Problems concerning SPO
Hello,
I have the problem that suddenly a SPO object in productive bw system does not work anymore.
Transformation is inactive. When I try to activate there is the message "Target is not allowed" (Message no. RSTRAN802)
Allready activated SPO without problems. In addition to that I transported SPO from developement system without positive result. Transporting transformations is not possible.
I also tried to activate transformation using report "RSDG_TRFN_ACTIVATE". But I get following message:
How can activate the mentioned target? I did not find a way.
Regards
Jesper
Dear Chandan,
thanks for help. I used RSDG_CUBE_ACTIVATE but inbound infosource is still inactive. I did not find a report in SE38 to activate SPO. I allready transported SPO but without impact on inbound infosource. When I try to transport transformatin to SPO it fails because auf missing inbound infosource.
Problem is that I can not transport infosource manually. It should actually be activated by transporting SPO.
Any ohter ideas?
Best regards
Jesper
Similar Messages
-
Hi, I have a Power Book G4 Tiger 10.4.11 and my problem concerns iTunes 9.2.1(5). I have changed my Apple ID and password recently. Since that, I am told, only when I try to buy something in iTunes Store, that my "session has expired". Where does this come from? What should I do to solve this problem ? I would greatly appreciate your help. Thank you in advance.
Hi, I am khonthaï. I solved the problem thanks to JHdeVilliers's post on 4 Dec. 2011: I removed all cookies in Safari and it worked immediately !!!
-
Problem concerning an automatic renaming on desktop
Hi,
I have a problem concerning my desktop.
Each time I copy a file on the desktop, it is instantly renammed.
A little time ago, i used automator to rename serial and the last sequence i renamed was Fringe.
Now each time i copy a file on the desktop it is renamed "Fringe" but the point is that i do not do anything to have it renamed....
Any suggestion?
Thanks a lot.I just found the solution by searching how to correct it!
I just had to delete the automator workflow into ~/Library/Workflows/Applications/Folder Actions/
Thank you very much for your help! -
Problems concerning Agilent 89410A programming
Hey!
I have a problem concerning Agilent 89410A signal analyzer programming.
The timeout error (-1073807339) and bundle error (-1074003951) pop up during the "Initialize.vi" execution. The time out error exist in the VISA Read part of the VI.
"The given session or object reference is invalid" error (-1073807346) pops up during "Application.vi" and "Close.vi" executions.
Agilent´s "analyzer address" is set to 16" Should I set something else to specific value?
What to do? I need a piece advice!
(please, step by step)Hi,
The -1073807346 error shows that you may be using the wrong resource descriptor.
The first thing you need to do is determine if you are able to communicate with the instrument. Connec the instrument to the GPIB board and power on. In MAX, select "Scan for Instruments". If the instrument is detected (with the ID string) it means that the GPIB communication is working.
Next, open a interactive VISA session. In MAX right-click on the instrument entry and select "Open VISA session". The interactive VISA control will open. Click on the Basic I/O and see if you can perform a Basic read nad write. The control uses the exact same functions used by the instrument driver. If it work, then you'll need to look at your VI.
Use the instrument driver Ge
tting Started VI and see if you can run it. Make sure you are using the right resource descriptor. The resource descriptor should be GPIB::. id is the number that shows up in MAX for the different GPIB interfaces (GPIB0, GPIB1, etc).
Finally, if it doesn't work, troubleshoot the driver using LabVIEW's debugging facilities, such as highlight execution and NI Spy.
NI-Spy toturial
DiegoF
National Instruments -
HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Problem concerning the -U flag
There is a problem concerning the -U Fortran compiler flag in SS12. I use the -U flag in all my projects because, using that flag, capitalization matters (so that, e.g., the compiler treats "foo" and "Foo" as different variables). However, in some projects, although the compiler builds the project correctly, when I try to execute the resulting executable from within SS2, I get the following error message:
make[2]: m2c: Command not found
make[2]: *** [project name] Error 127
make[2]: Leaving directory `[working directory]'
*** Error code 2
..................Note that I can execute it directly (from a terminal window) without any problem. I just cannot execute it by pressing <F6> in SS2. The strange thing is that it does not happen to all my projects, although all of them are based on similar Makefiles. Note also that when I remove the -U flag and rebuild, all projects can be executed from within SS2.With my own Fortran Makefiles (on any platform), I use '.SUFFIXES:' rules to get rid of
any built-in .mod rules for Modula. You have to put a blank .SUFFIXES to flush the
built-in rules, then add your actual suffixes.In fact, a single blank .SUFFIXES solves the problem. Thank you very much for the hint.
However, I still cannot understand why this .SUFFIXES blank line is necessary in some projects while it is not in other (similar) projects.
By default Sun Studio IDE uses GNU make on Linux only. On Solaris
it is using "dmake". Which platform do you use, Linux or Solaris?I use Linux (Debian 4 x64 version). -
I have a problem concerning my icloud mail not my apple store mail...where i cannot access my icloud mail and i forgot my password
Hi, fungo47.
Thank you for visiting Apple Support Communities.
You can reset your Apple ID/iCloud password via the steps in the first article below. If you do not have access to the email account or are not receiving the password reset link, see the second article.
If you forgot your Apple ID password
http://support.apple.com/en-us/HT201487
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H. -
How to solve problems concerning facebook videos+flash player?
dear friends, I have a problem I hope you could solve; since two days ago, when I try to look a video uploaded on facebook, it appears an advice saying that it's necessary to upgrade my flash player...I have an ibook g4 powerpc, tiger 10.4.1, and when I try to go to the download section - your site - I only find upgradings concerning intel processors...but mine is a powerpc...!! how can I solve the problem? please help me!! many thanks in advance!!
Hello, Adobe no longer supports pre-Intell Macs. Here is an "unsupported" link that worked for me. Good Luck... http://www.steelbin.com/FPforFBPPC.zip
-
Problems concerning sonata playlists and freevo cover art
Hi!
I'm setting up a media center PC and I'm having some problems with the playlists created by sonata. Another problem I have is not getting freevo to download cover art.
First: When ever I try to make a playlist through the "Current" tab in Sonata it creates a m3u file with every song that's listed in the current window. I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata? And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Second: I'm having big problems getting freevo to download cover art to my music. I can download info on movies from imdb, but info for the music doesn't work. I store the cover art downloaded by sonata in the different album folders and these covers show up in freevo. But if I have to play every new song i download first in sonata to get the cover art working in freevo I'll go crazy. It's supposed to work the same way in freevo as in sonata isn't it???
It also seems that mplayer can't play m3u files. Using the mentioned sonata made m3u file in mplayer does nothing. Mplayer starts but nothing happens.
My goal is to be able to make playlists through sonata and then play these lists using freevo. I don't want to get up from the couch.
Here's my local_conf.py:
# -*- coding: iso-8859-1 -*-
# local_conf.py - System configuration
# $Id: local_conf.py.example 10508 2008-03-12 07:24:34Z duncan $
# Notes:
# This file contains your freevo settings, overriding the settings in
# freevo_config.py. freevo_config.py, which is usually installed in
# /usr/share/freevo, contains all the core settings. To change the settings copy
# this file to ~/.freevo/local_conf.py or /etc/freevo/local_conf.py
# It does not contain all the possible settings that you can change, see
# freevo_config.py for all the possible settings. Also it does not contain
# settings for the plug-ins, plug-ins contain their configuration information and
# the can be listed with:
# | freevo plugins -l
# and the settings can se shown with
# | freevo plugins -i <name of plug-in>
# E.g.: when you want a alsa as mplayer audio out, just put in local_conf.py:
# | MPLAYER_AO_DEV = 'alsa9'
# The vertical line indicates code.
# This is no normal config file, it's Python code. Because of that, you
# need to follow some rules to avoid crashes. The examples should explain
# the settings, but make sure a line starting with a variable has NO SPACES OR
# TABS at the beginning.
# Freevo - A Home Theater PC framework
# Copyright (C) 2002 Krister Lagerstrom, et al.
# Please see the file freevo/Docs/CREDITS for a complete list of authors.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MER-
# CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
CONFIG_VERSION = 5.23
# ======================================================================
# General freevo settings:
# ======================================================================
# LOCALE='iso-8859-15'
# AUDIO_DEVICE = '/dev/dsp' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# AUDIO_INPUT_DEVICE = '/dev/dsp1' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# MIXER_MAJOR_CTRL = 'VOL' # Freevo takes control over one audio ctrl
# 'VOL', 'PCM' 'OGAIN' etc.
# MIXER_MAJOR_MUTE_CTRL = 'PCM' # used in alsamixer.py There are systems where
# volume and mute use different controls
# MIXER_DEVICE = '/dev/mixer' # mixer device
# MIXER_CONTROL_ALL = 1 # Should Freevo take complete control of audio
# MIXER_VOLUME_MAX = 90 # Set what you want maximum volume level to be.
# MIXER_VOLUME_DEFAULT = 40 # Set default volume level.
# MIXER_VOLUME_TV_IN = 60 # Set this to your preferred level 0-100.
# MIXER_VOLUME_VCR_IN = 90 # If you use different input from TV
# MIXER_VOLUME_RADIO_IN = 80 # Set this to your preferred level 0-100.
START_FULLSCREEN_X = 1 # Start in fullscreen mode if using x11 or xv.
