Problems building lib32-gstreamer0.10-base

I've been trying to build lib32-gstreamer suit, but it has been impossible. lib32-gstreamer0.10 installs without issues, but -base asks for a lot of lib32 packages (also in the AUR), most of them downloading files from ftp://ftp.archlinux/*/i686/* (which btw doesn't exist?), which are simply copying binaries.
I don't know, but it's kind of weird that it's so hard, I imagined that building these packages were going to be easy (or that they were going to be available from the multilib repo). I believed that because they are popular (and important?) packages, though I couldn't find many posts in the bbs, and the wiki article isn't very deep.
I don't know, maybe I'm not understanding something, or the original build shouldn't relay on a package like that.
Btw, all this problem is because I'm trying to get libgstinterfaces0.10.so to play Dino Run SE :(

pablox wrote:I've been trying to build lib32-gstreamer suit, but it has been impossible. lib32-gstreamer0.10 installs without issues, but -base asks for a lot of lib32 packages (also in the AUR), most of them downloading files from ftp://ftp.archlinux/*/i686/* (which btw doesn't exist?), which are simply copying binaries.
That's the old way to do things before the multilib repo. Now the lib32 packages are built with gcc-multilib. You'll need to update the PKGBUILD for these. I don't use that multilib stuff but there's probably more info in the wiki or you could check the packages in the multilib repo for an example. Maybe if you would post the packages names, someone might be willing to update them for you.
pablox wrote:
I don't know, but it's kind of weird that it's so hard, I imagined that building these packages were going to be easy (or that they were going to be available from the multilib repo). I believed that because they are popular (and important?) packages, though I couldn't find many posts in the bbs, and the wiki article isn't very deep.
I don't know, maybe I'm not understanding something, or the original build shouldn't relay on a package like that.
Btw, all this problem is because I'm trying to get libgstinterfaces0.10.so to play Dino Run SE
The multilib repo is very strict about package addition to keep the workload at a minimum. So only the most popular packages (like wine, skype) are included.

Similar Messages

Pidgin 2.6.1-1 broken (missing gstreamer0.10-base dep)

Since bugtracking is down I'm reporting this here and I apologize if I missed something obvious.
I've used pidgin for ages and the last update to 2.6.1 broke it for me:
pidgin: error while loading shared libraries: libgstinterfaces-0.10.so.0: cannot open shared object file: No such file or directory
From what I can tell the libgstinterfaces-0.10.so.0 lib is provided by the gstreamer0.10-base package which is NOT present directly nor indirectly in the deps section of the PKGBUILD of pidgin. The only package present is gstreamer0.10, NOT gstreamer0.10-base.
Since I'm a minimal user I also didn't get gstreamer0.10-base installed as a dep of other package which may otherwise have been pulled as a dep in the case of users who install much more packages than me.

tut wrote:
wonder wrote:the package need a rebuild in a clean chroot
what exactely do you mean by that? I have just upgraded to 2.6.1 and the same problem as described above.
wonder probably means that the maintainer of the package (not you) needs to build it in a clean environment so that he doesn't forget to add some dependencies just because his desktop system already has them installed by other packages.
As for the regular user, the easiest solution before it gets fixed is:
pacman -S gstreamer0.10-base
or
pacman -S --asdeps gstreamer0.10-base
The gstreamer0.10-base package owns the currently missing libs for pidgin, so just install it while it isn't included as a dep in the PKGBUILD.

"Problem building schema" exception in BPEL Designer

Hi all,
I use BPEL Designer 10.1.2.0.2 and encounter the following problem:
I built a web service based on the Oracle Toplink How To demo. The web service has one published method that returns a custom 'Customer' object.
I deployed the web service on my localhost (AS 10.1.3)
In my BPEL process, I create a partnerlink based on the WSDL that was generated by JDeveloper and let BPEL Designer create a local copy.
Then I created an invoke and had the wizard create in- and output variables for the invoke.
When I select either the input- or output variable in the structure pane, I get an error message when I click on the 'parameters' entry. The message shown is 'Exception - problem building schema!'
When I check the 'show detailed node information' box no additional info is shown!
Any Idea what might go wrong?
The WSDL looks as follows:
<definitions
name="updCustWS"
targetNamespace="http://examples.ox.model/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://examples.ox.model/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns0="http://examples.ox.model/types/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns1="http://www.oracle.com/webservices/internal/literal"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://examples.ox.model/types/"
elementFormDefault="qualified" xmlns:tns="http://examples.ox.model/types/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<import namespace="http://www.oracle.com/webservices/internal/literal"/>
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
<complexType name="getCust">
<sequence>
<element name="cust" type="tns:Customer" nillable="true"/>
</sequence>
</complexType>
<complexType name="Customer">
<sequence>
<element name="gender" type="string" nillable="true"/>
<element name="dateOfBirth" type="dateTime" nillable="true"/>
<element name="phoneNumbers" type="ns1:vector" nillable="true"/>
<element name="shippingAddress" type="tns:Address" nillable="true"/>
<element name="billingAddress" type="tns:Address" nillable="true"/>
<element name="firstName" type="string" nillable="true"/>
<element name="lastName" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="Address">
<sequence>
<element name="postalCode" type="string" nillable="true"/>
<element name="suite" type="string" nillable="true"/>
<element name="street" type="string" nillable="true"/>
<element name="province" type="string" nillable="true"/>
<element name="city" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="getCustResponse">
<sequence>
<element name="result" type="tns:Customer" nillable="true"/>
</sequence>
</complexType>
<complexType name="version">
<sequence/>
</complexType>
<complexType name="versionResponse">
<sequence>
<element name="result" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="getCustElement" type="tns:getCust"/>
<element name="getCustResponseElement" type="tns:getCustResponse"/>
<element name="versionElement" type="tns:version"/>
<element name="versionResponseElement" type="tns:versionResponse"/>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.oracle.com/webservices/internal/literal"
elementFormDefault="qualified" xmlns:tns="http://www.oracle.com/webservices/internal/literal"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
<import namespace="http://examples.ox.model/types/"/>
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
<complexType name="vector">
<complexContent>
<extension base="tns:list">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<sequence>
<element name="item" type="anyType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
</types>
<message name="UpdCustWS_getCust">
<part name="parameters" element="tns0:getCustElement"/>
</message>
<message name="UpdCustWS_getCustResponse">
<part name="parameters" element="tns0:getCustResponseElement"/>
</message>
<message name="UpdCustWS_version">
<part name="parameters" element="tns0:versionElement"/>
</message>
<message name="UpdCustWS_versionResponse">
<part name="parameters" element="tns0:versionResponseElement"/>
</message>
<portType name="updCustWS">
<operation name="getCust">
<input message="tns:UpdCustWS_getCust"/>
<output message="tns:UpdCustWS_getCustResponse"/>
</operation>
<operation name="version">
<input message="tns:UpdCustWS_version"/>
<output message="tns:UpdCustWS_versionResponse"/>
</operation>
</portType>
<binding name="updCustWSSoapHttp" type="tns:updCustWS">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="getCust">
<soap:operation soapAction="http://examples.ox.model//getCust"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
<operation name="version">
<soap:operation soapAction="http://examples.ox.model//version"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
</binding>
<service name="updCustWS">
<port name="updCustWSSoapHttpPort" binding="tns:updCustWSSoapHttp">
<soap:address location="http://localhost:7780/toplinkDemo-toplink-context-root/updCustWSSoapHttpPort"/>
</port>
</service>
</definitions>
any help would be greatly appreciated!
Thanks in advance,
Rob

