Problems after updating to version 4

I updated to version 4 today using iTunes as instructed. Everything went well but when I went into my music app to play all songs nothing is listed. However, songs are still listed by going into albums or artists. I deleted all tracks from iTunes library on my lap top to save memory after loading onto ipod. I like to use the shuffle option when play my music so does anybody have any idea how I can get my song list back.
Also when I go into my settings it shows I have 0 songs.
Can I restore back to original version without loosing everything completely?

I Went into iTunes, with my iPod connected to my laptop, to check the settings for music on my iPod. I noticed that albums and artist was ticked but song name wasn't. When I ticked the box my song list immediately appeared on my iPod. Was as easy as that. So before panicing and think this upgrade is pants-like I did- I suggest those of you who have problems go into your iTunes and really hav a good look through the settings. It may be that a little box somewhere is not ticked.

Similar Messages

  • Problem After Update Kernel Version.

    I have Problem after update my Xperia Z kernel version. When I upload or share some photos using "Xperia For Facebook" it is start to upload and finish without any problem. But the problem is i Can't see those photos in my Facebook Account .
    pls help me.

    *Moved to Android development*
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problems after updating to version 1.2

    Hello,
    after I've updated my 5th generation video iPod to version 1.2 with iTunes 7.0 the iPod now crashes constantly after 15 to 25 minuetes of music playback and only there. It doesn't crash on videos or while playing the new games (texas hold'em and vortex).
    The crashes expresses oneselves in freezing the GUI. But the current played song plays to the end and then stops. The next song wouldn't be played.
    Is this a hardware failure and an issue for AppleCare (the iPod was buyed in dec 2005) or should I reset it to factory defaults?
    iPod Video 30GB black (german)   Mac OS X (10.4.7)  

    Aperture 2.1.4 has no longer been updated by Apple since the release of MacOS X 10.7. Thelast system it worked well with, was MacOS X 10.6.8.  SInce then, there are problems with incompatibilities. Upgrade to Aperture 3.5.1, if you want to use Aperture with Mavericks.
    Only, with only 2GB of memory, Aperture 3 will be able to run, but not be very responsive. Is it possible, to upgrade the RAM in your iMac to 4GB?

  • Problems after updating to version 7.2.0.35: can't open iTunes

    After downloading the newest version, I was able to sync my iPod with my computer one time. But the next time, I'm unable to open iTunes on my computer. I keep getting a message that says "the folder iTunes cannot be found and is required." I uninstalled iTunes, restarted, reinstalled and keep getting this error message. I would try to reload my library but since I can't even open iTunes I'm not sure how to proceed.
    Also: all my songs are still on my iPod. Is there a way to simply start over and reload all those songs back onto my iTunes library? (I would try to do that, but like I say, I can't even open iTunes.)
    Dell Windows XP

    Thanks for the tip. I've never used the System Restore function before, and when I found it and used the System Restore wizard, I don't seem to have any restore points available. Is this odd? Should this function have been something I turned on manually?

  • I have a problem my blackberry z10 after update os version 10.3.1.1779

    I have a problem After update os version 10.2 to 10.3.1.1779  in my BlackBerry z10 .I lost my whole data after phone switch off  and all setting are reset. Please anyone help me to resolve this issue. 

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:Article ID: KB36747 All data is deleted following a manual restart of the BlackBerry 10 smartphone and a blue LED is displayed during boot upHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you. If it does not apply, then the next recommended action is for you to do an OS reload via LINK.
    Good luck and let us know!

  • I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

    i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

    Hi all
    Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
    In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
    Just this week collected the replacement and tested that the replaced adapter works !
    So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use !   I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
    Closing this chapter of mine finally.

  • HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix))

    my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix)

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • Flash player problem after updating to belle on my...

    flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz  help or tell me the way to downgrade to anna
    Attachments:
    scr000002.jpg ‏10 KB

    1) product code  059B7W0
    2) software version 111.030.0609
    3) it is actually stored .flv files on my phone  workes fine on symbian anna
    Attachments:
    Scr000003.jpg ‏17 KB
    Scr000004.jpg ‏15 KB

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

  • FF doesn't start after update to version 27.0.1

    FF doesn't start after update to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

  • Nano quit working after update to version 1.2

    Brand new nano quit working after update to version 1.2 It worked fine before. My computer see usb storage device but doesn't recognise ipod. ipod updater that worked to let me update doesnt regonise nano either. I returned to store where I bought it, got a new one, brought it home, ran updater again now it the new one is doing the same thing. What gives? I have never had a problem in the past with updater. Is there any way to take it back to version 1.1 since 1.2 doesn't work?

