Problems App-v sequencing snagIT v11

Hi Guys,
I'm attempting to sequence SnagIt 11 with app-v 4.6 to deploy it to a Windows 7 PC using SCCM 2012. During sequencing when I attempt to launch snagIT I get an error "Unable to start snagpriv.exe" I have checked the net and have found a solution
- refer below. Apparently I need to add an "Envlist" entry to the OSD before I finish the sequencing package. I have done this during sequencing and also have tried to edit an existing package after sequencing but it doesn't fix the problem.
I believe the problem is because I get the error during the "run the application stage" of the sequencing process and before I add the entry to the OSD tab. Therefore, is there anyway I can launch the application, accept the error, add the entry
to the OSD tab and then somehow relaunch the application before I save/finalise the package?
Any assistance would be greatly appreciated.
Thanks.
Bryan.
http://www.itninja.com/question/snagit-11-on-windows-7-unable-to-start-snagpriv-exe
" It seems that there is an extra bit of code you can insert into the AppV OSD file to make Snagit work..."
< ENVLIST>
<ENVIRONMENT VARIABLE="__COMPAT_LAYER">RunAsInvoker</ENVIRONMENT>
< /ENVLIST>
- See more at: http://www.itninja.com/question/snagit-11-on-windows-7-unable-to-start-snagpriv-exe#sthash.tMGAGiW8.dpuf

Hi again, so I downloaden the 11.2 trail version and created a quick and dirty App-V package. I started the package during sequence and choose for the trail. I also for streaming and indeed recieved the error.
The sequenced also reports that there is a printerdriver installed, together with this error:
The Sequencer detected a DCOM subsystem. Application components that use DCOM will not work with App-V.
The DCOM subsystems detected are as follows:
SnagItET (AccessPermissionDllSurrogate)
I suppose the above error is related to the priveliged needed to start snagpriv.exe.
After that I did a little cleanup, I created the package. Deployed it to a machine and also received the error "Unable to start snagpriv.exe", so I modified the OSD file and added __COMPAT_LAYER env variable. Problem solved.
So what going wrong at with your package??

Similar Messages

How to sequence Snagit

Hi,
I am completely new to app-v but I have been thrown straight into a project to sequence a few applications. I have been learning as I go along. Is it possible for you to please give me a step by step guide in sequencing snagit v9.0 with some explanation
along the way. Thanks in anticipation.
Regards

Hello,
These are the top results of if you google for App-V snagit. Some describe the entire process (as you explicitely requested), others deal with minor tweaks necessary for a process that one could assume would apply to any best practice sequence attempt.
http://www.itninja.com/software/techsmith/snagit/10-369
http://social.technet.microsoft.com/Forums/en-US/f958358d-b879-4ff2-92bc-052c5396ff65/problems-appv-sequencing-snagit-v11?forum=mdopappv
http://www.richud.com/wiki/AppV_Recipes
For the benefit of others, perhaps you could share how you sequence it?
Nicke Källén | The Knack| Twitter:
@Znackattack

Camera problem app, its giving me this purple images then the app freezes i press home button its goes fine back home screen it just the CAMERA APP ITSELF. i did RESTORE

camera problem app, its giving me this purple images then the app freezes i press home button its goes fine back home screen it just the CAMERA APP ITSELF. i did RESTORE

I've found a new way .. I restart the phone manually. And it works. But sometimes , the Problem reappears and sometimes it doesn't . But when it does , its just too annoying. Therefore, restarting the phone manually is a temporary solution. But what's the permanent solution for it? Let's wait and hope that someone comes up with one.
And I hope this restarting hint solves your problem too.
P.S- instagram or any other app won't make a difference. That's what i think .. Cz I don't have that app on my iPhone.

Problem with creating sequence in procedure

I am getting the following error when trying to create a sequence inside a procedure:
ORA-01031: insufficient privileges
But, I have no problem creating the sequence outside the procedure, by just issuing the create sequence command.
How can I make this work?
Thanks.

