Problems (bugs) with Project Explorer LV8.5.1 Windows Vista 64bit

Helo all,
I am using Windows Vista 64bit with all updates and service packs on an ASUS G1 dual core 4gig memory. After writing code for a while I find that I cannot execute my top level vi from the project explorer. I can run the vi from outside the project no problem. If I try to create a new project and load the vi into it the LV hangs and the windows task manager cannot kill either the vi or the new project explorer, I have to reboot the computer to recover. I have attached the vi.
regards,
Karl
Attachments:
FS Test Main V0.9.vi ‏164 KB

Hi Karl,
I am having a look at this issue--I shall try to reproduce it and get back to you with my results.
Ipshita C.
National Instruments
Applications Engineer

Similar Messages

Help with Drivers for HP dv8315nr for Windows Vista 64bit

Hi everyone! In 2007 i bought a laptop a HP Pavilion dv8315nr with the hope that the stickers in his keyboard saying "Vista Compatible" was true and the promise of that the AMD Turion processor can handle a 64bit OS. Today i realize that was not entirely true, because i got the Windows Vista ultimate for 64bits and the processor can handle this OS but i see that in the HP site don't provide any support for the drivers, so i get the problem that i don't have audio in my laptop and the modem adapter doesn't work either.
My question is can anybody help me with the audio driver for the HPdv8315nr for windows vista 64bit, that's my priority.
I appreciate the attention for this manner. Thank you
Jorge

I have the same problem with my Photosmart 7350's--I have two. I cannot get either to work with the New Mac Pro driver--Gutenprint .... I got the new drivers from Apple for HP but they fixed nothing. I even downloaded the newer drivers from HP, but their Printer Assistant does not seem to be working. I downloaded it twice. I can get a test page to print a few lines but the rest of the page is blank. When I try to print with either Pages or Word I get either nothing or trash.
My computer is the New Mac Pro 2.8 8-core with OS X 10.5.4.
These printers work with my Windows machine and I have read where they work with the Mac OS X. Can someone help. The link for printing trouble shooting did not help. My guess is the driver but I cannot get one do show up even after the HP download.
thank dr_lynch

Problems printing smaller sizes in Lightroom 1.4 Windows Vista-64bit, R800

Hi All,
I am having problems printing smaller sizes in Lightroom v1.4, WIndows Vista-64 bit, on an Epson R800 (driver version 6.5cAs, the latest one) . When I try to set the printer settings in both the page set up and the printer setup, it displays as 5X7, but somehow when it actually goes to print, the print dialogue box reverts back to 8.5 X11. I can print 5X7 in CS3 with no problems on the same machine. The prints coming from light room look ok, they are just the wrong size for the page. Some how it appears that lightroom is not able to change the printing size defaults from 8.5X11. The prints in lightroom are fine as long as I use 8.5X11 or print in CS3. Any help to fix this would be great.

make sure your ventilation ducts are clean from dirt, Vista put lot more strain on every component of your laptop, so the temperature increase should be normal. Xp is lot less demanding on computer compoents, however it does sound like your heat ventilation fan and fins are clogged with dusts. So open up the laptop to clean away any dusts that maybe there.

Problem with windows Vista 64bit

Hello!
I have core 2 quad processor, MSI p7n diamond nvidia 780i motherboard. At the end of instalation windows Vista 64bit, it has show blue screen and I dont know why? Can somebody help me? And I have 4GB ram.

Try to install Vista with one memory stick only.
Also, provide full system specs. >>Posting Guide<<

LV8.5.1 Labview memory is full error message Windows Vista 64bit

I have a small application where the top level vi will no longer load into either LV8.5.1 or LV8.6 (see attachment) when using the project exployer. Anyone else have this problem?
Hardware:
ASUS G1 4Gig memory
Windows Vista 64bit
Regards,
Karl
Attachments:
LV load error code 14.jpg ‏24 KB

Hi Jon,
Here is the code,
Regards,
Kal
Attachments:
SUbvis.zip ‏499 KB

Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.

Having trouble with iCloud Photo Stream on a Windows Vista 64 machine. Can you tell me why Photo Stream will not stay enabled. When I reboot, it will disable not to mention that it will not get any pushed photos. Is there a 64 bit version?

Hello tw_mama,
I was looking into the issue you are experiencing and found an article that may shed some light on the subject. It's called iCloud: Account troubleshooting found here: http://support.apple.com/kb/TS3988
This section in particluar:
I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
All the best,
Sterling

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista.

"iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista. The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. For more information see http://docs.info.apple.com/article.html?artnum=301301"
So now you iPod Shuffles will work! No more returning them to Apple!

I can now setup iTunes on my 64 bit Windows Vista. I've also brought over my library via the home network from my old Windows XP computer (although I needed to use Add folder to Library as the songs were not automatically recognised in the library). However, I can't get the i-Pod to load. At first I got a message saying that I needed to download a driver and now there is no recognition of the iPod at all when I connect. Is there anything I can do?

