Problems Burning in Disc in Encore CS4

Hello all,
I just recently upgraded to Adobe Encore CS4 and I'm trying to burn a blu-ray disc but the program is giving me problems.
All of my video assets are .m2v movie clips, which includes the motion menus I am using, compressed to that format in Sorenson Squeeze.
The first time I tried to burn the disc I received an error before it even started to render the menus.  The error was Src\VideoFrameManipulators.cpp-563.  I did some searching and decided to import the quicktime movies of the menus and use the quicktimes instead of .m2v files.  When I tried to build the project again it got through rendering almost all the menus and then I received this error message Src\pp\\PPixHandleUtilities.cpp-114].
After that I tried transcoding each menu video separaretly and that did work, I got the same PPixHandleUtilities error again.  I tried re-importing the files, relinking the files, etc, nothing is working.  I'm at a loss.
I have burned a blu-ray disc already so I don't think it is the drive.
I'm running Windows Vista Business 64-bit as the operating system.
Any thoughts?
Kristin

I too am having problems burning data disks to dvd. While it appeared to burn without problems. It took over an hour sometimes 2 or 3 to burn the dvd which upon completion was not recognized in either my Dell or my Mac. I hooked up my external drive where my music is kept to my Mac and it appears to have burnt correctly readable by both machines and took about ten minutes to burn each dvd. So it appears the Windows version is majorly screwed.

Similar Messages

  • Burn Blu - ray in Encore CS4

    Hey
    Has anyone here burn a blu - ray dics in Encore CS4 ?
    And have there been any problems about playing it on a blu -ray player ?
    Regards
    Mikael
    you can contact me  here :
    [email protected]
    I have burn a blu - ray , but have a problem

    It is normal for a player to briefly pause as it seeks the disc for the menu, transition, or video you are having it load. This is a limitation of the format.
    Normally, a player will freeze the last frame of the previous menu until it loads the next menu or video. This freeze usually lasts 0.5 seconds to 1 second. If your disc was burned too fast, uses too high of a bitrate, had dust or scratches on the surface while burning or playing, this amount of time to seek the disc will increase (and possibly go to a black screen if it can't load it within a second or two).
    The black screen you are experiencing is a player issue, not a menu issue. You might be able to reduce the freeze if you correct any issues you might have had with your disc. If your disc is flawless, then there is nothing you can do. If you try it on a different player, you will likely see a different result.
    Menu content is stored on the disc in a different physical location than timeline content, which will make it take slightly longer to go from a menu to a timeline or vise versa.

  • Blu-ray says capacity too big when burning DVD Rom Folder Encore CS4

    I have tried 3 times now to burn a Blu-ray Image file with a DVD rom Content Folder. The Blu-ray Image size is 45.90gb and the content folder is 1.6gb. The disk is a Sony DL 50gb Blu-ray. I have not tried to burn direct to disk because cost of Blu-rays. I am using Encore CS4. Is it that you cannot make an image file with DVD-rom for DL Blu-rays. Is there a number preset by Adobe for image file size for DL Blu-ray. Please help

    45.90 GB on your hard drive and 1.6 GB on your hard drive add up to 47.60 GB.
    In computer GB, (47.60 x 2^30) that's over 51 billion bytes. Sony and other blank media manufacturers report the capacity of their blank discs in normal GB (50 x 10^9), or 50 billion bytes.
    Your project is too big to fit on the blank media that you have.

  • Re: problem burning multiple discs from iDVD

    I am having a problem burning multiple DVDs. My first DVD burns fine but my second one won't complete the process. It stays in the "BURN PROCESS Current Operation: Writing Lead-Out..." phase for hours without ever completing the burn. I am using good quality Taiyo Yuden 8X DVD-R blank discs. Can anyone offer any advice/solutions? Thanks!