I am getting different result for this:
INSERT INTO DEPNODE.SEQ_MEID (proc_id, me_id, seq_id)
SELECT 'tstamp' AS proc_id, M.MANAGED_ENTITY_ID AS ME_ID, ROW_NUMBER () OVER (ORDER BY M.MANAGED_ENTITY_ID) AS seq_id
FROM FDM.MANAGED_ENTITIES M, FDM.PHYSICAL_ADDRESSES P
WHERE M.MANAGED_ENTITY_ID = P.ME_MANAGED_ENTITY_ID
AND M.MANAGED_ENTITY_ID < 5;
If I ran this at the prompt, I get the correct result:
tstamp     1     1
tstamp     2     2
tstamp     3     3
tstamp     4     4
But, if its part of the procedure, I get this:
tstamp     1     1
tstamp     1     2
tstamp     1     3
tstamp     1     4
** the middle row is the seq_id
Thanks.

Problem in Sourcing sequence for plant in Sales Order.

Hi
I am facing problem in Sourcing sequence for plant in Sales Order.
If in Sales order i am selecting material then system is picking plant automaticly 8635 which is worng. For customer XYZ/ ship to ID ZXY, system should pick plant in sequence 5400 - 2300 - 5050.
Could you please confirm what is exactly problem and what seeting i need to check.
pls confirm

But it is defind for material master.
Because 8635 existed in materila master so system determines 8635 plant into your sales order.
You can set only one plant as automatic else you can enter manually in sales order.
If you automatic as 5400 then assign in Customer material info record or Customer or material master any where you can maintain.

App-V Sequencer crashes when package contains a specific executable

I'm trying to sequence an application that contains the following executable: https://dl.dropboxusercontent.com/u/172349/reg.exe
When I try to save the package at the last step, App-V Sequencer always crashes with a generic "Microsoft Application Virtualization Sequencer has stopped working" error.
I've narrowed down the crash to this single executable. To reproduce the crash all you'd have to do is attempt to sequence a package with this executable in the installation directory. No other files are needed.
I believe the executable is called upon by another exe for some kind of DRM/DVD check, but I'm not sure how relevant that is.
Would appreciate it if someone could take a look at why merely having this exe in the package causes the sequencer to crash. I'm using the latest App-V 5.0 SP2.
Thanks.

A quick update:
We got it to work using a script to copy the exe back into the package on execution, so I voted this solution as the answer.
However, this is a rather ugly workaround and the sequencer really shouldn't just crash inexplicably on any input, so I hope someone is still looking into why this is happening. FYI the HF4 sequencer also crashes on packages containing the same exe.

Incorrect behavior in App-V Sequencer if contains filename beginning with two dots ".."

I'm trying to sequence a package that has a file named "..a". (don't ask me why they named it this way...)
When trying to save this package, the App-V sequencer will say it has encountered an error and the package was not saved.
To reproduce, simply try creating a new package, and create a new empty file and rename it to "..a" (extension included). When you try to save the package, the error should pop up.
It looks like the leading double dot might be confusing the sequencer into somehow treating it as a file in the parent directory, because under the package editor it shows the file as having an empty name, and being outside of the AppVPackageRoot folder.

It is reproduced easily - but this is the first app that I have ever heard of that does this. You could possibly open a case with Microsoft.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Strange problem - app install failed randomly - OSD SCCM 2012 R2

Hi,
We have this problem for a few weeks and despite various test the problem persists. I hope the community can help me on this problem.
Problem : During TS New computer Win 7 x64 or X86 OSD, app failed to install randomly. Some example
: on the same model, morning OSD test, all app located on TS will be installed, then test the afternoon and no application is here. Sometimes, it works during 4 days and after doesn't work during 1 week / 2 day, it's very randomly. Problem is here for all
models.
Test made :
Add reboot step in TS just before install app > Not ok
Change deployment option app TS to : "Download content and run locally" > Not ok
Add following properties to the client agent in TS : SMSMP=SCCMSRV.domain.lan DNSSUFIX=Domain.lan > Not ok
Enable anonymous mode > Not ok
Informations :
App concerned : Adobe flash, google chrome etc...
Domain integration : OK
App installation tested across software center : OK
Account service for distribution app : OK
Some errors that i've notice :
Policy Evaluation failed, hr=0x80004005 (smsts.log)
Install application failed: 'Adobe Shockware Player'. Error Code 0x80004005 InstallApplication
(smsts.log)
Policy prevents failover to WINS for lookup (LocationServices.log)
Error sending HEAD request. HTTP code 401, status 'Unauthorized' (LocationServices.log)
No error in AppEnforce.log
Do you have an idea ? Thank you in advance.

