Problems after upgarde to flash 11.3

Hi,
I have a flex application that has always worked fine for me, however i recently upgraded to version 11.3 of flash player.
This has created some problems that I hope someone can help me with.
I sometimes(its very eratic) get the following error:
Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://127.0.0.1:8080/cm-ear-cm-ria/RiaUserWorkspaceControllerFacade?wsdl)
I am using Flex 4, and I get this error on all browsers, i tested it on IE, Firefox, Chrome and even Opera. It comes and goes, so I dont really know what is causing it.
If anyone has encountered this issue before or knows what is wrong, please help.
Thanks Faizal

Hi. Welcome to the Mac support forum. I haven't experienced this problem myself so I think this is probably a personal problem.
I would start out with all the generic troubleshooting tricks. These seem to help in many cases.
Open disk utility, select your HD and choose repair permissions. When this is completed, shut down the computer. Remove the battery and hold down the power button for 10 seconds. reinstall battery and restart the computer while holding Command-Option-P-R.After you hear the startup chime 3 times, release the keys and allow the computer to complete starting.
See if this fixes any problems that you have. These generic fixes have helped fix an assortment of problems but sometimes they do nothing at all. But they're a good first step with almost any problem.
Good luck, hope this helps.
Jon

Similar Messages

Problem after installing the flash player

Hello
after installing the flash player i can't run some videos from different sites like facebook,
how can i fix it ?
Thank you

After the problem, I have quickly installed the latest graphic driver - but allways the same problem.
Before I have installed the flash player - the power settings - windows energy settings was "Turn off the display after ten minutes." It has always worked correctly.
After I have installed the flash player - the display was gone off - but never go on - I must restart my computer.
Now I must choose "Do never turn off the display". This problem I have since 2010. Until now I did not know why. Now I have reinstalled my computer and every day another programm installed. To see what it is.
This is my PC http://www8.hp.com/de/de/hp-search/search-results.html?ajaxpage=1#/page=1&/cc=de&/lang=de& /qt=WX139EA
(I have installed 6GB RAM)

Mac problems after I load Flash Player

After I download the latest version of Adobe Flash Player, so I can play my games on Pogo, Pogo still tells me that I need to update. WTH?

can you provide more information?
Which operating system are you using?
Which browser are you using?
Can you provide a link to the flash content you're trying to access?
Based on what you've said, you've already downloaded and installed the latest flash version. can you veify that the flash content loads on this page? What version does it say you have installed?

Problem after install Adobe Flash Player 10.1

Since I have installed the Adobe Flash Player 10.1 sometimes when this applications runs my browser simply freezes, I already try to re install but with no effect. I use the Opera 10.62 Browser. Can someone help me with this?

ld
i too am having problems ever since i updated to flash
10.1 i am running windows xp, internet explore 8 as wel
l as fire fox same problem in both i mainly am having this problem in you tube cant w
atch videos any more playback is slow lags and is choppy it starts stops every
other second

Lil problem after bios upgrade/flashing

I have a K9N neo nvidia nforce 550 mainboard and found a new bios upgrade from the msi website using the express download. Ever since ive upgraded, right after startup i get a message in windows saying it found a new PCI device and that i need to install a driver for it, i have 3 pci devices installed rbefore upgrading bios (GPU, Soundcard and wlan card) and theyre all working right now, i have no idea what pci device my pc has found because there is absolutely nothing installed other than those 3. ???
Any feedback would be much appreciated, thank you

Quote from: Ithiot on 05-March-07, 01:40:20
OK so i installed one of the drivers from the express download function, it was realtec audio device driver (or something), i installed that. but sstill wierd since i dont have that in any pci slot, anyways, im not getting the popup asking me to install unknown device anymore.
(AMD away driver wouldnt install for some reason, had an error, so i think im gonna leave it at that for now, i dont want any more problems lol...)
re install chipset drivers, after that if still yellow devices left use program above to ID.

