Problems con opcenum after installing LabView 2014

After installing LabView 2014, all other OPC compliant software (Matlab with the OPC Toolbox, Wonderware SCADA, OPC Demo Client from Softing, ...) previously installed on my PC (Windows 7) started to have problems in browsing OPC Servers. They were unable to connect with opcenum service for listing installed OPC servers. After manually unregistering opcenum and registering again as a service (and cleaning the windows register), everything was solved.
So I guess there is a bug with the labview installer that mess things up with the opcenum service. I haven't found anything on the web but in case anyone has the same problem, this is the "manual" solution. Anyway, I would like to ask NI to revise the problem.
Regards,
Jesús

Hello,
I haven´t heard of this issue with a standard LabView install, however there is a known issue with the standard DSC install. Have you installed DSC 7.1? If so you need to go in and modify the DSC install to uninstall the "Keyboard Filter". The filter causes the computer to hang when it attempts to suspend.
Regards
Thomas D.
NI Germany
(SRQ 202575)

Similar Messages

Premiere CC 7.2.2 will not close project or quit after installing PP 2014

After installing PP 2014 I can open a new (or old) project in CC 7.2.2 but cannot close that project or quit the app unless I Force Quit. Anyone else experience this and is there a solution?
PP 2014 seems to work OK.
New maxed out MacPro on 10.9.5
Thanks, Tom at Seascape Productions

Called Adobe tech support and they solved the issue. It was a permissions problem.

Time and Classifieds services missing after installing LabVIEW 8.0

Hi,
After installing LabVIEW 8.0 I noticed the Lookout Time and Classifieds services are missing. At first I thought it was just the Lookout lighthouse in the system tray which had disappeared but when checking in services.msc I can see that the services themselves are no longer there. The Citadel server is, however.
I am using Lookout Direct so please let me know if this question is more appropriate on the Automation Direct forums. I'm trying to change to a NI solution instead but every step is taking me considerable time.
Thanks,
Dave

Try to repair Lookout Direct from Windows Add/Remove Programs. The missing services should be reinstalled after repair.
Ryan Shi
National Instruments

Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

Some saved Mac links that may help
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Blue screen after installing labview 8

I recently installed Labview 8 Professional Dev. Suite on to a Win. XP SP2 system. The image before installation was stable. After the installation and reboot, the system blue screens (I have been unable to read the exact message on the blue screen) and reboots. I was able to boot if I selected "using last know configuration" option in the Windows XP boot options, indicating that the problem is driver/registry related. After I use the last know configuration, I get an error message "nidevmon.exe - Application Error. The application failed to initialize properly (0xc0000142). Click on OK to terminate the application."
I tried to repair all of the installed NI products without any success.
Device manager shows all devices installed properly without any conflicts.
Please advise on how I can resolve this installation conflict.
Thanks.
--Jeff

Hi, I am experiencing the same problem. When my system boots up I receive the "nidevmon.exe could not be initialized" error message. When I try to manually start the program after startup, I still get the same message. I am running Microsoft Windows XP [Version 5.1.2600] and have also updated my system with the latest patches. I have the ni USB-6008 device. My system is an IBM Thinkpad T40, 1.5Ghz Centrino, with 512MB ram, and 80GB hd. I have installed labview 7.1 and then NI-DAQmx 8.0 that came with the card.
Furthermore, the hardware does not succesfully install on my system. After I install the software, reboot and plug the usb device in, the hardware wizard pops up. However, in the end, I get "Windows cannot initialize the device driver for this hardware. (Code 37)". I suspect this has to do with the nidevmon.exe not initializing. The ni hardware appears to be fine, I have successfully installed the devices in another system. I uninstalled and reinstalled the ni-daqmx 8.0 software several times, and even downloaded version 7.5 from the web, however this did not solve the problem either. I would appreciate any suggestions..
Thanks,
Arash

Diadem 9 crashes after installing LabView 8.6

Hello,
I'm searching for a solution to fix a problem that occurred on Diadem 9.0 after installation of LabView 8.6.
The software was working fine until I've installed LabView. Since that time it crashes after few seconds I've already uninstalled it and installed it new, no progress...
Does anybody know what's the problem and how to fix it?
Thanks in advance,
Regards,
Paul
Solved!
Go to Solution.