Hi
I know it's an old thread, but I'm having the same issue.
I have created an EJB3 web service that returns an object with 2 nested objects. The autogenerated WSDL looks something like this:
<?xml version = '1.0' encoding = 'UTF-8'?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns0="http://www.oracle.com/webservices/internal/literal" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://smbc.crm.persistence.services/" name="CRMBusinessWSService" targetNamespace="http://smbc.crm.persistence.services/">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns1="http://www.oracle.com/webservices/internal/literal" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://smbc.crm.persistence.services/" elementFormDefault="qualified">
<import namespace="http://www.oracle.com/webservices/internal/literal"/>
<complexType name="Businesses">
<sequence>
<element name="partyId" type="long" nillable="true"/>
<element name="businessContactPoints" type="ns1:list" nillable="true"/>
<element name="businessAddresses" type="ns1:list" nillable="true"/>
</sequence>
</complexType>
<complexType name="BusinessAddresses">
<sequence>
<element name="locality" type="string" nillable="true"/>
<element name="paon" type="string" nillable="true"/>
<element name="siteUseType" type="string" nillable="true"/>
<element name="locationId" type="long" nillable="true"/>
<element name="townName" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="BusinessContactPoints">
<sequence>
<element name="telCountryCode" type="string" nillable="true"/>
<element name="partyId" type="long" nillable="true"/>
<element name="telAreaCode" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="queryBusinessesFindByPartyId" type="tns:queryBusinessesFindByPartyId"/>
<complexType name="queryBusinessesFindByPartyId">
<sequence>
<element name="int_1" type="int"/>
</sequence>
</complexType>
<element name="queryBusinessesFindByPartyIdResponse" type="tns:queryBusinessesFindByPartyIdResponse"/>
<complexType name="queryBusinessesFindByPartyIdResponse">
<sequence>
<element name="return" type="tns:Businesses" nillable="true"/>
</sequence>
</complexType>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://www.oracle.com/webservices/internal/literal" targetNamespace="http://www.oracle.com/webservices/internal/literal" elementFormDefault="qualified">
<import namespace="http://smbc.crm.persistence.services/"/>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<sequence>
<element name="item" type="anyType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
</types>
<message name="CRMBusinessWS_queryBusinessesFindByPartyId">
<part name="parameters" element="tns:queryBusinessesFindByPartyId"/>
</message>
<message name="CRMBusinessWS_queryBusinessesFindByPartyIdResponse">
<part name="parameters" element="tns:queryBusinessesFindByPartyIdResponse"/>
</message>
<portType name="CRMBusinessWS">
<operation name="queryBusinessesFindByPartyId">
<input message="tns:CRMBusinessWS_queryBusinessesFindByPartyId"/>
<output message="tns:CRMBusinessWS_queryBusinessesFindByPartyIdResponse"/>
</operation>
</portType>
<binding name="CRMBusinessWSSoapHttp" type="tns:CRMBusinessWS">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="queryBusinessesFindByPartyId">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="CRMBusinessWSService">
<port name="CRMBusinessSessionEJB" binding="tns:CRMBusinessWSSoapHttp">
<soap:address location="http://blah.solihull.gov.uk:1234/crm-ws/CRMBusinessSessionEJB"/>
</port>
</service>
</definitions>
The web service runs fine and returns a valid XML document (like below):
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://smbc.crm.persistence.services/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<env:Body>
<ns0:queryBusinessesFindByPartyIdResponse>
<ns0:return>
<ns0:turnover xsi:nil="1"/>
<ns0:partyId>551837</ns0:partyId>
<ns0:employeesLocal xsi:nil="1"/>
<ns0:employeesNational xsi:nil="1"/>
<ns0:businessName xsi:nil="1"/>
<ns0:classificationSic xsi:nil="1"/>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:classificationLacors xsi:nil="1"/>
<ns0:sbaLinkNumber xsi:nil="1"/>
<ns0:legalStatus xsi:nil="1"/>
<ns0:localAuthority xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:dateCommencedTrading xsi:nil="1"/>
<ns0:businessDirectoryListing xsi:nil="1"/>
<ns0:businessStage xsi:nil="1"/>
<ns0:classificationBcl xsi:nil="1"/>
<ns0:employeesGlobal xsi:nil="1"/>
<ns0:descriptionOfBusiness xsi:nil="1"/>
<ns0:businessContactPoints xsi:type="ns1:vector">
<ns1:item xsi:type="ns0:BusinessContactPoints">
<ns0:telCountryCode xsi:nil="1"/>
<ns0:partyId>551837</ns0:partyId>
<ns0:contactPointType>EMAIL</ns0:contactPointType>
<ns0:contactTelephoneNumber xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:contactPointId>76330</ns0:contactPointId>
<ns0:telExtensionNumber xsi:nil="1"/>
<ns0:contactEmailAddress>[email protected]</ns0:contactEmailAddress>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:telAreaCode xsi:nil="1"/>
</ns1:item>
<ns1:item xsi:type="ns0:BusinessContactPoints">
<ns0:telCountryCode>44</ns0:telCountryCode>
<ns0:partyId>551837</ns0:partyId>
<ns0:contactPointType>PHONE</ns0:contactPointType>
<ns0:contactTelephoneNumber>323233</ns0:contactTelephoneNumber>
<ns0:bpa>560950</ns0:bpa>
<ns0:contactPointId>76329</ns0:contactPointId>
<ns0:telExtensionNumber xsi:nil="1"/>
<ns0:contactEmailAddress xsi:nil="1"/>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:telAreaCode>123</ns0:telAreaCode>
</ns1:item>
</ns0:businessContactPoints>
<ns0:businessAddresses xsi:type="ns1:vector">
<ns1:item xsi:type="ns0:BusinessAddresses">
<ns0:partyId>551837</ns0:partyId>
<ns0:locality>Kingshurst</ns0:locality>
<ns0:paon>20</ns0:paon>
<ns0:siteUseType>HEADQUATERS_FOR</ns0:siteUseType>
<ns0:locationId>34380</ns0:locationId>
<ns0:townName>Birmingham</ns0:townName>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:saon xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:country>GB</ns0:country>
<ns0:uprn>100070950848</ns0:uprn>
<ns0:dateOfOccupancyAtthisaddr xsi:nil="1"/>
<ns0:streetDescriptor>Acacia Avenue</ns0:streetDescriptor>
<ns0:postcode>B37 6AQ</ns0:postcode>
<ns0:countyName xsi:nil="1"/>
<ns0:usrn xsi:nil="1"/>
</ns1:item>
</ns0:businessAddresses>
</ns0:return>
</ns0:queryBusinessesFindByPartyIdResponse>
</env:Body>
</env:Envelope>
The problem is that I'm trying to transform this message in BPEL/ESB but the mapper does not understand the schema as described in the WSDL and will not let me do 'for-each' or 'if' actions on the collections of addresses for example.
I've tried injecting my own WSDL into the EJB3 web service through annotations, but it will not compile....
Can anybody help????
Thanks
Chris

