouble Shooting, checked Time Machine Backup, and been walked through replacing the preferences list. The missing file path from the "get info" options in iTunes points towards a non-existant file.
_Problem Two (2) Downloading From iTunes Store_
I have had problems downloading files from iTunes for months. I first noticed it with the TV Show "Avatar: The Last Airbender". Lately, when I download from the (non-music) part of the store, the majority of files are downloaded and then immediately not found. This has been prompting iTunes to repeat the download. Until I force quit itunes and *potentially cry*.
There have been multiple iTunes store purchases of audio books recently. If I reported the missing file immediately, I can contact iTunes support to repost the file and that usually fixes the issue. But today, I went to go rewatch "Torchwood: Children of Earth" and noticed Problem One.
_Hind Sight_
If provided with a spreadsheet of my iTunes Store purchase history, I can write a vlookup( formula in excel to compare the list against my exported missing list so a shortlist of what is missing from just my iTunes Store purchase history can be created (hint: it's the majority of items from the list, others are years worth of files from my PC days). If we could do that, could iTunes make my missing purchases available?
Then we can focus on purely, trying to figure out why they went missing in the first place - so we can prevent it again & possibly help others from running into the same.
Plea
I strongly suspect the two issues are related to a root cause ... in addition to my user error in file management of backups ... what is going on?

iTunes Support (Eric) emailed me some instructions. I am posting, in hopes that this will help others.
_Suggestions from iTunes Support_
Troubleshooting 1. iTunes Store: Finding missing purchases and downloads http://support.apple.com/kb/TS1408
Troubleshooting 2. Direct Assistance
_Results based on Suggestions_
Results on "Searching the harddrive" - did not resolve my concerns
Results from "Direct Assistant" - i emailed the list of the missing files... status is pending
Conclusion
I'll follow up again later, if I have new news.

After syncing my music to my iphone from itunes, my artist information doesnt match what shows on my itunes

After syncing my music to my iphone from itunes, my artist information doesnt match what shows on my itunes

You will have to sync your iphone to this computer first, erasing the current content and replacing wioth content from the new computer.
Make sure you have copied everything from the old comptuer to the new one first.

HT201272 Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

Will the app run on iPhone3GS. Some of the newer apps require IOS 5 or later. This info should be displayed witht the app in itunes store

Imessage problem after ios 5.1.1 updating directly from device.

My iphone 4s cannot receive imessages and send messages only as emails after updating to ios5.1.1 directly from the device(not with itunes). In the imessage section , to the part where my number is , it says that has an error. Any help??

Settings > General > Reset > Reset Network Settings.
If that does not resolve, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

No Wi-Fi after using Apple TV to watch video from iTunes?

After watching video from iTunes library on ATV2 , when trying to use mac afterwards wi-fi slow or stopped. I Have to unplug router to get it working again. Don't think its always being like this?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

After software update I can't drag from iTunes directly into Garageband timeline, always could before, how can I fix this?

After software update I can't drag songs from iTunes directly into Garageband timeline, always could before, how can I fix this?

Same problem here but figured it out: Drag the song from the Media Browser tab (after selecting iTunes at the top) at the bottom right when you open a new GarageBand project. Hope this helps you -- working perfectly for me!

Hi was wondering how i get back all my purchased music from itunes. i plugged my phone in to my computer and it syned all my old purchased music from my ipod list and not all my new purchased music is gone.

I am having trouble getting back all my purchased music from itunes

Does music show in the Purchased tab in the iTunes store app on your phone and the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes for redownloading ? Whether music will show there will depend upon what country that you are in - and even if music does show it will also depend upon whether it's still in your country's store.
If you aren't in a country where you can redownload music and you don't have copies of it anywhere, then you can try contacting iTunes Support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Will my contacts and their pictures including their number be back if I restore it from itune?

So I'm planning to Erase All Content And Settings on my iphone. But before that, of course I'd do I back up. So will my contacts and their pictures be back if I restore them from the back up?

More info on what iCloud backs up http://support.apple.com/kb/PH12519?viewlocale=en_US

Problem after downgrading back to ITv.6....missing music during iPod synch?

I recently happily downgraded back to iTunes v.6 after experiencing a nightmare with iTunes v.7. Since re-installing v.6, everything is fine except for one strange and annoying problem. I'm hoping someone can help, so here goes....
Now, when I synch/update my iPod as I had always done (not automatically, but with selective playlists checked), about 400 of 1700 songs do not transfer from my G4 to the iPod. However, when I switch to update with the automatic option to include all playlists, all 1700 songs transfer over to the iPod. I believe I've narrowed this problem down to one particular playlist which may not be getting recognized by the iTunes library. In other words, I want this one playlist to appear in iTunes, but not on my iPod. But, if I try to update with this one playlist unchecked, 400 songs do not transfer over. This seems odd since all music files (mp3s) from all playlists are located in the iTunes music folder on my hard drive.
So, my question is....how can I go back to updating my iPod to include all of the 1700 songs in my library, but without the one particular playlist (which is quite large)? As was the case before the iTunes v.7 debacle, is there a simple way to get my library to recognize the particular playlist so I can update my iPod selectively without putting that playlist on my iPod? I've tried to do some online research before bothering the wise people on this Board and it would seem that I either need to: 1) somehow import that particular playlist back into my iTunes library or 2) create a new iPod library file which I understand may cause me to lose my playlists and comments. I'm afraid to do either without some guidance, for fear of making the situation worse. I'm not very technical and I'm guessing there's a simple fix for this, so I'd sincerely appreciate any help and advice. Thanks very much.

