Problems Communicating with non-NI hardware which previously worked!

I am currently carrying out a project with which I am using LabVIEW 7.1 involving communication with a non-NI board. This has proved succesful until I moved the system to another desk, (which had already been done a couple of times with no problems) and now I have moved it to its origional location. The system components have not changed, and the VI has not changed but now when I run the programme the error 'Error -1073807346 occurred at VISA Open in without graph2(backup4)..vi'   with the possible reason given as 'VISA:  (Hex 0xBFFF000E) The given session or object reference is invalid'. I am insure what the problem may be, and have checked all connection leads, and ensured that the interface card is still securely fixed in the PC!
Please Help!!
David D

Thanks for the advice!
Unfortunately it was a computer virus that had got into the system. It is ok now though,
thanks again,
David D

Similar Messages

  • There is a problem communicating with the printer.

    I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
    I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
    In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
    However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
    I've exhausted Lexmark's technical databases and couldn't find the answer here.
    I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
    Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
    1. Your printer is associated with a network, router, or access point, but it is not your network.
    2. A software process is blocked by a system security firewall preventing network communication.
    3. You are logged into Virtual Private Network (VPN).
    4. You are connected to a network but have decided to switch to a USB connection.
    I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
    I can print directly via USB cable, but want to print wirelessly.
    Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
    Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
    Message was edited by: Macman17

    I bet this is too late but...
    Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

  • Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

    Hello
    I have Lync 2013 and 2010  , still i didn't finish my migration completely from 2010 to 2013 .this  is  coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
    There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013  front end and backend server's .
    later on after restarting both the front end and the back end server's i start having hundred's of  these error's related to "LS Call Park Service".
    so any advice for these issue ? and what is the effect for these error .
    below is the error I got .
    The database being used by Group Pickup is not the appropriate version.
    The database is not the correct version:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
    Actual...   SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
    Cause: The database has not been upgraded.
    Resolution:
    Upgrade the database to CU1.
    ==============================================================
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    =============================================================================
    Kind Regards
    MK