    Hi
    Double Click on the hard disk up righthand side of Your desktop. Often named
    Macintosh HD.
    At the bottom of this new window it reads nn Objects and xx.xx Gb free space.
    Else:
    Not knowing the origin to Your problem - General approach when in trouble is as follows:
    Many possible origins. Most common:
    • Free space on internal (start-up) hard disc if it is less than 10Gb should raher have 25Gb
    • Hard disc is untidy: Repair Permissions, Repair Hard disc (Apple Disc Util tool)
    • Delete iDVD pref file - or rather start a new account - log into this and re-try
    • Program miss-match: iDVD 6.0.3, Mac OS X.4.11 AND QuickTime 7.3 - is OK
    Yours Bengt W

  • "Encode Failed" whilst building disc in Encore CS4

    Hi folks,
    I've built a Premiere Pro CS4 project which, after adding a menu in Encore CS4, I'm trying to output/"Build" a disc from Encore.  The project's assets comprise original AVCHD video from my Sony Handycam and, from these, some After Effects CS4 generated segments (which I first converted from AVCHD to MPEG2 HD using Free HD Converter V1.7).
    Although I've previously produced SD DVDs from PPro2, I'm new to CS4, and working with HD video.
    Q1 - having built a project from AVCHD video, is it possible in theory to export from Encore to MPEG2-DVD (PAL 16:9)
    Q2 - if the answer to Q1 is "yes", do you have any idea why during the build disc process I receive an "Encode Failed" message within a matter of seconds (whilst using export setting MPEG2-DVD PAL High Quality 4Mb VBR 2 Pass in Widescreen 16:9)?
    I'm using Windows 7 Professional 32-bit on a laptop with an Intel Core 2 Duo CPU P9600 @ 2.66GHz, with 4.00 GB RAM.
    Thanks in anticipation!

    For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS 
    Plus, Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0 
    An Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

  • No Blue Ray in CS4 Media Encoder or burn to disc in Encore

    Hello everyone.
    I'm using CS4 on Vista 64 Dual AMD @ 3.0 with 8 gigs memory and 4x WD 750 gig HD's on Raid 1
    ATI 4890
    I had burned previously several Mpeg2 BluRay discs with menus and now have lost that capability it seems.
    I have had some problems in the past and have reloaded Vista 64 as well as this time.
    The media enocder just stops nearly imediately after the que with an exclaimation point
    on the file attempting either a BluRay 264 or Mpeg2 BluRay conversion from mt2s raw from the camera
    file, from the hard drive.
    As well, after an edit of mt2s files on the editor and exporting to Encore, setting it all up with a
    menu etc. It will rendor a project until its time to write or burn and then I get an error about access
    and a code 12 error. I'm using an LG GGW-H20L BlueRay recorder/player. Which has a problem
    doing dual layer writing with it's latest firmware installed.
    I would like to be able to edit, menu and burn my mt2s files to BluRay however after reading here
    and other places recently, it sounds like I need Scenerist or something now to be able to achieve
    this goal.
    Has something change most recently to take away what I have been doing or what I still can do?
    I only make one or two Blue Rays of the same. I'm not into replicating mass quanities of the same.
    I would like to have the better picture the AVCHD camera outputs as mt2s files burned onto a Blue Ray
    disc. It looks better anyway to me than the Mpeg2 BlueRay files.
    Anyone have any ideas?
    Gratefully appreicated. Bob.
    Regular DVD's look great and work just fine but once in a while, someone wants a BlueRay. Impression is all I can
    say about that.

