Problems booting from OSX DVD and External FW HDD

I've been trying recently to take a Dual-Bay Firewire Harddrive unit running a Oxford Semiconductor OXFW911 Chipset. I have two 250GB Hard drives and on one of these I have it Partitioned into 3 partitions. One is my Scratch Partition, one is the Restore of a DVD Install Disc and the last is a "Pre-Installed" version of OSX. I want to be able to boot from the Install DVD partition and the "Pre-Installed" Partition. I have successfully Imaged the Install DVD Partition and was able to boot from that partition once to install OSX on a computer without a DVD drive.
Problem now is that I can't boot from the partition, or I should say, I select it from the Sys Prefs and it will pass the grey screen to a the blue background and just get hung up. It never displays the dialog to select a language to begin the install.
I also can not boot from the Install DVD. It will show up in the Startup Disk in Sys Prefs but always ends up hanging.
I've tried booting using "Option" and it displays my Internal HD and then two icons for the Install DVD Partition on the External FW Drive. Neither one allows for me boot up.
Any ideas for what I may be missing?
Thanks,
Russ

It appears that if the Partition with OSX was installed from anything besides the Restore Disc, the Powerbook won't boot to it.
I think this is ridiculous, and if I've went wrong somewhere, someone please correct me.
Thanks.

Similar Messages

Cannot boot from OSX DVD - ACPI error

I am unable to boot from my OSX installation DVD. While booting I receive the following message:
Panic (cpu 0 caller 0x003A934F) Unable to find driver for this platform: ACPI.
I have tried re-installing the combo updater and flashing the PRAM, without any success.
Can anyone PLEASE HELP? My hard drive needs repair and I must boot from DVD in order to gain access to make the repairs with the Disk Utility.
Much thanks!

Will it run the Extended Tests from Apple Hardware Test (Boot while holding "D")?
If it won't boot from the install disk, it is not a problem with any software on your hard drive. It has to be a hardware problem; probably the DVD drive, since OSX is mostly working. If you have another Mac that can read DVDs and has FireWire, put the DVD in that Mac and boot it in Target Disk Mode (hold "T" while booting. Connect it to the Mac Pro with a FireWire cable, and boot the Mac Pro while holding Option. If the DVD shows up, select it and click the straight, right-pointing, arrow.
If that doesn't work, try booting the Mac Pro in Target Disk Mode (Boot while pressing "T"), connect it to another Mac via FireWire, and try to repair the Mac Pro disk with Disk Utility (Tiger version), or Disk Warrior (version 4 or later).

How do I enable booting from CD/DVD and USB drives?

Ok, I have been struggling with this all night, and I am stumped. I have a brand new z510 notebook, and I need to do a clean install of windows 8.1. Problem is that I can't seem to boot from CD or USB. I have entered the bios, and although the DVD rom drive works, and it shown correctly in BIOS, it does NOT allow me to add it to the boot list. Also, there is an option called 'Boot From USB' I enable that, and still the USB boot does not show up in the boot list. The only thing I have in the boot list is the 'Windows Boot Manager' and it lists the name of my drive.
I thought that maybe secure boot was the issue, but I tried disabling this, and is still doesn't let me do what I want.
I am kind of at my wit's end here. I just paid $800 for a top of the line laptop, and I can't even boot from a cdrom. Every computer I have had since the 1980s have allowed me to do just that without trouble.
What am I missing??
Solved!
Go to Solution.

Do you see any BIOS settings like "Boot mode" with a "CSM" or "Legacy" type of item as a choice? You might try toggling that to see if you can successfully boot from external media that way.
Disclaimer: I don't have a Z510 to confirm the BIOS screens. I'm going by inference from what I see on my Y2P and X1C.
Please let me know if this works.
Regards.
Edit: LenBlazer was quicker on the draw.
Please do post back with how things work out.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Display out, how to boot from OSX CD with external monitor

Folks,
My LCD display is broken and I have been using an external monitor for some time, however I'm ready to sell my laptop and wanted to wipe the drive and reload OSX. When I try to boot from the OSX CD I can see part of a desktop on my external monitor and I can see the curser move but some of the desktop is out of view as if the screen wasn't being scaled properly. Any way to make this work so I can see everything?

Hi, mrhifi. I typed a reply earlier, but I must have hit the "Back" button instead of "Post Reply".
After booting to your CD or DVD, press the F7 key to toggle between mirroring and extended-display mode on the external screen. This may give you a complete, usable desktop on that display. However, I don't know that it will work as it should with your built-in display broken. You'll just have to try it and see.