# SYS_SHUTDOWN_CONFIRM = 1 # ask before shutdown
# Physical ROM drives, multiple ones can be specified
# by adding comma-seperated and quoted entries.
# Format [ ('mountdir1', 'devicename1', 'displayed name1'),
# ('mountdir2', 'devicename2', 'displayed name2'), ...]
# Set to None to autodetect drives in during startup from /etc/fstab,
# set to [] to disable rom drive support at all
# ROM_DRIVES = None
# Hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs.
HIDE_UNUSABLE_DISCS = 1
# Attempt to set the speed of the ROM drive. A good value for keeping the
# drive silent while playing movies is 8.
# ROM_SPEED = 0
# Perform a whole system shutdown at SHUTDOWN! Useful for standalone boxes.
# SYS_SHUTDOWN_ENABLE = 0
# Command to execute to shutdown the system
# SYS_SHUTDOWN_CMD = "sudo shutdown -h now"
# SYS_RESTART_CMD = "sudo shutdown -r now"
# ======================================================================
# AUTOSHUTDOWN CONFIGURATION
# ======================================================================
# replace the default shutdown plugin
# plugin.remove('shutdown')
# plugin.activate('autoshutdown', level=90)
# activate the timer
# plugin.activate('autoshutdown.autoshutdowntimer')
# -- autoshutdown menu item configuration --
# SYS_SHUTDOWN_CONFIRM
# Set to True to popup dialog boxes for confirmation.
# this applies to menu items only.
# AUTOSHUTDOWN_CONFIRM = True
# -- autoshutdown timer configuration --
# TIMER_TIMEOUT
# Set the timeout in minutes after which the system
# is shutdown. The allowed idle time and the running
# processes (see below) are evaluated to determine if
# a shutdown is allowed. Menu navigation in freevo will
# reset the timer.
# AUTOSHUTDOWN_TIMER_TIMEOUT=30
# -- autoshutdown behaviour configuration --
# PRETEND
# Set to True to disable the actual shutdown command.
# AUTOSHUTDOWN_PRETEND = False
# PROCESS_LIST
# List the processes that will prevent an automatic
# shutdown. If there are important programs that
# should not be interrupted, then add them to this
# list. Set to None if a shutdown is always allowed.
# AUTOSHUTDOWN_PROCESS_LIST = [
# 'emerge',
# 'tvgids',
# 'transcode',
# 'cdrecord',
# 'mplayer',
# 'top'
# DEFAULT_WAKEUP_TIME
# Set the default time at which to wakeup if there
# are no recordings scheduled. The time is specified
# in localtime 24 hour format. Set to None to disable
# default wakeup time.
# AUTOSHUTDOWN_DEFAULT_WAKEUP_TIME = "13:00"
# FORCE_DEFAULT_WAKEUP
# Set to True to always wakeup at the default wakeup
# time. Set to False to only wakeup at the default
# wakeup time when no recordings are scheduled.
# AUTOSHUTDOWN_FORCE_DEFAULT_WAKEUP = True
# ALLOWED_IDLE_TIME
# The number of minutes that may be spent idle until
# the next scheduled recording or default wakeup. That
# is, if the gap between "now" and the next recording
# or default wakeup is less than the allowed idle time
# then a shutdown is not performed but the system is
# left running. If the period from now to the next
# recording or default wakeup is more than the allowed
# idle time, then the system is shut down and a wakeup
# is scheduled. Use this to minimize the number of
# shutdown/boot sequences when many short programs are
# recorded in a short period of time. Note that this
# variable is used by both the timer and the menu.
# AUTOSHUTDOWN_ALLOWED_IDLE_TIME = 45
# -- Choice of wakeup method
# The wakeup can be done via acpi-alarm or nvram-wakeup.
# AUTOSHUTDOWN_METHOD = 'acpi'
# AUTOSHUTDOWN_METHOD = 'nvram'
# -- autoshutdown acpi-alarm configuration
# This method uses the wakeup on alarm function that most BIOSs have.
# The wakeup time is set by a simple
# "echo 2004-08-02 20:15:00 >/proc/acpi/alarm"
# On most mainbords you will have to ENABLE "Wake on Timer", "Resume on Alarm",
# "RTC Alarm Resume" or similar things for the acpi wakeup method to work.
# If you want to use acpi, you need to create a small script:
# !/bin/sh
# echo "$1" >/proc/acpi/alarm
# You have to be root or use sudo for this to work.
# AUTOSHUTDOWN_WAKEUP_CMD = sudo /PATH/TO/set_acpi.sh
# -- autoshutdown nvram-wakeup configuration --
# The nvram-wakeup utility is used to write the
# wakeup alarm to the RTC in bios. Read the
# nvram-wakeup documentation about this topic,
# a working nvram-wakeup configuration is needed.
# WAKEUP_CMD / NVRAM_OPT
# Path to nvram-wakeup and options. Options can
# be used to specify a config file.
# AUTOSHUTDOWN_WAKEUP_CMD = "/usr/bin/nvram-wakeup"
# AUTOSHUTDOWN_NVRAM_OPT = "--syslog"
# WAKEUP_NEEDS_REBOOT
# Set to True if the bios needs a reboot to catch
# up with the rtc alarm that nvram-wakeup sets. The
# boot loader options should be set too. Read the
# nvram-wakeup documentation about this topic.
# AUTOSHUTDOWN_BIOS_NEEDS_REBOOT = True
# -- if the bios needs a reboot --
# BOOT_LOADER
# Set to "GRUB" or "LILO" Only needed if bios needs
# a reboot to initialize the RTC wakeup call.
# AUTOSHUTDOWN_BOOT_LOADER = "GRUB"
# REMOUNT_BOOT_CMD / REMOUNT_BOOT_OPT
# Grub needs to write to /boot/grub/grub.conf. Set
# the command and options to remount the /boot
# partition writeable. Set to None if this is not
# needed.
# AUTOSHUTDOWN_REMOUNT_BOOT_CMD = "/bin/mount"
# AUTOSHUTDOWN_REMOUNT_BOOT_OPT = "/boot -o remount,rw"
# GRUB_CMD / GRUB_OPT
# Grub-set-default command and options that will
# reboot and poweroff the system.
# AUTOSHUTDOWN_GRUB_CMD = "/sbin/grub-set-default 0"
# AUTOSHUTDOWN_GRUB_OPT = "0"
# LILO_CMD / LILO_OPT
# Lilo command with options that will reboot and
# poweroff the system.
# AUTOSHUTDOWN_LILO_CMD = "/sbin/lilo"
# AUTOSHUTDOWN_LILO_OPT = "-R PowerOff"
# ======================================================================
# Events
# ======================================================================
# You can add more keybindings by adding them to the correct hash.
# e.g. If you want to send 'contrast -100' to mplayer by pressing the '1' key,
# just add the following line:
# EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')
# See src/event.py for a list of all possible events.
# Some events to jump to menus
# EVENTS['menu']['GUIDE'] = Event(MENU_GOTO_TVGUIDE) # Not working
# EVENTS['menu']['VIDEOS'] = Event(MENU_GOTO_VIDEOS)
# EVENTS['menu']['MUSIC'] = Event(MENU_GOTO_MUSIC)
# EVENTS['menu']['PICTURES'] = Event(MENU_GOTO_IMAGES)
# EVENTS['menu']['GAMES'] = Event(MENU_GOTO_GAMES)
# EVENTS['menu']['RADIO'] = Event(MENU_GOTO_RADIO) # Not working
# EVENTS['menu']['POWER'] = Event(MENU_GOTO_SHUTDOWN)
# Use arrow keys for back and select (alternate way of navigating)
# MENU_ARROW_NAVIGATION = False
# Process keyboard events from SDL. You want this unless you use only lirc
# or event devices below.
# USE_SDL_KEYBOARD = True
# Keymap to map keyboard keys to event strings. You can also add new keys
# here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by pygame.
# List of /dev/input/event# devices to monitor. You can specify either the
# device node (e.g. '/dev/input/event1') or the name of the device (e.g.
# 'ATI Remote Wonder II'). If you monitor your keyboard both here and with
# USE_SDL_KEYBOARD, then you will get duplicate events.
EVENT_DEVS = []
# Keymap to map input events to event strings. You can change current mappings
# and add new ones here, e.g. EVENTMAP['KEY_COFFEE'] = 'SUBTITLE'. Key names
# are defined by the Linux input layer (input.h). An axis is described by a
# pair, one for positive and one for negative movement, e.g.
# EVENTMAP['REL_Z'] = ('LEFT', 'RIGHT')
# Use Internet resources to fetch information?
# For example, Freevo can use CDDB for album information,
# the IMDB movie database for movie info, and Amazon for cover searches.
# Set this to 0 if your computer isn't connected to a network.
USE_NETWORK = 1
# Directory location to save files when the normal filesystem
# doesn't allow saving. This directory can save covers and fxd files
# for read only filesystems like ROM drives. Set this variable to your
# old MOVIE_DATA_DIR if you have one. It needs to be set to a directory
# Freevo can write to.
# OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs')
# Umask setting for all files.
# 022 means only the user has write access. If you share your Freevo
# installation with different users, set this to 002
# UMASK = 022
# Suffix for playlist files
PLAYLIST_SUFFIX = [ 'm3u' ]
# Use md5 in mmpython to create unique disc ids. Enable this if you have
# problems with different discs having the same id.
# MMPYTHON_CREATE_MD5_ID = 0
# Keep metadata in memory
# Setting this variable will keep all cache files in memory. Startup will be
# slower, but for large directories, this will speed up the display.
# 0 = Only keep current dir in memory. Use this if you have too much data
# and not enough RAM
# 1 = Once loaded, keep cachefile for directory in memory
# 2 = Load all cachefiles on startup
# WARNING: you should not run 'freevo cache' when freevo is running.
# MEDIAINFO_USE_MEMORY = 1
# Cache images. This uses a lot of disc space but it's a huge speed
# enhancement. The images will be cached in OVERLAY_DIR
CACHE_IMAGES = 1
# ======================================================================
# Plugins:
# ======================================================================
# Remove undesired plugins by setting plugin.remove(code).
# You can also use the name to remove a plugin. But if you do that,
# all instances of this plugin will be removed.
# Examples:
# plugin.remove(plugin_tv) or
# plugin.remove('tv') will remove the tv module from the main menu
# plugin.remove(rom_plugins['image']) will remove the rom drives from the
# image main menu,
# plugin.remove('rom_drives.rom_items') will remove the rom drives from all
# menus
# See freevo_config.py for a list of loaded plugins
plugin.remove('tv')
plugin.remove('headlines')
plugin.remove('idlebar.tv')
plugin.remove('idlebar.diskfree')
plugin.remove('file_ops')
plugin.remove('tv.generic_record')
plugin.remove('tv.view_recordings')
plugin.remove('tv.mplayer')
plugin.remove('tv.manual_record')
plugin.remove('tv.scheduled_recordings')
plugin.remove('tv.view_favorites')
plugin.remove('video.moviecovers')
# User setup
plugin.activate('audio.coversearch')
# plugin.activate('video.moviecovers')
plugin.activate('video.details')
# list of regexp to be ignored on a disc label
IMDB_REMOVE_FROM_LABEL = ('season[\._ -][0-9]+', 'disc[\._ -][0-9]+',
'd[\._ -][0-9]+', 'german')
# list of words to ignore when searching based on a filename
IMDB_REMOVE_FROM_SEARCHSTRING = ('the', 'a')
# When searching for a movie title in imdb, should the result be
# autoaccepted if it is only one hit?
# 0 = show menu even if it is only one hit (gives you an opportunity to cancel)
# 1 = autoaccept
IMDB_AUTOACCEPT_SINGLE_HIT = 1
SCREENSAVER_DELAY = 30 # of seconds to wait to start saver.
SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
plugin.activate('screensaver')
# Use ivtv_record instead if you have an ivtv based card (PVR-250/350)
# and want freevo to do everthing for you. TV_SETTINGS must be set
# correctly. To use you need to set the following two lines:
# plugin.remove('tv.generic_record')
# plugin_record = plugin.activate('tv.ivtv_record')
# Enable this for joystick support:
# plugin.activate('joy')
# Headlines
# You are free to use any rss feeds in the HEADLINES_LOCATIONS below
# These are just working examples for the Freevo feeds.
# To turn off Headlines add plugin.remove('headlines')
# plugin.activate('headlines', level=45)
# HEADLINES_LOCATIONS = [
# ('Freevo news releases', 'http://sourceforge.net/export/rss2_projnews.php?group_id=46652'),
# ('Freevo file releases', 'http://sourceforge.net/export/rss2_projfiles.php?group_id=46652'),
# ('Freevo summary+stats', 'http://sourceforge.net/export/rss2_projsummary.php?group_id=46652'),
# ('Freevo donors', 'http://sourceforge.net/export/rss2_projdonors.php?group_id=46652'),
# CD Ripping
# CD_RIP_TMP_DIR = '/tmp/'
# CD_RIP_TMP_NAME = 'track_%(track)s_being_ripped'
# CD_RIP_PN_PREF = '%(artist)s/%(album)s/%(track)s - %(song)s'
# CD_RIP_CDPAR_OPTS = '-s'
# CD_RIP_LAME_OPTS = '--vbr-new -b 192 -h'
# CD_RIP_OGG_OPTS = '-m 128'
# CD_RIP_FLAC_OPTS = '-8'
# CD_RIP_CASE = None # Can be title, upper, lower
# CD_RIP_REPLACE_SPACE = None # Can be '_', '-', etc.
# CD Burning
# CDBURN_AUDIO_DAO = 1
# CDBURN_MKISOFS_PATH = '/usr/bin/mkisofs'
# CDBURN_CDRECORD_PATH = '/usr/bin/cdrecord'
# CDBURN_TEMP_DIR='/tmp/'
# CDBURN_DEV = '/dev/cdrom'
# CDBURN_SPEED = 32
# Re-encode
# This plug-in transcodes a video to a different format
# plugin.activate('video.reencode')
# REENCODE_CONTAINER = 'avi'
# REENCODE_RESOLUTION = 'Optimal'
# REENCODE_VIDEOCODEC = 'XviD'
# REENCODE_VIDEOBITRATE = 1000
# REENCODE_AUDIOCODEC = 'MPEG 1 Layer 3 (mp3)'
# REENCODE_AUDIOBITRATE = 128
# REENCODE_NUMPASSES = 1
# REENCODE_VIDEOFILTER = None
# Freevo Music Player Daemon
# http://www.musicpd.org/
# plugin.activate('mpd')
# Freevo Bluetooth Phone Settings
# This plugin uses The Python bindings for Bluez bluetooth stack.
# It can be downloaded from http://org.csail.mit.edu/pybluez/download.html
# or installed with the package manager of your operating system.
# To this plugin to work you need the j2me midlet installed in a compatible
# phone.
# plugin.activate('freevused')
# if RFCOMM port is already binded wait this seconds to retry binding
# FVUSED_BIND_TIMEOUT = 30
# Translation of commands from j2me client to events of Freevo
# FVUSED_CMDS = {
# 'PREV': 'UP', # 1st row left
# 'STRT': 'SELECT', # 1nd row center
# 'NEXT': 'DOWN', # 1st row right
# 'RWND': 'LEFT', # 2nd row left
# 'PAUS': 'PAUSE', # 2nd row center
# 'FFWD': 'RIGHT', # 2nd row right
# 'VOL-': 'MIXER_VOLDOWN', # 3rd row left
# 'STOP': 'EXIT', # 3rd row center
# 'VOL+': 'MIXER_VOLUP', # 3rd row right
# 'VOLM': 'MIXER_VOLMUTE', # 4th row left
# 'SLCT': 'ENTER', # 4th row center
# 'MAIN': 'MENU' # 4th row right
# Freevo Button Bar Plug-in
# plugin.activate('buttonbar')
# You'll also need to map the 'RED', 'GREEN', 'YELLOW'
# and 'BLUE' events to keys for example (don't use this
# it overrides some default keys)
# KEYMAP[key.K_F5] = 'RED'
# KEYMAP[key.K_F6] = 'GREEN' #Already mapped to record
# KEYMAP[key.K_F7] = 'YELLOW'
# KEYMAP[key.K_F8] = 'BLUE'
# Freevo Screensaver Plug-in
# SCREENSAVER_DELAY = 120 # of seconds to wait to start saver.
# SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
# plugin.activate('screensaver')
# plugin.activate('screensaver.balls') # Bouncing balls all over the screen
# plugin.activate('screensaver.bouncing_freevo') # The freevo logo bouncing around the screen
# ======================================================================
# Freevo directory settings:
# ======================================================================
# You can change all this variables in the folder.fxd on a per folder
# basis
# Example:
# <freevo>
# <folder title="Title of the directory" img-cover="nice-cover.png">
# <setvar name="directory_autoplay_single_item" val="0"/>
# <info>
# <content>A small description of the directory</content>
# </info>
# </folder>
# </freevo>
# Should directories sorted by date instead of filename?
# 0 = No, always sort by filename.
# 1 = Yes, sort by date
# 2 = No, don't sory by date for normal directories,
# but sort by date for TV_RECORD_DIR.
DIRECTORY_SORT_BY_DATE = 0
# Should directory items be sorted in reverse order?
# DIRECTORY_REVERSE_SORT = 0
# Should we use "smart" sorting?
# Smart sorting ignores the word "The" in item names.
DIRECTORY_SMART_SORT = 1
# Should files in directories have smart names?
# This removes the first part of the names when identical
# DIRECTORY_SMART_NAMES = 1
# Should Freevo autoplay an item if only one item is in the directory?
DIRECTORY_AUTOPLAY_SINGLE_ITEM = 0
# Force the skin to use a specific layout number. -1 == no force. The layout
# toggle with DISPLAY will be disabled
# DIRECTORY_FORCE_SKIN_LAYOUT = -1
# Format string for the audio item names.
# Possible strings:
# a=artist, n=tracknumber, t=title, y=year, f=filename
# Example:
# This will show the title and the track number:
# DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s'
# DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s'
# Use media id tags to generate the name of the item. This should be
# enabled all the time. It should only be disabled for directories with
# broken tags.
DIRECTORY_USE_MEDIAID_TAG_NAMES = 1
# The following settings determine which features are available for
# which media types.
# If you set this variable in a folder.fxd, the value is 1 (enabled)
# or 0 (disabled).
# Examples:
# To enable autoplay for audio and image files:
# DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ]
# To disable autoplay entirely:
# DIRECTORY_AUTOPLAY_ITEMS = []
# Make all items a playlist. So when one is finished, the next one will
# start. It's also possible to browse through the list with UP and DOWN
# DIRECTORY_CREATE_PLAYLIST = [ 'audio', 'image' ]
# Add playlist files ('m3u') to the directory
# DIRECTORY_ADD_PLAYLIST_FILES = [ 'audio', 'image' ]
# Add the item 'Random Playlist' to the directory
# DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ]
# Make 'Play' not 'Browse' the default action when only items and not
# subdirectories are in the directory
# DIRECTORY_AUTOPLAY_ITEMS = [ ]
# ======================================================================
# Freevo movie settings:
# ======================================================================
# Where the movie files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
VIDEO_ITEMS = [
('movies', '/home/per/movies'),
('movies extra', '/extra/movies'),
('tv', '/home/per/tv'),
('tv extra', '/extra/tv'),
# Some people access movies on a different machine using an automounter.
# To avoid timeouts, you can specify the machine name in the directory
# to check if the machine is alive first
# Directory myserver:/files/server-stuff will show the item for the
# directory /files/server-stuff if the computer myserver is alive.
# The list of filename suffixes that are used to match the files that
# are played wih MPlayer.
# VIDEO_MPLAYER_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm',
# 'divx', 'ogm', 'vob', 'asf', 'm2v', 'm2p',
# 'mp4', 'viv', 'nuv', 'mov', 'iso',
# 'nsv', 'mkv' ]
# The list of filename suffixes that are used to match the files that
# are played wih Xine.
# VIDEO_XINE_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm',
# 'asf', 'm2v', 'm2p', 'mp4', 'mov', 'cue' ]
# Preferred video player
VIDEO_PREFERED_PLAYER = 'mplayer'
# Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing
# information about a disc. If you only have the fxd files for discs in
# one of this directories (and subdirectories), set this to 1, it will
# speed up startup, 0 may be needed if you have fxd files with disc links
# in your normal movie tree.
# VIDEO_ONLY_SCAN_DATADIR = 1
# try to detect a movie with more than one file and join them as one
# item
VIDEO_AUTOJOIN = 1
# try to find out if deinterlacing is needed or not
# VIDEO_DEINTERLACE = None
# Instruct player to use XVMC for playback
# VIDEO_USE_XVMC = None
# Pass field dominance parameter to MPlayer
# VIDEO_FIELD_DOMINANCE = None
# PRE and POST playing commands. Set these to a runnable command if
# you wish to do something before and after playing a video, like
# dimming the lights
# VIDEO_PRE_PLAY = None
# VIDEO_POST_PLAY = None
# ======================================================================
# Freevo audio settings:
# ======================================================================
# Where the Audio (mp3, ogg) files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
# To add webradio support, add fxd/webradio.fxd to this list
AUDIO_ITEMS = [
('music', '/home/per/music'),
('music extra', '/extra/music'),
('playlists', '/home/per/.mpd/playlists'),
# The list of filename suffixes that are used to match the files that
# are played as audio.
# AUDIO_SUFFIX = [ 'mp3', 'ogg', 'wav','m4a', 'wma', 'aac', 'flac', 'mka' ]
# Regular expression used to recognize filenames which are likely to be
# covers for an album
# This will match front.jpg and cover-f.jpg, but not back.jpg nor cover-b.jpg:
# AUDIO_COVER_REGEXP = 'front|-f'
# Format strings used to seach for audio cover images.
# Fist matching GIF, JPG or PNG image will be used as cover.
# Examples:
# AUDIO_COVER_FORMAT_STRINGS = [ 'cover-%(artist)s-%(album)s', 'mycover' ]
# AUDIO_COVER_FORMAT_STRINGS = [ '%(album)s', '../covers/%(album)s', '../covers/nocover' ]
# Preferred audio player
AUDIO_PREFERED_PLAYER = 'mplayer'
# Show video files in the audio menu (for music-videos)
AUDIO_SHOW_VIDEOFILES = False
# ======================================================================
# Freevo image viewer settings:
# ======================================================================
# Where image files can be found.
# This is a list of items (e.g. directories, fxd files). The items itself
# can also be a list of (title, file)
IMAGE_ITEMS = [
('pictures', '/home/per/pictures'),
# The list of filename suffixes that are used to match the files that
# are used for the image viewer.
# IMAGE_SUFFIX = [ 'jpg','gif','png','jpeg','bmp','tiff','psd' ]
# The viewer now supports a new type of menu entry, a slideshow file.
# It also has the slideshow alarm signal handler for automated shows.
# It uses a new configuration option:
# IMAGE_SSHOW_SUFFIX = [ 'ssr' ]
# The viewer can exclude certain types of images based on the regular expression list
# eg IMAGE_EXCLUDE = [('thm','tn_')]
# IMAGE_EXCLUDE = None
# Mode of the blending effect in the image viewer between two images
# Possible values are:
# None: no blending
# -1 random effect
# 0 alpha blending
# 1 wipe effect
IMAGEVIEWER_BLEND_MODE = -1
# When viewing images on a TV screen where the pixels are not square
# the images need to be scaled according to the aspect ratio of the TV
# Use this setting for 16x9 TVs
# IMAGEVIEWER_ASPECT = (float(1024) / float(720))
# Use this setting for 4x3 TVs
# IMAGEVIEWER_ASPECT = (float(768) / float(720))
# Use this setting for Monitors including HDTVs
# IMAGEVIEWER_ASPECT = 1.0
# IMAGEVIEWER_ASPECT = 1.0
# ======================================================================
# Freevo games settings:
# ======================================================================
# MAME is an emulator for old arcade video games. It supports almost
# 2000 different games! The actual emulator is not included in Freevo,
# you'll need to download and install it separately. The main MAME
# website is at http://www.mame.net, but the version that is used here
# is at http://x.mame.net since the regular MAME is for Windows.
# SNES stands for Super Nintendo Entertainment System. Freevo relies
# on other programs that are not included in Freevo to play these games.
# NEW GAMES SYSTEM :
# =================
# The GAMES_ITEMS structure is now build as follows :
# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \
# [<FILE_SUFFIX_FOR_GENERIC>])
# where :
# - <TYPE> : Internal game types (MAME or SNES) or
# generic one (GENERIC)
# - <COMMAND_PATH> : Emulator command
# - <COMMAND_ARGS> : Arguments for the emulator
# - <IMAGE_PATH> : Optionnal path to the picture
# - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC
# type, then you must specify here
# the file suffix used by the emulator
# GAMES_ITEMS = [
# ('MAME', '/home/media/games/xmame/roms',
# ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6',
# '/home/media/games/xmame/shots', None)),
# ('SUPER NINTENDO', '/home/media/games/snes/roms',
# ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),
# ('Visual Boy Advance', '/home/media/games/vba/roms/',
# ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', [ 'gba' ] )),
# ('MEGADRIVE', '/home/media/games/megadrive/roms',
# ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' ))
# GAMES_ITEMS = None
# These settings are used for the MAME arcade emulator:
# Priority of the game process
# 0 = Don't change the priority
# >0 - Lower priority
# <0 - Higher priority
# GAMES_NICE = -20
# MAME cache directory
# GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())
# ======================================================================
# Freevo SKIN settings:
# ======================================================================
# XML file for the skin. If SKIN_XML_FILE is set, this skin will be
# used, otherwise the skin will rememeber the last choosen skin.
# SKIN_XML_FILE = 'blurr'
# Select a way when to switch to text view even if a image menu is there
# 1 = Force text view when all items have the same image and there are no
# directories
# 2 = Ignore the directories, always switch to text view when all images
# are the same
# SKIN_FORCE_TEXTVIEW_STYLE = 1
# Force text view for the media menu
# (The media menu is the first menu displayed for video, audio, images
# and games).
# SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0
# ======================================================================
# Freevo OSD settings:
# ======================================================================
# System Path to search for fonts not included in the Freevo distribution
# OSD_EXTRA_FONT_PATH = [ '/usr/share/fonts/truetype' ]
# Font aliases
# All names must be lowercase! All alternate fonts must be in './share/fonts/'
# OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'VeraBd.ttf' }
# For non-european character sets the OSD_FORCE_FONTNAME and
# OSD_FORCE_FONTSIZE can be set. The size is a scaling ratio, ie 1.2.
# Setting OSD_FORCE_FONTNAME='batang.ttf' and OSD_FORCE_FONTSIZE=1.0
# allows Korean characters.
# OSD_FORCE_FONTNAME = None
# OSD_FORCE_FONTSIZE = None
# Number of seconds to wait until the busy icon is shown in the menu.
# Busy icon can also be shown right away when there is more than a certain
# number of files in a directory.
# Set this to None to disable this.
# (seconds, files)
# OSD_BUSYICON_TIMER = (0.7, 200)
# Number of pixels to move the display to centre the OSD on the display
# OSD_OVERSCAN_LEFT = OSD_OVERSCAN_RIGHT = 0
# OSD_OVERSCAN_TOP = OSD_OVERSCAN_BOTTOM = 0
# Setting the cursors when freevo is run in fullscreen mode
# OSD_X11_CURSORS = '/usr/lib/X11/cursors/black.cursor /usr/lib/X11/cursors/blank.cursor'
# Execute a script on OSD startup.
# OSD_SDL_EXEC_AFTER_STARTUP = ""
# Execute a script on OSD close.
# OSD_SDL_EXEC_AFTER_CLOSE = ""
# Stop the osd before playing a movie with xine or mplayer. Some output
# devices need this. After playback, the osd will be restored
# OSD_STOP_WHEN_PLAYING = 0
# Dim text that doesn't fit instead of using ellipses.
# OSD_DIM_TEXT = 1
# OSD sound effects
# OSD_SOUNDS_ENABLED=False
# OSD_SOUNDS= {
# 'menu.navigate': None,
# 'menu.back_one': None,
# 'menu.select' : None
# ======================================================================
# Freevo remote control settings:
# ======================================================================
# Location of the lircrc file
# For remote control support, Freevo needs a lircrc file, like this:
# begin
# prog = freevo
# button = select
# config = SELECT
# end
# Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter
# script.
# LIRCRC = '/etc/freevo/lircrc'
# Joystick support
# 0 = Disable joystick support
# 1 = Use js0,
# 2 = Use js1,
# ... etc
# JOY_DEV = 0
# JOY_SENS = 32000
# JOY_LOCKFILE = /path/to/joystick/lockfile
# Freevo can support as many buttons as your controller has
# as long as there is a corresponding entry in JOY_CMDS.
# You will also need to plugin.activate('joy').
# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX
# JOY_CMDS = {
# 'up' : 'UP',
# 'down' : 'DOWN',
# 'left' : 'LEFT',
# 'right' : 'RIGHT',
# 'button 1' : 'PLAY',
# 'button 2' : 'PAUSE',
# 'button 3' : 'STOP',
# 'button 4' : 'ENTER',
# Here are the PS3 joy stick mappings
# JOY_CMDS = {
# 'button 5' : 'UP',
# 'button 7' : 'DOWN',
# 'button 8' : 'LEFT',
# 'button 6' : 'RIGHT',
# 'up' : 'UP',
# 'down' : 'DOWN',
# 'left' : 'LEFT',
# 'right' : 'RIGHT',
# 'button 14' : 'SELECT', # <circle>
# 'button 16' : 'EXIT', # <square>
# 'button 15' : 'STOP', # <x>
# 'button 1' : 'ENTER', # <select>
# 'button 11' : 'VOL+', # <L1>
# 'button 9' : 'VOL-', # <L2>
# 'button 2' : 'MUTE', # <L3>
# 'button 10' : 'MUTE', # <R2>
# 'button 4' : 'PLAY', # <start>
# 'button 13' : 'PLAY', # <start>
# 'button 17' : 'MENU', # <ps>
# ======================================================================
# TVtime settings:
# ======================================================================
# Location of the TV time program
# Default: Use the value in freevo.conf
# TVTIME_CMD = CONF.tvtime
# ======================================================================
# MPlayer settings:
# ======================================================================
# MPLAYER_AO_DEV = 'oss:/dev/dsp' # e.g.: oss,sdl,alsa, see mplayer docs
# MPLAYER_VO_DEV_OPTS = '' # e.g.: ':some_var=vcal'
# DVD_LANG_PREF = 'en,se,no' # Order of preferred languages on DVD.
# DVD_SUBTITLE_PREF = '' # Order of preferred subtitles on DVD.
# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.