    Hello
    thanks Holger for u r replay .
    due to the Microsoft article about the cu :
    I run only :
    Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
    Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
    Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
    Install-CsDatabase -CentralManagementDatabase command to apply the changes.
    here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
    PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
    VERBOSE: Install databases required by Lync Server role(s).
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
    VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
    VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is DbState_RequiresMinorUpgrade.
    Database rtcxds set to mode Restricted.
    Dropping all procedures, functions and views from database rtcxds.
    Executing RtcDb.sql...
    Adding master role...
    Setting owner for database rtcxds to sa.
    Creating login MyDomain\RTCHSUniversalServices.
    Creating user MyDomain\RTCHSUniversalServices.
    Creating Schema MyDomain\RTCHSUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
    Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
    Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
    Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
    Setting the database rtcxds to multi user mode.
    Database rtcxds is set to multi user mode.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcshared.
    Database created by script "RtcSharedDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
    VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rtcab.
    Checking state for database rtcab.
    State of database rtcab is DbState_RequiresMinorUpgrade.
    Database rtcab set to mode Restricted.
    Dropping all procedures, functions and views from database rtcab.
    Executing RtcAbTypes.sql...
    WARNING: Warning: Failed to execute batch --
    -- Copyright (c) Microsoft Corporation. All rights reserved.
    exec sp_addrole N'ServerRole'.
    Executing RtcAbDb.sql...
    Setting owner for database rtcab to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
    Setting the database rtcab to multi user mode.
    Database rtcab is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
    VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsconfig.
    Database created by script "RgsConfigDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database rgsdyn.
    Database created by script "RgsDynDatabase" already exists and is current.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database cpsdyn.
    Checking state for database cpsdyn.
    State of database cpsdyn is DbState_RequiresMinorUpgrade.
    Database cpsdyn set to mode Restricted.
    Dropping all procedures, functions and views from database cpsdyn.
    Executing CpsDyn.sql...
    Setting owner for database cpsdyn to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Creating login MyDomain\RTCUniversalReadOnlyAdmins.
    Creating user MyDomain\RTCUniversalReadOnlyAdmins.
    Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
    Creating login MyDomain\RTCUniversalServerAdmins.
    Creating user MyDomain\RTCUniversalServerAdmins.
    Creating Schema MyDomain\RTCUniversalServerAdmins.
    Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
    Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
    Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
    Setting the database cpsdyn to multi user mode.
    Database cpsdyn is set to multi user mode.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
    VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsLog.
    Database created by script "ArchivingDatabase" already exists and is current.
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
    VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    Checking state for database LcsCDR.
    State of database LcsCDR is DbState_RequiresMinorUpgrade.
    WARNING: The database LcsCDR being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
    WARNING: The database LcsCDR being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
    Database LcsCDR set to mode Restricted.
    Dropping all procedures, functions and views from database LcsCDR.
    Executing CdrDb.sql...
    Setting owner for database LcsCDR to sa.
    Creating login MyDomain\CSAdministrator.
    Creating user MyDomain\CSAdministrator.
    Creating Schema MyDomain\CSAdministrator.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
    Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
    Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
    Setting the database LcsCDR to multi user mode.
    Database LcsCDR is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing CdrJobs.sql...
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
    Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 5058.
    Sql version is acceptable.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    Checking state for database QoEMetrics.
    State of database QoEMetrics is DbState_RequiresMinorUpgrade.
    WARNING: The database QoEMetrics being updated has data file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
    WARNING: The database QoEMetrics being updated has log file path at
    \\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
    \\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
    Database QoEMetrics set to mode Restricted.
    Dropping all procedures, functions and views from database QoEMetrics.
    Executing QoEDb.sql...
    Setting owner for database QoEMetrics to sa.
    Creating login MyDomain\RTCComponentUniversalServices.
    Creating user MyDomain\RTCComponentUniversalServices.
    Creating Schema MyDomain\RTCComponentUniversalServices.
    Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
    Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
    Setting the database QoEMetrics to multi user mode.
    Database QoEMetrics is set to multi user mode.
    SQL Server Agent is running and its start mode was detected as Auto.
    Executing QoEJobs.sql...
    VERBOSE: Successfully installed the database. For details, see the following log:
    "C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
    VERBOSE: No changes were made to the Central Management Store.
    VERBOSE: Creating new log file
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
    WARNING: Detailed results can be found at
    "C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
    PS C:\Users\MK>
    I hope some one can confirm no issue with what I did ??
    Kind Regards
    MK

  • "There was a problem communicating with the Apple Online Store. Please try again."

    When I try to order prints on my Macbook I get the error .... "There was a problem communicating with the Apple Online Store. Please try again."  I've gotten this error for a few days.  When I try the same thing with my wife's Macbook Pro there are no issues.  How do I fix the problem on m Macbook?

    I found the problem thanks to some help given.
    Go to iPhoto menu -> Preferences... -> Advanced -> > Print Products Store  was set to "none". I changed that to my own country and then it worked, I could place the order.
    Thanks a lot!

  • I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

    I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I  am using windows 7 professional install disc. I  can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

    Help!  I was cruzing along just fine and went out tonight only to receive the message above:
    Cannot open Page
    Safari cannot open the page
    The error was: "There was a problem communicating with the web proxy server (HTTP)."
    I have had all the Apple iPhone phone.  Have never encountered anything like this. 
    All systems are GO as soon as I log on to wifi. 
    Can anyone help, please. 

    I am also fixed.  I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
    I went to:
    Settings
    Wifi
    I selected the network I was working on by hitting the blue arrow located on right side
    At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
    I was on Off and changed it to Auto and it worked! 
    I was soo jazzed!!
    Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
    YIPPIE!!  I'm a new man!!
    Go to settings -----> WI-FI  -----> select the network you're using  ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.  
    --------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO.   Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

  • Captivate 8 Tin Can - problem communicating with the learning record store

    When publishing a course to Tin Can format, what should I enter in the 'Identifier' field?
    If I publish with the default 'Course_ID1' text, I get an error when launching the course on our LMS. Errors says "There was a problem communicating with the learning record store."

