Problems applying patch 8.1.7.1.1

WE HAVE 2 SEPARATE INSTALLATIONS AS FOLLOWS:
1)
NT4 / DB 8.1.7.0 / iAS 1.0.2.0(portal 3.0.7) all under same machine
WE USE THIS SERVER FOR TESTING
2)
W2000 / DB 8.1.7.0 / iAS 1.0.2.2 (portal 3.0.9). db in one server, iAS in another server.
WE ARE PLANNING TO USE THESE SERVERS
FOR PRODUCTION.
WE WANTED TO APPLY PATCH 8.1.7.1.1 IN THE PRODUCTION ENVIRONMENT BUT WE DECIDED TO TRY IT FIRST IN THE TEST ENVIRONMENT.
WE STARTED THE INSTALLATION AND ALL WENT FINE UNTIL STEP 5 ,WHEN YOU NEED TO "CONNECT INTERNAL" AND RUN SOME SQL SCRIPTS (CATALOG.SQL, CATPROC.SQL, etc...)
WE COULD NOT CONNECT AS INTERNAL. THEREFORE, WE COULD NOT FINISH THE WHOLE PROCESS FOR THE PATCH INSTALLATION.
TO MY SURPRISE, THE DB AND THE PORTAL ARE STILL WORKING NORMALLY!! IS THIS REASONABLE?
CAN I RUN THE SQL SCRIPTS REQUIRED IN STEP 5 AS "SYS" USER INSTEAD OF "INTERNAL"?
TKS!!

TKS PHILIP!
IN ORDER TO CONNECT WITH "SYS" THEN THE DATABASE HAS TO BE UP AND RUNNING.
I DON'T REMEMBER THE INSTALLATION STEPS MENTIONING TO START THE DATABASE PRIOR TO RUN THE SQL SCRIPTS (UNDER "INTERNAL").
ANY ADVICES?

Similar Messages

Problems applying patch 6168363 to 11.1.0.6.0

I'm going to be installing Oracle Beehive and one of the pre req's is the patch 6168363. I installed a vanilla Oracle 11g DB, have already successfully applied patches 6708565 and 6750049 but 6168363 fails with the following. Anyone else been able to apply this patch or had a similar problem?
[oracle@beehive 6168363]$ opatch apply
Invoking OPatch 11.1.0.6.0
Oracle Interim Patch Installer version 11.1.0.6.0
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/db/11.1.0/db_1
Central Inventory : /oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.0
OUI version : 11.1.0.6.0
OUI location : /oracle/db/11.1.0/db_1/oui
Log file location : /oracle/db/11.1.0/db_1/cfgtoollogs/opatch/opatch2009-04-13_11-17-05AM.log
ApplySession applying interim patch '6168363' to OH '/oracle/db/11.1.0/db_1'
Running prerequisite checks...
OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/oracle/db/11.1.0/db_1')
Is the local system ready for patching? y
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '6168363' for restore. This might take a while...
Backing up files affected by the patch '6168363' for rollback. This might take a while...
Patching component oracle.rdbms, 11.1.0.6.0...
Updating archive file "/oracle/db/11.1.0/db_1/lib/libgeneric11.a" with "lib/libgeneric11.a/qcs2.o"
The following actions have failed:
Archive not applied /home/oracle/Desktop/beehive install/6168363/files/lib/libgeneric11.a/qcs2.o to /oracle/db/11.1.0/db_1/lib/libgeneric11.a... ''
Do you want to proceed? y
n
User Responded with: N
ApplySession failed: ApplySession failed in system modification phase... 'ApplySession::apply failed: Archive not applied /home/oracle/Desktop/beehive install/6168363/files/lib/libgeneric11.a/qcs2.o to /oracle/db/11.1.0/db_1/lib/libgeneric11.a... ''
OPatch will attempt to restore the system...
Restoring the Oracle Home...
Checking if OPatch needs to invoke 'make' to restore some binaries...
OPatch was able to restore your system. Look at log file and timestamp of each file to make sure your system is in the state prior to applying the patch.
The following warnings have occurred during OPatch execution:
1) OUI-67124:Archive not applied /home/oracle/Desktop/beehive install/6168363/files/lib/libgeneric11.a/qcs2.o to /oracle/db/11.1.0/db_1/lib/libgeneric11.a... ''
OPatch failed with error code 73
Edited by: Simon Thorpe on Apr 13, 2009 11:21 AM

Gah, I just figured this out. The path to my patch files contained a space! "beehive install" so i've removed the space, rerun opatch and it works. I'm amazed that modern operating systems are still struggling with "spaces"...