[SOLVED] Makepkg was unable to build lib32-portaudio.

Okay so i dusted off my old PS2 the other day and decided i wanted to play some old games for nostalgic sake when i came to realize it is still broken. So i looked for a decent emulator and found PCSX2. Now, i had some missing dependencies that needed to be installed and i worked on it for a few hours and got every dependency to install except lib32-portaudio. And don't get me wrong, Iv'e looked both at the PCSX2 website and the Arch wiki and forums and iv'e googled and looked at Ubuntu forums and whatnot. I looked everywhere i could think of, and i can't find anything at all on this issue so i'm hoping someone will be able to help me here. I guess the relevant part of the error message that i get is this:
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/../../../libjack.so when searching for -ljack
/usr/bin/ld: skipping incompatible /usr/lib/libjack.so when searching for -ljack
/usr/bin/ld: cannot find -ljack
collect2: ld returned 1 exit status
make: *** [lib/libportaudio.la] Error 1
Aborting...
==> ERROR: Makepkg was unable to build lib32-portaudio.
And Iv'e re-installed portaudio at least 3 times since i figured the error had something to do with it. Through pacman, downloading the package from the dev website, and even trying the Ubuntu repos and it seems to be successfully installed each time. I'm fairly new to Linux but i'm a very persistent person and i wouldn't give up without at least a days worth of pulling out my hair in frustration, and through trial and error, so as far as my knowledge reaches, iv'e tried my best to solve it on my own. Oh, and i'm building/installing from the AUR if that would make a difference. Appreciate any help.
edit
Been a long time, with no help, but i finally gave it another go. This time successfull! I just recently re-installed Arch, this time running openbox, and without any issues whatsoever, it installed on the first try. I think i had a shitload of conflicting and missing dependencies on my last install and that's what caused it.. I don't know if this will help anyone if you ever run in to this problem, there isn't much to add, Only thing is that I'm running a clean install and i use the nvidia driver and nvidia-utils, and all the ALSA sound drivers and utilities. Oh and i'm running openbox as a stand-alone WM. That's all the relevant info i think. Now i'm looking forward to configuration hell for the games i'm gonna run, haha!
Last edited by waspy (2011-05-26 18:42:23)

ChoK wrote:It seems like you need lib32-jack and the maintainer of lib32-portaudio forgot to add it to makedepends/depends
Iv'e got lib32-jack already installed. And by reading the comments of the AUR link to the package ( lib32-portaudio ) they supposedly fixed the PKGBUILD too.