I have a problem after upgarding the OS Yosemite and time machine. It says not enough space on external hard drive when I should write over older backups? thanks. late 2009 imac 3.06 8GBimac

Having upgraded to OS Yosemite, I find time machine says hard drive full so won't back up? and I can't access any back ups
Please help!
Thanks
Richard

Hey rgmhughes7,
Thanks for the question. After reviewing your post, it sounds like the Time Machine backup disk is full. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
OS X Yosemite: If your Time Machine backup disk runs out of space
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Hardware-Acceleration is no longer working after upgarding to Flash Player 10.3 (both Firefox 4 and

Sorry for coming to this place directly.
Becase the issues is painful for me.
I've fired a tracker on your Bug Tracking System as:
http://bugs.adobe.com/jira/browse/FP-7126
Please take a look.
The hardware acceleration (including Video Scaler, H264 and Stage Video) is not working any more.
The failure on hardware H264 decoding is one thing. It just cost more CPU and Battery Life.
But total failure on even Video Scaler is just too painful.

I'm experiencing this problem as well, and I don't have a solution, but I think I'm at least zeroing in on the cause. Running iTunes 10.2.1 on a Win7 PC, I noticed that Bonjour had stopped running in my list of services when the Remote app on my iPhone suddenly stopped working. I started the Bonjour service again and rebooted but iTunes would hang at the "Verifying Remote Passcode" message. I uninstalled Bonjour 2.0.2 and reinstalled an earlier version, but iTunes wouldn't even see my iPhone in the list of devices anymore. I updated Bonjour back to 2.0.2 and I can once again see the iPhone and put in the 4 digit code, but it still hangs at passcode verification.
I have fresh installations of the newest versions of iTunes, Remote, and Bonjour. Known remotes have been cleared and firewalls have been turned off. I'm inclined to think that the sudden stoppage of Bonjour as a service is related to the root cause of Remote and iTunes not pairing anymore. Maybe an update screwed something up?

Flash problem after software update (on 10.6.8)

I'm having flash problems on *some* macs after one of the recent software updates (june 2012).
On my school's 10 iMac's (2010), I can't play flash games anymore *in safari*. Chrome is ok.
An example site, is http://www.barryfunenglish.com/games.php (select any game)
But on my school's 6 MacBook Pro's, I can - both safari and chrome.
It was working 2 weeks ago on all computers.
I'm using Software Update server from our server to update all the macs, so it's possible there was an update problem.
Why is flash missing on the 10 imacs safari? But not on the macbook pros?

AppleJason wrote:
so did Apple uninstall flash on safari with it's latest update? do you know the reason?
Yes, it was blacklisted by Adobe for security vulnerabilities. OS X now checks to make certain you are running a safe version and disables it if you aren't.
With the latest update, you now have the option of having Adobe doing a "Silent Update" in the background without your having to do anything. I would recommend you implement it.

I am haveing problem watching video's after downloading adobe flash player

i am haveing problem watching video's after downloading adobe flash player, how can i make it working?

Video from where?
What happens when you try?

Flash player problem after updating to belle on my...

flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg ‏10 KB

1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg ‏17 KB
Scr000004.jpg ‏15 KB

Problem with BPS Reports after upgarding the system to BI.7

Dear Experts,
We are facing problem with the BPS Reports after upgarding the system to BI.7
In 3.5system the reports are dispalyingthe data.
we have copied the production system to X system and has migrated the same to BI.7.
in the X system the reports are not showing the data and even we generated the web interfaces in X system.
After giving the input to BPS Layout and when we go for output ,we are getting the message No Data has been found.
when we chekced the corresponding cube data was existing.
It would be a great help if any valuable suggestions to over come the problem.
Regards,
Sunil...