# prio <0 has no effect unless run as root.
# MPLAYER_NICE = -20
# Mplayer options to use the software scaler. If your CPU is fast enough, you
# might try a software scaler. You can disable it later for some larger files
# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop
# as mplayer option, the software scaler will also not be used.
# A good value for this variable is:
# MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\
# "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )
# older versions of mplayer may need
# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width
# MPLAYER_SOFTWARE_SCALER = ''
# Mplayer arguments for different media formats. (eg DVDs, CDs, AVI files, etc)
# Uses a default value if nothing else matches.
# MPLAYER_ARGS = { 'dvd' : '-cache 8192',
# 'vcd' : '-cache 4096',
# 'cd' : '-cache 1024 -cdda speed=2',
# 'tv' : '-nocache',
# 'ivtv' : '-cache 8192',
# 'avi' : '-cache 5000 -idx',
# 'rm' : '-cache 5000 -forceidx',
# 'rmvb' : '-cache 5000 -forceidx',
# 'webcam' : 'tv:// -tv driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/video2',
# 'default': '-cache 5000'
# Number of seconds before seek value times out. This is used when
# seeking a specified number of minutes into a movie. If you make
# a mistake or change your mind, the seek value will timeout after
# this many seconds.
# MPLAYER_SEEK_TIMEOUT = 8
# Autocrop files when playing. This is useful for files in 4:3 with black
# bars on a 16:9 tv
# MPLAYER_AUTOCROP = 0
# Try to set correct 'delay' and 'mc' values for mplayer based on the delay
# from mmpython.
# This should correct av sync problems with mplayer for some files, but
# may also break things. (I don't know, that's why it's disabled by default).
# WARNING: When seeking, the playback is out of sync for some seconds!
# MPLAYER_SET_AUDIO_DELAY = 0
# Mplayer video filter for interlaced or progressive videos. If you have
# a slow pc, do not use post processing
# MPLAYER_VF_INTERLACED = ''
# MPLAYER_VF_PROGRESSIVE = 'pp=fd'
# For pal and dvb-t recordings, the following looks good
# MPLAYER_VF_INTERLACED = 'pp=md/de,phase=U'
# MPLAYER_VF_INTERLACED = 'pp=de/fd'
# MPLAYER_VF_PROGRESSIVE = 'pp=de'
# For the autodetect TOP/BOTTOM field first in mplayer
# (if this feature present in mplayer)
# MPLAYER_HAS_FIELD_DOMINANCE = 1
# ======================================================================
# Xine settings:
# ======================================================================
# You need xine-ui version greater 0.9.21 to use the all the features
# of the xine plugin
# XINE_VO_DEV = 'xv'
# XINE_COMMAND = '%s --auto-play=fq --hide-gui --borderless --geometry %sx%s+0+0 --no-splash' % \
# (CONF.xine, CONF.width, CONF.height)
# XINE_ARGS_DEF = "--no-lirc --post='pp:quality=10;expand'"
# XINE_AO_DEV = 'oss' # alsa or oss
# Set to False if xine doesn't have '--no-lirc' option
# XINE_HAS_NO_LIRC = True
# Set to True is xine supports get_time this enables the position to be saved
# XINE_BOOKMARK = False
# ======================================================================
# Freevo TV settings:
# ======================================================================
# This is where recorded video is written.
# XXX the path doesn't work from the www cgi scripts!
# TV_RECORD_DIR = None
# This will enable duplicate recording detection
# TV_RECORD_DUPLICATE_DETECTION = True
# This will enable only new episodes to be recorded
# TV_RECORD_ONLY_NEW_DETECTION = True
# ================================================================================
# Watching TV
# ================================================================================
# XXX You must change this to fit your local conditions!
# NORM: ntsc, pal, secam
# INPUT: television, composite1
# CHANLIST: One of the following:
# us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,
# europe-east, italy, newzealand, australia, ireland, france, china-bcast,
# southafrica, argentina, canada-cable, russia
# TV_SETTINGS = 'NORM INPUT CHANLIST DEVICE'
# Video input device
# Usually /dev/video0, but might be /dev/video1 instead for multiple boards.
# FreeBSD uses the Brooktree TV-card driver, not V4L.
# TV_DRIVER = 'v4l'
# TV_DEVICE = '/dev/video0'
# TV_INPUT = 0
# ================================================================================
# Listening to radio
# ================================================================================
# Radio device default is None, /dev/video24 for ivtv
# RADIO_DEVICE = '/dev/radio'
# Radio commands:
# plugin.activate('audio.radioplayer')
# plugin.activate('audio.radio')
# for fmtools
# RADIO_CMD = 'fm'
# RADIO_CMD_START = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q %s 65535')
# RADIO_CMD_STOP = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q off')
# for ivtv-radio
# RADIO_CMD = '/usr/bin/ivtv-radio -d /dev/radio0 -i /dev/video24'
# RADIO_STATIONS = [
# ('DRS 1', '94.80'),
# ('VIRUS', '104.30'),
# (u'Radio Zürisee', '90.20'),
# Additional options to pass to mplayer in TV mode.
# eg. To turn off deinterlacing:
# TV_OPTS = '-vop pp=ci'
# TV_OPTS = ''
# TV_SETTINGS = '%s television %s %s' % (CONF.tv, CONF.chanlist, TV_DEVICE)
# Size (in MB) of the timeshift buffer. (ie: how long you can pause tv for.)
# This is set to a low default because the default buffer location is
# under FREEVO_CACHEDIR and we don't want to blow /var or /tmp.
# TIMESHIFT_BUFFER_SIZE = 128
# TIMESHIFT_ENCODE_CMD = 'mp1e -m3 -c%s -p%s -r14,100' % \
# (TV_SETTINGS.split()[3], AUDIO_INPUT_DEVICE)
# TIMESHIFT_BUFFER = '%s/timeshift.mpeg' % FREEVO_CACHEDIR
# TV_DATE_FORMAT = '%e-%b' # Day-Month: 11-Jun
# TV_TIME_FORMAT = '%H:%M' # Hour-Minute 14:05
# TV_DATETIME_FORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am
# This is the filename format for files recorded using Freevo.
# You can use any of the strftime variables in it, provided you
# put two '%%' at the beginning.
# Some examples:
# %%A - Full weekday name.
# %%H - Hour (24-hour clock) as a decimal number [00,23].
# %%M - Minute as a decimal number [00,59].
# %%m - Month as a decimal number [01,12].
# %%d - Day of the month as a decimal number [01,31].
# %%p - Locale's equivalent of either AM or PM.
# More can be found at: http://www.python.org/doc/current/lib/module-time.html
# TV_RECORD_FILE_MASK = '%%m-%%d %%H:%%M %(progname)s - %(title)s'
# If using the persistent recordserver
# TV_RECORD_SCHEDULE = FREEVO_STATICDIR + '/schedule.pickle'
# TV_RECORD_FAVORITES = FREEVO_STATICDIR + '/favorites.pickle'
# TV_RECORD_FAVORITES_LIST = FREEVO_STATICDIR + '/favorites.txt'
# RECORDSERVER_IP = 'localhost'
# RECORDSERVER_PORT = 18001
# RECORDSERVER_SECRET = 'secret1'
# If the recordserver runs as root, set the uid to the given one
# after startup. The gui must also match one of the users group ids
# RECORDSERVER_UID = 0
# RECORDSERVER_UID = 0
# Remove old recordings if GB free is less than specified value
# RECORDSERVER_CLEANUP_THRESHOLD = 0
# start every recording X minutes before scheduled,
# and stop X minutes after scheduled - default to zero minutes.
# This must be a value in seconds although at the moment only has
# the percision of one minute.
# TV_RECORD_PADDING_PRE = 0
# TV_RECORD_PADDING_POST = 0
# Number of minutes before or after the start time of a favorite where
# a program matching the name, day of week etc should still be considered a
# favorite. For example a favorite has a start time of 21.00, but the program
# has been brought forward by the broadcaster by 10 minutes to 20.50, with
# a margin of less than 10 this program will not be recorded as the start time
# is outside the margin. But if the margin is set at 10 minutes or greater this
# program will be considered a favorite and recorded. Probably about 45 minutes
# is the best bet, better a false positive than a false negative.
# TV_RECORD_FAVORITE_MARGIN = 45
# PRE and POST recording commands. Set these to a runnable command if
# you wish to have special mixer settings or video post processing.
# VCR_PRE_REC = None
# VCR_POST_REC = None
# VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE +
# ':audiorate=32000' + # 44100 for better sound
# ':forceaudio:forcechan=1:' + # Forced mono for bug in my driver
# 'buffersize=64') # 64MB capture buffer, change?
# TV capture size for viewing and recording. Max 768x480 for NTSC,
# 768x576 for PAL. Set lower if you have a slow computer!
# For the 'tvtime' TV viewing application, only the horizontal size is used.
# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,
# it still looks OK, and the picture will not be as jerky.
# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)
