Problems conecting my HH router with a Netgear rou...

Is this possible as i have read many post saying it can be done and explaning how.
Most say to change the IP on the netgear and turn its DHCP off this dose not work
as i have tryed many many different configerations of this..
I have a New BT Home Hub and a Netgear DG834G v3 and they are conected by a ethernet cable Lan port to Lan port,
The Netgear Router dosent recognise the Home Home at all..
Please help if u know the corect setings..
Best Wishes Tristan

NO, I HAVEN'T TRIED OTHER CABLES... BUT I'VE BEEN READING THAT IS GOOD TO USE THIS CONECTOR: Kanex iAdapt 51 Mini DisplayPort to HDMI with 5.1 Channel Digital Audio, BECAUSE WITH THE OTHER ONE YOU CAN'T GET THE AUDIO.
THE PROBLEM IS THAT I BOUGHT THAT DYNEX BY AMAZON AND I'M NOT SURE THAT THEY GIVE ME MY MONEY BACK.
ANYWAY...THANK YOU FOR YOUR HELP

Similar Messages

I HAVE PROBLEMS CONECTING MY MB PRO WITH MY INSIGNIA TV

HI EVERYONE.
I HAVE A MACBOOK PRO THAT JUST BOUTH AND I WANT TO CONECT IT WITH MY INSIGNIA 24 INCHES TV THAT I HAVE.
I ALREADY HAVE THE "Dynex DX-AP160 - Video / audio adapter - DisplayPort / HDMI - mini-DisplayPort (M) - 19 pin HDMI" TO CONECT THEM.
THE PROBLEM IS, WHEN I CONECT THE HDMI CABLE WITH THE LAPTOP.....IT DOESN'T WORK.
THE TV SCREEN SAYS "NO SIGNAL" AND THE LAPTOP SCREEN ONLY GETS BLUE LIKE 2 SECONDS JUST WHEN I CONECT THE CABLE IN IT.
PLEASE, IF SOMEBODY COULD HELP ME, I'LL BE VERY GRATEFUL.

NO, I HAVEN'T TRIED OTHER CABLES... BUT I'VE BEEN READING THAT IS GOOD TO USE THIS CONECTOR: Kanex iAdapt 51 Mini DisplayPort to HDMI with 5.1 Channel Digital Audio, BECAUSE WITH THE OTHER ONE YOU CAN'T GET THE AUDIO.
THE PROBLEM IS THAT I BOUGHT THAT DYNEX BY AMAZON AND I'M NOT SURE THAT THEY GIVE ME MY MONEY BACK.
ANYWAY...THANK YOU FOR YOUR HELP

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.

My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

How do I use a netgear N600 router with Infinity 1

I have searched various forums etc. with mixed success so am hoping that someone here can give me an idiot's guide to connecting to the internet using my netgear N600 router rather than using the BT Homehub 5. BT say that I can do it (despite my router being set up for ADSL and the HH5 being set up for VDSL) but that they can't tell me how! They sent me an email with various details I would need but I can't see where most of them need to be added when I connect to the netgear set up wizard. What I could see I filled in but when I tried to connect the netgear genie told me the ADSL cable wasn't connected. Can anyone give me a step by step guide of what to do please? I would be very grateful. Thanks

nicolawatt wrote:
I just have the homehub 5 - I have seen various complicated descriptions elsewhere explaining how to use the HH5 as just a modem or how to just connect directly with the Netgear but all have been a bit over my head!
The HH5 cannot be used as a stand alone modem. You could use the Netgear as a simple wireless access point, but you would lose most of the functions, and would be better off using a proper wireless access point.
You cannot use the Netgear as a router, without a modem.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

My Mac suddenly started getting a pop up message saying "There was a problem conecting to the server. URLs with the type "file" are not supported." My internet is working fine,no problem connecting. I just keep getting this message which I click off .

My Mac suddenly started getting a pop up message saying "There was a problem conecting to the server. URLs with the type "file" are not supported." My internet is working fine,no problem connecting. I just keep getting this message which I click off and continue working.

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Problem in configuring IPv6 interface with default Router lifetime.

I'm facing Problem in configuring IPv6 interface with default
Router lifetime through a router advertisement.
I'm also see an unusual behavior that even after configuring accept_rtadv=0,
the ipv6 address is configured.
Please help in out .