Here's the log:
Process:
Safari [23855]
Path:
/Applications/Safari.app/Contents/MacOS/Safari
Identifier:
com.apple.Safari
Version:
Build Info:
WebBrowser-75345910~1
Code Type:
X86 (Native)
Parent Process: launchd [278]
Date/Time:
2014-05-07 16:14:33.635 +0300
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
235635 sec
Crashes Since Last Report:
22383
Per-App Crashes Since Last Report:   13
Anonymous UUID:
6AD6BC48-95D3-42C3-A22F-66FAE28F420B
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/lib/libc++.1.dylib
Referenced from: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/WebKit2
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld

Problems after a "back out"

Dears:
I'm experiencing problems with my router WRT54G Version1.1/ The problem began after a power black out.
I have checked the ISP connection already (connecting directly one of my computers to the modem), it is working fine, communication with the modem and internet browsing all normal.
I have observed also that the router is gathering the IP which our ISP send or assign. It means the router gathers it without problem therefore WAN handshaking is established.
Router LAN side is working properly, all computers connected to LAN side work fine. IP’s, etc. also are ok.
Router bridging between LAN and WAN (probably NAT function) does not work at all. Any computer from the LAN side can’t go out to internet even though using factory default settings.
Many configurations were tested, including upgrading the firmware to latest version but problem still remain.
Have you have this issue before?
Our problem happened after a black out. Before taking the decision to buy a new router due a hardware problem I would like to hear from some of you if it could be related with the router software, flash memory, etc, if so, how to address it?.
Waiting for your reply
Best regard

Thanks my friend:
Let me tell you that I've solved the problem. I downgraded the firmware to my last working version which was 4.30.5 and all come to normality.
Believe it or not, the last version 4.21.1 did not work in my router. I was trying to do a tracking of the firmware versions and I found a discrepancy between the last two for this model.
Fortunatelly I had the previous one otherwise I wouldn't be able to restore the fucntionality of my router.
According to the information tracked in my backups was 4.20.7 after that, version 4.30.2 & 4.30.5 were issued. (May,2006) That was the last time I upgraded the firmware.
Actual version posted in linksys web site is 4.21.1 (the latest firmware) despite it contains the fixes described in versions 4.30.2 & 4.30.5 plus solving access restriction problem does not work in my router. After many tries, I gave up and left loaded the version 4.30.5
Now everything is working as usual but still with the access restriction issue.
I guess I'll leave it as it is.
Hopefully this info can also help others.
Regards,

Problems after upgrading to Quicktime 7.1.3 from 7

After upgrading to QT 7.1.3 images that were fine before in videoclips, still shots and content in webpages now have a faint Q with a ? in the middle. On my daughters myspace page some of the clips and images she had uploaded, now show this too.
I tried to restart, I also just tried upgrading to QT Pro to see if that help. NOPE.....
PLEASE HELP
G4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9) Lacie DVD drive , HP 7310 all in one, G drive 250GB external

check my posting. I went back to flash 8.022 and most things started to work again....
QT logo with Question Mark and Blank screen sound ok on training videos
Posted: Mar 19, 2007 12:35 AM
Reply Email
I suddenly had all sort of problems (before 10.4.9) with QT logo and Question Marks throughout all browsers and also suddenly unable to continue training programs using files such as "avibasicmono.htm" and "introbasicmono.htm" .
finally think I have solved the QT logo by replacing Flash 9.0 with the old 8.022.
I could now also see current issues of magazines again on a site www.picturebusiness.uk.com (weird naming).
however I am not able to see the training videos at all but I hear the AVI files
Macosx 10.4.9 Quicktime 7.1.3 (removed 7.1.5 to try that option did not work)
will stay with what works until I hear more...

Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
"PI-upgrade-bundle-1.2.0.103.tar.gz".
after the upgade I have got the Message "Upgrade Successful".
Now when I start the NCS i get the following error message
egghead/admin# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
In the launchout.log are this messages:
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
truststore used is /opt/CSCOlumos/conf/truststore
truststore used is /opt/CSCOlumos/conf/truststore
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting Remoting Service: Reporting Server
Checking for running servers.
00:00 Check complete. No servers running.
Starting Server ...
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
Starting Remoting Service: Reporting Server
The Report Server startup script is already running waiting for report server to start
have anyone an idea whats wrong?
thank you for your help
Kurt

i have the same problem
NCS/admin# ncs status
Health Monitor Server is starting.
Reporting Server is Starting
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is stopped.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
I try it
To get it back up and running do the following from the CLI.
1. Stop the NCS
2. Run 'ncs db reinitdb'
3. Start the NCS
but the status is the same

Problems after regressing back to 6.0.5 from iTunes 7...

Similar Messages

Maybe you are looking for