Hello Paul and Otmar,
I had a similar problem a few month ago:
While installing LabVIEW 8.6, an actual NI-DAQmx driver was installed too. Please double-check the installed version. I guess, that it is something around NI-DAQmx 8.7. You will find this information in your "Measurement & Automation Explorer (MAX)" (Start -> Programms -> National Instruments). In MAX, please browse to 'My Computer -> Software -> NI-DAQmx'.
Please click on this item and you will get on the right side the installed version.
Unfortunately, the latest supported driver version of DIAdem 9.1 is NI-DAQmx 8.1. This information can be found here:
http://digital.ni.com/public.nsf/allkb/53BA46C79DE2786686257249005619A5?OpenDocument
If you have installed a later version of DAQmx, please consider to upgrade your DIAdem to a newer version. If this is not possible, you have to deinstall the actual DAQmx-driver and install DAQmx 8.1. This one can be found here:
http://joule.ni.com/nidu/cds/view/p/id/319/lang/en
I hope, that this helped you.
Best regards and have a great weekend
Message Edited by MarianMO on 04-17-2009 02:46 PM
MarianO

After installing SSMS 2014 I can no longer add a source or destination in SSIS VS2010

I really don't know what is happening but I have been using VS2010 and SSMS 2014 for a couple of months now with no issue. Yesterday when I opened an SSIS package that I had created in VS2010 I was no longer able to add a source or destination to any of
the data flows. I can copy an existing one and change the properties but when I try to drag it from the tool bow I get the following error -
TITLE: Microsoft Visual Studio
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method.
ADDITIONAL INFORMATION:
Error at "WORKFLOW NAME" [SSIS.Pipeline]: Component ", clsid {GUID}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly.
Error at "WORKFLOW NAME" [ [128]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
NOTE:I replaced the workflow name and the GUID because I don't think it is important for the post.
When I search for the GUID in regedit it leads me to an entry that has the folder DTSInfo and the value of
Microsoft.DataTransformationServices.DataFlowUI.OleDbSourceUI, Microsoft.DataTransformationServices.DataFlowUI, Version=12.0.0.0, Culture=neutral, PublicKeyToken=********** 'This was not the original value, just hiding it for the post.
for UITypeName
No one here could figure out what the exact issue and how to fix it so my pc was rebuilt. Everything was working just fine until I installed SSMS 2014. Now I am right back where I started.
I really need to know what is going on because I wasted an entire day on trying to figure out this issue and I have already tried reinstalling/repairing VS2010. Removing SSMS 2014. Registering OleDbSrc.dll but get an error when trying to do that.

Somebody on my team had this issue. If I recall correctly you need to re-install SSDT 2012
Arthur My Blog

Has anyone experienced problems with Outlook after installing Mavericks?

Has anyone else experienced problems using Microsoft Outlook after installing Mavericks? The computer seems to want to continue reloading emails.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

Problems with safari after installing Windows 8

After installing Windows 8 , i can't access some websites in Safari
For example i can't login on Binck bank or a webshop
After fill the login details the program file runs , but the login screen remain and the login details diappaers and gone white.
This is on a few websites where i have to use login details but on others such as webmail acounts it works normal.
I have set up safari again and again without succes
What can i do to solve this?

Use IE, FireFox, or Chrome and see if the problem remains. My experience is that Safari has never worked well on Windows.

Navigation problems in IE7 after installing "BI AddOn Patch for GUI 7.10"

Hi,
I am having the following problem:
After installing the BI AddOn Patch for GUI 7.10 (bi710sp07p_701-10004472.exe), Internet Explorer is not behaving normally anymore.
The problem is as follows: When I click on a link with the CTRL-key pressed, then IE7 will open the link in a new tab. However the page does not load anymore in the new tab, the contents will stay empty even though correct address is shown address bar.
The same will happen with pop-ups, so pop-up will appear, but it will not load, page stays white.
When I uninstall the patch then IE7 will work fine again.
For clarity, I am not talking about BEx web reporting here (because we only use BEx Analyzer). The problem occurs when accessing normal webpages like Google (the problem does not depend on the website that was selected).
Anyone have any ideas how to solve this problem?

Also having the same issue doing a full patch upgrade
As a local Admin install the patches in the following order.
1.     bi710sp12p_1201-10004472.exe
2.     bw350gui710_8-10004473.exe
3.     gui710_17-10002995.exe
Getting a number of issues IE7+8 new tabs not working JRE stopped working and issues with excel (3 occasions)
Tried changing the order of the patches and doing full uninstall of sap followed by re-install of sap but the only thing which seems to work is un-install of IE, JRE and Excel then re-install. As you can imagine not very popular.
were going to try out the latest Bex7 1300 patch will let you know how its going
Jon
Edited by: Jon Hoare on Aug 27, 2010 9:38 AM

Serious wifi problems with iMac after installing Mountain Lion

After installing Mountain Lion, I'm experiencing serious trouble with wifi. I noticed that some people had this before with Lion. Can anybody help to solve this problem or should I downgrade to Mountain Lion?
Please help
Thanks in advance!