[SOLVED] Can't build lib32-libwbclient

Hello.
I need lib32-libwbclient for some wine game to work, but it depends on libwbclient. Current libwbclient version is 3.6.11.1 while lib32-libwbclient version in AUR is 3.6.10.1. That lead to an error during building lib32-libwbclient so I downloaded libwbclient 3.6.10.1 pkg.tar.xz to overcome this problem and it worked. But when I'm trying to build lib32-libwbclient using yaourt I get this error:
sudo yaourt -S lib32-libwbclient
==> Downloading lib32-libwbclient PKGBUILD from AUR...
x PKGBUILD
lib32-libwbclient 3.6.10-1
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> lib32-libwbclient dependencies:
- lib32-glibc (already installed)
- libwbclient=3.6.10-1 (already installed)
==> Continue building lib32-libwbclient ? [Y/n]
==> -------------------------------------------
==>
==> Building and installing package
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Tworzę pakiet: lib32-libwbclient 3.6.10-1 (nie, 27 sty 2013, 14:19:58 CET)
==> Sprawdzanie zależności potrzebnych do uruchomienia...
==> Sprawdzanie zależności potrzebnych do budowy...
==> Pobieranie źródeł...
-> Pobieram libwbclient-3.6.10-1-i686.pkg.tar.xz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:02 --:--:-- 0
curl: (78) RETR response: 550
==> BŁĄD: Błąd podczas pobierania libwbclient-3.6.10-1-i686.pkg.tar.xz
Przerywam...
==> ERROR: Makepkg was unable to build lib32-libwbclient.
==> Restart building lib32-libwbclient ? [y/N]
I don't know how to get it right. Can anyone help me? Thanks in advance.
Last edited by killyou (2013-01-27 21:29:50)

Did it? Still getting 550 on lib32-libwbclient.
==> Downloading lib32-libwbclient PKGBUILD from AUR...
x PKGBUILD
Comment by timofonic (2013-04-22 19:13)
Edit lib32-libbsd PKGBUILD with $EDITOR? [Y/n] n
== Making package: lib32-libbsd 0.4.2-1 (Mon Apr 22 21:11:14 CEST 2013)
== Checking runtime dependencies...
warning: config file /etc/pacman.conf, line 19: directive 'SyncFirst' in section 'options' not recognized.
== Checking buildtime dependencies...
== Retrieving sources...
- Found libbsd-0.4.2.tar.gz
== Validating source files with md5sums...
libbsd-0.4.2.tar.gz ... Passed
== Extracting sources...
- Extracting libbsd-0.4.2.tar.gz with bsdtar
bsdtar: Failed to set default locale
== Removing existing pkg/ directory...
== Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... no
configure: error: in `/tmp/packerbuild-0/lib32-libbsd/lib32-libbsd/src/libbsd-0.4.2':
configure: error: C compiler cannot create executables
See `config.log' for more details
== ERROR: A failure occurred in build().
Aborting...
The build failed.
Dependencies for `lib32-libwbclient' are not met, not building...
Comment by muttonhead (2013-05-15 18:09)
4.0.5-3 Should be the version, 4.0.5-1 is no longer available.
Comment by pavel.bazika (2013-05-21 22:25)
Now it should be 4.0.5-4, works after manual update.
Comment by Youpi (2013-08-06 20:46)
up to 4.0.8
Comment by teky (2013-08-18 10:47)
Working solution atm.
# AUR packages should not be built from binaries. This is a
# workaround. If you manage to build this lib32 package from
# source, let the maintainer know and you will be helping the
# Arch community.
_pkgbase=libwbclient
pkgname=lib32-${_pkgbase}
pkgver=4.0.8
pkgrel32=1
pkgrel=1
pkgdesc="Samba winbind client library (32 bits)"
arch=('x86_64')
url="http://www.samba.org"
license=('GPL3')
depends=('lib32-libbsd' "${_pkgbase}=${pkgver}")
source=("ftp://ftp.archlinux.org/extra/os/i686/${_pkgbase}-${pkgver}-${pkgrel32}-i686.pkg.tar.xz")
md5sums=('9747e744f5d6c5bea05e98656ef193c6')
package() {
mkdir -p "${pkgdir}"/usr/lib32
cp -rPf "${srcdir}"/usr/lib/* "${pkgdir}"/usr/lib32
sed -i 's#/usr/lib#32#' "${pkgdir}"/usr/lib32/pkgconfig/wbclient.pc
lib32-libwbclient 4.0.9-1 (Sat Mar 3 19:48:50 CST 2012)
This package is orphaned
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> lib32-libwbclient dependencies:
- lib32-libbsd (already installed)
- libwbclient=4.0.9 (already installed)
==> Continue building lib32-libwbclient ? [Y/n]
==> -------------------------------------------
==>
==> Building and installing package
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Making package: lib32-libwbclient 4.0.9-1 (Mon Oct 14 04:38:12 CDT 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading libwbclient-4.0.9-1-i686.pkg.tar.xz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
curl: (78) RETR response: 550
==> ERROR: Failure while downloading libwbclient-4.0.9-1-i686.pkg.tar.xz
Aborting...
==> ERROR: Makepkg was unable to build lib32-libwbclient.
==> Restart building lib32-libwbclient ? [y/N]
==> ------------------------------------------
==>

Problem building schema on WSDL for Partnerlink

Hi,
We use PL/SQL webservices, which are being generated with JDeveloper. As long as it contains single Object Types, there's no problem with defining the WS as Partnerlink and using it.
However, we've made one service that returns several occurrences (array). That shouldn't be a problem. But, ... I can define the partnerlink on the basis of the WSDL, but when I try to access the variables it generates with it, i get an exception with the following message: Problem building schema. Detailed node information shows: 'Invalid reference: 'http://schemas.xmlsoap.org/soap/encoding/:Array'