Mac OS 9 does not support IPv6. While you can have IPv6 on your network, a Macintosh running Mac OS 9.2.2 or earlier cannot make connections to services using this network protocol.
To use IPv6 on a Macintosh, you need Mac OS X 10.1 or later (as far as I know).
—tonza

Need help replacing a Netgear router with my old used wrt54g from another house.

I had a WRT54G at my old house that was working great. Now the renters moved out and I got the router back. I have been having some issues with the netgear router Im using now so I would like to replace it with the Linksys. How do I do this? Do I need to hit the reset button? What do I set the settings at and how do I set up security so others can't access my network.

Whoaw! Take it easy Ragnar....
It is easy to setup the router with your existing network. I'd like to know your ISP. In a way, you can have the router set up manually according to your ISP settings, whether it is cable or DSL.
For setting up the wireless to be secured, you can check this link.
for heads up! <<<call_me_jam_>>>

Anyone got an HP 1022nw printer working with a Netgear DGN2000 router?

I recently changed my router In readiness for the arrival of my new MBP.
Now I can't print wirelessly on my HP printer (1022nw) from any machines on the network, irrespective of whether security (eg. WAP) is set up, or it's left open and unprotected.
I think I've worked through most things - initially on the Tiger forum, when using my old iBook G4 - but without success. Full details here: Link: [http://discussions.apple.com/thread.jspa?threadID=2054454&tstart=0]
But now I'm on the new MBP full-time, I wondered if anyone here has had any experience of the same combination > Netgear DGN2000 + HP 1022nw. It can't be that unusual a pairing.
None of my machines (including 2 iBooks with Tiger + 2 Macbooks with Leopard) can print wirelessly - but all of them did on the previous router - the old Netgear DG834G.
Feedback of any sort would be much appreciated - if you have any positive ideas/solutions, even better!

Have you posted in the Printing, faxing and scanning forum here?

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhone NO

My wife and i have an iPhone 5 6.1.2 firmware.. We both are having horrible wifi signals. We have done everything we can.. What update will fix this? I get full bars on my iPad 2 through my whole house.. Be standing right beside the router with iPhones and it cuts in and out.. Drops from 3 wifi bars to 1

I am having the same problem with brand new Ipad Mini at my house.
It connects to the WiFi fine - but will not pull an IP address in DHCP mode, or if I set all the IP info statically - it still will not get any network access.
This doesn't look like a WiFi issue, as it does connect and is seen by the WiFi Access Point. All the normal WiFi fix stuff doesn't help.
- Using a Dlink DAP-2553 which is less than 2 months old.
Other devices connect fine, including Ipad 2.
This same Mini worked fine at another house and also connected to a mobile hotspot fine....so seems to be some weird IP issue with maybe this Access Point or maybe the older Router that I have (older Netgear)?
I am actually a network engineer and still have not been able to find a solution. Both the Ipad Mini and the Dlink WAP have the latest firmware loaded.
Wondering if anyone has found a solution to this problem.

Linksys BEFW11S4 v2 with a NETGEAR RP614 v3

I have a Linksys BEFW11S4 v2 with a NETGEAR RP614 v3.
My setup is my Cable modem, into my NETGEAR RP614 v3, and everything works perfectly fine. I got a Linksys BEFW11S4 v2 and updated its firmware from the linksys server.
Now,
I'm hooking the Linksys into the NETGEAR router (ethernet) and using the Linksys wireless to connect my laptop to the entire network.
(My PC desktop is running XP Home and my Laptop is running Windows Vista Home Premium)
My laptop can go online perfectly fine wirelessly, and the signal and everything seems perfectly fine. My problem is however, my Laptop can't see the computers on the NETGEAR router. (The Linksys acquires the correct IP and Domain and everything from the NETGEAR however).
I've set the network discovery and all in Windows Vista to on, however it can't see the computers still. I've even disabled the Firewalls at one point on the desktops.
However, Itunes finds the SHARED music files and stuff from the NETGEAR computers. And when I ran Diablo2, with TCP/IP I could connect to a game hosted by a NETGEAR computer, yet when I hosted, they couldn't connect to me behind the Linksys.
Anyone think they can help ?
Thank you for your time,
Charles Louis

That's because they belong to different networks: I think it goes this way...
Netgear usually operates under the network IP of 192.168.0.x while Linksys operates under network IP of 192.168.1.x ......... now if you want to do file and printer sharing on all your PC's... have them belong to the same network by doing the ff:
► change IP of the BEFW11S4 to 192.168.0.x (preferrably 50)
► disable the Linksys DHCP server
► connect the Netgear to port 1 of the Linksys router
This would make in effect your BEFW11S4 just like a wireless switch.