Thank you for the information Arizonadonn! I'll install 10.8.1 this evening. I really hope you're right after having connection troubles for almost a month now .
If this solves my problem, you'll be my hero !

Problems playing sound after installing 10.4.4

After installing 10.4.4 update, i have a problem when i play some mp3 file in itunes or quicktime 7.0.4, it sounds with jumps and cracking. I've reinstalled the update using the combo, repair permisions, reinstalled quicktime and nothing happens.
Any suggestion?
Thanx

After upgrading to OS 10.4.4 I have no startup chime or sound. I to tried changing the Audio MIDI Setup application (located in Applications/Utilities) and changing the output setting to different settings and back to 44 KHz (44100.0 Hz). It made no difference.iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)

Problems shutting down after installing 10.5.3 update?

Has anyone had any problems shutting down there IMac's after installing 10.5.3 update? I've tried shutting down twice and the image that appears when shutting down seems to go in an endless loop an doesn't shut down.

Can you restart from the menu and hold the shift key down, until the Mac
boots in a SafeBoot login screen; then choose Disk Utility (shortcut under
GO in Finder window, to Utilities folder) and run 'repair disk permissions'
then restart the computer normally...(?)
You may also have to consider starting the computer from the OS X
installer disc and choose from an option menu there (not to install)
and choose to use Disk Utility from the booted installer disc, to run
'repair disk' from there? You could also run 'repair disk permissions'
while booted from that installer disc, but maybe you'd still have to
repair those from the running system for best effect once it is back
running from the hard drive's system.
Some minor issues can happen after an update, usually just repairing
disk permissions before installing the update, and/or running up in
SafeBoot, can help. There are other things to try and do, if these don't
help that much. The state of the system prior to an update is important;
since an update can't fix anything otherwise non-related to an update.
Maintenance issues aside, after you repair disk permissions, safeboot,
and restart, if there still is an issue, you could try to download the Combo
OSX 10.5.3 update file and install it over your system; and then repair
disk permissions again after it finally restarts normally.
Was the 10.5.3 update a smaller (delta) file or was it the Combo (large) file?
Good luck & happy computing!

Problem with chess after installing Leopard

The other week I did an Archive and Install of Leopard on my MacBookPro running Tiger. Several applications failed to work following the install and this has been solved by downloading new versions. Although chess seems to be more problematic. Every time I launch chess I just get a message saying that chess has unexpectedly quit. However this behaviour is starting to become expectable. I have read other posts reporting similar problems after installing Leopard however they are able to play a couple of moves before it quits. For me chess does not even launch.
I have tried trashing the preference file, creating and using a new user account, and copying chess from another computer. The copied application just states that I can not use chess with this version of OSX.
Does anyone have any ideas as I really do not want to have to reinstall Leopard just for a application I only use when very bored (which is surprisingly often).
Thanks for any help you can give.
Chuck

Thanks for pointing out that app. Very useful indeed.
I have deleted my copy of chess and reinstalled a new copy from the OSX Leopard install disk and it still fails to launch.
Any other ideas?

Problems hotsynching addresses after installing Leopard

I've had no problem synching my Tungsten E2 before, but after installing Leopard on my MacBook, the addresses are no longer synching either from my Mac to my handheld or vice versa. The calendar seems to be synching just fine. There's nothing wrong with my conduit setting and the messages tell me the synch "has worked" but obviously it hasn't--there's no changes in either address book. I have addresses both on the computer and the handheld now which don't exist on the other, so I don't want to do a complete override.
I called Palm Tech support and plunked down my $14.95 and the woman there could only tell me to check my conduit settings, something I had already done. No help there.
Also, there are some addresses that are more up to date and correct on one device or on the computer and I can't figure out how to compare the two so I can choose the most recent changes to be the "master."
I'd love any help you can give me. the first problem, obviously is more pressing!
Thanks, Laura
Post relates to: Tungsten E2

Same here with a Centro/ palm phone from Verizon. It's picking up the phone numbers, but leaving nothing for the addresses. It was working fine with synching both addresses and numbers, but it seems like after the latest update, it dropped the addresses. Will be searching other forums for an answer. Using a MacBook Pro with 10.5.5. (Although registering for this forum I could only chose 10.4 as my operating system. Come on Palm... you do know Apple has released a new OS, don't you?)
Post relates to: Centro (Verizon)

Problems con opcenum after installing LabView 2014

Similar Messages

Maybe you are looking for