    I don't do BluRay... but...
    When I want to create a single layer DVD I simply click the Encore icon and work (actually, I go to ISO and use Imgburn to write, for greater control)
    When I want to create a dual layer DVD I have found that I MUST right click the Encore icon and select Run as Administrator
    This is in spite of the fact that I am the only user of my computer and only have one, Administrator account
    This problem appears to be "something" about Win7's rights management (this problem, from my reading, started with Vista)

  • Burned a disc in Encore, plays fine on DVD player, but not in Windows Media

    Hi,
    I was just wondering if anyone else has had playback issues in Windows Media Player with DVDs burned in Encore.  We recently produced a 14 minute film that plays skip free and glitch free on any standalone DVD player we test it in, but when we test it in a PC using Windows Media Player at 12 minutes in the picture starts glitching, random artifacts appear distorting what we see.  It doesn't skip, but it does introduce these glitches and artifacts all the way until the end.
    We thought it might be a good idea to play the DVD on a different DVD program, so we used PowerDVD and it plays PERFECTLY.  So, that means it's a Windows Media Player problem.  We tested the DVD on multiple PCs using Windows Media Player and the same thing happens.  We even tested other copies of the DVD and the SAME THING HAPPENS!
    What's most frustrating is that we can't control how people are going to view the film.  We've already had our client come back to us after watching it on his PC using Media Player and ask us why the "movie was skipping."  Obviously, it wasn't skipping, just introducing those weird glitches.  Is there something I can do in Encore to ensure playbackability in Windows Media Player?
    Thanks,
    Steven

    Windows Media Player has undergone some changes over the last several versions. For a period, there was no DVD play at all. It was rumored that MS had removed that, to keep burned pirated commercial DVD's from playing. It is likely that what functions that have been put back into WMP are causing the issues. The issues that you describe sound a bit like some form of attempt to impose "copy protection," onto burned discs. [Just a thought on my part, as I have no facts to back that up.]
    Have not tried any DVD in WMP 12, so have no direct help there.
    As you point out, there is no control as to what software players people will likely use. Not sure how to handle that from your end. Maybe others will have definitive answers, regarding WMP 12, and your exact problem. I would also *guess* that the same would likely happen with any burned DVD, regardless of the software used. Maybe test Burn to Folder and use freeware ImgBurn to experiment?
    Good luck,
    Hunt

  • Having problems burning/creating disc image in iDVD 6

    I am currently experience new problems trying to burn or create a disc image in iDVD 6. I have successfully burned iDVD projects in the past with the same computer/iDVD 6. The iDVD project looks like it is processing normally, even creates a labled disc image- but when you click on it, it reads "My Great DVD", and the video and audio files are also unreadable or absent- the error message for the VIDEO_TS.VOB file I pulled up read, "There is no default application specified to open the document "VIDEO_TS.VOB".
    My older son just got Toast 7 Titanium for me, so I have that resource. I also just bought extra memory to bring me up to 1.25 GB, and an external hard drive with 320 GB. I have a younger son and a friend who will need me to make a dance audition DVD for a CA college dance department that must be in So Cal by 1-19-07, so you can imagine I'm getting a bit nervous about this. I have verified permissions, reinstalled iDVD from the original, and re-done the original iMovie/iDVD project that first caused the problems- a 12.8 GB project (but have not re-done things since I got more memory on my computer). I don't know how big the audition DVD's will be, but estimate they won't be that big (hopefully), but will consist of many short clips/chapter headings. I know just enough about computers to know what I don't know, so would really, really appreciate some basic help!

    My Great DVD", and the video and audio files are also unreadable or absent- the error message for the VIDEO_TS.VOB file I pulled up read, "There is no default application specified to open the document "VIDEO_TS.VOB".
    I don't know what you expect. You're looking for a problem where there isn't one.
    The AUDIO_TS folder SHOULD be empty and (unless you've installed spercial software) you WON'T have any application to open the VIDEO_TS.VOB.
    If you want to play the disk image, open Apple's DVD player application and then use it to open the VIDEO_TS folder.
    This Burning a disk image file on a CD or DVD in Mac OS X at http://docs.info.apple.com/article.html?artnum=93006 is how you burn the disk image you have to writable media.

  • Problem burning a disc

    When I burn an audio disc, I have noticed that some of the tracks have the last 5 to 10 seconds cut off. What could cause this to happen? When I listen to the original track, it sounds fine. The original audio files are all AAC encoded at 128 bit.