     <definitions name="aanvraagWS" targetNamespace="http://nl/nak/aanvraagService/aanvraagWS.wsdl">
     <types>
     <schema targetNamespace="http://nl.nak.services/AanvraagWS.xsd">
     <complexType name="nl_nak_services_AvrgAvrgOtUser" jdev:packageName="nl.nak.services">
     <all>
<element name="id" type="decimal"/>
<element name="oogstjaar" type="decimal"/>
<element name="aanvraagNummer" type="decimal"/>
<element name="rleId" type="decimal"/>
<element name="kotId" type="decimal"/>
<element name="aantalVerpakkingen" type="decimal"/>
<element name="verpakkingsvorm" type="string"/>
<element name="totaalGewicht" type="decimal"/>
<element name="indBemonsterdNaDrogen" type="string"/>
<element name="partijnummerHandelaar" type="string"/>
<element name="opmerkingen" type="string"/>
<element name="datumBemonstering" type="dateTime"/>
<element name="plombenummer" type="string"/>
<element name="indSpoedonderzoek" type="string"/>
<element name="bemonsterdDoor" type="string"/>
<element name="pdtId" type="decimal"/>
<element name="procesInstanceId" type="decimal"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_addaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="paanvraagotInout" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AvrgServiceBerichtOtUser" jdev:packageName="nl.nak.services">
     <all>
<element name="serviceCode" type="decimal"/>
<element name="serviceBericht" type="string"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_getaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="paanvraagotOut" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_findaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="paanvraagotOut" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AvrgWngOtUser" jdev:packageName="nl.nak.services">
     <all>
<element name="id" type="decimal"/>
<element name="wmrId" type="decimal"/>
<element name="prrId" type="decimal"/>
<element name="avrgId" type="decimal"/>
<element name="waardeNumeriek" type="decimal"/>
<element name="waardeAlfanumeriek" type="string"/>
<element name="datumUitvoering" type="dateTime"/>
<element name="uitvoerder" type="string"/>
<element name="istId" type="decimal"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_addwaarneming_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingotInout" type="ns1:nl_nak_services_AvrgWngOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_getwaarneming_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingotOut" type="ns1:nl_nak_services_AvrgWngOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_findwaarneming_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingotInout" type="ns1:nl_nak_services_AvrgWngOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_listwaarnemingperaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingctOut" type="ns1:nl_nak_services_AvrgWngCt"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AvrgWngCt" jdev:packageName="nl.nak.services">
     <all>
<element name="array" type="ns1:ArrayOfnl_nak_services_AvrgWngOtUser"/>
</all>
</complexType>
     <complexType name="ArrayOfnl_nak_services_AvrgWngOtUser">
     <complexContent>
     <restriction base="SOAP-ENC:Array">
<attribute ref="SOAP-ENC:arrayType" wsdl:arrayType="ns1:nl_nak_services_AvrgWngOtUser[]"/>
</restriction>
</complexContent>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_listwaarnemingperwerkmonster_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingctOut" type="ns1:nl_nak_services_AvrgWngCt"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
</schema>
</types>
     <message name="addaanvraag0Request">
<part name="xxpAanvraagOt_inoutxx" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
</message>
     <message name="addaanvraag0Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_addaanvraag_Out"/>
</message>
     <message name="getaanvraag1Request">
<part name="pAanvraagid" type="xsd:decimal"/>
</message>
     <message name="getaanvraag1Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_getaanvraag_Out"/>
</message>
     <message name="findaanvraag2Request">
<part name="pOogstjaar" type="xsd:decimal"/>
<part name="pAanvraagNummer" type="xsd:decimal"/>
</message>
     <message name="findaanvraag2Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_findaanvraag_Out"/>
</message>
     <message name="addwaarneming3Request">
<part name="xxpWaarnemingOt_inoutxx" type="ns1:nl_nak_services_AvrgWngOtUser"/>
</message>
     <message name="addwaarneming3Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_addwaarneming_Out"/>
</message>
     <message name="getwaarneming4Request">
<part name="pWerkmonsterId" type="xsd:decimal"/>
<part name="pAanvraagId" type="xsd:decimal"/>
<part name="pBepalingId" type="xsd:decimal"/>
</message>
     <message name="getwaarneming4Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_getwaarneming_Out"/>
</message>
     <message name="findwaarneming5Request">
<part name="xxpWaarnemingOt_inoutxx" type="ns1:nl_nak_services_AvrgWngOtUser"/>
</message>
     <message name="findwaarneming5Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_findwaarneming_Out"/>
</message>
     <message name="listwaarnemingperaanvraag6Request">
<part name="pAanvraagId" type="xsd:decimal"/>
</message>
     <message name="listwaarnemingperaanvraag6Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_listwaarnemingperaanvraag_Out"/>
</message>
     <message name="listwaarnemingperwerkmonster7Request">
<part name="pWerkmonsterId" type="xsd:decimal"/>
</message>
     <message name="listwaarnemingperwerkmonster7Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_listwaarnemingperwerkmonster_Out"/>
</message>
     <portType name="AanvraagWSPortType">
     <operation name="addaanvraag">
<input name="addaanvraag0Request" message="tns:addaanvraag0Request"/>
<output name="addaanvraag0Response" message="tns:addaanvraag0Response"/>
</operation>
     <operation name="getaanvraag">
<input name="getaanvraag1Request" message="tns:getaanvraag1Request"/>
<output name="getaanvraag1Response" message="tns:getaanvraag1Response"/>
</operation>
     <operation name="findaanvraag">
<input name="findaanvraag2Request" message="tns:findaanvraag2Request"/>
<output name="findaanvraag2Response" message="tns:findaanvraag2Response"/>
</operation>
     <operation name="addwaarneming">
<input name="addwaarneming3Request" message="tns:addwaarneming3Request"/>
<output name="addwaarneming3Response" message="tns:addwaarneming3Response"/>
</operation>
     <operation name="getwaarneming">
<input name="getwaarneming4Request" message="tns:getwaarneming4Request"/>
<output name="getwaarneming4Response" message="tns:getwaarneming4Response"/>
</operation>
     <operation name="findwaarneming">
<input name="findwaarneming5Request" message="tns:findwaarneming5Request"/>
<output name="findwaarneming5Response" message="tns:findwaarneming5Response"/>
</operation>
     <operation name="listwaarnemingperaanvraag">
<input name="listwaarnemingperaanvraag6Request" message="tns:listwaarnemingperaanvraag6Request"/>
<output name="listwaarnemingperaanvraag6Response" message="tns:listwaarnemingperaanvraag6Response"/>
</operation>
     <operation name="listwaarnemingperwerkmonster">
<input name="listwaarnemingperwerkmonster7Request" message="tns:listwaarnemingperwerkmonster7Request"/>
<output name="listwaarnemingperwerkmonster7Response" message="tns:listwaarnemingperwerkmonster7Response"/>
</operation>
</portType>
     <binding name="AanvraagWSBinding" type="tns:AanvraagWSPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
     <operation name="addaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="addaanvraag0Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="addaanvraag0Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="getaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="getaanvraag1Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="getaanvraag1Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="findaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="findaanvraag2Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="findaanvraag2Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="addwaarneming">
<soap:operation soapAction="" style="rpc"/>
     <input name="addwaarneming3Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="addwaarneming3Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="getwaarneming">
<soap:operation soapAction="" style="rpc"/>
     <input name="getwaarneming4Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="getwaarneming4Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="findwaarneming">
<soap:operation soapAction="" style="rpc"/>
     <input name="findwaarneming5Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="findwaarneming5Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="listwaarnemingperaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="listwaarnemingperaanvraag6Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="listwaarnemingperaanvraag6Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="listwaarnemingperwerkmonster">
<soap:operation soapAction="" style="rpc"/>
     <input name="listwaarnemingperwerkmonster7Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="listwaarnemingperwerkmonster7Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
</binding>
     <service name="aanvraagWS">
     <port name="AanvraagWSPort" binding="tns:AanvraagWSBinding">
<soap:address location="http://nak3.nak.nl:7779/aanvraagService/AanvraagWS"/>
</port>
</service>
</definitions>

