Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
Have tried with Cyberlink removed from machine.... same problem.
Any suggestions??

The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size. It was set-up with simple "Play menu". It burns up to the point of finalization, then the above error message occurs.
I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message. Also tried different brand of discs.
I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud. CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
It seems to be a problem with the Creative Cloud installation on the first computer???

Similar Messages

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

How do I burn BLU-RAY DVDS from my iMacs?

I own a video production company and we can burn dvds in compressor, but we can't figure out how to setup a menu with multiple tracks to select different options. Like a menu page. Does anyone know how to do this on a Mac or by using an optional software?
A couple times compressor has gave us errors on burning a normal mov clip to Blu Ray, so if you recomeend or know any other softwares or even if I have to purchase a PC just to burn Blu Ray DVD's, can you please help me.

Does anyone know how to do this on a Mac or by using an optional software?
I do this using iDVD which is no longer available from Apple, but still available as part of iLife 09 and 11 versions from online vendors. You can either use Chapters or (my preference) simply import your videos as separate movies which will then show up as separate entities in the menu (and selectable separately).
FWIW, Macs do not support burning or playing blu-ray without additional software (and a blu-ray burner) - Roxio Toast is one that will work.

Where are the default libraries for Encore CS6 Creative Cloud?

Where are the default libraries for Encore CS6 Creative Cloud? I just installed, opened a new project and don't see any like I had with previous versions. Is there a separate install for this, was it removed from CS6 or was it removed from CS6 Creative Cloud?

go read this and tell me what you think:
http://forums.adobe.com/thread/1029098

Creating Blu-Ray DVD with Final Cut Pro and Adobe Encore

Hi all,
I am one of many with troubles creating a blu-ray DVD using Mac software. Sounds like the best way to do this is to do all of the editing in Final cut and create the DVD in Adobe Encore. Is there a way to export to Adobe Encore or should I just create a .mov file and import that to Encore. That way I think I lose the HD quality. I read that I could compress to Blu-ray format in Compressor, but I can only find HD DVD which is different. When I select create a Blu-Ray disc, Compressor won't simply create the file on my computer...it wants the disc to create.
Maybe I am a little to new at this to fully understand, but why in the heck doesn't Apple get with the times and create a DVD authoring program that makes Blu-Ray?
Thanks for any help you can offer.

I have just completed my first blu-ray disc using FCP7 and Adobe encore. My workflow, once the timeline was complete, was to go to File>share>choose blu-ray as destination >export. The default encoding is H.264 along with an ac3 file for audio. It took 3 hours and 35 minutes to encode the 1hr 26 minute file.
Opening encore, confirming you settings for HD, and choosing file>import>as asset each of the files (separately, of course). Encore imports them, then under Timeline>create new, then drag the files to the timeline. CLick on the build button and you are there. I did not mention that my original render was Prores422, but that should not matter here. No trouble with burning the Verbatim 25Gb disc.
Encore will recognize that these files do not need re-encoding and burn the disc. It took 1 hour and 40 minutes to burn a 1 hour and 26 minute (17+ Gb) movie on an i7 iMac with an OWC 12x BD burner.
Hope that helps

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

Quicktime settings for future transcode to Blu-Ray & DVD in Encore

Hi, I'm asking this here because I think this is where the best knowledge on the subject is. I'm making a slideshow video in Fotomagico that I hope to author to Blu-Ray and DVD in Adobe Encore. I know that it will have to be transcoded in Encore so I'm wondering what will be the best output settings when I make the original video file in Quicktime. This has been created at 1920x1080, 60fps
Some specific options that have me confused:
Frame rate: leave at 60 or not. From my understanding, blu-ray 1080p is 23.97fps and DVD is 29.97?
Compression codec: Options include AIC, ProRes, MPEG-4, H-264, etc. I have no idea what will work best?
Or, should I send a file that doesn't need transcoding? Encore calls these elementary streams and apparently they have to match Blu-Ray/DVD spec and have no audio in the file. Is there a way to make this (I assume H-264 or MPEG-2) in Quicktime?
Thanks for any tips!!!

Hey Hoffsta,
yesterday i was looking for bluray edition and i found this can be usefull i hope:
http://www.kenstone.net/fcphomepage/blu-ray_fcpfields.html
Flo

Encore crashes when trying to burn Blue Ray DVD.

Using Encore CS4 in a Vista Ultimate 64 bit PC with 4GB Ram.
Using Dynamic link from Premiere Pro CS4 with an AVCHD movie.
Transacodes without a hitch and when ready to burn get program error.
Using a Plextor BD-R PX-B900A ATA drive. ROXIO media creator 10 gas no problem writing to it either BDs or DVDs.
Encore write just fine using DVDs, it's just Blue Ray that has the problem.
Any Suggections?

Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

How to burn Blu-ray disk from Encore?

