Problems changing reference range
I am unable to change the reference range. Whenever i click a new range it just remains on the previous range. Has anyone else had this problem before? If so, how do i solve it?
Thanks,
Dilip
Hi,
Try to restart the xcelsius session again, but before that close all the excel session from task manager.
Try one more thing like open a new session on xcelsius and try to replicate the same scenario, see if its working. Revert in case of any further clarification.
Good Luck & Keep Posting.
Similar Messages
-
Need to get a cross-reference to range some pages, say page 16-19
At the moment I'm creating two text anchors, one for each page, 16 and 19, then inserting the page references as two entities.
Is there a better way?Eugene Tyson wrote:
Ok - doing the cross-reference range works that way
The Paragraph Numbers are done with "<paraNum />"
And I use that for the cross-reference - but sometimes it pulls the entire paragraph in instead of the Para num?
Capturing a paragraph in a cross-reference when its format is not defined with the <fullPara/> or <paraText/> building blocks, AFAIK is not a known bug.
To be sure the cross-reference format's building blocks are correct, build the format's expression by clicking the plus sign button in the Cross-Reference Formats dialog box, rather than by typing it or copying it from other defined formats.
To cross-reference a range of pages, insert a page-number format cross-reference at the beginning and end of the range. When content is added to or removed from between the cross-reference source markers, page number references adjust if needed. Take care not to delete the cross-reference markers when deleting text; it's helpful to work with hidden characters displayed. Moving a page that contains a cross-reference marker, as you'd expect, changes the page number reference.
InDesign cross-references don't update automatically; you need to click the Update cross-reference button in the cross-references panel, or click the option in the cross-references panel flyout menu, to fix the yellow warning symbols.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
I am currently designing reports for my lab. I am having trouble trying to get our reference ranges to display grouped together. Of course I can have the fileds display on their own, but then there are spacing issues. I have tried formulas and template fields. However, I keep getting the error message : the result of a formula can not be a range.
//Crystal Report Template Field
WhileReadingRecords;{SPEC_ANALYTES.LOWB} to {SPEC_ANALYTES.HIGHB}
How can I set this up so it will show our reference ranges properly? Any help is greatly appreciated.it looks like your fields are text and not number.
Change your formula like this :
tonumber({SPEC_ANALYTES.LOWB}) to tonumber({SPEC_ANALYTES.HIGHB})
I hope this helps,
Regards,
Zack H. -
How to change the range in numbers?
how to change the range on graph from .0000 to .0 or .00 and ther range on thr graph from 2's to .5
Hi,
Click on Graph Properties icon->Scale Tab -> Click on Vertical axis and specify your range.
Regards,
Dpka -
Probleme changing the value of a variable in movieclip from my scene
Hello,
i have a probleme changing the value of a variable in movieclip from my scene. i explain: I have combobox on my scene containing categories, and in the scene i load an xml file containing links to php files that work with the combobox.
Also on the scene i have a movieclip "filmstrip", inside this movieclip on the first frame i have a script loading the php file selected in the scene . i use a load() function with a variable "theUrl" inside like this : T.load(theUrl);.
In my scene i want to change the value of "theUrl" inside the movieClip filmstrip. I tried filmstrip.theUrl = url; But it doesnt work
the xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<slideshow>
<area title1="10 Last updated" link1="link1.php"/>
<area title1="special" link1="link2.php"/>
</slideshow>
here is the code on my scene:
var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
filmstrip.theUrl=url;//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
filmstrip.theUrl=url; //<<-----HERE
select.addEventListener("change",cbListener);
here is the code inside the movie clip "filmstrip"
var T:XML = new XML();
T.ignoreWhite = true;
T.onLoad = function(xml) {
etc etc etc }
T.load(theUrl); //<<---HERE it still undefinedYESSSS . Thanks you very much Kglad it wotk i put all in a function inside the filmstrip function Tload(theUrl){etc ect}and in the root i call it like this filmstrip.Tload(theUrl); and it works
code in the root var link1:Array = new Array();
var LINK:String;
var url:String;
var whoOn:Number;
whoOn=0;
var x:XML = new XML();
x.ignoreWhite = true;
x.onLoad = function(success) {
var photos:Array = this.firstChild.childNodes;
for (i=0; i<photos.length; i++) {
_root.link1.push(photos[i].attributes.link1);
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<--HERE
x.load("category.xml");
var cbListener:Object = new Object();
cbListener.change = function(event_obj:Object) {
trace(select.selectedItem.label);
if (select.selectedItem.label == "Last updated") {
whoOn=0;
} else if (select.selectedItem.label == "Special") {
whoOn=1;
url=link1[whoOn];
theUrl=url;
filmstrip.Tload(theUrl);//<<-----HERE
select.addEventListener("change",cbListener); -
Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.