    This fix came from Caspar (Thank you SOOO much!). It took me 10 minutes to do this and now my beloved ipod nano is back! Hopefully this will help some of you:
    Original Problem: Updated iTunes(6.0.5) and iPod nano (1.2). After the update, iTunes would not recognize my iPod and therefore would not let me remove the iPod from my computer, which seems to be the problem most people are having.
    The Fix:
    *uninstall iTunes, iPod, and any updates (make sure anything related to these two programs are not on your computer)
    *Open Control Panel
    *Click the "switch to classic view" link, if
    necessary
    *Double click "administrative tools"
    *Double click "computer management"
    *Under "storage" click on "disk management"
    *Find your iPod's listing
    *Right-click on it and click "format"
    *Select "FAT32" and start the format
    *After reformatting, remove iPod from computer
    *Download iTunes directly from the Apple website (I didn't restart my computer at the prompt)
    *Download 6/28/06 update for iPod (do NOT plug iPod in before doing this!)
    *Open update for iPod and wait until prompt to plug iPod in (do not plug in early)
    *Wait for the update....and there ya have it!!
    Hopefully this will help some people, as I have spent the past 2 weeks doing the 5R's thing. After completing the steps above, I haven't had a problem with my iPod..and now my Nike+ works!! Thanks again, Caspar...you're a genius!!
    p.s. if this helps, please repost this message to others who have the same problem as we do...