Finally the pause Works and all app was installed after 8 test on different models.
For my case I following this order :
- 1 Before install app: Put a pause (3m) with this script
Set fso = CreateObject("Scripting.FileSystemObject")
Wscript.Sleep 180000
And this command line : %SYSTEMROOT%\System32\wscript.exe Pause_TS_3m.vbs
- 2 Then put a pause ( about 30s) before each app with a run command line ping :
cmd.exe /c "ping -n 30 localhost" > NUL
As Damon
A. Johns say "At the very least it can result in unreliable results."
Well I hope i'll find a reliable solution, thanks a lot all for help me it was a long time to test.
These topic help me :
http://social.technet.microsoft.com/Forums/en-US/221bcfe8-4c1e-4766-be5b-fbf54fe0e66c/specific-model-suddenly-fails-on-any-application-install-packages-work-fine?forum=configmanagerosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/17cc2c51-2769-4a43-b456-570373b24643/pausing-the-sccm-osd-task-sequence?forum=configmgrosd

EPM 11.1 Install Problems - Apps not in SS/Can't Log into Wkspce/Install ?

Hi all...
Was attempting to do an install w/ separate tablespaces in Oracle. Read install doc and saw this note
"To use a different database for each product, perform the “Configure Database” task separately for each product.
In some cases you might want to configure separate databases for products."
Guess I may have read it wrong but basically, tried running config for an entire app one at a time vs. just running the config database and then performing the remainder of the confg tasks for all apps. Validates okay (except Studio -- connection string doesn't seem to be working although looks okay in the .properties file -- but can fix that later), however now I have the following problems:
Planning, Reporting and Analysis apps are not showing up in Shared Services nor are there any roles associated with these apps so I can't provision a user for access.
Can't log into Workspace to see if my apps are are there -- tried using "admin" "password" but get error message "You must supply a valid user name and password to log onto the system". Which makes sense -- there are no roles for these apps and, therefore no users w/ access to these...
So, first question -- When Oracle says to run the Configure Database task separately for each product, does that mean I was supposed to select only this specific task for each product and then run the config for all products w/ the "configure database" deselected?
Next question -- Any way to force the app to register to Shared Services? The apps that are not showing in Shared Services do not have any apparent tasks for doing this and some only have a choice between configure database and deploy application server -- don't really want to chose either of these as would think it would get really, really messy (that is, would it deploy a second app server or update the current one?)
Trying to avoid uninstalling but that may be the only option. However, before I do that wanted to make sure I understood the Oracle note about "Configure Database" (see question above).
Any thoughts welcome.
KJ

So, John...
Good info on the the EPM Workspace issue. After installing the R&A Migration package, BI Plus and roles were available in Shared Services and I was able to log into Worksapce with both my previously non-working Admin/password account and a test user account. And, as an added bonus, the previous Oracle connection string error I was having w/ Essbase Studio disappeared!
Unfortunately, Planning and EPMA did not get a boost from that fix so, am currently in the process of uninstalling, which as you noted was not all the clean at all -- actually didn't see any difference after the uninstall from the install, and installing.
Install appears to be laying down the files (manually deleted the Hyperion directory...) okay. Will have to see how it goes from here. Think I will try the route of doing all the configure database tasks for all the apps first (to keep them in separate tablespaces and instances) and then doing the config for all the apps at one time.
BTW... Is there a "published" configuration sequence? I read the "Start here" and Install doc from cover to cover before starting the install and config and did not see any specific notes on the order of configuration... Just curious as I have seen several notes that allude to this being in the install doc. Am I just totally missing something?
KJ

