Problems after SSD and RAM install

Model Name: Mac mini
Model Identifier: Macmini6,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MM61.0106.B03
SMC Version (system): 2.8f0
     I just recently installed 16GB of Kingston RAM rated for Mac use. (MACMEM 2x8G|KST KTA-MB1600LK2/16G R) and SSD (Crucial MX100 CT512MX100SSD1 2.5" 512GB SATA III MLC Internal Solid State Drive) I used Carbon Copy to back it up at first, then I tried Time Machine.
     What it seems to be doing is hanging at the startup loading screen (until I zap the PRAM or restart it several times with the button) it also won't wake from sleep every few times. It has been a super intermittent problem. I put all the hardware into my Macbook Pro late 2011 and it ran just fine with no hickups. Also tried putting the hardware back to stock in the Mini and it was still doing this. This morning it restarted itself from an error which I will post down below.
     I would greatly appreciate any input to what could be going on here. Thank you.
Anonymous UUID:       9DC0979B-7323-105C-AF5D-421B430E010E
Thu Nov 13 08:26:18 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff8005fc4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 0), Frame : Return Address
0xffffff81efc3be50 : 0xffffff8005b3a811
0xffffff81efc3bed0 : 0xffffff8005fc4594
0xffffff81efc3bf40 : 0xffffff8005fc425c
0xffffff81efc3bf50 : 0xffffff800604dcb2
0xffffff81efc3bfb0 : 0xffffff8005c3ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000005800000
Kernel text base: 0xffffff8005a00000
__HIB text base: 0xffffff8005900000
System model name: Macmini6,2 (Mac-F65AE981FFA204ED)
System uptime in nanoseconds: 868200991526
last loaded kext at 9570241423: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f86711000, size 69632)
last unloaded kext at 143412312469: com.apple.driver.AirPort.Brcm4331 800.20.24 (addr 0xffffff7f8766a000, size 2043904)
loaded kexts:
com.apple.filesystems.msdosfs 1.10
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleMikeyDriver 266.5
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.iokit.IOSerialFamily 11
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: Macmini6,2, BootROM MM61.0106.B03, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.8f0
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3038372E4130304C4620
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3038372E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10E), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Crucial_CT512MX100SSD1, 512.11 GB
Serial ATA Device: APPLE HDD HTS541010A9E662, 1 TB
USB Device: USB3.0 Hub
USB Device: Hub
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: USB2.0 Hub
Thunderbolt Bus: Mac mini, Apple Inc., 23.4

No. almost all 2012 Mini come with the rotting HD installed in the lower bay, the one nearest the top when you flip the Mini over to do the replacement. Some users have reported problems with installing an SSD in the normally empty upper bay for which you have to use a third-party cable. No one is sure why some do not work.
I have a 2012 Mini and moved the original HD to the upper bay and installed the SSD in the lower bay and only has a problem with loose cable connection to logic board after I moved the Mini some time after the installation.
LexSchellings wrote:
I am not 100% sure but I seem to remember that you better install it in the upper bay.

