Problems charging since recent upgrade.

I dont know which upgrade it was but the most recent today is march 24th 2011 my phone is new iphone 4.
Tried many different charges phone works fine except not being read by itunes so isnt even recognised as a usb device either.
Still the normal charger with plug should work. Dont want to reset and loose all my setup data like internet and calendar or videos and just tons of settings,.
what can I do now to maybe help this, I have 13% power now ..

Vodafone are going to replace it (but it wont be a new phone and im none too happy), I think it is coincidental to the software upgrade. For my mind I cannot see how software should engage with the charging of the unit as if there is no power no operating system or drivers could be loaded into memory as there is no power to do that and even if there is a chip with loaded stuff already on it then it needs power a secondary battery could perhaps run some rudimentary charging controls but I would think there is only one battery.
Still seems like a hardware failure.

Similar Messages

  • Nothing but problems since recent upgrade to Infin...

    I recently upgraded to BT Infinity. Previously I had a wireless connection throughout the house. Since the upgrade I have had quite a lot of problems. The hub is now in a different room than with the previous BB. I found that;
    1) Wireless not available in a few rooms
    2) Internet connection keeps switching off on laptop + PC
     I purchased a booster as advised by BT. This helps at times but then I realized that not all my issues were down to the wireless connection. I realize many different devices can interfere with the connection but prior to Infinity everything was fine. This is the only change in my house. There has been no new electrical devices.
    Now the following happens;
    a) Internet connection keeps going down on various devices - particularly at 11pm at night
    b) At times I cannot even connect with an ethernet cable from hub to laptop
    c) At times speedtest shows poor results
    I've had various ideas suggested by the BT employee who is attached to my case, unfortunately nothing has improved the situation and I am getting extremely frustrated with the problem. The following has been done;
    1) My hub has been replaced
    2) Channels reset
    3) Engineer has tried to remotely fix problem and also replaced some part of copper wire leading into house
    BT have recently sent me 2 powerline adaptors to try and set my hub away from the openreach box in the room it was in previously as I had no problems prior to the upgrade. Unfortunatelly BT have been unable to talk me through this and obtain a broadband connection. The BT employee is trying to set it up differently from the conventional way which he said has worked for customers before. I am awaiting the original employee to telephone me back in a few days as he is off work and his colleagues are not sure of the set up.
    I am also awaiting yet another Openreach engineer to call in a few days if the problem cannot be resolved.
    Initially for the first few weeks it was a complete nightmare contacting BT and having to keep repeating my story and having various employees reset channels and work their way through a set script. However recently a set person seems to have been assigned to this case and has been very dilligently phoning me and trying to resolve the problem. This is the only thing that has kept me sane as I was getting so annoyed by having to phone and take potluck with their general phone number.
    I would be pleased to hear from anyone with similar problems or suggestions to resolve this.
    Many thanks.

    Hi
    I am sorry to see you are having problems
    I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Cannot access my google calendar since recent upgrade

    I operate an iMac. OS 10.6.8. I have used FIREFOX successfully for years. I have placed my google calendar in Firefox--perfect performance even to my Palm Pre Plus. I upgraded FIREFOX to version 6.0.2. TROUBLE! I cannot access my calendar since the upgrade. If I select the icon for FIREFOX, what I see on my screen is:/Screen shot 2011-09-09 at 9.18.03 PM.png--or, LOADING, For slow connections, load read-only view. When I select that, a long delay and I can only view the current month, nor the last month nor the next month nor the WEEKLY view, which is my favorite.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Macbook pro battery not charging since lion upgrade

    I have a Macbook pro 13'' (2010 Mid) and my battery doesn't charge since last night. I installed Lion 3 days ago, and the battery was charging correctly, but since last night it doesn't charge anymore.
    At first, I thought it could be the magsafe problem, but after a few hours the battery started recharging again.
    Any idea?

    You're lucky, my friend, because at least you can use your MBP corded.
    Mine doesn't work even with MagSafe plugged. I have an almost dead MB with less than 30% battery... it's like "the final countdown" ...
    What the h... is Apple waiting for to release any solution or at least talk about this officially ?
    Grrr...
    This didn't happen to me since I bought my first iBook G3 computer and its Sony optical drive was working poorly for months !!  Finally, Apple "decided" to release a new firmware, just when I had bought an external recorder...
    This issue also stinks...

  • Crashed twice since recent upgrade.

    Ever since I upgraded to 6.0.2 I have been having trouble. If any other app is open and iTunes starts to update podcasts my computer freezes. Twice now my Library database file has been damaged, the first time iTunes was able to recover itself, and create a new file, but this time it collapsed, and I am going to have to drag and drop from my hard drive.
    Any advice?
    Thanks.