Problems Booting from Tiger DVD

I've seen a lot of people with this problem, but the solutions all seem to be different. So here's my scenarion. I'm running a G4 MDD with 1.4.8 off a 120 GB Apple ATA drive. I've had a number of problems with crashes & kernel panics which I can't tell are software or hardware driven. I bought a 320 GB seagate drive to take over for the original, and want to install a clean system. I'll gradually migrate over apps, and when I have a stable platform, I'll wipe the old drive. Fine.
Unfortunately I can't get my machine to boot off the Tiger DVD. Standard restart from DVD->blue screen. Option key->Black screen-Nada. Zap PRAM->Blue screen. Safe Mode->Gray Screen.
The disk looks lovely and boots another machine.
I'm trying to boot in my original Superdrive, and the DVD comes up fine when I boot off my hard drive. One article suggested that having a non-apple drive in the 2nd Bay (which I do) can cause problems. I disconnected it, and still no boot. Some other posts on this topic say that possibly the Superdrive is going bad. Is there a way to test it? It functions fine in all other respects.
I don't have access to an external DVD drive, but do have my original Apple Non-super DVD in a carton.
Suggestions? Thanks.

Sig, it will offer the Install button, for restarting into the DVD, if it mounts.
Try zapping PRAM, with the disk installed, and then immediately holding down the "C" key. If that fails, and it boots into your internal drive, just open System Prefernces, and select the Tiger disk as the startup disk. When you restart, hold down the mouse clicker till the DVD is ejected, and then it will just default to the internal drive.

Won't boot from OSX DVD

I am running 10.4.8 on a MacBook Pro--suddenly it tells me I can't install this OS on this computer (?). Also, it won't boot from the Tiger DVD (all other DVD's work fine). I tried holding down "C) on startup and even the cmd-opt-shft-delete combination. Something strange here. I'm wanting to install X11 but can't get the DVD to work. What can I try?

You cannot install a prior version of OS X on any Mac unless you: a. Do and Erase and Install; or, b. Do an Archive and Install. However, neither of these is needed to install X11. Insert the OS X Installer Disc One (gray label) that came with your computer. Locate the Additional Software package and double-click on it. When the installer loads you can select the items you want to install by placing a check in the box beside the item's name in the list box. Check the X11 box then click on the Install button.
You can only boot an Intel Mac using the installer disc that came with the computer (gray label.) Retail installers (black label) will not work with Intel Macs.

Mac Mini stuck with windows install, won't boot from OSX DVD

Ok, I just bought this mac mini from ebay, yeah i know but it was cheap. I got it and it came with windows xp installed. I thought ok, I will just pop in my snow leopard disk and get rid of windows. so i put in retail new copy of snow leopard in the drive, shutdown, power on, hold C... grey screen for a little while then into windows boot screen. Thought ok, I will try reset pram, option + command + p + r, nothing... just boots into windows. I have tried to original osx 10.4 restore disks that came with the machine with the same results. I also tried holdind D during boot with the original disks and it still does the same thing.
I have also tried holding down option during boot, thinking it would give me my boot options, nothing still goes into windows. I am using a new aluminum white keyed usb apple keyboard and apple optical mouse, all plugged into the back of the machine.
I don't know what to do next, if I can't find the solution it looks like i am going to have to take this thing apart and yank the drive and format it on my other machine with osx partition.
thanks

There's a couple more options yet.
First, try a different USB keyboard.
Second, when in Windows use the Bootcamp system tray utility to choose bootup from the OSX partition. You can install the Bootcamp system tray utility from the SL disk.
Third, if you have another Mac and an appropriate firewire cable, bring the Mini up in Target Disk Mode and blat the disk that way.

BRAND NEW Mac Pro won't boot from Leopard DVD, kernel panics!

I just received my brand new Mac Pro today. It's a BTO machine with the upgrade to the NVIDIA 8800GT, a second optical drive and a Mac OS X Server license. The system has Mac OS X server installed on the default 320GB drive. I decided to use the server license as a virtual machine running in Leopard client. So, I installed 2 new 500GB Seagate 7200.11 (Retail) drives in the machine, zeroed them out in prep for installing Leopard client.
At this point, I pop in a freshly-purchased retail copy of the Leopard DVD and restart. When I try to boot from the DVD and install Leopard to one of the new Seagate drives, I get kernel panics - need to restart the machine. Also tried booting from the Mac OS X Server DVD and this too only caused kernel panics. The DVD's read perfectly from within Mac OS X Server and boot from hard disks is flawless.
I spent an hour on the phone with a level 2 tech at Apple - Tried swapping out the RAM and moving around the DIMMS to no avail. I am at a loss to what this could be. Seems to be a hardware issue and the tech thought it was likely a problem with one of the memory risers but couldn't send replacements. Anyone else with a similar issue?
This is my first Mac and it looks like this Mac Pro is going back for an exchange and I'll have to wait yet another 10-12 days for a replacement to arrive. Bummer.
Am I missing something simple here? Does this seem to be a hardware issue?
If anyone has any ideas before I ship this one back, please write!!!

