Problems after SPS 15 - Portal BI

Hi,
we have problems after implementing SPS 15 for NetWeaver 7.0 in BI (SP17) and Portal(SP15).
Webtemplates developed with WAD 3.x not working in Portal after the upgrade... Additional Excel 2000 download functionality used in BI 7.0 Templates is not working.
Any suggestions or same problems?
Regards
Andreas

Hi,
I have tried this... Unfortunately it doesn't help.
The 3.x Templates show no queries instead of that they are showing an empty 0AnalysisPattern...
Preview in Portal works fine.
Regards
Andreas
Edited by: Andreas Schindler on Apr 23, 2008 2:12 PM
Excel problem is solved...

Similar Messages

Vendor problem after SPS

We are running SRM Server 5 and just applied SPS 14 to our sandbox system and are running into a problem. The scenario is that an invoice is created against a PO through the SUS portal and then sent from one client to the other via XI. All XI messages execute correctly (and the payload looks correct) and there are no errors on either client. When displaying processed invoices on the EBP side the vendor is not coming through along with several other inconsistencies. Does anyone have any ideas as to what is causing this?
Thanks,
Dave

Hi,
Check if the SUS and EBP vendor mappings are correct- table venmap in SUS. Also check message mappings in XI. Try and reimport message mappings through XI.
Regards,
Sanjeev

Problem after installing OracleAS portal on DHCP machine.

Hi
I'm currently running Windows Server 2003 R2 on VmWare, and have installed OracleAS portal on a DHCP machine. However it has been causing me problems, and I realized I have overlooked the system requirements (Section 4.2) by not installing a loopback adaptor prior to the installation.
Now, my portal server goes down whenever the IP addresses changes and I'm at a loss on what to do. I have installed my portal on the following IP config details:
IP address: 10.0.1.105
Subnet Mask: 255.255.248.0
Default Gateway: 10.0.0.1
However the recommendations (on the documentation Section 4.8.6.3) were for me to use the following IP config details:
IP address: 10.10.10.10 (or 192.168.x.x) [x is any value between 1 and 255]
Subnet mask: 255.255.255.0
Thus even if I have followed the instructions on Section 4.8.6.3 (after I have installed the portal) - The server won't be running because the host is still on 10.0.1.105. What happened after my IP changed was error pages that ranges from:
- 505 Server Down
- The connection timed-out
This my first time installing an Oracle Product, and I'm new to networks so I would really appreciate any help and advice on this problem I'm facing. I'm not sure what other details that I need to give for you to effectively help me solve this problem. Please help.
Thanks!!

The 2gb partition i talked about it's the one given by using INTERNET RECOVERY, so, it seems that i do not have any recovery partition in my mac, so, problem resumes to restoring system by the last copy in time machine which is not showing in internet recovery, but it does shows in my user account.
Thanks for help!

Problem with Application Server Portal 9.0.2.0.1.

I have a problem with Application Server Portal and Wireless 9.0.2.0.1.
Firstly I've installed the infrastructure on a Pentium 3 866Mhz 512Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've maintained all predefined settings and I've chosen the UTF8 character set.
After installation, my infrastructure and OID works fine. The OID has port 4032 (as set by Oracle Universal Installer) instead of predefined 389.
After this I've installed Application Server Portal and Wireless on another host: a Pentium 3 733Mhz 384Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've also maintained all predefined settings and automatic configuration of Portal and Wireless. I've pointed to my Infrastructure.
Try to test the Portal demonstration but an error occurred:
"SERVICE TEMPORARILY UNAVAILABLE. The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later."
On my EM Console I see: component instances 'OC4J_Portal' and 'OC4J_Demos' are UP, instead 'Portal:portal:7777' is down.
On the component lists I've clicked the link of component instance Portal:portal:7777, the 'control services' and 'Accessible Server SSO' are started, while 'Accessible Portal Repository' is down.
What can I do to get my portal started?

hi,
i have exactly the same problem. did you solve yours?
any suggestions or help how to do it?
thanks
erik
please reply to this post or [email protected]