App-V Sequencer and VBA

Trying to sequence Dynamics GP 10 on Server 2008 R2 x64 using App-V 4.6.20200. The actual application installs and sequences fine. But the company this is being implemented for has custom VBA forms and when i go to import the Forms through GP it complains
that it cannot initialize VBA. I also cannot launch the VB editor from GP while sequencing as well. It works when installing outside of the sequencer.
I noticed that the key : HKLM\SOFTWARE\Wow6432Node\Microsoft\VBA uses short names and i believe this to be the problem. I can't find any info on what to do to resolve this (aside from changing that registry value)

This is what is set in the Key:
[HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\VBA]
"Vbe6DllPath"="C:\PROGRA~2\COMMON~1\MICROS~1\VBA\VBA6\VBE6.DLL"
Here's the procmon xml output for the dynamics.exe when i try to do the module import during the monitoring phase of sequencing. Not sure what a lot of these keys are. But i'm going to check if they exist when the app is installed outside of the sequencer.
If you have any ideas feel free to let me know.
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:35.0333982 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:35.0337067 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.4512917 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.4515830 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.5923572 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.5926563 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.5933523 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.5936482 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNTDLG</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.5946522 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>QuerySecurityFile</Operation>
<Path>Q:\GreatPlains\GP\Dynamics.vba</Path>
<Result>BUFFER OVERFLOW</Result>
<Detail>Information: Owner, Group, DACL</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.5949772 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryKey</Operation>
<Path>HKLM</Path>
<Result>BUFFER OVERFLOW</Result>
<Detail>Query: Name, Length: 4</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6112547 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryKey</Operation>
<Path>HKLM</Path>
<Result>BUFFER OVERFLOW</Result>
<Detail>Query: Name, Length: 4</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6138137 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryKey</Operation>
<Path>HKLM</Path>
<Result>BUFFER OVERFLOW</Result>
<Detail>Query: Name, Length: 4</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6162052 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegOpenKey</Operation>
<Path>HKCU\Software\Classes\Wow6432Node\CLSID</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Read</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6162241 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegOpenKey</Operation>
<Path>HKCU\Software\Classes\Wow6432Node</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Query Value</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6162362 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegCreateKey</Operation>
<Path>4쀀</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Query Value</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6165015 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegOpenKey</Operation>
<Path>HKCU\Software\Classes\Wow6432Node\CLSID</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Read</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6165185 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegOpenKey</Operation>
<Path>HKCU\Software\Classes\Wow6432Node</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Query Value</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6165299 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegCreateKey</Operation>
<Path>4쀀</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Query Value</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6167507 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegOpenKey</Operation>
<Path>HKCU\Software\Microsoft\Dynamics GP\9.0\SQM</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Desired Access: Query Value, Enumerate Sub Keys</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6167725 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegOpenKey</Operation>
<Path>4쀀</Path>
<Result>NAME NOT FOUND</Result>
<Detail></Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6173722 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6177056 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6220819 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6223735 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6230773 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:37.6233780 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNTDLG</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:39.7817252 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:39.7820093 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNTDLG</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:39.9356765 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:39.9359438 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNTDLG</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:39.9368972 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:39.9372294 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:42.2785197 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\WindowsForms10.Window.8.app.0.33c0d9d</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>
<event>
<ProcessIndex>493</ProcessIndex>
<Time_of_Day>9:21:42.2788182 PM</Time_of_Day>
<Process_Name>Dynamics.exe</Process_Name>
<PID>1444</PID>
<Operation>RegQueryValue</Operation>
<Path>HKLM\Software\Wow6432Node\Microsoft\CTF\KnownClasses\TNT</Path>
<Result>NAME NOT FOUND</Result>
<Detail>Length: 0</Detail>
</event>