Problem applying patches on Sol10

I must be doing something guffy but can't figure out what...
I am trying to apply patch on Sol 10x86 box. patchadd is failing siliently with no indication on what might be the problem. I tried on two different machines with identical results. Any ideas on what might be the problem or how to debug it.
Thanks,
/Oleg
# patchadd -g 118344-07
Patches Validation...
Loading patches installed on the system...
Done.
Loading patches requested to install.
Done.
Checking patches requested to install.
Done.
Approved patches will be installed in this order:
118344-07
Checking installed patches...
Patchadd is terminating.

I am assuming you want to only apply this patch in a specific Zone? If that is the case you would want to use -G instead of -g as the option.
"Add patch(es) to packages in the current zone only. When used in the global zone, the patch is added to packages in the global zone only and is not propagated to pack-ages in any existing or yet-to-be-created non-global zone. When used in a non-global zone, the patch is added to packages in the non-global zone only."
DP

Problem applying patch 125547-02

I am attempting to patch a Solaris Sparc 10 06/06 system to the latest patches using the smpatch command. One of the patches that needs to be applied in patch 125547-02. However I am unable to install this patch as it has a dependency on patch 122660-10. I attempt to download and install patch 122660-10 using smpatch and I'm unable to do so (the patch cannot be found after issuing the "smpatch download -i 122660-10") command. Going to sunsolve.sun.com I am able to download a copy of patch 122660-10 however when I attempt to install it I am told it cannot be installed as patch number 124204-01 needs to be installed. Unfortunately I am unable to download or install this patch using either smpatch or logging into sunsolve. Has anyone encountered this problem before and been able to resolve it?
Needless to say I am very frustrated at the difficulty it takes to keep a Solaris system patched.

Thank you for your assistance. That was the patch I needed as I was able to install patch 125547-02. It's odd that sunsolve did not list patch 124204-01 at all on the site. Typically when a patch has been obsoleted it remains on sunsolve and a reference to the new patch is made. That was not the case for patch 124204-01. One other thing to note: I was unable to use smpatch to download and install patch 124204-04 as you suggested. I had to log on to sunsolve and download the patch and install it with patchadd.

Problem Applying Patch KB70009

Dear All,
I have installed Solution Manager 4.0 SR1. I have upgraded Support Package from 20 to 23 successfully.
Now I wish to apply BASIS Patch 70009. It asks for CRT i.e. SAPKITL417. I added the sam also in the queue. This CRT asks for SAPKW70009. I addeed that. Then when I checked the queue it asks for SAPKIPYJ79. I added that also
Now I started importing it.
It started normally but keeps on running in " Main Import" phase for more than 20 Hours. It is still running.
What could be the problem & how to get rid of this.
Pls revert ASAP as I need to take action accordingly.
Thanks
Jitendra Tayal

Duplicate Thread.

Problems applying patch for Jena adapter

I got errors when applying the patch to 11g (11.1.0.6) for the Jena Driver (from OTN). I executed each .sql/.plb file in the order stated by the patch instructions:
jenadrv_patch_ig.txt: Step-by-step instructions (new Oracle Database 11g installation). When I executed sdordfxb.plb I got the folowing:
SQL> @sdordfxb.plb
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY SDO_RDF:
LINE/COL ERROR
1243/5 PL/SQL: Statement ignored
1243/28 PLS-00302: component 'ANALYZE_MODEL' must be declared
1272/5 PL/SQL: Statement ignored
1272/28 PLS-00302: component 'ANALYZE_RULES_INDEX' must be declared
1298/5 PL/SQL: Statement ignored
1298/28 PLS-00302: component 'DELETE_MODEL_STATS' must be declared
1317/5 PL/SQL: Statement ignored
1317/28 PLS-00302: component 'DELETE_RULES_INDEX_STATS' must be declared
Synonym created.
Synonym created.
Grant succeeded.
After this the SDO_RDF package could not be found when making semantic API calls.
Any idea what I did wrong? I rolled back from the patch by re-executing the backed up (pre-patch) versions of the .sql and .plb files which successfully restored the SDO_RDF package but I still can't install the patch.
Thanks.