Computer problems after upgrading to Mavericks

SO many problems. I cleared out a ton of old stuff that I saw might be causing problems, and I've verified and repaired the disc, and uninstalled and reinstalled a couple of programs that I was seeing problems with in the console, but now I'm just flummoxed. It's behaving better than it was earlier, and isn't giving me the beach ball nearly so often, but it still seems like it's taking too long for a lot of things. I just reinstalled Avast and am currently letting a game update through Steam. I have the console and the activity monitor open to one side. Since I opened the console, it's been spitting out one or two messages every second, and all I can find through some internet searching is that it's something to do with the wireless connection. There's some other stuff periodically mixed in that doesn't sound good either, involving either sandboxd or mdworker. But for the most part it's along these lines:
Nov 5 00:59:52 kate-lenthalls-macbook-pro kernel[0]: 1516.810543: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:53 kate-lenthalls-macbook-pro kernel[0]: 1517.811065: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:54 kate-lenthalls-macbook-pro kernel[0]: 1518.811534: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:55 kate-lenthalls-macbook-pro kernel[0]: 1519.811686: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:56 kate-lenthalls-macbook-pro kernel[0]: 1520.812774: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 23 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:58 kate-lenthalls-macbook-pro kernel[0]: com.avast.AvastFileShield Warning: Unable to retrieve file path. Skipping. [22]
Nov 5 01:00:27 --- last message repeated 208 times ---
Here's my report from EtreCheck:
Hardware Information:
          MacBook Pro (17-inch 2.4GHZ)
          MacBook Pro - model: MacBookPro3,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          GeForce 8600M GT     - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:30:19
Disk Information:
          ST9500420AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 413.49 GB (122.62 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 85.76 GB (28.21 GB free)
USB Information:
          Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.eltima.ElmediaPlayer.kext          (1.58)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
          com.avast.PacketForwarder          (1.3)
          com.avast.AvastFileShield          (2.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.eltima.ElmediaPlayer.daemon.plist
          [failed] com.google.GoogleML.plist
          [loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [not loaded] com.avast.home.userinit.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.markdouma.SourceFinaglerAgent.Portal.plist
          [loaded] com.valvesoftware.steamclean.plist
          [not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
          Flux
          smcFanControl
          GrowlHelperApp
          Google Notifier
          FreeMemory
          TrashMeHelper
          Cloud
          sidenote
          Temperature Monitor
          avast!
          Dropbox
          Alfred 2
          Activity Monitor
3rd Party Preference Panes:
          avast! Preferences
          PenTablet
          Flash Player
          GeekTool
          Growl
          MultiBrowser
          Shades Preferences
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: YES
          Auto backup: NO
          Time Machine not configured!
Top Processes by CPU:
              24%          Console
              10%          WindowServer
               9%          LotroLauncher
               2%          steam
               1%          EtreCheck
               1%          mds_stores
               1%          mds
               1%          com.avast.proxy
               1%          Activity Monitor
               0%          empdaemon
Top Processes by Memory:
          180 MB             steam
          156 MB             Safari
          152 MB             LotroLauncher
          150 MB             mdworker
          147 MB             mds_stores
          139 MB             com.apple.IconServicesAgent
          70 MB              Dropbox
          70 MB              Console
          66 MB              com.apple.WebKit.WebContent
          61 MB              Finder
Virtual Memory Statistics:
          207 MB             Free RAM
          1.81 GB            Active RAM
          1.46 GB            Inactive RAM
          513 MB             Wired RAM
          2.39 GB            Page-ins
          3 MB               Page-outs

I just reinstalled Avast
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. It's worse than the imaginary "viruses" you were worried about when you installed it. Not only does it fail to protect you, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
Back up all data, then remove "Avast" according to the developer's instructions. Reboot.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and follow the instructions linked above.
If you still have problems after following those instructions, post again.

Formatting problems , after upgrading to 8.1.7 client

Hi all
Recently I upgraded my client to 8.1.7.
Immedietly after that, one of my reports(Report Builder 6.0.8.12.1) which was printing fine, starting having more space between words , and that too only on the last page of the report.
Kindly share any similar experiences or solutions.
Thanks

Yeah, its true that most of the objects where not in valid form. I tried to recompile them all, but still few were left invalid.
And the problem still persists. I even tried to restart the iAS. And one more thing, Oracle 8.1.7 install its own Apache and does also make changes into Registry settings. Can this be the reason for the problem?
Now I think the only option left is to uninstall portal and also the login server and reinstall it. Is there any other way out....
If we go for uninstalling, then can I take backup of all my portlets and can restore it back after reinstalling Oracle portal. Apart from normal import/export process, which is bit complicated, is there some other way to do this task?
Any new ideas are appreciated..