    Hi,
    Remember that your PC is still under warranty, if there is a hardware problem with the optical drive, this will be covered so you should contact HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Encore CS4 Blu-Ray not completely compatible?

    So I recently burned a BluRay with Encore CS4.  The disc plays fine on a Playstation 3, it plays fine using ArcSoft Total Media Theatre on the PC.  However, on another computer using Cyberlink's Power DVD software, the disc just plays to a black screen and won't do anything else.  On a Samsung BluRay player, the menu comes up, but none of the buttons are usable, and the player is up to date on firmware.
    Now, this is a "simple" disc just having the one menu with a video background, and the buttons that link to video clips.  Nothing fancy.
    I understand that BluRay players might need firmware updates (and the aforementioned Samsung, while indicating no updates available might still have a firmware issue), but I figured since I wasn't using any of the BluRay advanced features, that wouldn't be an issue.  But then I realized that whether I use the options or not, Encore may well be indicating the disc requires a certain revision of the BluRay spec to play, whether or not the features of that revision are used.
    That lead me to wondering, what revision of the BluRay spec does Encore claim is required, and can you change that on a per-disc basis?  As in, change a setting for my project to indicate BluRay 1.5 is needed rather than 2.0 or something?  It still might not solve some of the issues, as again we're dependent on what the firmware/software does, but I imagine in some circumstances it could help compatibility.
    K.

    But, what I'm describing isn't a problem with the media.  The players acknowledge this is a BDMV disc, but fail to play it properly.  The Cyberlink software shows a black screen, but shows that the menu is currently playing.  For the Samsung set top box, the menu is shown, but doesn't function properly.
    K.

  • 2 BUGS to resolve in Encore CS4 !!!

    Hello,
    1- Error with Blu-ray capacity 23.3GB instead of 25GB.
    Even when we have 500Mo free on blu-ray in Encore CS4 it says error 25 no space on...when burning!
    2- Error when creating MPEG2-DVD with media encoder and importing in Encore CS4.
    We have to delete the file *.MPG.XMPSES before importing the mpeg video.
    Or to move this file in other folder than the DVD project.
    Because the video appear desynchronize in Encore and impossible to burn it: error PGC"...."
    PLS Adobe give us an update or patch.
    Thanks
    Steph (using Adobe since 2000 => I remember about Premiere 5.1 )

    the_wine_snob Thanks i sent these errors...
    Jim Simon I think too, at the beginning an error of GB and MB conversion.
    But the result is there, even with 500 to 1Go free on info disc in Encore CS4.
    it says error 25 no space.
    Thanks
    Steph

  • Encore CS4 Library files missing

    I just noticed that I was unable to see the standard menus or buttons in Encore so I checked the Library folder only to find that it does not exist. Any suggestions as to where this folder should be?
    Thanks!

    Hi,
    I'm new here, but have not found a solution to my problem of no library in Encore CS4.  I found one site that had instructions for those of us who bought the discs (Creative Suite 4 production premium) but I cannot seem to get the disc to work properly.
    The instructions were to put in the first disc go to setup.exe, deselect all items, select Encore, custom install, select Adobe Encore CS4 library, and install.  However, when I put in the disc and tried to deselect all items it would not work.  I could not select nor deselect, only fully install the suite all over again (which I have done 3 times).  Is there some trick to selecting or deselecting?
    Is there anyone with a solution to the library problem or should I try to get Adobe to send me another disc?
    Something strange when installing, I only used application disc 1 & 2, but have application discs 3 & 4 that are not used and seem to not have any exe files or usable files, a content disc that seems to have only a read me pdf file and a learning disc that directs me to websites.
    Any help would be great.
    Nancy

  • TS4062 when trying to burn a disc, I get a message from ITunes saying I have to reinstall it because there are previous programs on the computer that are interfering. How would I know what they are?