    Hello,
    Welcome to Adobe Forums.
    Please share your contact information via [email protected]
    Thanks,
    Vikram Gaur
    Adobe Support

  • Unable to Sign in beacuse of a problem communicating with iCloud

    Can not add my phone or Ipad to icloud, I get the error on both..
    "Unable to Sign in beacuse of a problem communicating with iCloud"
    can download apps through app store, run out of ideas! help

    I had the same problem. I've even tried reinstalling osx.
    the solution is to delete
    NetworkInterfaces.plist
    in
    /Library/Preferences/SystemConfiguration/
    then reboot. The file is recreated and iCloud works again.

  • Error : There was a problem communicating with the Group Pickup backend database.

    Hi , 
    I found this error in Event viewer for Every 2 min on lync server 2013 :
    There was a problem communicating with the Group Pickup backend database.
    There were problems accessing SQL server:
    Connection: Data Source=(local)\rtc;Initial Catalog=cpsdyn;Integrated Security=True
    Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
    Error code: -2146232060
    Error number: 229
    Cause: This may be caused by connectivity issues with the backend database.
    Resolution:
    Check if SQL backend is running and accepts connections from Group Pickup.
    what can i  do ?

    Hi,
    Did you solve the issue with the help of the suggest Anthony provided above?
    If the issue persists, please check if you update the latest vesion of Lync Server 2013. If not, please update it, make sure after install the update for all FE Servers,
    then make sure to update BE Server as well. Then rerun Step 2 Setup or remove Lync Server Components.
    Here is a similar case may help you:
    https://social.technet.microsoft.com/Forums/lync/en-US/3b616e51-93ad-430a-aa93-57c2fd19e0f6/call-pickup-db-issue-after-cu1-update-to-lync-2013-enterprise?forum=lyncdeploy
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • There was a problem communicating with the screenshot service, please try again later.

    I've used browser lab for months without issues until late last month it keeps showing me this error:
    There was a problem communicating with the screenshot service, please try again later.
    I have to retry 3-5 times before I can get it to load the page.
    I'm accessing browser lab through firefox 13.0.1 Mac OS X 10.7.4

    Hi,
    We've had some problems with some of the backend systems we use and have had some accounts get into bad states. Can you please try it again until you see the problem, then respond with:
    The AdobeID you use to login to BrowserLab with (don't post your password).
    The date, time, and timezone of when you saw this error message.
    Thanks, that will let us dig into the logs, see what they tell us and look into your issue further.
    Mark

  • Windows has encountered a problem communicating with a device connected to my computer

    I have an HP Pavilion dv6 notebook; Product # WF536AV, running Win 7-Home. Without warning, when trying to boot one day I got the following error message: 
    Windows has encountered a problem communicating with a device connected to your computer. May be caused by unplugging removable storage while in use or a faulty hhd or CD drive. An unexpected I/O error. Error Code oxcoooooe9.
    I have a 500GB WDC hhd that seems to run hot.
    Cannot get into F8 Advanced Options, although I can get into BIOS (F9 & F10)
    Ran the Win 7 Recovery Disks twice. No help. Same message
    I can run Linux Ubuntu in memory (not installed). GParted shows the following:    
           Partition size    used       unused   label   flag              file system
    Sda1 76GB       14GB       61GB                                       NTFS
    sda2 400MB     300MB   100MB    SDV     Boot lba      FAT32
    unallocated 390GB
    6. No access to Recovery Manager
    7. F2: memory test passed but hhd test would not run
    8. In Ubuntu Disk Manager, report said drive had 'a few bad sectors', but hhd test would not run "Self Test- Failed (Read)
    9) Ran MBR repair disk and System Rescue disk; no luck
    10) In Ubuntu, when I look at the Windows file system, In 82 GB partition there is an 'RM' folder with an "Image" folder with 16 files.  In the SDV partition is the bootmgr folder and several others
    a) why cannot I boot to Windows off the hhd?
    b) what does SDV label mean (secure digital video; silicon data valu;tr; static driver verifer  from Windows)?
    c) is the hhd simply failing. I do not have an extra to swap out and try
    d) may the Win 7 Recovery disks bad, perhaps, and should I then download a Win 7 ISO file and try that?
    Thanks for any help. This is highly frustrating. I have already spent about 8 hours on this!

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • HT204085 Unable to sign in because of a problem communicating with iCloud

    After the newest update, my iMac will not let me sign in to iCloud.  This is the error it reads:  Unable to sign in because of a problem communicating with iCloud.  Both my iPhone and iPad are fine, just not on iMac.  Can't find any help! 