Similar Messages

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

Lenovo Yoga 11s SSD and RAM Upgrade - Great Results

Picked up a Lenovo Yoga 11s from Best Buy. I chose Best Buy for price, color, and processor. They had a slightly better deal than Lenovo.com. The clementine color looks great. Quality is great. I'm very happy with the purchase. It has the i5 processor, 4GB RAM, 128GB SSD.
I upgraded the SSD and RAM and found the upgrade relatively easy. Here is a basic step by step and results. (note the parts I chose increased the cost by close to $400. I chose these parts based on quality, performance, and power usage. There are cheaper alternatives, but I wanted an upgrade and money was not my concern.)
Upgraded Parts
RAM - Patriot Memory 8GB PC3-12800 1600MHZ CL11 1.35V - Purchased at Newegg, but could have saved a couple dollars on Amazon.
I chose this part based on previous experience with Patriot and the low voltage RAM. A lot of the RAM is higher voltage and I wanted to make sure I reduced heat and power usage. When you look for 1.35V RAM, there are not a lot of options...
MSata SSD Drive - Intel SSD 525 Series 240GB Drive
Intel SSD Page
I purchased through Newegg
I chose the Intel drive based on previous experience with Intel. They cost more, but I've found their performance to be good and reliability good. There is also a good review on this drive on Tomshardware Tomshardware Intel 525 Review. Toms review shows top performing drive and low power. I also looked at many other manufacturers and Intel had the lower power consumption. This means less heat and longer battery life.
Cloning Software
Intel provides a free cloning software from Acronis
My Digital SSD MSata external case
I purchased through Newegg.
Nice quality device. I used this to help in cloning the OEM SSD to the new Intel drive.
T5 Torx Screw Driver
I purchased this from Home Depot T5 Torx Home Depot
I read all the reviews, posts and issues around cloning the Win8 SSD drives. Many people have/had issues. I was prepared for problems. Another reason I chose Intel, as they have migration software that I felt would be top notch.
You need to have the Hardware Manual handy. I read how to remove keyboard and top cover. This is required to upgrade RAM and SSD. It was very easy. Take your time. Note, this is very different than the Yoga 13 youtube video for part removal. I think it's easier. Here is the link to download manual Yoga 11s Hardware Manual.
How to clone your SSD
I expect if you're doing this project you can learn how to use the Intel software for cloning. Read the web, watch their youtube video. Read the manual...
Remove your factory SSD and insert new Intel SSD (note, you must insert Intel drive in notebook for cloning. Do not try and clone on the USB external drive. Intel software will not detect drive properly). Create a bootable version of the Intel software on a USB drive. Install your factory OEM SSD in the external MSata SSD drive. Go to BIOS and set boot to support legacy, no fast boot, boot to USB.
Boot to the Intel Acronis app on the USB drive. Then connect your OEM SSD via second USB port.
Then follow the wizard on Intel's software. Cloning process took less than 5 minutes.
Unplug your USB devices, go to BIOS and set all all your boot settings back to factory UEFI, fast boot etc.
The PC booted to windows second try. The first time it said it has issues and went through a process to repair. It then said it failed. I rebooted again and it went straight to windows. Did all my windows updates and everything is fine.
Performance
Windows Performance Improvement
Memory - Factory score was 5.9 - Patriot Memory is 8.2 *** Nice Improvement
Hard Drive - Factory score was 6.2 - Intel 525 Drive is 8.2 *** Nice Improvement
This pc is crazy fast booting and shutting down. It boots in 7 seconds. Not sure it's really faster than OEM, but I've never seen a pc boot this fast.
Over all performance is fast. I installed Office 2010 pro from a USB drive in under 5 minutes. Web browsing is crazy fast. I'm super impressed with the speed of this pc. Much faster than I expected.
Size, Shape, Weight, color is great. Performance is great. Happy with upgrades and quality of parts. May be my best notebook purchase to date. I don't have any battery life numbers to report yet. Everything is new and I haven't really spent much time off the charger.
Issues I've experienced during this upgrade of parts
I first tried to clone the SSD drive by putting the Intel drive in the USB enclosure first. The intel software would not work as the PC detects the external SSD drive as a SCSI drive and Intel cloning software could not identify the drive as an Intel Sata drive. I called Intel and they had no advice or help. I also tried a few other cloning softwares that ultimately did not work. As a last resort I switched the drives and everything worked great. Lesson learned, swap the drives first and use Intel software to clone.
Factory restore - doesn't work. Not sure why the factory restore is not working on my new Intel drive. Windows works great! All the partitions are there. I suspect I messed up the OEM restore portion of the drive. At one point I thought I had booted to the Intel drive, and tried the restore (I had about 7 failed cloning tries before the final one worked as I outlined above). It went through the restore process and then failed. However, what I later found was that I had actually booted to the OEM drive in the external USB case and I may have corrupted the restore functionality.
I contacted Lenovo Support and explained I could not restore using the 1 key restore. They walked me through some basic troubleshooting and then opted to mail me factory restore disk. I have the disk and will keep them available for when/if I ever need to restore.
Solved!
Go to Solution.

I upgraded from the Yoga 13 to the 11S and am happy to report that the machines are so identical that apparently you can just yank the SSD from one and drop it in the other. I had upgraded my 13" to 240gB SSD + 8gB RAM and simply plopped the two components into the 11S and after about 30 seconds of Windows alerting me that it was 'setting up devices' the machine booted normally and has been working perfectly since!