    I am having a problem burning a disc with ITunes. I get a message that I have to download the program again as there are some files that didn't download because of another disc burning program. I am sure this is true as I have Media Player and Nero on this computer. What is it that I have to look for or do? I have uninstalled both of these programs. Are there certain files that I have to delete? Please help.
    Also, I have an Ipad and I put the cord into the Ipad and into the computer and now I can't get it out of the IPad. It is really in there tightly. I can get it out of the computer by clicking on safely remove hardware. Why did this happen? It has never happened before.
    I would appreciate any help anyone can give me with these two problems. Thank you.
    I am assuming that this ITunes is for Windows as it is on this computer and also on the Ipad.

    You'll have to reinstall iPhoto in order to get the themes linked back to the application. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the disk it came on originally.
    OT

  • Encore CS4 crashes under Windows 7

    Jeff – I hope this email method of getting a forum message up does work, as currently it’s impossible to sign in to the forums (just get an endless loop of flashing screens about signing in to the forums – great)
    Anyway, I’m still trying to get CS2 up and running, and all I’m seeing is silly attempts by support and no progress since July.
    My original case on this (#211070010) had the following action: 6th Aug I was sent a copy of CS4, which is useless as it can’t open my CS2 projects, which I reported. Then about 15th August I was asked if the CS2 fix I’d been sent had worked.  Since I hadn’t been sent anything I said ‘no’ and the case was then closed! 
    Then a new case (#184634426) was opened, and Support contacted me to ask what the problem was(!).  They then took over my PC one night and proved to themselves that CS4 didn’t work. They then downloaded Creative Suite CS3 to try Encore CS3 – the theory being that if CS3 could open CS2 projects, it could maybe save them in a format CS4 could open. Great idea, but what they installed was useless as Encore CS3 is in Production Suite, not Creative Suite. When they found that out, they gave up and disappeared and I’ve never seen them since, despite telling them they were looking in the wrong install package.
    Anyway, I downloaded the right package, thinking I could try Encore CS3 on a 30-day trial, and if their theory worked, then good. If not I’m back to square 1 again.  BUT, even though I’ve said I want a 30-day trial, the stupid CS3 installer still wants a serial number, which I obviously don’t have. 
    So here we are again – 3 months down the track, a case open for over a month, nothing happening, and no end in sight.

    Jeff,
    Encore CS4 crashes when I try and open Encore 2.0 projects with a meaningless error message that doesn’t tell me why it is crashing or how to fix the project to make it open it. And nobody can explain what the error message means or why it happens, so I have no clues as to how to address the problem.  I have used Encore CS4 to try and open all my old projects and basically if it’s a Premiere-only output file its happy, but if it’s an Encore-only built ‘slideshow’ project it will crash. Which means most of my projects won’t open.
    I have also tried all the Adobe published tricks to fix ‘bad’ projects, which can change the error message to ‘Proxy stream does not support requested functionality’, which is also meaningless and no one can tell me what I should then do to address the underlying issue.
    Encore CS3 may or may not work – I don’t know, as I can’t get it past asking for a serial number, even though I just want a 30-day test period to see if it can re-save the project to improve things for CS4
    Encore DVD used to run fine before this stupid re-registering issue happened.
    All this is on Windows 7 (yes, I know 2.0 isn’t ‘approved’ for Win7, but as I and many others have found, it runs fine).
    I really don’t know why Adobe doesn’t just send us RegEdit instructions to turn on or off the bit that says ‘this program is registered’ and then we could all stop bothering you – it would be a much much simpler and cheaper fix for all of us, Adobe included, than all this farting around.
    Don

  • Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template.  DVD burning works fine.  Anyone know the problem with blu-ray?  HELP!

    Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template.   DVD burning works fine with menu template.  Anyone know the problem with blu-ray?  HELP!

    For CS4 you must update the Roxio component, especially with Win8
    http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
    http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Maybe you are looking for