After trying to re-run the patch process I couldn't get catsem11i to run successfully. I have dropped my models, network, and removed the model data tables (that I originally created) containing SDO_RDF_TRIPLE data types so I'm not sure why I'm getting the error below. Any idea where else these dependenices could be or how to fully clean?
C:\app\skagels\product\11.1.0\db_2\md\admin>sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Thu May 8 14:51:46 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> @catsem11i.sql
install 11 RDF
check privileges
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Uninstall 10.2 RDF? => ?/rdbms/admin/nothing.sql
declare
ERROR at line 1:
ORA-20000: Cannot proceed. Dependencies for RDF 11 type SDO_RDF_TRIPLE[_S]
(count=6)
ORA-06512: at line 81
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\app\skagels\product\11.1.0\db_2\md\admin>

Problem applying patches...

All,
I'm trying to apply 6880880 to 10.2.0.4 running on a Windows 2003 box. I connect to Metalink and download the patch to the cache without issue but then when it comes to the checkTarget step it just sits there forever and nothing happens. It also isn't creating the directory %oracle_home%\EMSTagedPatches\6880880... I created a local account and made sure it had full control of the directory structure but still nothing... Any ideas?
Thanks,
Tony

The best idea is, do it manually. Download the patch directly from metalink and apply it according to the readme file. I don't trust in EM's patching facilities.
Werner

System problems after applying patches

Hi all,
I was patching our netweaver 2004s system and now I am not able to use any transaction anymore.
First I updated the Abapkernel and the SPAM itself. Then I started applying the Abap support packages. I had no problem applying patch level 7 and 8. When I imported patchlevel 9, the system did not respond anymore. Every time I tried to execute a transaction I got a shortdump.
Do you have any idea what could be the problem?
We restored the system and now I got a similar error already when updating SPAM.
Thanks & Regards
Cornelius

Hi,
Just try to run RSXMB_ACTIVATE_ICF_SERVICES program from SE38 and see whether it works or not.
---Satish

Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanks

Hi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen

Problems applying TP / R3trans patch to 700 unicode kernel

When trying to apply an updated TP and R3trans patch to our kernel with apyr3fix, I get errors. Here are the details from the TP run. If you have any ideas as to what might be the problem, please let me know. Thank you.
~TJ
I found a note reference the IGS and IFSNAME duplicates, but I'm getting this with TP and r3trans.
APYR3FIX SID(X60) SAVF(PATCHES/TP) SAVLIB(GEN700UOPT) KRNLIB(R3700U0146) GETSAVF(*NO)
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Ownership of object PCHX60 in QSYS type *LIB changed.
Library PCHX60 created.
Unpacking patch save file...
Ownership of object TPPCH in PCHX60 type *FILE changed.
2 objects restored from GEN700UOPT to PCHX60.
Applying Patch from PATCHES/TP *SAVF...
Library PCHX60 added to library list.
Not authorized to object X60OWNER in QSYS.
Ownership of object PCHX60HYB in QSYS type *LIB changed.
Library PCHX60HYB created.
Constraint was added.
1 constraint(s) added to file O4AFFILE.
Constraint was added.
1 constraint(s) added to file O4AFFILE.
File O4AFFILE in library PCHX60HYB restored.
1 objects restored from PCH700UOPT to PCHX60HYB.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Checking patch library R3700U0146 for consistency
Number of invalid records found: 0
Number of ILE objects missing: 0
Number of IFS blobs missing in archive file: 0
Number of IFSNAME duplicates found: 0
---> hybrid library PCHX60HYB is consistent - OK
Checking target library R3700U0146 for consistency
Number of invalid records found: 0
Number of ILE objects missing: 0
Number of IFS blobs missing in archive file: 0
Number of IFSNAME duplicates found: 2
---> hybrid library R3700U0146 is inconsistent - ERROR
Target library R3700U0146 is inconsistent.
Errors occurred in command.
Errors occurred in command.
Library PCHX60 removed from library list.
APYR3FIX: Patch installation failed (see joblog)
Errors occurred in command.
Errors occurred in command.