Finally got my ssd and ram, any pre/post installition advice?

After having looked at various places on the internet, I finally got 8GBs of 1066mhz ram and 128 gb SSD of Transcend and OCZ make, respectively. I'm going to install it on my MBP 13inch tonight. its 12.40 AM here and I shall be waiting for the final pre and post installition adivce from you fine geeks out there!
What I'm planning to do...
I've made a recovery disk of Lion on a pen drive. After a TM backup i'm gonna install the SSD inside the MBP, clean install Lion using the recovery disk, start a fresh copy of Lion. Then I'm gonna selectively load stuff from my old hdd to the new one that i would want on the SSD, using a USB to Sata 2 cable.
I have still not opened the packing. Just to confirm... Sata has to be sata 2 for the ssd and ram should be 4gb x 2 of 1066 mhz for my machine right?
dont forget to also give ur pre/post installition advice. Like the TRIM enabling etc....
Neerav

AceNeerav wrote:
dont forget to also give ur pre/post installition advice. Like the TRIM enabling etc....
Neerav
MacFixIt Tutorials
MacBook Pro: How to remove or install memory
Do-It-Yourself Laptop Repair
Research YouTube's 'How To' video tutorials

I cant open Tools in Menu of Mozilla. Even after upgrade and re install.

I cant open Tools in Menu of Mozilla. Even after upgrade and re- install.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also try:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Macbookpro 5.1 SSD and RAM

I have a MacBookPro 5.1 and would like to change the disk to ssd and increase the ram. What is the maximum ram can i put and which disk ssd and ram ideal?
2.4 Ghz Intel Core 2 Duo
2GB 1067 MHz DDR3
The ram has to be 1067MHz or can be 1066 or 1333?
Thank you.

You can install up to 8GB of RAM - make certain that it is the correct RAM - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMMs. I would suggest either OWC or Crucial for good Mac RAM.
As for an SSD, most available now are 6.0 Gbps (SATA III) and your machine only has a 3.0 Gbps (SATA II) bus. Nonetheless, SATA III is backwards compatible with SATA II.
See my one and only user tip about upgrading to an SSD -> https://discussions.apple.com/docs/DOC-4741.
Good luck,
Clinton

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Problems before and after Uninstall and re-install CS4

I went ahead and uninstalled and re-installed CS4 because of freeze ups and other difficulties. Program After Effects is now crashing - see attachment. There is also a problem with an importer plugin (I think) may be related. I can't tell. I have not tried any other projects. I did however, disconnect the Matrox MX02 Mini, but still had problems. The MX02 is now re-connected.
I wonder if installing CS4 on top of CS3 is an issue? I remember having a similar problem goiing from CS2 to CS3. I had to downloader a cleaning utility from Adobe (I think) to remove every bit of CS2 and then run CCleaner.
It's my own fault - trying to upgrade software and hardware at the same time. It's hard to isolate. For now, I'l just have to do with Premiere since it is working. But, I'd sure like to know what's going on.

Did you re-install all other Adobe products as well? If not, then that may be the problem. Uninstalling/ reinstalling only one of them messes with MediaCore and certain otehr functions. The quick fix is to download the manuala (!) update packages for After Effects, Premiere Pro/Encore and Adobe Media Encoder from the support pages and run them. This usually bends things in place. If not, then you will probably have to uninstall again, this time including every Adobe app, use the CS4 Clean Script and reinstall.
Mylenium

Z580 Bios access problem after SDD and Win 10 install

Hi With Windows 10 looming I bought a new SSD to install onto.In the meantime I installed the existing win 8 until Win 10 was available, no problem there. When I installed Win 10 on the new SSD (clean install because Samsung migration doesnt work with Win 10) I cannot access the Bios via F2 I know there are a lot of threads on this and have gone through them (tried fn F2 boot up etc etc) but cannot get F2 backI have tried the Restart under Windows Recovery Settings and restart to change UEFI to no avail.Sometimes F12 doesnt work and can only get this back doing the restart under recovery settings Has there been a solution to this yet? I looked at the bios update but reports Rom equal or older than install (or something like) and so will not flash, presume up to date.

Sorry wrong forum

SSD and HDD Installed but it runs super slow? Please Help!