# for tvtime.
# TV_VIEW_SIZE = (640, 480)
# TV_REC_SIZE = (320, 240) # Default for slower computers
# Input formats for viewing and recording. The format affect viewing
# and recording performance. It is specific to your hardware, so read
# the MPlayer docs and experiment with mplayer to see which one fits
# your computer best.
# TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11
# TV_REC_OUTFMT = 'yuy2'
# XXX Please see the mencoder docs for more info about the settings
# XXX below. Some stuff must be changed (adevice), others probably
# XXX should be ("Change"), or could be in some cases ("change?")
# VCR_CMD = (CONF.mencoder + ' ' +
# 'tv:// ' + # New mplayer requires this.
# '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) +
# ':norm=%s' % CONF.tv +
# ':channel=%(channel)s' + # Filled in by Freevo
# ':chanlist=%s' % CONF.chanlist +
# ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
# ':outfmt=%s' % TV_REC_OUTFMT +
# ':device=%s' % TV_DEVICE +
# VCR_AUDIO + # set above
# ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec
# 'vcodec=mpeg4' + # lavcodec mpeg-4
# ':vbitrate=1200:' + # Change lower/higher, bitrate
# 'keyint=30 ' + # Keyframe every 10 secs, change?
# '-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding, must be enabled in mencoder!
# 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s
# '-ffourcc divx ' + # Force 'divx' ident, better compat.
# '-endpos %(seconds)s ' + # only mencoder uses this so do it here.
# '-o %(filename)s') # Filled in by Freevo
# TV_VIDEO_GROUPS setting to handles multiple arbitrary groups of devices
# for viewing or recording. It is possible to have different Freevo
# channels use different Video Groups.
# See the wiki for more details:
# http://doc.freevo.org/MultiTunerConfig
# http://doc.freevo.org/Analoguemulti
# This example is when you have one IVTV type card installed
# TV_VIDEO_GROUPS = [
# VideoGroup(vdev=TV_DEVICE,
# adev=AUDIO_DEVICE,
# input_type='tuner 1',
# input_num=0,
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# group_type = 'ivtv',
# desc='PVR-350 Video Group'),
# This example is for two normal TV cards to allow you to use one card to
# view a programme and the other card to record at the same time
# TV_VIDEO_GROUPS = [
# # Use this group for watching tv
# VideoGroup(vdev='/dev/video0',
# adev=None,
# input_type='tuner 1',
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# desc='Watching Video Group',
# record_group=1),
# # Use this group for recording tv
# VideoGroup(vdev='/dev/video1',
# adev=None,
# input_type='tuner 1',
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# desc='Recording Video Group',
# record_group=None),
# Settings for ivtv based cards such as the WinTV PVR-250/350.
# TODO: Add descriptions and valid settings for each option.
# bitrate in bps
# stream type
# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),
# 5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)
# TV_IVTV_OPTIONS = {
# 'input' : 4,
# 'resolution' : '720x480',
# 'aspect' : 2,
# 'audio_bitmask' : 233,
# 'bframes' : 3,
# 'bitrate_mode' : 1,
# 'bitrate' : 4000000,
# 'bitrate_peak' : 4000000,
# 'dnr_mode' : 0,
# 'dnr_spatial' : 0,
# 'dnr_temporal' : 0,
# 'dnr_type' : 0,
# 'framerate' : 0,
# 'framespergop' : 15,
# 'gop_closure' : 1,
# 'pulldown' : 0,
# 'stream_type' : 10,
# TV Channels. This list contains a mapping from the displayed channel name
# to the actual channel name as used by the TV watching application.
# The display name must match the names from the XMLTV guide,
# and the TV channel name must be what the tuner expects (usually a number).
# The TV menu is supposed to be supported by the XMLTV application for
# up to date listings, but can be used without it to just display
# the available channels.
# This list also determines the order in which the channels are displayed!
# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)
# if you make changes here and restart!
# Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]
# If this variable is set to None (default), Freevo will try to auto-detect
# the channel list based on the xmltv file. This doesn't work for all
# xmltv grabber, e.g. the German list doesn't contain station lists. In this
# case Freevo will output the possible list for you to add them manually.
# If auto-detection doesn't work or you want to edit the list, run
# freevo tv_grab -query.
# Setting this variable to [] will deactivate the tv guide. If you don't have
# a tv card, you may also want to add plugin.remove('tv') to remove the whole
# tv menu.
# All channels listed here will be displayed on the TV menu, even if they're
# not present in the XMLTV listing.
# Timedependent channels:
# The TV_CHANNELS-list can look like this:
# TV_CHANNELS = [('21', 'SVT1', 'E5'),
# ('22', 'SVT2', 'E3'),
# ('26', 'TV3', 'E10'),
# ('27', 'TV4', 'E6'),
# ('10', 'Kanal 5', 'E7'),
# ('60', 'Fox Kids', 'E8', ('1234567','0600','1659')),
# ('16', 'TV6', 'E8', ('1234567','1700','2359'),
# ('1234567','0000','0300')),
# ('14', 'MTV Europe', 'E11') ]
# As you can see the list takes optional tuples:
# ( 'DAYS', 'START','END')
# 1234567 in days means all days.
# 12345 would mean monday to friday.
# It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00.
# 03:00 to 06:00 it won't be displayed at all.
# TV_CHANNELS = None
# A lambda function to sort the TV_CHANNELS
#TV_CHANNELS_COMPARE = lambda a, b: cmp(int(a[2]), int(b[2]))
# TV_FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.
# This is only the case if you are using V4L2 and any of the following plugins:
# timeshift, ivtv_record, ivtv_basic_tv.
# For the standard frequancy tables see src/tv/freq.py. To add your own just
# replace tuner_id in the following example with a valid tuner id (ie: '5' or
# 'BBC1') and a frequency in KHz. You may have as many entries as you like,
# anything here will simply override a corresponding entry in your standard
# frequency table and you can also have entries here that are not present in
# there.
# TV_FREQUENCY_TABLE = {
# 'tuner_id' : 55250,
# Program to grab xmltv listings. To get a grabber, you need to download
# xmltv. A possible value for users in the USA is tv_grab_na
# Use the tv_grab helper to grab the listings and cache them. Start
# 'freevo tv_grab --help' for more informations.
# XMLTV_GRABBER = ''
# If you want to run tv_sort on your listings add the path to tv_sort here.
# tv_sort will make sure all your programs have proper stop times, otherwise
# programs might get cut off at midnight.
# XMLTV_SORT = ''
# Number of days the grabber should get
# XMLTV_DAYS = 3
## ONLY ADJUST THIS IF YOUR GUIDE TIMES ARE INCORRECT ##
# GMT offset for XMLTV feeds that don't contain timezone information
# An example of this is the OzTivo feed which has the timestamps
# in the XML pre-adjusted for your timezone
# XMLTV_TIMEZONE='+0100'
# ======================================================================
# Freevo builtin commdetect server settings:
# ======================================================================
# COMMDETECTSERVER_UID = 0
# COMMDETECTSERVER_GID = 0
# COMMDETECTSERVER_IP = 'localhost'
# COMMDETECTSERVER_PORT = 6667
# ======================================================================
# Freevo builtin rss server settings:
# ======================================================================
# RSSSERVER_UID = 0
# RSSSERVER_GID = 0
# RSS_CHECK_INTERVAL = 3600
# RSS_FEEDS = '/etc/freevo/rss.feeds'
# RSS_VIDEO = '/media/video'
# RSS_AUDIO = '/media/podcasts'
# ======================================================================
# Freevo builtin WWW server settings:
# ======================================================================
# To activate the built in web server, uncomment the following line
# plugin.activate('www')
# Web server port number. 80 is the standard port, but is often
# taken already by apache, and cannot be used unless the server
# runs as root. Port 8080 is the default, change to 80 if
# needed.
# WEBSERVER_PORT = 8080
# Username / Password combinations to login to the web interface.
# WWW_USERS = {
# "user1" : "changeme",
# "optional" : "changeme2"
# Divide the TV guide into intervals of this length (in minutes)
# WWW_GUIDE_INTERVAL = 30
# Precision for TV guide (in minutes)
# WWW_GUIDE_PRECISION = 5 #
# Show this many blocks at once
# WWW_GUIDE_COLS = 6
# WWW_STYLESHEET = 'styles/main.css'
# WWW_JAVASCRIPT = 'scripts/display_prog-head.js'
# Integrate personal web pages into the web server
# WWW_PERSONAL_PAGE = [
# ('My Page', 'a single personal web page', 'page.html'),
# ('My Site', 'site description', 'site/'),
# ======================================================================
# Internal stuff, you shouldn't change anything here unless you know
# what you are doing
# ======================================================================
# Config for xml support in the movie browser
# the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers
# VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]"
# Remote control daemon. The server is in the Freevo main application,
# and the client is a standalone application in rc_client/
# ENABLE_NETWORK_REMOTE = 0
# REMOTE_CONTROL_HOST = '127.0.0.1'
# REMOTE_CONTROL_PORT = 16310
# Remote control daemon. Similar to the one above, but uses TCP instead
# of UDP. It is possible to send commands with a telnet client.
# ENABLE_TCP_NETWORK_REMOTE = 0
# REMOTE_CONTROL_TCP_HOST = '127.0.0.1'
# REMOTE_CONTROL_TCP_PORT = 16311
# XMLTV File
# This is the XMLTV file that can be optionally used for TV listings
# XMLTV_FILE = '/tmp/TV.xml'
# XML TV Logo Location
# Use the "makelogos.py" script to download all the
# Station logos into a directory. And then put the path
# to those logos here
# TV_LOGOS = OS_CACHEDIR + '/xmltv/logos'
# ======================================================================
# Idlebar and plugins
# These are the default idlebar settings, there are many more see:
# freevo plugins -l for a complete list
# To turn off use plugin.remove('idlebar.cdstatus')
# clock display
# %A - Full weekday name.
# %a - Abbreviated weekday name.
# %B - Full month name
# %b - Abbreviated month name
# %I - Hour (12-hour clock) as a decimal number [01,12].
# %H - Hour (24-hour clock) as a decimal number [00,23].
# %M - Minute as a decimal number [00,59].
# %m - Month as a decimal number [01,12].
# %b - Name of Month
# %d - Day of the month as a decimal number [01,31].
# %p - Locale's equivalent of either AM or PM.
# %y - Year without century as a decimal number [00,99].
# %Y - Year with century as a decimal number.
# ======================================================================
# plugin.activate('idlebar')
# plugin.activate('idlebar.tv', level=20)
# plugin.activate('idlebar.cdstatus', level=25)
# plugin.activate('idlebar.diskfree', level=30)
# plugin.activate('idlebar.clock', level=50)
# CLOCK_FORMAT = '%a %d %H:%M'
# Debugging and logging settings
# logging can be one of:
# CRITICAL, ERROR, WARNING, INFO, DEBUG or NOTSET
# debugging is a number from 0 to 9, 0 is no debugging 9 is most
# LOGGING = logging.DEBUG
# LOGGING_RECORDSERVER = logging.DEBUG
# DEBUG = 1
# messages go to stdout
# DEBUG_STDOUT = 0
# messages from starting a child application
# DEBUG_CHILDAPP = 1
# timing messages
# DEBUG_TIME = 0
I've been reading wikis and googling now the entire weekend so I hope someone here can help me.Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf. -
Problems concerning "How to integrate MS Exchange Server into SAP EP"
Hi,
I want to realize the scenario in "How to integrate Microsoft Exchange Server into SAP Enterprise Portal" from the Microsoft-Website.
We´re using SAP NetWeaver 04, SAP NetWeaver Portal 6.0.14.0.0 and KMC 6.0.14.2.0 and Microsoft Exchange Server 2000 SP3.
I have created (as described in the document) the HTTP-System and a WebDAV RM. But the repository doesn´t appeaer in the KM-Content-iView.