Dear Andrey,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code has not been maintained for the sales documnet 1296".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

Computer problems after upgrading to Mavericks

SO many problems. I cleared out a ton of old stuff that I saw might be causing problems, and I've verified and repaired the disc, and uninstalled and reinstalled a couple of programs that I was seeing problems with in the console, but now I'm just flummoxed. It's behaving better than it was earlier, and isn't giving me the beach ball nearly so often, but it still seems like it's taking too long for a lot of things. I just reinstalled Avast and am currently letting a game update through Steam. I have the console and the activity monitor open to one side. Since I opened the console, it's been spitting out one or two messages every second, and all I can find through some internet searching is that it's something to do with the wireless connection. There's some other stuff periodically mixed in that doesn't sound good either, involving either sandboxd or mdworker. But for the most part it's along these lines:
Nov 5 00:59:52 kate-lenthalls-macbook-pro kernel[0]: 1516.810543: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:53 kate-lenthalls-macbook-pro kernel[0]: 1517.811065: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:54 kate-lenthalls-macbook-pro kernel[0]: 1518.811534: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:55 kate-lenthalls-macbook-pro kernel[0]: 1519.811686: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:56 kate-lenthalls-macbook-pro kernel[0]: 1520.812774: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 23 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:58 kate-lenthalls-macbook-pro kernel[0]: com.avast.AvastFileShield Warning: Unable to retrieve file path. Skipping. [22]
Nov 5 01:00:27 --- last message repeated 208 times ---
Here's my report from EtreCheck:
Hardware Information:
          MacBook Pro (17-inch 2.4GHZ)
          MacBook Pro - model: MacBookPro3,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          GeForce 8600M GT     - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:30:19
Disk Information:
          ST9500420AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 413.49 GB (122.62 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 85.76 GB (28.21 GB free)
USB Information:
          Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.eltima.ElmediaPlayer.kext          (1.58)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
          com.avast.PacketForwarder          (1.3)
          com.avast.AvastFileShield          (2.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.eltima.ElmediaPlayer.daemon.plist
          [failed] com.google.GoogleML.plist
          [loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [not loaded] com.avast.home.userinit.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.markdouma.SourceFinaglerAgent.Portal.plist
          [loaded] com.valvesoftware.steamclean.plist
          [not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
          Flux
          smcFanControl
          GrowlHelperApp
          Google Notifier
          FreeMemory
          TrashMeHelper
          Cloud
          sidenote
          Temperature Monitor
          avast!
          Dropbox
          Alfred 2
          Activity Monitor
3rd Party Preference Panes:
          avast! Preferences
          PenTablet
          Flash Player
          GeekTool
          Growl
          MultiBrowser
          Shades Preferences
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: YES
          Auto backup: NO
          Time Machine not configured!
Top Processes by CPU:
              24%          Console
              10%          WindowServer
               9%          LotroLauncher
               2%          steam
               1%          EtreCheck
               1%          mds_stores
               1%          mds
               1%          com.avast.proxy
               1%          Activity Monitor
               0%          empdaemon
Top Processes by Memory:
          180 MB             steam
          156 MB             Safari
          152 MB             LotroLauncher
          150 MB             mdworker
          147 MB             mds_stores
          139 MB             com.apple.IconServicesAgent
          70 MB              Dropbox
          70 MB              Console
          66 MB              com.apple.WebKit.WebContent
          61 MB              Finder
Virtual Memory Statistics:
          207 MB             Free RAM
          1.81 GB            Active RAM
          1.46 GB            Inactive RAM
          513 MB             Wired RAM
          2.39 GB            Page-ins
          3 MB               Page-outs

I just reinstalled Avast
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. It's worse than the imaginary "viruses" you were worried about when you installed it. Not only does it fail to protect you, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
Back up all data, then remove "Avast" according to the developer's instructions. Reboot.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and follow the instructions linked above.
If you still have problems after following those instructions, post again.

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Problems after upgarde to flash 11.3

Similar Messages

Maybe you are looking for