New Mac Pros will not install the Leopard retail disc. They will only install the Leopard disc which shipped with them labeled Mac Pro. That has always been true. Macs can only boot the system that ships on DVD in the box that came with them, and newer retail releases. They can never boot from an older retail release than what shipped in the box.

MSI KT6V-LSR (MS-7021) Can't Boot From CD/DVD

New to the forum and would like to say hello to everyone first.
Here's my problem i can't boot from my DVD drive, my 2 HDD's and 2 DVD drives are working fine inside windows.
Inside the bios screen they are detected in the right order, and are in the right boot order. I checked the jumpers on them and they seem fine and i haven't touch them since i changed my dvd rewriter 6 months ago and i have booted from a cd since then.
I just booted up the Windows Xp disc on a differnt pc and it worked fine, yet on mine it goes straight to my XP OS.
I was hoping someone could help me out, thanks.
MSI KT6V-LSR (MS-7021)
Athlon XP 2400+
768 MB Ram
Windows XP Home sp3
Maxtor 6Y120L0(master)
Seagate ST3400832A(slave)
HL-DT-ST DVD-RAM GH22NP20(master)
JLMS XJ-HD166S(slave)

Did you install Nero 9 by any chance?
Even if you didn't, and old version of InCD can cause this too.
The problem is upper/lower filters, they are screwed and thus your CD's are missing in action.
Run this tool inside windows: ftp://ftp6.nero.com/tools/General-CleanTool.zip
As for booting, change the boot order in the BIOS, probably set to harddisk first.
If that doesn't solve it, disconnect one of the CD's and test with a single one, maybe one is broken and hinders the other, but that is my last guess.

Error code 5 when booting from CD/DVD - Equium A200

I am trying to boot from CD/DVD and get the message: Cannot boot from CD - Code 5
Using a Windows Vista Home boot-cd.
The CD/DVD-station is ok. Have tried another station.
Have also tried another HDD.

Generally speaking you can use original Microsoft installation disc for OS installation. I have done this numerous times and have never noticed such errors and I have done this on different notebooks. One of them was Satellite A200. it is absolutely the same as your Equium.
My question: do you use original Microsoft installation disc or some own creation?
Put error code 5 in Google and you will find interesting articles about this.

MSI P6N SLI V2 does not boot up from cd/dvd and few other problems

HI
I just bought a computer P6N SLI V2 + E6750. It has following problem. It does not boot from cd.
I have Sata HD. CD/DVD is installed to IDE as a master.
I have done settings in bios so that First boot is cd/dvd and second is sata HD. Anyhow it still goes to the hd and stars windows.
I was only able to boot up from cd when I disabled hd from boot sequency. Meaning I left only cd/dvd there.
Hopefully you pro's can help me.
Then there is another problem. Windows is telling me that it found new pci device. I do not know what device. I have only Graphig card (geforce 8800 gts) installed into pci-E. Drivers and software are also installed, I assume proberly. How to find out what windows thinks it found.
Third problem is onboard soundcard. I cannot get any sound out from the machine. I have downloaded driver from realtek, but still no sound.
Unfortunatelly I do not have original software for motherboard. Only the latest from MSI website.
Hopefully someone can help me.
thanks.

About bootup, i dont know yet.
To find out what windows found, look in devicemanager.
To go there go to controlpanel, system then choose devicemanager.
There you can see what's installed.
Last, your soundcards needs to be enabled in bios, under integrated peripherals there should be a line with "onboard sound", enable this and sound should work, unless its broken.

Cannot boot my mini from CD/DVD or external firewire drive

The problem I face is simple: I cannot boot my mini from CD/DVD or external firewire drive.
When I boot with option key down, I see the Mac OSX boot and a ghost Windows from an early BootCamp installation, removed long ago (I now use Parallels).
I tried disconnecting everything but keyboard and mouse, to no avail.
I tried resetting PRAM and NVRAM.
I tried disconnecting the mini from everything and waiting one night.
I tried erasing the disk from another Mac when booting the mini as FireWire drive.
And still, the mini refuses to boot from the original CD, or any external drive.
Anyone has an idea whether it is software or hardware ?
Could it be a consequence of the early Boot Camp install and then removal ? Is there a way to reverse this ?
Any help or hint will be appreciated.
Best regards
JC
Intel mini early 2006 Mac OS X (10.4.10) 2gb RAM, core duo

Hi DaddyPaycheck,
Thanks for your message. Indeed, I failed to mention the problem from the Startup Disk Preference point of view.
Bootable CD and/or external disks also never appear in Startup Disk Prefs.
It indeed sounds like time for a backup (I did that) and a HD erase and reinstall of OSX. But since the CD does not want to boot, I tried installing from another Mac with my mini booted as FireWire drive. And that failed, probably because the master mini I used was a G4 one...
Best regards
JC