I checked the Component Monitor and got this error-message for "servers" (it was marked with a red square)
last-error-3 2006-05-16T13:12:11Z: PROPFIND /public: 401 Access Denied
last-error-4 2006-05-16T13:15:04Z: PROPFIND /public: 401 Access Denied
last-error-6 2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
errors 8
last-error-2 2006-05-16T13:12:10Z: PROPFIND /public: 401 Access Denied
requests 8
last-error-7 2006-05-16T13:26:35Z: PROPFIND /public: 401 Access Denied
bytes-per-second 0
successes 0
response-average 194
last-error-1 2006-05-16T13:11:55Z: PROPFIND /public: 401 Access Denied
last-error-0 2006-05-16T13:11:54Z: PROPFIND /public: 401 Access Denied
last-error-5 2006-05-16T13:15:05Z: PROPFIND /public: 401 Access Denied
failures 0
Any idea, what´s wrong? And how to solve the problem.
Thanks for help,
Sven
Message was edited by: Sven KellerHi James,
How can I check the KM ACLs/Security Zones?
I had a look on "System Administration - System Configuration - Knowledge Management - Content Management - Repository Managers - Security Manager - WebDAV ACL Security Manager".
There was just "WDAclSecurityManager" and the Permission Rendering Class was "com.sapportals.wcm.control.acl.ResourcePermissionControl".
Or where do I have to look for the ACL? -
Transport Monitor problem concerning Treo 680 and MacBook
When uninstalling Palm software from a MacBook, some people have found it impossible to reinstall Palm software successfully again. They also have a problem synching and a message that flashes up about a "Transport Monitor." May I ask someone who has successfully resolved this problem to post detailed instructions before I am forced to check myself into a psychiatric ward? Thank you.
james_palm680
Post relates to: Treo 680 (Unlocked GSM)Hello James.
Check out the accepted solution on this page. I have had some success with those directions. If that doesn't work, you may want to see if the Bluetooth modem option is enabled as described in this post.
Hope one or both of those two links work for you.
Alan G -
Problem concerning Nokia 6111 - Contacts
Hello there!
Let me first explain my situation: I have a Nokia 6111 and a couple of days ago I had a small accident with it. My phone took a swim in the swimming pool…
Now, after some hours of drying, I decided to give it a shot. Miraculously, my phone worked. I can scroll through the menus, receive calls, etc. Only one problem remains: my screen is totally broken. I can’t see anything except for the blur caused by the water.
The big problem now is: There are still contacts in my phone, which are not yet on my SIM card. So I was thinking: I copy all my numbers from my phone’s memory onto my SIM card and I buy a new phone.
Problem is that I can see only – let’s give it a percentage: 10% of my screen -. The rest is one big stain caused by the water. So therefore my question: Does anyone here on the board have a transcript of the NOKIA 6111 menus? Or does anyone have the same phone? That way I can copy my numbers onto my SIM card by just clicking without seeing the menus.
I know this can be rather confusing so I give an example. I’m looking for something like this:
Menu => Contacts => Names
=> Settings
=> Groups
=> Copy Contacts => From Phone to SIM
=> From SIM to Phone
=> Delete Contacts
=> Settings
=> Messages
That way, I can try to copy my contacts without seeing the screen. If somebody would be so nice to make a little transcript of the Nokia 6111 menu (or give a link to it, because I can’t seem to find it), it would be a great help.
Thanks in advance!
Leitz.Sorry for my bad english
I have a problem with copying contacts. I connected 6300 with my PC Suite 7.1 via USB. Then I went to Comunication Center. It wrote: reading contacts... Then telephone wrote: Data transmission is impossible.
Results:
Cont.: Is not finished
It is impossible to process all objects
transferred: 0
accepted: 0
Contacts, updated in other device:
new:0
Deleted:0
Refreshed:0
Contacts, updated in other telephone:
New:0
deleted:0
refreshed:0
It`s interesting that everything works with Nokia N73 Music Edition and Nokia 6131 -
Some Smaller Problems concerning HTTP-Server and iSQL*PLUS
Hi!
System: WIN2K, ORA 9.0.0.1
1. Problem: With HTTP-Server launched by ORACLE at System Start
can not connect to DB via iSQL*Plus, message: ORA-12638 (german
message:"Abruf des Berechtigungsnachweis misslungen") Credential
retrieval failed. Does no longer occur when shutting down
service and relaunching Apache manually. Why?
2. HTTP Server dies instantly when accidentially sending /*
somewhere in SQL-Statement or alone via iSQL*Plus (in SQL*Plus
Window /* starts DOC-Mode without chance to end DOC-mode with #)
Can anyone help? Thank you!
TIP: Manipulating Database via iSQL*Plus on a Eudora-Browser
with IR Cellular impresses every Boss! :-)Hello CJ
1st of all: Thank you for your answer!
What privilege iSQL*Plus connection are you trying make?Tried as normal user and as sysdba. Both works well with Apache
in Console, both doesn4t work with Apache as a Service started
(even if there is a 2nd Apache started in Console window)
Can you connect as a normal user
if you specify a full DB connection string? By full connection
string I mean the "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS...)))"
etc. syntax commonly seen in tnsnames.ora. No! Error "SP2-0306 Invalid Option" occurs.
that the problem also occurs in the old GUI (non-web version)
version of SQL*Plus?Right! Typing DOC means entering (now unsupported) DOC Mode
(DOC> Prompt) return to SQL> with #. Typing /* gets you into DOC-
Mode but you can4t leave with #. (SQL*Plus userguide and
reference Part F Obsolete Commands)
In iSQL*Plus (web based version) typing /* caused apache to die
(on console!! as service as I mentioned: no connection ).
Somehow problem no longer occurs. (Miracle?)
3. Your Palm efforts sound neat! Can you share with the forum
how usable it is? Are there any configuration tricks
you found?No tricks needed, I just started a connection to a local
Provider via IR and Nokia Cellular. Connected to DB via
iSQL*Plus using Eudora-Browser, logged in as sysdba and shutdown
DB and started it again. Looked at some v$-views, killed a
session or two had a good time and impressed everyone. Decide
for yourself if this could be useful. Might be helpful for
remote troubleshooting during holidays so don4t tell your boss
about it.
(Did anyone try this on Windows CE? Like to know!)
Dominic -
Hi all,
we use the CPH to check the availability of logon groups. The logon group LOGONCHECK is available on all SAP systems and on all application servers. The job SAP_CCMS_CPH_MINCOLL runs every 13 minutes. The job SAP_CCMS_CPH_REPORT runs every day. We got the values for ervery hour for every day. But since one week, we get only the value for the last hour.
Where is here the problem?Hi all,
here the solution:
run function module SCSM_RUN_RFC_LOGON_CHECK in a batch job, every five minutes see SAP note 929577
regards
Konrad -
Problem concerning parsing int from .dat input
The following program takes information form a ".dat" file, stores it and manipulates it. However, I am having a weird problem. Whenever I try to parse a n int from a certain point in the file (the end of a line) I keep getting thrown a java.lang.NumberFormatException. I understand why this would be thrown if I was sending it a wrong number, but, I am not. In fact the token before the last one sends it the same number and it parses fine. Here is the problem code;
public void getPrice(Scanner scanner)
while(scanner.hasNextLine())
//puts into string the next scan token
String s = scanner.next();
//takes the scan toke above and puts it into an editable enviroment
stringToken = new StringTokenizer(s, " ", false);
while(stringToken.hasMoreTokens())
//moves position within string in file by one
position++;
/*Starts data orignazation by reading from each perspective field
* 1 = day
* 2 = day of month
* 3 = month
* 4 = year
if(position == 1)
String dayFromFile = stringToken.nextToken();
int dayNum = Integer.parseInt(dayFromFile);
System.out.print(days[dayNum-1] +" ");
else if(position == 2)
System.out.print(stringToken.nextToken() + "/");
else if(position == 3)
System.out.print(stringToken.nextToken() + "/");
else if(position == 4)
System.out.print(stringToken.nextToken() +"\n");
//if it is in [buy] area, it prints
else if(position == 8)
String buy = stringToken.nextToken();
System.out.println("Buy: " +buy );
currentBuyPrice = Integer.parseInt(buy);
if(currentBuyPrice < 0)
currentBuyPrice = 0;
if(currentBuyPrice > buyPrice)
buyPrice += currentBuyPrice;
if(currentBuyPrice == buyPrice)
buyPrice +=0;
else
buyPrice -= currentBuyPrice;
//if it is in [sell] area, it prints, and resets the position to zero because line is over
else if(position == 9)
String sell = stringToken.nextToken();
System.out.println("Sell: " +sell);
**currentSellPrice = Integer.valueOf(sell).intValue();;
if(currentSellPrice < 0)
currentSellPrice = 0;
else if(currentSellPrice > sellPrice)
sellPrice += currentSellPrice;
else if(currentSellPrice == sellPrice)
sellPrice +=0;
else
sellPrice -= currentSellPrice;
scanner.nextLine();
position = 0;
if(scanner.hasNextLine() == false)
System.out.println("Net change of buy price: " buyPrice "\n Net change of sell price: " +sellPrice);
//discards all other string areas
else
stringToken.nextToken();
**The problem is here. The string prints as a perfect number, no spaces or anything. I thought it could be because the number was "-1" but I tried it without the "-" and it still threw the same thing. The really weird thing is that the buy code works fine, and it parses all ints I send it fine.