Problem launching flash cs5 and cs5.5 on windows vista

Hello Every Body. I have a problem launching flash cs5 and cs5.5 on windows vista home premium edition. When i launch it, the register screen appears(the one that tells the trial time left) but the flash main window always stays black (or white)and is not responding. I had it working about one week ago and i can't figure out what is the problem .It tried reinstalling couple of times without succes. I also tried deleting the left flash cs5 program files after uninstall but it didn't work . I would need your advice. Here is the screen as it appears:
BEFORE I CLICK IT IT IS BLACK9(notice that in the up bar it sais not responding)
Thanks
-jeremyskateboard

here is the black screen i get

Problem/bug with AIR 3.0

Hi guys,
I'm here again. I got this error when I tried to publish my project with AIR 3.0.. Actually, I've created an application usign AIR 2.6 (default comes with CS 5.5). It was used to get published and I used to update it on regular basis. Few days back I had to copy AIRSDK3 folder to Adobe's program files' folder, where I renamed AIR2.6 to anything else and AIRSDK3 to AIR2.6... Today, when I tried to publish my same project, I got this following error. Hope that would help adobe (as it is beta version).
(By the way, when I renamed the folders to their original names, it worked and published).

Steve,
We have seen the same thing and reported it to Forte. We have not yet
heard back with a bug report number...
For now, we have removed all comments from our sql code.
Derk
>
We have just switched from version 2.0.H.1 to version 3.0.F.2 in development,
and have discovered a bug with comments in SQL code.
Anywhere in a cursor definition, or within SQL code in a method, if we use the
multi-line comment format "/* ... */" even on a single line, then the code
compiles fine, but crashes at runtime with a "Invalid SQL Command" error. It
looks as though Forte is including the comment as part of the SQL!
Has anyone else seen this problem? We have not found it in the known bugs list
for 3.0.F.2 or the fixed bugs list for 3.0.G
This worked fine for us prior to version 2, and if we don't get it fixed in
Forte, it means a lot of rework to change the existing comments to single-line
"// ..." format.
Regards,
Steve Isaac
Senior Consultant, Information Services Group
Hydro Electric Corporation of Tasmania
4 Elizabeth St, Hobart, Australia, 7000
Phone : +61 03 6230 5161
e-mail: [email protected]
Check out: http://mama.indstate.edu/users/sodana/lucado.html
*** Derk Norton ***
*** U S WEST Communications Voice : (303) 965-8772 ***
*** 1801 California Street FAX : (303) 896-3565 ***
*** Denver, Colorado 80202 Email : [email protected] ***
**********************************************************************

Problems with iTunes and iPod running under Windows Vista

I recently changed my computer. I now have an HP Pavilion running windows Vista (use to have XP). I have a video iPod -30GB. I downloaded iTunes onto the new equipment without incident, but that is the last thing that went smoothly.
I can no longer watch TV shows or movies from iTunes. The video plays like a slide show of stills (the audio is real-time however). Eventually I will get an error message from Windows and it closes the application.
I am also having issues with syncing my iPod and computer. I get a message requiring me to delete all of the content of the iPod and replace it with the contents of iTunes. I haven't done this -no trust and no backup
The delete message is from iTunes. I suspect it is a security feature to prevent downloading to more than one iPod, as iTunes doesn't seem to 'know' my iPod anymore. Syncing has also caused iTunes to close and my computer to reboot. Has anyone else had these problems?
HP Pavilion Windows Vista

you may want to take a look at the iPod 101 tutorials. Those might help.
Regards.
< Edited by Host >

The same problem with Windows Vista 64bit-iTouch not recognized by iTunes

Happy Holidays, all. I was just hoping that someone had come up with a fix to the problem with iTouch and Windows Vista Premium (64bit). All I get is a picture of the plug pointing to the iTunes image on my iTouch, can't even see the regular icons yet. The device is not picked up by iTunes, either. Tried reinstalling iTunes, the whole bit. Thought I'd try one more time to get a fix before returning the product. By the way, if you ever finally do get through to Apple Tech Support, they'll act like they have never heard of the problem (at least the guy I spoke with did. He wasn't very nice or very helpful). Anyway, good luck and thanks.

I have I think the same issue. iTunes can see a Nano but not an iTouch. Vista see the device when I plug it in, but no luch with iTunes. I ended up using a old laptop with XP which is slow and out of hard drive space, so I need a fix.

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Problems with OPMN process (very unstable) on Windows Vista

I am running SOA on Windows Vista(V10.1.3.1). I am having the following problems with the OPMN process
 
1) Shuts down when idle
 
2) After crashing I try to restart SOA Suite using the command line>opmnctl startall
 
I get the error message..."Unable to Open Service with error Access is denied."
 
If I use the command line>opmnctl start
 I get the error message but OPMN process starts????
 
3) but then...Crashes when trying to Deploy a webservice through Application Server Control.
 
Anyone else having these sort of issues and have come across a fix?
 
regards
 
Paul P

I'm also having the same problem (on XP) on 10.1.3.4 I'm guessing this is a security issue but can anyone tell me how this can be resolved.
It appears to work fine as Admin but regular users without Admin rights have the above issue.

Problems with the installation of iTunes on Windows Vista

When I download any version of itunes error occurs' Microsoft.VC80.CRT, Version =8.0.50727.4053'',''type =''win32'',''1fc8b3b9 ... publicKeyToken = Architecture =''or86''. Please refer to Help and Support for more information. HRESULT: 0x800736FD'. How can I solve this problem?

HRESULT: 0x800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it. I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
Please, I would absolutely love the help, i'd be eternally grateful for it.
-Tyler

Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

Problems (bugs) with Project Explorer LV8.5.1 Windows Vista 64bit

Similar Messages

Maybe you are looking for