Working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic inserted the tech tool DVD

working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic by inserting the tech tool DVD, wich produces the following highligted text:
panic(cpu 0 caller =xffff0003): 0x300 - Data access
latest stack backtrace for CPU 0:
Backtrace:
0x0009CC88 0x00D63C 0x00029DAO 0x000BOA10 0x000B4270
proceeding back via exception chain:
Exception state (sv=0x26acd700)
PC=0x2717E900; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x2717EBE4; R1=0x26AD3AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27178B0 0x00344ACB 0x00345970 0x2717EC08 0x2718458 0x00340590
0x003496EC 0x0034B59C 0x0034A6BC 0x000B1DD4
Kernel Loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWDHC1(3.9.5)00x2717c000->0x271aafff
dependency: com.apple.iokit.10PCIFamily(2.6)00x1e840000
dependency: com.apple.iokit.I0FireWireFamily(3.4.7)00x270dd000
Exception state (sv=0x26abd280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000;R1=0x00000000; XCP=0x00000000 (unknown)
BSD process name corresponding to current thread: kernel_task
so what
greetings from berlin

Greetings,
It appears to be a FW problem, possibly flaky case, or drive problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Can't boot from OSX and may have a virus

I'm having a similar problem as Davo21 in "computer won't boot up in os x". After running Norton System Works to try to resolve an issue that I was having with my computer, I'm getting a message, "/etc/master.passwd:not a directory" on a black screen when I try to start up.
It started in early December after I downloaded some stuff off the internet and it seemed like I might have picked up a virus. I know, that's not supposed to happen with OSX, but my computer started doing wierd things like switching out icons for whole types of files - i.e., .wav files would show up with a totally different icon. Restarting solved that problem, but I noticed that on both my wife's and my computer (both Macs - hers a Single core Intel Mini running OSX 10.4 and mine a G3 700MHz running 10.3.9) the internet was running exceptionally slow, while on my work computer (a Dell PC running Windows XP) it was running just fine. All three computers are networked, so I surmised that something was affecting the Unix system but not the Windows, but when I ran Norton Anti-virus, it came up clean. More wierd things kept happening, so last week I decided to run Norton Disk Doctor and it changed thousands of directory settings and now my computer won't boot up from my main boot drive with OSX 10.3.9. I've run the Disk Utilities on the 10.3 Install Disk and I've run Disk Warrior and they both say that the boot drive is repaired, but I still get the same message when I try to start up normally.
I have several partitions on my original drive and several more on the additional 240GB hard drive that I installed a couple of years ago, so I can boot up from an old copy of OSX 10.2 on another partition. The latest wierd thing is that now one of my other partitions on the original hard drive won't mount.
My questions are:
1) How do I get back to being able to boot from OSX 10.3?
2) Where can I get help to figure out what's going on with my computer and how to remedy it?
I've been looking at some of the information on the Leap-A malware and it seems like there are some similarities, however I'm running OSX 10.3.9 and not 10.4.
Any suggestions would be appreciated.
Thanks,
G4 700MHz Mac OS X (10.3.9)
G4 700MHz Mac OS X (10.3.9)

DMcSantaFe,
as was said before Norton Utilities and Disk Doctor were discontinued almost 3 years ago (for some very good reasons!). It caused much more trouble than it solved.
Here are the articles:
Symantec discontinues Mac Norton Utilities, SystemWorks
Norton Utilities, SystemWorks development halted
TMO Scoop - Symantec Confirms Norton Utilities & SystemWorks' Demise [Updated]
Tech Tool Pro and DiskWarrior are presently the most reliable utilities. For more information on regular housekeeping read this: MacOS X 10.3/10.4: System maintenance
Unfortunately Norton usually damages the file system beyond repair. The only cure is a reinstall.
If this answered your question please consider granting some stars: Why reward points?

Problem: installed new hard drive but can´t boot from leopard dvd

So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
As an alternative I just tried booting the comptuer using the original CD and it did read it.
I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
Is it that my ibook g4 can´t be booted from leopard dvd?
Please advise. thanks!!

OK, so I decided to leave my computer resting all night and give it a new try this morning.
This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
- I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
- My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
Below is the information I get from coconut battery:
My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
The last system profiler I was able to pull shows:
Battery Information:
Charge Information:
Charge remaining (mAh): 58320
Charging: No
Full charge capacity (mAh): 58512
Health Information:
Cycle count: 256
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 16250
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
AC Charger Information:
AC Charger (Watts): 26
Connected: Yes
Charging: No
Any help is greatly appreciated.
Thanks a bunch!!!

Problems booting from OSX DVD and External FW HDD

Similar Messages

Maybe you are looking for