Hi,
Not authorized to object X60OWNER in QSYS
can you provide the job log.
try to Change RSTOBJ *CMD with EDTOBJAUT (i.e. WRKOBJ, option 2) and give *USE to R3OWNER.
if it's already authorized
then execute
FIXR3OWNS LIB(<krnlib>) OBJ(*ALL)
then execute APYR3FIX
also check following forum to apply patch on i5/OS
Kernel patch
also check following sap note if you apply tp patch higher then level 140
Note 1137680 - i5/OS: 700 tools no longer function after applying a patch
regards,
kaushal
Edited by: kaushal malavia on May 13, 2008 11:00 AM

Problems applying Grid Infrastructure patch 11.2.0.3.5 (Patch 15876003)

HI All,
I am attempting to apply the 11.2.0.3.5 patch to a grid infrastructure server and OPatch has not been able to copy a series of files from the patch directory to the grid home. A segment of the OPatch log is shown below:
2013-03-14 11:13:01: The apply patch output is Oracle Interim Patch Installer version 11.2.0.3.0
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle_grid/product/11.2.0.3/grid
Central Inventory : /opt/oracle/oraInventory
    from           : /oracle_grid/product/11.2.0.3/grid/oraInst.loc
OPatch version    : 11.2.0.3.0
OUI version       : 11.2.0.3.0
Log file location : /oracle_grid/product/11.2.0.3/grid/cfgtoollogs/opatch/opatch2013-03-14_11-12-56AM_1.log
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 15876003:
Copy Action: Source File "/oracle_grid/patches/15876003/files/bin/appvipcfg.pl" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'appvipcfg.pl' to '/oracle_grid/product/11.2.0.3/grid/bin/appvipcfg.pl'
Copy Action: Source File "/oracle_grid/patches/15876003/files/bin/oclumon.bin" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'oclumon.bin' to '/oracle_grid/product/11.2.0.3/grid/bin/oclumon.bin'
Copy Action: Source File "/oracle_grid/patches/15876003/files/bin/ologgerd" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'ologgerd' to '/oracle_grid/product/11.2.0.3/grid/bin/ologgerd'
Copy Action: Source File "/oracle_grid/patches/15876003/files/bin/osysmond.bin" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'osysmond.bin' to '/oracle_grid/product/11.2.0.3/grid/bin/osysmond.bin'
Copy Action: Source File "/oracle_grid/patches/15876003/files/crs/demo/coldfailover/act_db.pl" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'act_db.pl' to '/oracle_grid/product/11.2.0.3/grid/crs/demo/coldfailover/act_db.pl'
Copy Action: Source File "/oracle_grid/patches/15876003/files/crs/demo/coldfailover/act_listener.pl" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'act_listener.pl' to '/oracle_grid/product/11.2.0.3/grid/crs/demo/coldfailover/act_listener.pl'
Copy Action: Source File "/oracle_grid/patches/15876003/files/crs/demo/coldfailover/act_resgroup.pl" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'act_resgroup.pl' to '/oracle_grid/product/11.2.0.3/grid/crs/demo/coldfailover/act_resgroup.pl'
Copy Action: Source File "/oracle_grid/patches/15876003/files/crs/demo/demoActionScript" does not exists or is not readable
'oracle.crs, 11.2.0.3.0': Cannot copy file from 'demoActionScript' to '/oracle_grid/product/11.2.0.3/grid/crs/demo/demoActionScript'
UtilSession failed:
Prerequisite check "CheckApplicable" failed.
Log file location: /oracle_grid/product/11.2.0.3/grid/cfgtoollogs/opatch/opatch2013-03-14_11-12-56AM_1.log
OPatch failed with error code 73
2013-03-14 11:13:01: patch /oracle_grid/patches/15876003 apply failed for home /oracle_grid/product/11.2.0.3/gridI have listed out each of the source (and destination) files, and they all exist. Shown below is a sample of the source and destination files.
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/appvipcfg.pl
-rwxr-x--- 1 root root 9051 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/appvipcfg.pl
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/appvipcfg.pl
-rwxr-x--- 1 oracle oinstall 9051 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/appvipcfg.pl
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/oclumon.bin
-rwxr-x--- 1 root root 121036 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/oclumon.bin
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/oclumon.bin
-rwxr-x--- 1 root oinstall 121036 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/oclumon.bin
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/ologgerd
-rwxr-x--- 1 root root 129765 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/ologgerd
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/ologgerd
-rwxr-x--- 1 root oinstall 129765 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/ologgerd
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/osysmond.bin
-rwxr-x--- 1 root root 129988 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/osysmond.bin
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/osysmond.bin
-rwxr-x--- 1 root oinstall 129988 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/osysmond.bin
[root@aute3od014naboi OPatch]#As you can see, the files definitely exist, and are readable by root - who ran the opatch utility.
Does anybody have any idea why these errors would be reported?? Any help would be greatly appreciated. If I have not provided enough information, please let me know.
Thanks
Gavin