Hi, I have a late 2011 Macbook Pro 2.2 GHZ Intel Core i7
8gb of ram. My hard drive died in my mac and I decided to replace it with an SSD and installed an HDD in the optical bay following Ifixit instructions. I booted into internet recovery and installed Mountain Lion (as it would not let me do a straight Yosemite install from a flash drive I had made on my gf's macbook, because it couldn't authenticate). After booting up and declining the usual iCloud prompts, I rebooted and installed Yosemite from the USB. It took a while, but eventually i booted up.
I moved my home folder to the HDD a 7200rpm Western Digital Black, which is in the optical bay, (the SSD is a Samsung 340 Pro and is installed in the Drive bay). Everything appears to be functioning, but it's slower that it had ever been using Yosemite on the HDD that had died. It take 35-40 seconds just to open System Preferences. I have used First aid on both drives via the Recovery and repaired permissions on both. I have reset the ram using option-command-r-p. I have booted into Safe Mode and Restarted the computer multiple times. Just opening a second safari window causes the spinning wheel to go for ten seconds or so. If anyone knows anything I can do, please help! I'm at a loss as to what I can do to fix this.
I'm really not sure what is going on. It seems to take a very long time to load a website, but after using safari for a bit, the app doesn't seem to have a problem responding to commands, just takes way too long to load anything. System preferences is all of a sudden crazy snappy, but is giving me the spinning rainbow wheel when I try and click on a pane saying "Could not load Users & Groups preference pane." After I click "okay" and try again it loads right up. Grrr.

Etrecheck report if it helps:
Problem description:
Running super slow randomly with a newly installed SSD and HDD. Home Folder is on the HDD.
EtreCheck version: 2.0.7 (93)
Report generated October 29, 2014 at 4:58:33 PM EDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1680 x 1050
AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3:3:27
Disk Information: ℹ️
Samsung SSD 840 PRO Series disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
QuickSilver (disk2) / [Startup]: 510.88 GB (236.99 GB free)
Core Storage: disk0s2 511.25 GB Online
WDC WD7500BPKX-22HPJT0 disk1 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Hulk (disk1s2) /Volumes/Hulk : 749.81 GB (685.87 GB free)
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
Alfred 2 Application (/Applications/Alfred 2.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
QuickSilver: Disk size: 510.88 GB Disk used: 273.89 GB
Destinations:
Herbert [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 273.89 GB X 3)
Top Processes by CPU: ℹ️
      48% WindowServer
      11% Safari
      3% hidd
      0% fontd
      0% AppleSpell
Top Processes by Memory: ℹ️
249 MB Safari
241 MB installd
163 MB Finder
155 MB mds_stores
155 MB DesktopServicesHelper
Virtual Memory Information: ℹ️
1.52 GB Free RAM
3.89 GB Active RAM
1.82 GB Inactive RAM
1.34 GB Wired RAM
3.25 GB Page-ins
143 KB Page-outs

Logic Pro slow after SSD and mountain lion update.

1 week ago i was mixing a project of 90 tracks, and every run really well, no "system overloads" at all.
Sometimes the 320gb 5400rpm HDD give away a message that it was running a little slow and had a hard time dealing with all the 90 tracks, but it still work'd well.
3 days ago i installed a new samsung 830 256GB SSD and updated from lion to mountain lion and wow!
Everything is really fast, except logic pro.
Im now running a project with only 35 audio tracks with EQ,compressor and 2 busses with reverb.
It should work fine, SSD with 2,3 dualcore i5 cpu and 8gb ram but no, i am only able to play a quarter of a secound before i get the anoying "system overload" message....
Does somebody know what could be wrong? Mixing is my job soo this is a real problem for me.
Thanks!