    Underneath I have selected Music and Radio is an option between Videos and Match at the top on the right. The other reason it might not show up is in Preference, Parental you have the Radio box ticked to disable it. I have attached 2 screenshots both of itunes 11 in its 2 looks

  • Since recent upgrade, can not download from YouTube

    Before the most recent upgrade to Firefox 3.6.8 two weeks ago, everything worked fine with this program. My issue is, I can not copy and paste a URL address from You Tube and download it into a program called Audio Editor. After the upgrade, when I copy and paste the URL address and start to download, there is no download. The message No File Downloaded, please try again. It is like there is nothing there. It worked great for a couple of months.
    Is there a setting in the new version of Firefox that prevents me from copying, pasting and downloading from You Tube?
    == This happened ==
    Every time Firefox opened
    == after upgrading Firefox 2 weeks ago to 3.6.8

    Hello Tad.
    Can you be more clear about your issue. What I understand from your post is that you "can not copy and paste a URL address from You Tube and download it into a program called Audio Editor". Does this mean that you cannot paste the URL you copy? Or does this mean that Audio Editor is not recognizing the URL?
    Also, this Audio Editor you speak off is not developed by Mozilla, so if it's just that it's not working correctly, you need to contact its author for support.

  • Problem logging on to Lloyds TSB Online Banking since recent upgrade to their sytem.

    Tried for the last three days to get on to Lloyds online banking website. Just get "connecting" progress within tab, with "waiting for secure2.lloydstsb.co.uk" message at base. Lloyds assure me as there is no error message displayed that the problem is with Firefox (this has only happened since lloyds updated their software a few days ago). Have checked I have the most up-to-date version; and updated all plug ins. Still no luck!

    Installing the latest version of Java seems to have improved this for me although some pages still need to be reloaded to get them to display correctly once I am logged in.

  • I am having trouble using hotmail since recent upgrade.

    On June 15 after a mozilla upgrade I am able to sign in to my hotmail account but unable to open emails, or delete anything, or open folders etc. I click on something and it works a while and says done but nothing happens. What can be done? Also I can not find a basic way to contact mozilla to report this and get any help. If I sign in using explorer I can work the hotmail acct. just fine so it is definitely a firefox problem.

    On June 15 after a mozilla upgrade I am able to sign in to my hotmail account but unable to open emails, or delete anything, or open folders etc. I click on something and it works a while and says done but nothing happens. What can be done? Also I can not find a basic way to contact mozilla to report this and get any help. If I sign in using explorer I can work the hotmail acct. just fine so it is definitely a firefox problem.

  • Since recent upgrade to win 8 from 7, HP printer will not accurately print from Photosmart 7.0.1. ?

    Is there an update to correct this?

    Seems like your question would be better in an HP forum than Adobe.  Photosmart is of course not an Adobe product.  Have you checked the HP site for driver updates for your particular set of hardware?
    You haven't been very specific; perhaps if you provide more info about specifically what you have and what you're seeing go wrong someone will be able to help you better.
    I don't have a suggestion for you beyond that, but this is for others considering Windows 8:  It's never good to upgrade to a brand new OS in the first weeks after its release.  An OS is more than just software from the manufacturer - it involves support from hardware vendors.  No matter how many preview versions the OS manufacturer has released, device driver perfection (printer, display, storage devices, motherboard) ALWAYS lags behind the OS release.
    Right now apparently there are a number of known problems with Windows 8:
    With display drivers (people not getting good GPU support with ATI cards in Normal and Advanced modes, for example).
    With printer drivers.
    With storage drivers (I've heard of troubles with RAID controllers, for example).
    In the professional realm there's an old adage, born from long experience:  Never upgrade to a new Windows version until Service Pack 1.
    With Windows 8 there is the additional consideration (for those who haven't yet taken the plunge):  Carefully consider whether Windows 8 adds any return on investment (ROI) that you actually need. 
    Microsoft has taken off in a new non-pro direction with Windows 8 and has actually DEGRADED the desktop experience (presumably to try to herd us all over into the Metro/Modern realm).  It may be that the best idea would be to continue to use Windows 7 and wait until Windows 9 (or whatever they call the next release) to re-evaluate upgrade options.
    -Noel

  • Script Error at launch since recent upgrade to CS6 & features missing

    After many failed attempts at getting all of the programs in CS6 Design Premium installed, I was finally able to with the help of the "Installing" forum.  Unfortunately I am still having problems with InDesign.  When launching I still get the script error:
    Error in C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CS6\Flash\Flash-12.0.jsx
    Line 153: if( app.name = = flashAppname && (module.name = = 'DefaultScript' II module.name = = 'Flash'))
    Cannot open resource file.
    Also, I am still missing Effects features under the Object drop down menu. Any ideas?  I am able to open files that have "effects" in them, but am not able to edit the effects at all. I am hoping someone can help me out.  I have already ran a Adobe Support Advisor log and from what I have been told it checked out fine.  Here is the thread:http://forums.adobe.com/message/4727814#4727814