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Empty Screen after logging into portal

Hi,
I have installed SAPNetweaver 2004S, SP9 trial edition.
After logging into portal , Masthead and Tool area are visible and reamining part is empty screen . Toplevel navigation , detailed navigation, desktop innerpage are not getting displayed.
Can somebody please help me in resolving this.
Regards
Venkata Chithirala
Message was edited by:
Venkata Chithirala

Hi
The portal display creates problem when you try to access the portal using the IPADDRESS instead of the host name for the portal.
What you can do is make a entry in the hosts file for the portal server and then try to access the portal using the name given in the hosts file.
http://servername:<port>/irj
servername is the entry which you have given in the hosts file.
Dont use the IPAddress while accessing the portal, if by chance you are using it.
This shoud solve your problem.
Regards
Sumit Jain
**Reward with points if useful.

Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanks

Hi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen

Link problem after 3.0.9.8.4 patch

Hello,
there is another problem, after applying 3.0.9.8.4 patch on my portal. Link in reports doesn't work properly - before it works well, but now with the new version the link doesn't send parameters (it can be seen in URL) - but it should. I set link and the report properly, as i set many times before.
Is it another bug after patch 3.0.9.8.4 on MS WIN, or did I something wrong? Has anyone an idea how to avoid problems ? Will there be patches in few days ? If not, so what can I do, reinstall patch, what was correctly apllied, or reinstal whole portal ?
Any help would be appreciated.
Ales Hrncarek ([email protected])

THE PROBLEM IS NOT SOLVED.
I used report.
1) SQL query
select * from table@dblink
2) give to one of the table's columns a link, then click to assign parameters - it is ALL OK.
------BUT----------
1) SQL query
select [only a few columns from table] from table@dblink
2) give to one of the table's columns a link, then click to assign parameters. When I populate the window to assign values to parameters from link, there are filled LOVs and when i set them, they reset again after I click APPLY buton - AND ---> that is more important THE LINK DOESN'T SEND PARAMETERS AT ALL. (can be seen in page source -html)
it all worked before 30984. I'm angry because this week my work stopped and I have to solve this kind of problems, which haven't end.
Can somebody asure me, that there will be patch soon - in few days, or I should reinstall whole portal ? Or is a workaround here ?
Please help. Thanks. Ales Hrncarek

Problem after upgrade (which I never really wanted in the first place)

OK....had to restart Spiceworks this morning and I was FORCED to upgrade to v7.4.00075. Ive gained nothing with this upgrade that Im going to use and I now have problems with my users getting logged into the portal and getting notifications that Im losing connection to the server. I really wish I had a choice regarding updating because we seem to run into problems after each upgrade. Accounts that worked fine for the last 3 years, are now reporting "Account has not been activated yet" (see attached). Im also seeing "Connection to the server has been lost" but that eventually goes away and I am in fact still connected to the server.For the account not activated issue, Ive looked in the "People" setup and I see these accounts and they appear to be active and I also verified the accounts in our AD. Can someone from Spiceworks support...
This topic first appeared in the Spiceworks Community

OK....had to restart Spiceworks this morning and I was FORCED to upgrade to v7.4.00075. Ive gained nothing with this upgrade that Im going to use and I now have problems with my users getting logged into the portal and getting notifications that Im losing connection to the server. I really wish I had a choice regarding updating because we seem to run into problems after each upgrade. Accounts that worked fine for the last 3 years, are now reporting "Account has not been activated yet" (see attached). Im also seeing "Connection to the server has been lost" but that eventually goes away and I am in fact still connected to the server.For the account not activated issue, Ive looked in the "People" setup and I see these accounts and they appear to be active and I also verified the accounts in our AD. Can someone from Spiceworks support...
This topic first appeared in the Spiceworks Community

Timeouts and connection problems after 5.1(2) upgrade

AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?

I don't know specifically, but I did notice that 5.1(3) was released today.

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Problems after SPS 15 - Portal BI

Similar Messages

Maybe you are looking for