    I had the same problem. I've even tried reinstalling osx.
    the solution is to delete
    NetworkInterfaces.plist
    in
    /Library/Preferences/SystemConfiguration/
    then reboot. The file is recreated and iCloud works again.

  • IPhoto 2014 Ordering prints, problems communicating with apple online store

    iPhoto v. 9.5.1
    When I'm trying to order prints directly from within iPhoto, i get this error "There was a problem communicating with the Apple Online Store. Please try again."
    I tried:
    - Booting from safe mode
    - Calling tech support
    - Reinstalling iPhoto
    - This guide: http://b.rthr.me/wp/?p=356
    The only thing that are partly working is changing country iPhoto > Preferences > Advanced > Print Product Store.
    If i change from Denmark to Germany or UK, i get the check out screen - but I can't pay with a danish credit card or choose to have the package send to Denmark.
    Any ideas?

    The following are two fixes posted by other users that helped them:
    #1
    go to the System/Sharing preference pane and make sure Remote Apple Events is checked.
    If it is, uncheck it and then recheck and try ordering again.
    #2
    Quit iPhoto.
    From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
    In your Utilities folder, open Keychain Access.
    Find the "NetServices" entry in your Keychain Access window.
    Select the "NetServices" entry and press the delete key.
    Reopen iPhoto and attempt to place your order again.
    You should be prompted to enter your account information if you deleted the Keychain entry successfully.
    After entering your account information, you should be able to complete your order.
    OT

  • Problem communicating with Airport express

    I have had a smal home network for some time. Set up is AEBS, AXBS as client to use airtunes to the stereo, an iMac that connects via wire to the AEBS, and a wireless Macbook. No security enabled. Today I was streaming some music, and burning some cd's with the macbook, when I noticed a very strange thing in the istat pro widget. In the network section it read in: 1 mb , out 104 mb. The computer had acted strange, as in very slow, so I freaked out and suspected someone was connected to my network and sucking info (or something) out of it. So I went ahead and enabled WEP security. Everything worked fine with the Macbook and the AEBS, even with the iMac, but I can't get pass a "there is a problem communicating with the base station" when I tried to change the settings in the AXBS. I tried to do it wireless and through internet to no avail...
    I hope some onecan point me in the right direction
    thanks in advance

    2 Possibilities:
    1) AirPort Utility on your computer has become corrupted. Delete the current application located Macintosh HD > Applications > Utilities > AirPort Utility, restart your computer and then reinstall the application.
    http://support.apple.com/downloads/#airport
    2) The AirPort Express device is not fully resetting to factory defaults due to an internal component problem. If you've tried the factory default reset a number of times and still can't configure the device, it will need to be replaced.

  • The "gig" is not up. IMHO the problem is with software, not hardware

    There very well could be a few iPhones that have hardware problems but my opinion / findings say it is sofrtware rather than hardware.
    Case in point. I have owned my iPod Touch (32 GB) for over 6 months now and have had no problems with it until I installed 2.0 software. The problem got even worse on the Touch when I upgraded to 2.0.1. The problem was freezing up which required a special rest proceedure and a complete restore. I had the same problem with not one but two iPhone 3G's (I returned the first one). Same scenario. Speical reset and complete restore solved the problem. I have now had no problems except for a little instability (such as slow keyboard from time to time) for the past 4 days. Bear in mind this is on BOTH the iPOd Touch AND the iPhone 3G. ONe would think that if the problem was with hardware that the problem would not be with both the iPhone 3G AND the iPOd Touch.
    Would love to hear the opinions of others.
    Ken

    If your question is "Is the 2.0/2.01 software buggier/slower/flakier than the 1.0/1.1/etc. software for iPhone/iPod Touch", then the answer is of course SMS typing slows down on occasion now, weird pauses, freezes etc. are all new to 2.0/2.01.
    This doesn't mean that the iPhone 3G hardware isn't possibly flawed as well-that still hasn't been answered. But its pretty common knowledge (I think) that 2.0/2.01 is much less stable than the 1.0 OS. (on the flip side, look at all the new stuff we get to play with in 2.0/2.01 )

Maybe you are looking for