    While the log might not indicate a problem, I think the error message and missing effects pretty much says otherwise.
    I don't like to say this, especially since you had so much trouble getting this far, but I think you need to uninstall and reinstall, and I'd run the Clean script, befor the reinstall: CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
    That said, though, I'd try a last-ditch effort at a repair first. Try running MSconfig and turn off all non-essential startups and services, which is pretty much anything non-microsoft. I leave my mouse driver running, but it isn't necessary. Be sure that you've turned off anti-virus and malware scanners, instant messengers, iTunes, and any brower helpers or toolbars. Reboot. If you wind up back in MSconfig, press cancel to continue in diagnostic mode.
    Run the installer. Wheter it would be best to uninstall ID, the reboot and run the installer again (still in diagnostic mode) to reinstall, or to just run a "repair" is probably a toss-up. I don't think eihter one is going to thoroughly clean the registry the way the cleaner tool does (but as far aas I know, that's gong to remove the entire package, not just ID, so we want to avoid it if possible). I'd probably try the reapir first, as it's faster and if it works, great. If not uninstall, reboot again, and reinstall.
    Once finished with the installer, run MSconfig again and check the "normal startup" box and reboot.

  • Phone losing all data numerous times a day since recent upgrade

    What's the deal, Verizon? 

    I posted this possible solution in another thread on here.  Go into Settings -> More Settings -> Mobile Networks -> Network mode.  Change it from Global to LTE/CDMA.  Then back out and go to Access Point Names.  There should be a green circle next to LTE - Verizon Internet.  If not, press the circle on the right which should turn it green.  Back out and restart the phone. So far, this has resolved my problem since the update. Hopefully it helps.

  • Safari not opening pages since recent upgrade

    A few days back there was a software update message concerning airport.   I did the update and ever since Safari has been randomly failing to load pages.  It half loads the page and then just stops.   This happens most frequenty when I'm trying to access linked pages.   Once it stops I cannot attempt to reload the page without rebooting the computer.  What going on?  (10.8.4 on 2008  iMac)

    Are other browsers, such as Firefox, also affected? What about other Internet applications, such as iTunes and the App Store?

  • Since recent upgrade of OS X Safari  won't download a readable adobe document.  Is there a fix?

    I was notified to upgrade OS X to 10.8.5.  Part of the upgrade was adjustments to Safari.  Now when I download a document into Adobe format it will not open and gives an alert that it is not able to be opened because it is damaged.  Never happened before.  Does Safari need a fix?

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Cannot connect to my Hotmail POP account since recent upgrade.  Any help?

    After installing an IOS upgrade last week I can not longer get my hotmail POP account to work.  Can anyone guide me?

    iOS is for mobile devices & should have no effect on email accts on a computer.  Which OS is installed on your computer & what did you update on your computer? 

  • Since recent upgrade, I can't see any of my projects in Shutterfly. Their customer support says it may be issue with Java app and Adobe Flash Player

    see above-- are there known issues with these apps?

    Your Java player (if relevant) is not clearly indicated in your plugins list, and your Flash player is several versions behind. If Apple has an update site, you might check that first. Mozilla's site is here: http://www.mozilla.org/plugincheck/

Maybe you are looking for

  • Groupwise 7 Gateway for Exchange

    I am testing the Novell Groupwise Gateway for Exchange SP2. I have already tested the API Gateway but wanted to try the newer version because it will be supported for awhile. I downloaded the install and went through all the instructions. I am using

  • How to change a value with reference if inside of a tabControl?

    Hello, i have a Vi with a tabcontrol and two pages. On each page is a string-control (string1 and string2). Now i have second vi that gets the file-reference of the first vi and is called inside of the first vi. This reference do i want to use to cha

  • XI integration

    Hello every one....           As doing web log scenario..BW-XI integration( how to send XML data to BW from XI ). I configured all the steps in that web log..but final step is not woking eventhough i created html file nad xml file as per the web log

  • No field values in BW after pulling from R/3

    Hello, Schedule was successful and all the data records were uploaded into BW. But the filed values of one field which happens to a time field is showing only zeroes in all the filed values. That particular time field in R/3 has of course distinct va

  • Precompiling a JSP that uses a bean

    Hi,           I am facing a problem when I startup Weblogic with precompiling ON.           I have a JSP that uses a bean. When the JSP is being compiled, Weblogic is           actually trying to instantiate the bean and is executing code in the