Problems already with 11g install
I was trying to install the 11g and ran into issues already.
I am not able to start my opmn at all. As a result all of my system components are down. My admin weblogic server and managed server and the node manager is fine.
But OPMN is not starting at all. I tried through the windows services as well as the command line but all i get "opmn failed to start"
I had issues during install as well. Couple of cluster configuration failed and I guess that would be causing the issues.
Error that i got during configuration after install
“Executing: opmnctl start coreapplication_obiccs1″ configuration task failed.
When i checked the inventory and diagnostic logs of the opmn, All i see is
“Ping failed in Ready callback for proc:(658182365:5396) [No addresses for the request.]”
I am kind of stuck here.. Has any one had this issue..
Please advice (I am installing on 64 bit Windows Server 2003 R2 enterprise endition )
Thanks
Prash
Yes as I mentioned earlier I did start it from command line as well as windows service and none of them seems to be working.
Does any else encountered this issue during the instal?
Thanks
Prash
Edited by: Prash11 on Aug 31, 2010 2:19 PM
Similar Messages
-
Help with 11g install - corrupt file "filegroup15.jar" (Windows 32bit)
Hi, I'm having problems installing 11g. I've downloaded the .zip file a thousand times, and each time I get a CRC problem on the following file in the .zip:
database\stage\Components\oracle.ctx\11.1.0.6.0\1\DataFiles\filegroup15.jar bad CRC df37af05 (should be 38b64725)
I don't see anyone else complaining about the problem, so it must be something on my side, but not sure what. I've downloaded multiple times, on multiple computers, both with and without a download manager. Any suggestions on how to get around this (the file is over 140 Mb or I'd ask that someone simply email it to me...)
Thanks in advance for any ideas!
ScottSorry I wasn't clear, the corrupted file filegroup15.jar is the one that's 140 Mb in size.
Looking under Windows, I see the following filesize info for the entire .zip:
Size: 1.73 Gb (1,868,327,005 bytes)
Size on Disk: 1.73 Gb (1,868,328,960 bytes)
Does that match what you have?
Thanks,
Scott -
I would like to ONLY buy Lightroom, but it seems like there is some problems with this option. Or is it not an option anymore? (I already have photoshop installed)
Photo editor app | Download free Adobe Photoshop Lightroom 5 trial
At the above link go down to the bottom of the page right hand side. There is a button to purchase the Lightroom Perpetual License. -
Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
Hesham.Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact -
Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks
Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free. -
Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN -
Installing 10.1.3.1 (want to upgrade to 10.1.3.4) with 11g Database
I want to install SOA Suite 10.1.3.4 on a new laptop I have. I have ins
I checked the certification matrix and saw that SOA Suite was certified with 11.0.6 version of the Database so I installed the 11g database no problem and went to install the SOA SUite 10.1.3.1 last night (would then patch up to 10.1.3.4 afterwards).
I choose Advanced Install, as I want to put the schemas in my 11g database but when I put in my connection details for the DB a window pops up saying that it must be installed on the correct version of the DB, it lists a load of them but 11g is not one of them (10.2 series was the highest).
So 10.1.3.4 is certified with 11g but you can do the base install on 11g, Is this correct?
Are there any workarounds?
I assume one option is to do a Standard Install where it creates the XE database, then patch up to 10.1.3.4.
Then some how point everthing to my 11g DB afterwards.
Any ideas?
Stuartjust found the solution. One needs to follow patch instructions 6265268 even before starting installation to replace the relevant jar files in the installable.
Also, refer to metalink note 605489.1 -
Problem with J2sdk instalation
Hi!
I'm a java begginer. (I started 1 hour ago! )
After installing j2sdk, some applets stop working (e.g some applets in java.sun.com ) , i.e they return the message "java.lang.ClassNotFoundException" (something like this).
I'm working in NT environment, with a Pentium 200 MGHZ MMX, and IE 5.5. I have already try to install javabeans, and flash 5.0 . When remove the j2sdk this problem disapears, and everything runs well.
I've also verified that java programs that use the Arrays class, in the compilation process, returns the error: "Can't resolve symbol Arrays.Sort"
^
Please help me, even if it sounds too stupid!
Greetings
Joao NoraHi, don't forget to check out your PATH and CLASSPATH, but I am sure you already have.
I think your problem is Arrays.Sort, it should be Arrays.sort ... hope this helps :-)
Good luck -
I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?
Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer. -
Install failure due to "faulty DVD" problem: only with Family Pack?
After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.
I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke -
I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays -
When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it
Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
== I DOWNLOADED UPDATE 3.6.8Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
Iv just bought Ipad 2 for back home in UK in usa. I'm trying to set it up for the plane ride home on my sisters pc which already has itunes installed. Will I be able to sync it with my own PC back home.
Yes, but all the data from your sisters PC will be erased and replaced with yours, which is probably what you want anyhow.
-
Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?
You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card
Maybe you are looking for
-
I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?
-
Where can i find a link to the older photoshop cs6 download version?
i have a valid product/serial number but have moved physical machines. i've uninstalled from the old one and just need to get an installation package to download to the new machine. i am looking for a link that doesn't automatically reroute me to the
-
EDI-- Idoc .. Steps needed... Using Seeburger .
Hi All, Iam doing a scenario for EDI file to Idoc scenario. My client asking me to use the AS2 adapter.Can you pls tell me whether the below steps are correct ?? EDI File ---> Idoc Scenario : AS2 SND adapter -- > File Rcv adapter -> File Sender adapt
-
I did all the steps to restore and reset my Apple TV now it's says activating
my apple tv is now saying activating for the last hour after being restored and reset thru my iTunes... What going on? It was working last nite...
-
Hi I am using Illustrator CS5. I received a logo from the customer with the logotype as vectors but a black drop shadow that had been rasterized, I am assuming , in Illustrator. When I print this logo on a coloured background to my Canon 5180 Image r