  • Mythbackend problem after update

    I am facing the following problem after updating mythtv.
    The installed packages are:
    sip03ds ~ $ sudo yaourt -Ss mythtv | grep installed
    extra/mythmusic 0.21-3 [installed] (mythtv-extras)
    extra/mythtv 0.22-3 [installed] (pvr)
    extra/mythvideo 0.21-2 [installed] (mythtv-extras)
    extra/nuvexport 20090413-1 [installed]
    after updating mythtv the backend refuses to start. Even though is displays that it is starting normally:
    sip03ds ~ $ sudo /etc/rc.d/mythbackend start
    :: Starting MythTV Backend [DONE]
    sip03ds ~ $
    for some reason it shows that the backend is unavailable.
    sip03ds ~ $ mythfrontend
    2009-11-21 10:32:59.615 mythfrontend version: tags/release-0-22 [0.22] www.mythtv.org
    2009-11-21 10:32:59.668 Using runtime prefix = /usr
    2009-11-21 10:32:59.668 Using configuration directory = /home/sip03ds/.mythtv
    2009-11-21 10:33:00.548 Empty LocalHostName.
    2009-11-21 10:33:00.549 Using localhost value of htpc
    2009-11-21 10:33:00.570 New DB connection, total: 1
    2009-11-21 10:33:00.587 Connected to database 'mythconverg' at host: htpc
    2009-11-21 10:33:00.588 Could not open settings file /home/sip03ds/.mythtv/config.xml for writing
    2009-11-21 10:33:00.588 Closing DB connection named 'DBManager0'
    2009-11-21 10:33:00.631 ScreenSaverX11Private: Gnome screen saver support enabled
    2009-11-21 10:33:00.667 DPMS is active.
    2009-11-21 10:33:00.710 Primary screen: 0.
    2009-11-21 10:33:00.719 Connected to database 'mythconverg' at host: htpc
    2009-11-21 10:33:00.723 Using screen 0, 1280x800 at 0,0
    2009-11-21 10:33:00.823 MythUI Image Cache size set to 20971520 bytes
    2009-11-21 10:33:00.824 Enabled verbose msgs: important general
    2009-11-21 10:33:00.889 Starting mythlcdserver
    QWidget: Cannot create a QWidget when no GUI is being used
    2009-11-21 10:33:01.408 Connecting to lcd server: localhost:6545 (try 1 of 10)
    2009-11-21 10:33:01.911 Connecting to lcd server: localhost:6545 (try 2 of 10)
    2009-11-21 10:33:02.412 Connecting to lcd server: localhost:6545 (try 3 of 10)
    2009-11-21 10:33:02.913 Connecting to lcd server: localhost:6545 (try 4 of 10)
    2009-11-21 10:33:03.414 Connecting to lcd server: localhost:6545 (try 5 of 10)
    2009-11-21 10:33:03.915 Connecting to lcd server: localhost:6545 (try 6 of 10)
    2009-11-21 10:33:04.416 Connecting to lcd server: localhost:6545 (try 7 of 10)
    2009-11-21 10:33:04.917 Connecting to lcd server: localhost:6545 (try 8 of 10)
    2009-11-21 10:33:05.417 Connecting to lcd server: localhost:6545 (try 9 of 10)
    2009-11-21 10:33:05.918 Connecting to lcd server: localhost:6545 (try 10 of 10)
    2009-11-21 10:33:06.471 Primary screen: 0.
    2009-11-21 10:33:06.473 Using screen 0, 1280x800 at 0,0
    2009-11-21 10:33:06.475 Using theme base resolution of 800x600
    2009-11-21 10:33:06.500 LIRC, Error: Failed to connect to Unix socket '/var/run/lirc/lircd'
    eno: No such file or directory (2)
    2009-11-21 10:33:06.500 JoystickMenuThread Error: Joystick disabled - Failed to read /home/sip03ds/.mythtv/joystickmenurc
    2009-11-21 10:33:08.531 Using the Qt painter
    2009-11-21 10:33:08.535 Removing stale cache dir: /home/sip03ds/.mythtv/themecache/MythCenter-wide.1280.800
    2009-11-21 10:33:08.557 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml
    2009-11-21 10:33:08.891 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
    2009-11-21 10:33:08.897 New DB connection, total: 2
    2009-11-21 10:33:08.897 New DB connection, total: 3
    2009-11-21 10:33:08.902 New DB connection, total: 4
    2009-11-21 10:33:08.906 Current MythTV Schema Version (DBSchemaVer): 1244
    2009-11-21 10:33:08.910 Connected to database 'mythconverg' at host: htpc
    2009-11-21 10:33:08.926 Connected to database 'mythconverg' at host: htpc
    2009-11-21 10:33:08.927 Connected to database 'mythconverg' at host: htpc
    2009-11-21 10:33:09.589 Desktop video mode: 1280x800 59.9125 Hz
    2009-11-21 10:33:10.602 Registering Internal as a media playback plugin.
    2009-11-21 10:33:10.958 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythmusic.so: undefined symbol: _ZNK15ComboBoxSetting9classNameEv
    2009-11-21 10:33:10.958 Unable to initialize plugin 'mythmusic'.
    2009-11-21 10:33:11.230 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythvideo.so: undefined symbol: _ZNK7Setting9classNameEv
    2009-11-21 10:33:11.230 Unable to initialize plugin 'mythvideo'.
    2009-11-21 10:33:11.248 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
    eno: No such file or directory (2)
    2009-11-21 10:33:11.259 MMUnix::AddDevice() Error: failed to stat /dev/power,
    eno: No such file or directory (2)
    2009-11-21 10:33:11.271 Loading window theme from /usr/share/mythtv/themes/MythCenter/menu-ui.xml
    2009-11-21 10:33:11.377 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
    2009-11-21 10:33:11.381 Found mainmenu.xml for theme 'MythCenter'
    Any ideas or logs where to check would be more that appreciated.
    Thanks
    Last edited by sip03ds (2009-11-21 09:40:36)

    I removed all the plugins and reinstalled mythtv. Configured it as advised on the wiki (without dropping the database schema) but the server is still not starting up correctly.
    I found out that the server is starting and and stopping when I run:
    sudo /etc/rc.d/mythbackend start
    when I start the front end, the front end cannot connect to the back end because it is unavailable.
    in case I start the server manually:
    sudo mythbackend
    I am able to connect via mythfrontend and mythtv is working correctly. Any suggestions to change the daemon script ?
    Last edited by sip03ds (2009-11-21 22:56:51)

  • Bluetooth problem after update to lollipop

    Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've  observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected .   PLEASE HEEELP !  

    Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
    - Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

  • Nothing works after updating to version 15

    After updating to version 15 nothing will load. I can't open any webpage or even connect to my router via Firefox.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "Continue in Safe Mode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Maybe you are looking for