Are you getting sudden motion sensor related stops? It may be best to tern your SMS off, as there is no need for SMS in a drive with no moving parts.
They would look like the error here
https://discussions.apple.com/thread/3806031?start=0&tstart=0
if there is no mention of the SMS I wouldn't bother although, no harm would be done if you did anyway.
You disable SMS by doing the following:
Launch Terminal
Type the following at the command line: sudo pmset -a sms 0
Hit return and enter your password

T450s SSD and RAM Upgrade Wont Work

Hey guys, I have a T450s and tried to upgrade the memory from the stock onboard 4gb to a total of 12gb, I disabled the internal battery and seated the RAM. When I went to turn the machine on though, the keyboard lit up as if it were going to start, but then it just gave me a black screen, no chance to enter the bios or anything. When I take the RAM stick out though the machine boots fine.
Now this is my second problem and probably the bigger one. I also tried to install an SSD because my system just has the 500gb hard drive. I had a Samsung 840 Evo, and when I put that in the system didnt recognize it it at all, the bios only showed the 16gb sandisk that was already in the system. I took the SSD out and reinstalled the HDD, but now that isn't showing up in the bios either, so the only working storage I have is the 16gb ssd in the system. Can anyone help me out with this mess?
Here's the RAM I bought:
http://www.amazon.com/gp/product/B006YG8X9Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit: I also tried my SSD and the HDD in my desktop and both work fine.

Hi nickoarg,
I'm not disputing your experience at all. However, SSDs get installed in ThinkPads all the time, and legacy mode just isn't necessary to get them to show up.
More likely it's some kind of incompatibility that's masked by legacy mode. Or just random coincidence...
I've noticed with several of my SSD installs (Crucial, mostly) that the drives are invisible until they finish some kind of internal housekeeping. In fact that just happened with the T450s and a CrucialM500. First it didn't show up in the boot menu, then threw a 2100 error, then showed up and is behaving fine just now.
Again, I believe what you're saying about your situation but it should not be necessary to use legacy mode for an SSD.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can i clone my macbook air HDD into an SSD and then install that on a macbook pro??

i Have a macbook air 2013 with mavericks and my brother has a 2012 macbook pro with yosemite, i want to keep mavericks, can i clone my air's HDD into an SSD and install that SSD into the pro??

Yes, although your MBA does not have an HDD. It has an SSD. Just put the new SSD into a dock or enclosure, clone your drive to it, then install the new SSD into the MBP.
Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external SSD. Source means the internal startup drive.

Java option icon not displaying AND Java not working, even after deleting and re-installing Java

Hi, I have uninstalled and re-installed Java. When I look at Add-ons, it shows Java Platform SE7 U17 10.17.2.2 and Java deployment Toolkit 7.0.17… 10.17.2.2 enabled. But it is not working – and I do not see the Firefox plugin to allow occasional use of Java.
One useful thread which discusses several difficulties in detail is
https://support.mozilla.org/en-US/questions/944956?esab=a&as=aaq
I tried to follow scrumpyjoe’s advice in this thread:
“This fixed it for me (32 bit windows) after installing Version 7 Update 10, but not seeing the plugin:
1) start regedit
2) navigate to HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins
3) right click, add New Key, name: @java.com/JavaPlugin,version=10.xx.xx
4) click on it, then right click and add new string value, name: path
5) right click, Modify, change value data to: C:\Program Files\Java\jre7\bin\plugin2\npjp2.dll [check if this is the right dll for your setup]
6) exit regedit
7) start FF”
- but (unless I have made a mistake) it has not resolved my problem.
What can I try next, please ?
Background:
Asus NX90jq
Intel core I7
700GB free disk space
16384Mbytes memory
O/S: Windows 7 Ultimate, 64-bit
UPDATE 2apr13
I have now unistalled and re-installed Firefox 20.0. restored preferences etc. using MozBackup, and Java Platform and Java Toolkit10.17.2.2. both show as working Add-ons - BUT STILL NO JAVA AND STILL NO RED ICON IN TOOLBAR. What is going on, please ?

I don't understand any of these replies. How do I get Java to run for Pogo.com? I had no problems a week ago. I do not have the red icon. I am not a programer so keep it simple. I am a 59 year old speech therapist.
[email protected] HELLLLLLP

After updating to Firefox 3.6.15, Firefox will not connect to the Internet, even after uninstalling and re-installing Firefox in my Windows XP environment.

After downloading the Firefox 3.6.15 update, my problems began. Firefox would not connect to the Internet. When I rebooted my PC, Firefox said that it couldn't access any Web sites. I uninstalled Firefox, then downloaded and installed Firefox 3.6.15. I still have the same problem: Firefox will not connect to the Internet. I am running Windows XP, service pack 3. I never had problems with Firefox until I installed version 3.6.15.

I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

Problems after SSD and RAM install

Similar Messages

Maybe you are looking for