Safari 8 problem, App Store problem, Adobe creative cloud signing In

Hello All,
I would really appreciate if you could help me out solve the following problems in my iMac 3.4 GHz Intel core i7!
Safari:
I recently upgraded to OS X Yosemite version 10.10 and since that time, i am facing a lot of problems with Safari.. sometimes it's working correctly and other times it is (freezing, not responding and the wheel keeps turning until the force quitting) snapshot attached for freezing)
App Store:
The problem with App store, the App store fail to start and if opened the window is inactive and in grey color and and says Cannot Connect to App store (snapshot attached)
Adobe creative cloud
Whenever i have problems in my iMac, i face signing in problem with Adobe creative cloud.. The wheel keeps turning (snapshot attached)
Just to mention the steps i tried to solve these problems:
- Reinstalled the OS X Yosemite 3 times.
- Restart my computer constantly.
- Clear caches in Safari..
None of them worked permanently!
Any suggest from your side!
Thank you

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Problem with DB sequences - Annoying

Hi All,
I have a target table and for one of the columns (which is not null), I am using a Db sequence as the mapping (abc_seq.nextval). It is set to Target.
What happens is that sometimes when the interface runs, it runs without any issues..but sometimes, it simply cannot get a value for the sequence and hence tries to insert a NULL value and throws error.
The column XXXXX cannot be null
When I try to run the below in the DB, it works fine.
select abc_seq.nextval from dual;
This is very very annoying as when I think everything works fine, then this problem arises..Below are some of the ways that I am able to get rid of this problem so far...
1. Restart ODI application.
2. Open the interface again and then select : Execute on Target...
This issue is happening for almost all the interfaces created.
But these are not a permanent solution. Anyone can help me ?
I am using ver - 11.1.1.6
Edited by: 937825 on Jul 4, 2012 1:37 PM
Edited by: 937825 on Jul 4, 2012 1:37 PM

Hi,
how you implemented mapping for sequence, using native sequence or any another way...
Thanks,
H

App-V sequenced Office applications Doesn't open/recognize Office documents by default

Clients are using sequenced MS Office and everytime they want to open a save word doc for example they have to open it through opening a MS Word Document.
By default it doesn't show with a word icon neither. if not they shall open it through "open with" and selecting Application Virtualisation Client which would also bring up "Choose Application" each time they wanna open it.
is there any way you can open it and recognize with the right Office App Icon by default.
Many Thanks in advance.

If file types are not associated then there's either something wrong with the package or how it's been published.
App-V 4.6 will only provide the behaviour you've described. Fix the FTA issues to improve the user experience.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Problem using a sequence in a trigger

I am creating a table, sequence and trigger as below. When I insert into the table I get the error message
'ORA-04098: trigger 'SIMS2.BEF_INS_MATERIAL_COST' is invalid and failed re-validation'
I am using TOAD rather than SQL Plus to do all this. Any idea what is causing the problem?
create table material_costs
material_id NUMBER(8) not null,
material_desc VARCHAR2(50),
material_rate NUMBER(8,2)
tablespace sims2data;
create index material_costs_1
ON material_costs (material_id)
tablespace sims2index;
create sequence material_costs_seq
increment by 1
start with 1
nomaxvalue
nocycle
noorder
cache 100;
create or replace trigger bef_ins_material_cost
before insert
on material_costs
for each row
begin
if inserting then
select material_costs_seq.nextval into new.material_id
from dual;
end if;
end;

Some older versions of Oracle do not allow the direct assignment of a sequence to the column, so you could try
CREATE OR REPLACE TRIGGER bef_ins_material_cost
BEFORE INSERT ON material_costs
FOR EACH ROW
DECLARE
l_seqval NUMBER;
BEGIN
   SELECT material_costs_seq.nextval INTO l_seqval
   FROM dual;
   :NEW.material_id := l_seqval;
END; The TOAD editor does not require the :new syntax because new.material_id is, at least potentially, a valid construct, and can only be resolved at compile time by Oracle. Oracle will certainly complain about new.material_id not being declared.
HTH
John