Well, the problem is caused by the fact that BPEL does not yet support soapenc:Array types. We've created a workaround by defining two Services, one that has only single returntypes and one that has the multiple returntypes (which are defined using soapenc:Array). There are other solutions, but those are very complicated. Hope this helps!

PROBLEM BUILDING WSDL USING JDEV BPEL DESIGNER

I have a WSDL that has been generated for MS SQLServer stored proc. I have created SOAP request using XML Spy and posted request to server succesfully.
Imported the same WSDL and created Partner Link in BPEL process successfully but When i try to assign values to Input variable (XSD), I am getting Error : Problem Building Schema.
Then I clicked on check box for details, it shows :
Exception: Invalid reference: 'http://www.w3.org/2001/XMLSchema:schema'
I appreciate any help in this.
Thanks.
Here WSDL file :
<?xml version="1.0"?>

<wsdl:definitions xmlns:tns="http://DWLV06ENG030/Deleteme/deleteme" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:sql="http://schemas.microsoft.com/SQLServer/2001/12/SOAP" xmlns:sqltypes="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types" xmlns:sqlmessage="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage" xmlns:sqlresultstream="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream" name="deleteme" targetNamespace="http://DWLV06ENG030/Deleteme/deleteme">
     <wsdl:types>
          <xsd:schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:simpleType name="nonNegativeInteger">
                    <xsd:restriction base="xsd:int">
                         <xsd:minInclusive value="0"/>
                    </xsd:restriction>
               </xsd:simpleType>
               <xsd:attribute name="IsNested" type="xsd:boolean"/>
               <xsd:complexType name="SqlRowSet">
                    <xsd:sequence>
                         <xsd:element ref="xsd:schema"/>
                         <xsd:any/>
                    </xsd:sequence>
                    <xsd:attribute ref="sqltypes:IsNested"/>
               </xsd:complexType>
               <xsd:complexType name="SqlXml" mixed="true">
                    <xsd:sequence>
                         <xsd:any/>
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:simpleType name="SqlResultCode">
                    <xsd:restriction base="xsd:int">
                         <xsd:minInclusive value="0"/>
                    </xsd:restriction>
               </xsd:simpleType>
          </xsd:schema>
          <xsd:schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/>
               <xsd:complexType name="SqlMessage">
                    <xsd:sequence minOccurs="1" maxOccurs="1">
                         <xsd:element name="Class" type="sqltypes:nonNegativeInteger"/>
                         <xsd:element name="LineNumber" type="sqltypes:nonNegativeInteger"/>
                         <xsd:element name="Message" type="xsd:string"/>
                         <xsd:element name="Number" type="sqltypes:nonNegativeInteger"/>
                         <xsd:element name="Procedure" type="xsd:string"/>
                         <xsd:element name="Server" type="xsd:string"/>
                         <xsd:element name="Source" type="xsd:string"/>
                         <xsd:element name="State" type="sqltypes:nonNegativeInteger"/>
                    </xsd:sequence>
                    <xsd:attribute ref="sqltypes:IsNested"/>
               </xsd:complexType>
          </xsd:schema>
          <xsd:schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/>
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage"/>
               <xsd:complexType name="SqlResultStream">
                    <xsd:choice minOccurs="1" maxOccurs="unbounded">
                         <xsd:element name="SqlRowSet" type="sqltypes:SqlRowSet"/>
                         <xsd:element name="SqlXml" type="sqltypes:SqlXml"/>
                         <xsd:element name="SqlMessage" type="sqlmessage:SqlMessage"/>
                         <xsd:element name="SqlResultCode" type="sqltypes:SqlResultCode"/>
                    </xsd:choice>
               </xsd:complexType>
          </xsd:schema>
          <xsd:schema targetNamespace="http://DWLV06ENG030/Deleteme/deleteme" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/>
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage"/>
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream"/>
               <xsd:element name="sp_deleteme">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element minOccurs="0" maxOccurs="1" name="name" type="xsd:string" nillable="true"/>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
               <xsd:element name="sp_deletemeResponse">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element minOccurs="1" maxOccurs="1" name="sp_deletemeResult" type="sqlresultstream:SqlResultStream"/>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="sp_deletemeIn">
          <wsdl:part name="parameters" element="tns:sp_deleteme"/>
     </wsdl:message>
     <wsdl:message name="sp_deletemeOut">
          <wsdl:part name="parameters" element="tns:sp_deletemeResponse"/>
     </wsdl:message>
     <wsdl:portType name="SXSPort">
          <wsdl:operation name="sp_deleteme">
               <wsdl:input message="tns:sp_deletemeIn"/>
               <wsdl:output message="tns:sp_deletemeOut"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="SXSBinding" type="tns:SXSPort">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="sp_deleteme">
               <soap:operation soapAction="http://DWLV06ENG030/Deleteme/deleteme/sp_deleteme" style="document"/>
               <wsdl:input>
                    <soap:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="deleteme">
          <wsdl:port name="SXSPort" binding="tns:SXSBinding">
               <soap:address location="http://DWLV06ENG030/Deleteme/deleteme"/>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>