EDIT:
Here is how the .dat looks;
1 5 15 2006 18 26 12 -1 -1
1 5 15 2006 18 32 20 -1 -1
1 5 15 2006 18 38 29 -1 -1
It is the last "-1" that can not be parsed. I tried putting an excape character at the end so it looked;
1 5 15 2006 18 26 12 -1 -1 &
1 5 15 2006 18 32 20 -1 -1 &
1 5 15 2006 18 38 29 -1 -1 &
That did nothing.import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.util.*;
import java.awt.event.*;
public class CSE extends JFrame implements ActionListener
//GUI COMPONENTS
JTextField input = new JTextField(20);
JButton submit = new JButton("submit");
//COMPONENTS FOR DATE; OBTAINING CORRECT FOLDER
String days[] = {"Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"};
Calendar calSource = Calendar.getInstance();
int day = calSource.get(Calendar.DAY_OF_MONTH);
int month = calSource.get(Calendar.MONTH);
int year = calSource.get(Calendar.YEAR);
int monthCheck [] = {Calendar.JANUARY, Calendar.FEBRUARY, Calendar.MARCH, Calendar.APRIL, Calendar.MAY, Calendar.JUNE, Calendar.JULY, Calendar.AUGUST, Calendar.SEPTEMBER, Calendar.OCTOBER, Calendar.NOVEMBER, Calendar.DECEMBER};
int dayS;
int monthS;
int yearS;
//if there is file found
boolean proceed = false;
//int data for analysis
int buyPrice;
int currentBuyPrice;
int sellPrice;
int currentSellPrice;
//toold for parsing and decoding input
String inputS = null;
String s = null;
StringTokenizer stringToken = null;
Scanner scanner;
int position = 0;
public CSE()
super("Test CSE");
setDefaultCloseOperation(EXIT_ON_CLOSE);
input.setBackground(new Color(0, 80, 250));
submit.addActionListener(this);
getContentPane().add(input, BorderLayout.SOUTH);
getContentPane().add(submit, BorderLayout.NORTH);
setSize(500, 500);
setVisible(true);
public void actionPerformed(ActionEvent e)
getMonth();
inputS = input.getText();
FileReader newRead = null;
try {
newRead = new FileReader(monthS +"-" +day +"-" +year +"/" +inputS +".dat");
proceed = true;
catch(FileNotFoundException f)
System.out.println("File not found");
proceed = false;
if(proceed)
BufferedReader bufferedReader = new BufferedReader(newRead);
scanner = new Scanner(bufferedReader);
scanner.useDelimiter("\n");
getPrice(scanner);
public void getPrice(Scanner scanner)
while(scanner.hasNextLine())
//puts into string the next scan token
String s = scanner.next();
//takes the scan toke above and puts it into an editable enviroment
stringToken = new StringTokenizer(s, " ", false);
while(stringToken.hasMoreTokens())
//moves position within string in file by one
position++;
/*Starts data orignazation by reading from each perspective field
* 1 = day
* 2 = day of month
* 3 = month
* 4 = year
if(position == 1)
String dayFromFile = stringToken.nextToken();
int dayNum = Integer.parseInt(dayFromFile);
System.out.print(days[dayNum-1] +" ");
else if(position == 2)
System.out.print(stringToken.nextToken() + "/");
else if(position == 3)
System.out.print(stringToken.nextToken() + "/");
else if(position == 4)
System.out.print(stringToken.nextToken() +"\n");
//if it is in [buy] area, it prints
else if(position == 8)
String buy = stringToken.nextToken();
System.out.println("Buy: " +buy );
currentBuyPrice = Integer.parseInt(buy);
if(currentBuyPrice < 0)
currentBuyPrice = 0;
if(currentBuyPrice > buyPrice)
buyPrice += currentBuyPrice;
if(currentBuyPrice == buyPrice)
buyPrice +=0;
else
buyPrice -= currentBuyPrice;
//if it is in [sell] area, it prints, and resets the position to zero because line is over
else if(position == 9)
String sell = stringToken.nextToken();
System.out.println("Sell: " + sell);
currentSellPrice = Integer.valueOf(sell).intValue();;
if(currentSellPrice < 0)
currentSellPrice = 0;
else if(currentSellPrice > sellPrice)
sellPrice += currentSellPrice;
else if(currentSellPrice == sellPrice)
sellPrice +=0;
else
sellPrice -= currentSellPrice;
scanner.nextLine();
position = 0;
if(scanner.hasNextLine() == false)
System.out.println("Net change of buy price: " +buyPrice +"\n Net change of sell price: " +sellPrice);
//discards all other string areas
else
stringToken.nextToken();
public void getMonth()
for(int x=0; x < monthCheck.length; x++)
if(month == monthCheck[x])
monthS = (x+1);
x = monthCheck.length;
public static void main(String [] args)
CSE cs = new CSE();
}Make a folder named whatever the current date is, and put a .dat file in there with this;
1 5 15 2006 0 3 52 -1 -1
1 5 15 2006 0 29 52 -1 -1
1 5 15 2006 0 36 1 -1 -1
1 5 15 2006 0 42 9 -1 -1
1 5 15 2006 0 48 18 -1 -1
1 5 15 2006 0 54 29 -1 -1
1 5 15 2006 1 0 37 -1 -1
1 5 15 2006 1 6 44 -1 -1
1 5 15 2006 1 12 53 -1 -1
1 5 15 2006 1 19 1 -1 -1
1 5 15 2006 1 25 9 -1 -1
1 5 15 2006 1 31 18 -1 -1
1 5 15 2006 1 37 27 -1 -1
1 5 15 2006 1 43 37 -1 -1
1 5 15 2006 1 49 46 -1 -1
1 5 15 2006 1 55 53 -1 -1
1 5 15 2006 2 2 1 -1 -1
1 5 15 2006 2 8 10 -1 -1
1 5 15 2006 2 14 27 -1 -1
1 5 15 2006 2 20 37 -1 -1
1 5 15 2006 14 12 45 -1 -1
1 5 15 2006 14 20 36 -1 -1
1 5 15 2006 14 26 44 -1 -1
1 5 15 2006 14 32 52 -1 -1
1 5 15 2006 14 39 0 -1 -1
1 5 15 2006 14 45 8 -1 -1
1 5 15 2006 14 51 17 -1 -1
1 5 15 2006 14 57 26 -1 -1
1 5 15 2006 15 3 35 -1 -1
1 5 15 2006 15 9 43 -1 -1
1 5 15 2006 15 15 51 -1 -1
1 5 15 2006 15 21 59 -1 -1
1 5 15 2006 15 28 6 -1 -1
1 5 15 2006 15 34 15 -1 -1
1 5 15 2006 15 40 24 -1 -1
1 5 15 2006 15 46 33 -1 -1
1 5 15 2006 15 52 40 -1 -1
1 5 15 2006 15 58 48 -1 -1
1 5 15 2006 16 4 56 -1 -1
1 5 15 2006 16 11 5 -1 -1
1 5 15 2006 16 17 14 -1 -1
1 5 15 2006 16 23 24 -1 -1
1 5 15 2006 16 29 32 -1 -1
1 5 15 2006 16 35 39 -1 -1
1 5 15 2006 16 41 47 -1 -1
1 5 15 2006 16 47 55 -1 -1
1 5 15 2006 16 54 4 -1 -1
1 5 15 2006 17 0 13 -1 -1
1 5 15 2006 17 6 23 -1 -1
1 5 15 2006 17 12 31 -1 -1
1 5 15 2006 17 18 39 -1 -1
1 5 15 2006 17 24 46 -1 -1
1 5 15 2006 17 30 55 -1 -1
1 5 15 2006 17 37 3 -1 -1
1 5 15 2006 17 43 12 -1 -1
1 5 15 2006 17 49 20 -1 -1
1 5 15 2006 17 55 29 -1 -1
1 5 15 2006 18 1 36 -1 -1
1 5 15 2006 18 7 44 -1 -1
1 5 15 2006 18 13 53 -1 -1
1 5 15 2006 18 20 2 -1 -1
1 5 15 2006 18 26 12 -1 -1
1 5 15 2006 18 32 20 -1 -1
1 5 15 2006 18 38 29 -1 -1
1 5 15 2006 18 44 36 -1 -1
1 5 15 2006 18 50 45 -1 -1
1 5 15 2006 18 56 54 -1 -1
1 5 15 2006 19 3 3 -1 -1
1 5 15 2006 19 9 10 -1 -1
1 5 15 2006 19 15 18 -1 -1
1 5 15 2006 19 21 26 -1 -1
1 5 15 2006 19 27 34 -1 -1
1 5 15 2006 19 33 44 -1 -1
1 5 15 2006 19 39 53 -1 -1
1 5 15 2006 19 46 3 -1 -1
1 5 15 2006 19 52 12 -1 -1
1 5 15 2006 19 58 20 -1 -1
1 5 15 2006 20 4 30 -1 -1
1 5 15 2006 20 10 38 -1 -1
1 5 15 2006 20 16 50 -1 -1
1 5 15 2006 20 23 0 -1 -1
1 5 15 2006 20 29 9 -1 -1
1 5 15 2006 20 35 17 -1 -1
1 5 15 2006 20 41 24 -1 -1
1 5 15 2006 20 47 32 -1 -1
1 5 15 2006 20 53 40 -1 -1
1 5 15 2006 20 59 49 -1 -1
1 5 15 2006 21 5 59 -1 -1
1 5 15 2006 21 12 8 -1 -1
1 5 15 2006 21 18 16 -1 -1
1 5 15 2006 21 24 23 -1 -1
1 5 15 2006 21 30 31 -1 -1
1 5 15 2006 21 36 40 -1 -1
1 5 15 2006 21 42 49 -1 -1
1 5 15 2006 21 48 57 -1 -1
1 5 15 2006 21 55 5 -1 -1
1 5 15 2006 22 1 12 -1 -1
1 5 15 2006 22 7 20 -1 -1
1 5 15 2006 22 13 28 -1 -1
1 5 15 2006 22 19 38 -1 -1
1 5 15 2006 22 25 48 -1 -1
Maybe you are looking for
-
How to Get Choices as a Dropdown from a different Column for the same Item In a Document Library?
Hello All, I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library. To be specific. I have Created a Project Document Set, Which has a Column called "Project Members" w
-
How can I set up a separate account on my Ipod for my friend to use on a separate computer
I want to lend my IPod touch to my friend who will be hiking for 2 weeks in Spain. Obviously, she wants to download her own play list. How can she do this, without me removing all my personal settings?
-
In Android version i can choose what i want Grid View, Cover View or Both. Will it be available for iPad version? Also where's hotfix for UDID?
-
I've just installed J2SE 1.4.0 and am having problems with the classpath. I've tried setting it as explained in the Help section on the java.sun site, however I still get the error message: 'javac' is not recognised as an internal or external command
-
Newbie: Importing imovie to idvd
Hello Everyone, I am a new mac user and therefore, a new imovie user. i have created a photo slideshow in imovie(it is about 25 minutes long with many transitions and cued music) and ultimately want to burn it to a dvd. earlier this year i created a