Hello,
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/appvipcfg.pl
-rwxr-x--- 1 root root 9051 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/appvipcfg.pl
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/appvipcfg.pl
-rwxr-x--- 1 oracle oinstall 9051 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/appvipcfg.pl
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/oclumon.bin
-rwxr-x--- 1 root root 121036 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/oclumon.bin
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/oclumon.bin
-rwxr-x--- 1 root oinstall 121036 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/oclumon.bin
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/ologgerd
-rwxr-x--- 1 root root 129765 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/ologgerd
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/ologgerd
-rwxr-x--- 1 root oinstall 129765 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/ologgerd
[root@aute3od014naboi OPatch]#
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/patches/15876003/files/bin/osysmond.bin
-rwxr-x--- 1 root root 129988 Jan 12 01:20 /oracle_grid/patches/15876003/files/bin/osysmond.bin
[root@aute3od014naboi OPatch]# ls -alrt /oracle_grid/product/11.2.0.3/grid/bin/osysmond.bin
-rwxr-x--- 1 root oinstall 129988 Apr 6 2012 /oracle_grid/product/11.2.0.3/grid/bin/osysmond.bin
[root@aute3od014naboi OPatch]#The owner of the Grid does not have permission on the directory where you have the patch ("/oracle_grid/patches"). Try providing appropriate permissions for the owner of the Grid.
Regards,
Shivananda

Problems after applying patches - please help

Hi All,
i've just applied some patches last week to one of my CF servers (CF 8.01 on SBS 2003). I followed the instructions and didnt really have any issues i noticed until yesterday. The debugging output on screen is gone, replaced by a 500 error and a ton of error codes like this:
[code
]ROOT CAUSE:
java.lang.NoSuchMethodError: coldfusion.server.DataSourceService.executeQuery(Ljava/sql/Connection;Ljava/lang/String;L java/lang/String;Lcoldfusion/sql/ParameterList;Ljava/lang/Integer;Ljava/lang/Integer;Ljava /lang/Integer;[IIIZZ)Lcoldfusion/sql/Table;
          at coldfusion.sql.SqlImpl.execute(SqlImpl.java:329)
          at coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:838)
          at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:528)
[/code]
i also cannot view the logfiles in CF administrator. Similar error code as above - full page.
Patches i applied were:
APSB12-06
APSB11-29
APSB12-15
not necessarily in that order (i followed the order specified on adobe's site).
any help or guidance is greatly appreciated-i can provide any info that may help. t
thank you very much