Hi,
i tried a bit with your xsds in the wsdl. The only way to get jdeveloper work with the xsd is to put them in one file (see below). Another way is perhaps using 4 files with real imports and location attributes...
Like you see, i had to change the xmlns:xsd to xmlns.
<schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:this="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<simpleType name="nonNegativeInteger">
<restriction base="int"/>
</simpleType>
<attribute name="IsNested" type="boolean"/>
<complexType name="SqlRowSet">
<sequence>
<element ref="schema"/>
<any/>
</sequence>
<attribute ref="IsNested"/>
</complexType>
<complexType name="SqlXml" mixed="true">
<sequence>
<any/>
</sequence>
</complexType>
<simpleType name="SqlResultCode">
<restriction base="int"/>
</simpleType>
<complexType name="SqlMessage">
<sequence minOccurs="1" maxOccurs="1">
<element name="Class" type="this:nonNegativeInteger"/>
<element name="LineNumber" type="this:nonNegativeInteger"/>
<element name="Message" type="string"/>
<element name="Number" type="this:nonNegativeInteger"/>
<element name="Procedure" type="string"/>
<element name="Server" type="string"/>
<element name="Source" type="string"/>
<element name="State" type="nonNegativeInteger"/>
</sequence>
<attribute ref="IsNested"/>
</complexType>
<complexType name="SqlResultStream">
<choice minOccurs="1" maxOccurs="unbounded">
<element name="SqlRowSet" type="this:SqlRowSet"/>
<element name="SqlXml" type="this:SqlXml"/>
<element name="SqlMessage" type="this:SqlMessage"/>
<element name="SqlResultCode" type="this:SqlResultCode"/>
</choice>
</complexType>
<element name="sp_deleteme">
<complexType>
<sequence>
<element minOccurs="0" maxOccurs="1" name="name" type="string" nillable="true"/>
</sequence>
</complexType>
</element>
<element name="sp_deletemeResponse">
<complexType>
<sequence>
<element minOccurs="1" maxOccurs="1" name="sp_deletemeResult"
type="this:SqlResultStream"/>
</sequence>
</complexType>
</element>
</schema>

Problems building a stand alone application with LV 8.6.1.

I'm having problems building a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed. For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
Thank you,

are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution.........
Message Edited by Anil Reddy on 09-25-2009 01:22 PM
Anil Punnam
CLD
LV 2012, TestStand 4.2..........

I have the problem described in /forums/knowledge-base-articles/704725. (Firefox is already running but not responding). My only solution is to use Task Manager to end the firerfox process. I am the only user and there are no other profiles on my system

Occasionally I have the problem discussed in /forums/knowledge-base-articles/704725 , Firefox is already running. My only fix is to use Task Manager to end the firefox process. At such tmes, I have no other instances running.

'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
This is not a cure but will make it easier if Firefox locks up.

Error "Problem building schema" while invoking external webservice

Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....

Hi,
I have given this URL 'http://ws.cdyne.com/WeatherWS/Weather.asmx?WSDL'.
Now it is showing the following error
Exception occured in library handler.Not implemented.
Exception of class CX_SIDL_INTERNAL_ERROR
Please have a look into it
Regards,
Dhana

Problem building schema in provider ABCS

Hi
I imported AccountWSEndPointCRMOnDemand from AIA_HOME\PIP to my jdeveloper(10.1.3.4).but i am getting problem building schema error for one of the partnerlinks.nothing is getting dispalyed if i click on 'show detailed node information'.
I took that wsdl & created a sample bpel which works perfectly fine but with the actual PIP bpel its not working.I pasted the link in IE, it shows the contents corretly.
Please advice!
Thanks

The accountAdapter.wsdl contents is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<definitions
targetNamespace="urn:crmondemand/ws/account/10/2004"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:crmondemand/ws/account/10/2004"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<import namespace="urn:crmondemand/ws/account/10/2004" location="http://host:port/AIAComponents/ApplicationObjectLibrary/CRMOD/ODR15/wsdls/account.wsdl"/>
<plnk:partnerLinkType name="Default_Binding_Account_PL">
<plnk:role name="Default_Binding_Account_Role">
<plnk:portType name="tns:Default_Binding_Account"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
wherein account.wsdl has xsd info which is working fine in the browser.
Also which checkbox i need to check in jdeveloper to see the error details.

Partnerlink - Problem building schema

Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....