Which operating system are you using?
In photoshop elements 6, as far as i know, you can only change the Reference Point Location for transforms using the small grid in the left hand corner of the tool options bar with Transform enabled. -
Is there a way to manually change the range to say 0 to 150 degrees Celsius? Or is the range change done in the software programming?
Thanks MarkThe difference is due to the design of the FP-TC-120. The FP-TC-120 supports four ranges on the ADC (listed in my previous post). Configuring a temperature mode, tells the module to use the built-in linearization algorithms based upon the thermocouple type chosen. For each thermocouple type, one of the four voltage ranges is used depending upon the characteristics of the thermocouple. If a thermocouple, does not take the full scale range, the module can not simply subset the range. In the case of the K type thermocouple, I believe that the upper limit of K thermocouples is 60 mV, so the 60-80 mV portion of the range (roughly corresponding to the 1370 to 1770 C range of the module is unused). The module accuracy specs do take this into account.
Regards,
Aaron -
problem in wifi range i use my phone my rume but i think china mobile is working better than iphone ......
I don't understand what you are asking here. Can you try and ask again?
-
In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?
After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold! I can change the media kind to Audiobook! So, it looks like iTunes Match locked the files up somehow and for some reason.
I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC. -
Change page range to page #
How do you change page range to page number in a book in its panel showing the chapters. I see Page Range Chapter 1 - 1-12, Chapter 2 - 1-5, chapter 3 - 1-50, etc instead of Chapter 1 - 1-12, Chapter 2 - 13-17, Chapter 3 - 18-67, etc?
Every book I open and work on is this way????Peter - It is set for automatic pagination in the page numbering options and page order=continous from previos document and set to automatic in page numbering options
Dominic - No it is set to Absolute numbering
Sorry I didn't respond sooner i checked Subscribe to this discussion by email and didn't recieve anything. -
Having problems changing my verizon prepaid to a new device
I'm having problems changing my Verizon prepaid phone number to a new device.
Anita65,
Oh no, sorry to hear you are having so many issues changing your device. However, get some assistance changing your device by contacting Prepaid Support at 888-294-6804.
KarenC_VZW
Follow us on Twitter @VZWSupport -
Hello,
I am having problems changing my AppleID name. On Apple ID summary, it shows my moms name. Before I was 18 the billing information was under her name. Now I have changed it to my information. When I go to "Account Details" it shows my information, but when I go back to Apple ID summary, it still showers her name. How do i fix this or who can I talk to, to get this changed?
thanksThere is no an easier solution?
Thank you ! -
Problem in Number range tranfer-OBH2
Dear Gurus,
I have a problem in number Range of OBH2- tanfer
i given company code and number range and specified the fiscal year and target year.
But system showing List contains no data.
Help me where i can check, anything i missed.
Regards
sreenivas.PHai Sree,
While copying the no ranges from target company code first u can check the whether no ranges are there or not then copy the no ranges
Regards
Madhu I -
Changing date range in Report...
Hi all,
in report i have to change date range ..it is presently 1.1.2006 to 31.12.2006. i need to change year to 2007....
can anyone please suggest me how to do that?Hi,
In query Designer,select your date Char. expand u find Char. Variables.
Select your Char. Varaible(the variable which is used to restrict the Values). right click ->edit,where u can change defalut date values or make it as blank. -
Revision: 10317
Author: [email protected]
Date: 2009-09-16 12:56:03 -0700 (Wed, 16 Sep 2009)
Log Message:
In ASDoc comment, change reference of "Flex Builder" to "Flash Builder"
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/netmon/NetworkMonitor.as
Maybe you are looking for
-
Some instruments greyed out in garageband
Hi guys , not used Garageband for a while . After downloading update and playing around for a while . I noticed that some of the instruments are greyed out ? Is there a reason , ie, like they have to be purchased ?
-
AIF webdynpro for Java Prerequsites
Hi, What are the prerequsite for AIF development with Portal 6.0 WebAS 640 (SP17). NWDS Version? ADS version? ALD Version? any other required componets and their versions? If you could point me to some documentation on this that would also be he
-
Nokia c3-01 charger not recognized message
Bought nokia c3 -01 in Malaysia when i plug in charger here in australia get message charger not recognised? have done update and tried different chargers but still have problem.how can i fix this?
-
Hi, I am new in Windows Phone development, I have a listbox with a datatemplate, in the datatemplate there is a textblock named mytextblock, I can not access the textblock by using the name in MainPage.xaml.cs. But I want to change the forebackground
-
How do you delete part of an app you downloaded
how do i delete part of an app that i downloaded. do i have to delete the whole app and then reload what i want