My project was shot and edited in HD. The camera was a Sony AX2000 1920 X 1080 60i the highest resolution for the camera. The project has been exported to Encore (CS5.5 Production Premium)and is on the timeline there. How do I get in touch with "Chat" to get phone help to go from where I am to burning a Blu-ray disk? When I try to email Adobe Help I am routed round and round back to same place and I can never find anyplace to send an email to Adobe to ask a support question. When I click on "Help" from Premiere Pro or Encore the explanations use frequent links to videos elsewhere for explanations and none of the links are functional! Why is that? I can't find an explanation online or in Adobe's Classroom in a book or anywhere. I would appreciate some links to videos explaining the process or some basic instructions. Thank you.

Encore also has a very active forum too: http://forums.adobe.com/community/encore/encore_general
Good luck,
Hunt

Problem burning Blu ray on mac

I recently bought an external blu ray burner LG from what i gather it works with mac as it shows up when switched on also added a caldigit usb 3.0 pci for mac it shows up and says it is 3.0 the burner uses 3.0 tried to burn last night went through everyting as normal using toast but when it came time to burn got an error saying not a stable connection has anyone ever had this or any similer problems? My mac is an early 2009 Mac Pro with 6 gigs of ram running OS 10.9.1 i am at a loss as to what the problem is any advice would be helpfull thanks.

I had tried that before and worked the same everytime i tried to burn i get an error about not stable connection that is why i picked up the usb 3.0 i am guessing that it could be a firmware update for it could be the problem or maybe it could be not in the right pci port going to give booth a try later and see if any of these work.

Final Cut 7 - problems burning blu ray

Hi
Got my final cut studio upgarde today. Looks quite nice. Having trouble to Share to a blu ray disk. Redering takes quite some time and during create disk the progress goes up to 60% and stops.
I use an LG Bluray burner with a SATA to ATA adaptor. No problems under MAC OS X or Toast.
Any ideas or similar observations?
Regards
Rainer

My bad, it seems I did screw up the machine. I had some recent changes (ie: larger Harddisk, Studio upgrade and more) and besides the Bluray problem I did run into some other issues fe: not being able to shut down, start up problems etc. So I followed the instruction for the reset and voila the issue is resolved, FCP now even renders faster. Sorry I have to say that I am just a MAC user since one year and perhaps with a bit more experience I should have been able to resolve this much quicker.
But since the problem became visible juts after the upgrade I was sure it must have been coming form the software. I "shared" the HDV clip to blue ray, and after the much faster rendering the burning went fine.
Regards
Rainer

Burning blu-ray disks with Archgon

I have a HD camcorder and create home movies of my daugher with FCP X. I have an iMac (late 2012 model I think). I recently purchased the Sea Tech Archgon blu-ray writer super drive with the intent of buring blu-ray disks for the grandparents. The instruction manual for the blu-ray player states "Please purchase and download appropriate blu-ray playback software for Mac OS". My questions are:
1) When I plug in the drive, no icon appears on the desktop. There is power to the unit because it allows me to open and put a disk in.
2) Do I need to purchase Mac Blu-Ray player just for the iMac to see the drive before I can burn any blu-ray disks?
3) I don't intend to use the drive to watch any blu-ray movies. This is strictly for making blu-ray disks that can be popped into a regular blu-ray player so the grandparents and other relatives can enjoy the home movies.
4) Is FCP X an appropriate software, which I already have on my computer? It allows me to create DVD directly from FCP X, but when I tried to do it from FCP X, this drive does not come up as an option.
5) I also have Titanium Toast and purchased the blu-ray upgrade. Then I save the file from FCP as a master on the computer and attempted to burn the blu-ray using Toast. Again, this drive does not come up as an option.

1. Any external burner will only become recognized once you insert media. If you plug it into the Mac and launch Toast, it should show at the bottom of the Toast window. You can choose it and control the drive with Toast - open tray, close tray, insert DVD, etc.
2. No.
4. Not sure re. blu-ray, but try to export it as a .mov or Video_TS folder, then drag either into the Toast window. That is how I proceed using iMovie and/or iDVD. (I only use FCE for special effects/layered intros, etc., export at best quality settings, then use those with iMovie and/or iDVD). You do need software (Toast is best because of the blu-ray plugin) to burn to DVD.
5. Again, the drive should show up at the bottom - see screenshot (mine is only showing my internal Superdrive; once I attach my external burner, both will show up):

PrCS5.5: what are the setting to produce a Blu-Ray disk with Encore CS5

what are the setting for a sequence, media encoder, & Encore to produce a Blue-Ray disk.
At present , I have tried several different combinations, but Encore just hinges

sorry i forgot the link...
http://www.precomposed.com/tutorials/04_bluray_subtitles/
at the end of tutorial , you find instructions for create a right iso image.
Another thing. If you go to create a DVD Dual layer, Imgburn offers a excelent tool to set layer break. I prefer this option,and not Encore automatic option.
You can check other tutorial
How to write a Blu-ray Video disc using ImgBurn
http://forum.imgburn.com/index.php?s=a3f19e39fa1a21b69df15414dc8b7a90&showtopic=9512

Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

Similar Messages

Maybe you are looking for