Problem with binding sequences to attributes

Hello everyone.
[you may directly jump to the question at the bottom of this post and if you don't understand what the heck I'm asking, feel free to read the whole post ;)]
I wanted to crate a table node where several attributes are for rows only.
Because i want it to be a CustomNode, the table should be created dynamically (one should at least be able to define different amounts of rows and columns at the initialization).
My problem is a combination of "creating dynamically" and binding attributes.
To create an arbitrary amount of rows i use a "while(i < x) CustomNode{}" loop.
To store the value of an attribute for a row i use sequences. So during the loop i do the following:
someValue: bind sequenceValue[i]
After quite some frustration i finally discovered that all the attributes will be bound to sequenceValue[last value of i].
I don't find the right words right now, so here's some code to demonstrate the problem:
package javafxtestbench;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.text.Text;
import javafx.scene.text.Font;
import javafx.scene.CustomNode;
import javafx.scene.Node;
import javafx.scene.Group;
import javafx.scene.input.KeyEvent;
var t1 = [true, true, false];
Stage {
    title: "Application title"
    width: 250
    height: 500
    scene: Scene {
        content: [
            Text {
                font : Font {
                    size : 16
                x: 10
                y: 30
                content: "Application content"
            createFubar(),
function createFubar(): Group{
    var grp : Group = Group{
        content:[
            //this works
            /*b1{ blob: bind t1[0]}
            b1{ blob: bind t1[1]}
            b1{ blob: bind t1[2]}*/
            //this doesnt
            createSomeBs(),
        onKeyPressed: function( e: KeyEvent ):Void {
            println("=== KeyPressed ===");
            if (t1[2] == true) t1[2] = false
            else t1[2] = true;
            println("new sequence value: {t1}");
    grp.requestFocus();
    return grp;
function createSomeBs(): Node[]{
    var i = 0;
    var grp : Node[];
    while(i < 3){
        insert b1{
            blob: bind t1[i]
        }into grp;
        i++;
    println("Sequence @ startup: {t1}");
    return grp;
class b1 extends CustomNode{
    public var blob = true on replace{
                println("attribute value b1.blob: {blob}");
    override function create():Node{
        Group{
}As you can see i created a CustomNode (b1) and use two different methods to add it to the scene.
First method: i add b1 thee times to the scene and set the attribute
or
2nd method: i use a loop (its index to bind the corresponding sequence entries to the attributes)
finally i added a key listener, which changes the value of the last sequence value if an arbitrary key has been hit.
output for using the "this works" block (1st method) after pressing some keys:
=== KeyPressed ===
attribute value b1.blob: true
new sequence value: truetruetrue //contains {true, true, true}
=== KeyPressed ===
attribute value b1.blob: false
new sequence value: truetruefalse //contains {true, true, false}and here for the "this doesnt" (2nd method) part:
=== KeyPressed ===
attribute value b1.blob: false
attribute value b1.blob: false
attribute value b1.blob: false
new sequence value: truetruetrueSo even though all elements in the sequence say "true", the attribute values of all CustomNodes will keep saying "false".
Here it's due to the fact that "i" is in the end greater than the sequence (cause by the increment at the end of the loop).
In the end all attributes will be bound to the same entry. So messing around with the index, so it doesn't get beyond the sequence size, won't help.
So to finally bring this post to an end ;P, here's my question:
How do you create an arbitrary amount of Nodes containing attributes which are bound to a list entries?
Edited by: Mr._Moe on 08.09.2009 20:17

HI
May be you can fetch the data from the table with looping the table size and catching the
index of the elements . To be more clear .
1 . get the size of the table .
int leadSelection= wdcontext.node<TableName>.getLeadSelection();
    for (int i=0 ;i<n;i++)
      if(wdcontext.node<tablename>.isMultiselected(leadSelection))
        String name = wdcontext.node<tablename>.getelementatindex(leadSelection).getname();
         similarly fetch the size of the other elements from the table .
    and set to other RFC as
        ZClass abc = new ZClass();
         abc.setName(name);
wdcontext.node<NameName>.bind(abc);
and othere thing is when you use Abstract class you can insert only one element at a time .
or may be you may want to set the values direclty to the RFC
       AbstractList lst = new ZClass.ZClassList();
       ZClass cls = new ZClass();
        clas.setName(name)
lst.add(class);
wdcontext.currentRFcNameElement.modelObject.setName(lst);
and
execute the RFC .
murali

Problems App-v sequencing snagIT v11

Similar Messages

Maybe you are looking for