Hi
First of all you might have taken backup of files before applying patches. If yes then please replace them first to stabilize it. Once that is done then apply patches one by one and test it before applying other one. That should help and identify the issue if there is any.
Regards
Swaraj

ACS 5.3 applying patch

Hello,
I have problem with applying patch on ACS 5.3. In release notes there is mentioned following command format:
acs patch install patch-name.tar.gpg repository repository-name
The problem is ACS 5.3 does't have this command syntax.
It does't have acs command.
Here is what i have trued:
acs/admin# patch install 5-3-0-40-1.tar.gpg rep
Do you want to save the current configuration ? (yes/no) [yes] ?
Generating configuration...
Saved the running configuration to startup successfully
% Manifest file not found in the bundle
repository rep
url ftp://172.30.5.217
user user password hash c7b11123e528660abea78d974339875394fbb234
Here is supported command that i found on ACS 5.3.
acs/admin# ?
Exec commands:
application Application Install and Administration
backup       Backup system
backup-logs Backup system and application logs
clock        Set the system clock
configure    Enter configuration mode
copy         Copy commands
debug        Debugging functions (see also 'undebug')
delete       Delete a file
dir          List files on local filesystem
exit         Exit from the EXEC
forceout     Force Logout all the sessions of a specific system user
halt         Shutdown the system
mkdir        Create new directory
nslookup     DNS lookup for an IP address or hostname
patch        Install System or Application Patch
ping         Ping a remote ip address
reload       Reboot the system
restore      Restore system
rmdir        Remove existing directory
show         Show running system information
ssh          SSH to a remote ip address
tech         TAC commands
telnet       Telnet to a remote ip address
terminal     Set terminal line parameters
traceroute   Trace the route to a remote ip address
undebug      Disable debugging functions (see also 'debug')
write        Write running system information
acs/admin#

Hi,
I find this odd, can you run a "show application"
Here is the output of my ACS -
Version information of installed applications
Cisco ACS VERSION INFORMATION
Version : 5.3.0.40.4
Internal Build ID : B.839.EVAL
Patches :
5-3-0-40-2
5-3-0-40-4
gdtsrv-acs5/admin# ?
Exec commands:
acs          ACS control commands
acs-config   ACS config mode
application Application Install and Administration
backup       Backup system
backup-logs Backup system and application logs
clock        Set the system clock
configure    Enter configuration mode
copy         Copy commands
debug        Debugging functions (see also 'undebug')
delete       Delete a file
dir          List files on local filesystem
exit         Exit from the EXEC
forceout     Force Logout all the sessions of a specific system user
halt         Shutdown the system
mkdir        Create new directory
nslookup     DNS lookup for an IP address or hostname
patch        Install System or Application Patch
ping         Ping a remote ip address
reload       Reboot the system
restore      Restore system
rmdir        Remove existing directory
show         Show running system information
ssh          SSH to a remote ip address
tech         TAC commands
telnet       Telnet to a remote ip address
terminal     Set terminal line parameters
traceroute   Trace the route to a remote ip address
undebug      Disable debugging functions (see also 'debug')
write        Write running system information
Tarik Admani
*Please rate helpful posts*

Error while applying patch for SOA suite 10.1.3.4 on Weblogic 9.2 - URGENT

Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Error while applying Patch 4960210

Hi,
I am trying to integrate oracle apps with Oracle EBS 12R and following Doc Id:376811.1 from metalink.
I have successfully installed patch 5983637, but when I try to install patch 4960210 on it, even though I stopped all the services on app server, i get the following error:
Certain files which need to be reinstalled by oracle universal installer are being used by one or more applications.
Please close any running applications before continuing.
NOTE: when I upgraded the existing OracleAS 10.1.2.0.2 Infrastructure to Oracle Identity Management 10g (10.1.4.0.1) I created a new oracle home and installed my components there (unknowingly), so not sure if this causing problem.
Not able to go further Please help..!!!!
Thanks

Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander

Problems applying patch 8.1.7.1.1

Similar Messages

Maybe you are looking for