Hello,
please be careful with the "Problem building schema"-error not to mix up the reasons. As far as I know this error can be caused by different ways, e. g. schema is not valid, wsdl is not accesible...
Therefore please check at first of a local copy of the wsdl is working or not. In lather case there might be a trouble in the wsdl, more preciously in type definition.
@Ruerd: If you want I can have a look at your wsdl to see if it is valid - just post the code here.
BR,
Hansi

Problem building record set using Dreamweaver CS6 Cloud Product

I am having a problem building a Results Page using Dreamweaver CS6. I have followed all the steps described in Dreamweaver/Build Search and Results Page Article (multiple times). It seems that when I save the Results page it does not copy the php used to build the dynamic table. In fact when I view the source, I do not see any php code.
Additionally, when I attempt to bind the record set, it also does not accept the Default Value(s). Enstead it gives me a list of all data in the colum(s) chosen for the record set (using Where..LIKE..variable definition).
Any suggestions?
Regards,
Norv

Yes, I will be glad to go through each step. I will also provide code.
Step 1: Built the Search Page by adding Form into exisitng htm page. Used Insert> Form>Form to insert Form area. Then added three (3) text fields using Text Icon from the Form Menu Bar (Classic View).
Step 2: Added a Submit and Reset Button to the Search Page. Again used the Form Menu Bar to create the Buttons.
Step 3: Selecte the <form> tag at bottom of Document Window to point Form to the Results Page (using the Action Box.
Saved page and then began building the Results Page using an existing htm page. Saved the Results Page as a .php document.
Results Page: Here are steps taken to build Results Page (Code will follow):
1/ On the Results Page created a Recordset using the bindings dialog box. Used the Advanced Recordset Dialog Box. In the Advanced Dialog Box I used the Select and Where features to create a Recordset that created a 3 column table (records.County, records.ListPrice, records.PropertyType). In the Variable box I created 3 variables (varCounty, varListPrice, varPropertyType). varCounty and varPropertyType parameters are text (Type) and % (for Default Value). varListPrice parameters are floating point (type) and % (for Default Value). RunTime Value is $_REQUEST["ColumnName"].
Here is the Code generated by Dreamweaver. Note, I am not including the code to access the database, because in all tests I am able to access the table. In fact first time I built the dynamic table, everything worked and I saw the Colum and default value. Have never been able to duplicate that effort. :-)
Here is code:
<?php
if (!function_exists("GetSQLValuestring")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION<6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "defined"
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$varCounty_rslistings = "%";
if (isset($_GET["County"])) {
$varCounty_rslistings = $_Get["County"];
$varListPrice_rslistings = "%";
if (isset($_GET["ListPrice"])) {
$varListPrice_rslistings = $_GET["ListPrice"];
$varPropertyType_rslistings = "%";
if (isset($_GET["PropertyType"])); {
$varPropertyType_rslistings = $_GET["PropertyType"];
mysql_select_db($database_MyDB, $MyDB);
$query_reslistings = sprintf("SELECT records.County, records.ListPrice, records.PropertyType FROM records WHERE records.County LIKE %s AND records.ListPrice LIKE %s AND records.PropertyType LIKE %s", GetSQLValueString($varCounty_rslistings, "text"),GetSQLValueString($varListPrice_rslistings,"double"),
GetSQLValueString($varPropertyType_rslistings,"text"));
$rslistings = mysql_query($query_rslistings, $MyDB) or die(mysql_error());
$row_rslistings = mysql_fetch_assoc($rslistings);
$totalRows_rslistings = mysql_num_rows($rslistings);
?>
That's the code that was generated by Dreamweaver.
Thanks in advance for your assistance

Bpel variables return Http 503 (problem building schema) error

First of all if I have posted this in the wrong forum, I apologise in advance.
I have recently installed the Oracle SOA suite and I have downloaded JDeveloper 10.1.3.3, I am running the (http://download.oracle.com/otndocs/products/bpel/orderbooking.pdf) Oracle® BPEL Process Manager Tutorial and when attempting to create a copy rule I have noticed that some of my variables return the following error:
Exception - Problem building schema
expanded error:
Exception: Server returned HTTP response code: 503 for URL: http://MYID.MYDOMAIN.com:80/orabpel/default/CreditRatingService/CreditRatingService?wsdl
I can access the WSDL directly and it is visible in my Bpel console window too, yet JDeveloper seems to be having trouble with it. I have setup an integration server connection to the BPEL server and from there, when I attempt to validate WSDL I don't get any problems.
I was wondering if anyone could help as this has got me stuck and I can't continue any further.
Edited by: Saheem on Jun 8, 2009 3:33 PM

Disable the proxy settings in JDeveloper.
Marc

Exception:Problem building schema

Hi all,
I want to make a web service call to a service deployed in weblogic, I copied the wsdl to a local file and I created a PartnerLink referring to the wsdl in my local file. I put an Invoke action, create an input variable, everything work fine. However when I try to explore the input variable I got exception:Problem building schema.
Is there anything wrong with the WSDL? I've validate it and it was ok.
Thanks in advance,
santoso
Here is the WSDL of the service:
<?xml version='1.0' encoding='UTF-8'?>
<definitions name="ProposalWSServiceDefinitions" targetNamespace="http://com/my/ws" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://www.my.com/opl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.my.com/opl">
<complexType name="Proposal">
<sequence>
<element name="id" type="int"/>
<element name="title" type="string"/>
<element name="creator" type="string"/>
<element name="status" type="string"/>
<element name="customerId" type="int"/>
</sequence>
</complexType>
<element name="ProposalData" type="tns:Proposal"/>
</schema>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://com/my/ws" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="insertProposal">
<xs:complexType>
<xs:sequence>
<xs:element name="proposal" type="opl:Proposal" xmlns:opl="http://www.my.com/opl"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</types>
<message name="insertProposal">
<part element="s0:insertProposal" name="parameters"/>
</message>
<portType name="ProposalWS">
<operation name="insertProposal" parameterOrder="parameters">
<input message="s0:insertProposal"/>
</operation>
</portType>
<binding name="ProposalWSServiceSoapBinding" type="s0:ProposalWS">
<s1:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="insertProposal">
<s1:operation soapAction="" style="document"/>
<input>
<s1:body parts="parameters" use="literal"/>
</input>
</operation>
</binding>
<service name="ProposalWSService">
<port binding="s0:ProposalWSServiceSoapBinding" name="ProposalWSSoapPort">
<s1:address location="http://172.16.208.45:7001/SBSWebService/ProposalWS"/>
</port>
</service>
</definitions>

I've solved it just by upgrading to BPEL 10.1.3.1 (was 10.1.2.0)

Problems building lib32-gstreamer0.10-base

Similar Messages

Maybe you are looking for