Wireless Problems. 2 PC's connected via Netgear, would like to connect G5

Thanks for your time in looking at this message.
I have currently set-up three PC's via a Wireless Netgear Router. (DG834G). Two of these computers are wired to the Router, and the other runs wirelessly. The Netgear network name is 'Errington'.
I also have a Apple G5, running OS X 10.3.3. I have purchased an Apple Extreme Card aswell as an Airport Base Station and installed correctly. I would like to connect this computer to my Netgear network in order to share the internet connection as well as printers.
Although I can use Apple's, I'm a PC person so have difficulty in setting up hardware. The following, I'm not to sure if it is correct...
I have created a new network for the Apple base station, under the name of Natasha. I have a signal bar - however no connection. My main problem is that I cannot locate the Netgear Network, 'Errington' and as a result I have not internet on this machine.
Again, if anyone has any suggest these would be greatly appreciated.
With kind regards
Anthony
G5 Mac OS X (10.3.3)
G5 Mac OS X (10.3.3)
G5 Mac OS X (10.3.3)

If you are running an open network, with no MAC address access control, no WEP or WPA security then authentication shouldn't be an issue.
It does sound more like a security issue than anything else.
You could try resetting the wireless settings and re-configuring from scratch with a new network name.
The other option is to connect the Airport Extreme to the Netgear and ensure the AEBS is configured to NOT distribute IP addresses.
iFelix

At wits end trying to set up router with this laptop!

I am very frustrated trying to setup any router with this laptop.
I am also trying to run a wired G3 beige (OS 9.1) ethernet connection.
I have tried both a Airport Extreme and a Netgear WGR614. Both of these routers have worked in the past, but not now!
Once in a while I can achieve connectivity through the router, but nothing consistent.
The internet connection works just fine when the router is removed from the network.
I am well aware that the problem maybe some very simple setting or sequence of operations in configuring the network - but I am very much out of ideas, inspiration, and patience.
1.Does anybody have any ideas?
2.Does anybody know of a complete idiots' guide to setting up these routers? (Netgear is NO help)
3.Is there anything inherently wrong about trying to run a wired G3 with OS 9 and a wireless G4 with OS 10.4 from the same router?

I would take a close look at possible radio interference, from nearby routers, cordless telephones, microwave ovens, and so on. If 2 routers worked before and now do not, this says something. Have a friend with a wireless laptop try your signal.
Generally, routers can be default configured and work, although they'll be totally unsecure, which is dangerous. There should be no issues with having an OS9 and OSX computers using the router. Sorry, router settings take a while to learn and are a little different for each brand. Intermittent operation isn't typical of any setting that I know of, WITH THE EXCEPTION that selecting other radio channels sometimes helps.
As the Rabbit mentions, your computer could have a flaw, so you have to test this by having another wireless user try your signal.
BTW, I have encountered a consistent problem through the last few OSs of my Airport reception working fine mostly, then suddenly dying with no indication (other than the net stops working). I have to turn Airport off, then on again to get it working again. This is so annoying, I generally use ethernet now.

Using a Blackberry Storm 2 9550 with a Netgear wireless modem MBR624GU

Very recently I got the BlackBerry Storm2 (9550) and I have a Netgear 3G broadband wireless router, model# MBR624GU. I was using a USB720 modem and I would just plug it into the router and it would connect to the internet. I can tether the phone and connect to the internet on my desktop but I can't get it to work with the router. I (naive) thought I would be able to just plug the Storm 2 to my Netgear router and it would just connect - I was very wrong!!!! I have looked through a lot of posts but cannot find my particular problem. My first question is "Does the Blackberry Storm 2 work with the Netgear wireless router, model# MBR624GU? If it does, how do I get it to connect to the internet when I have the phone plugged into it? Thanks for any input!!!!!!!!!

Hmmm... Do I follow your post correctly that you are wanting to run the NetGear wireless router FROM the Storm, in order to broadcast the Wifi for your laptop to recieve the WiFi signal?
The Storm receives the WiFi signal, not the reverse.
Like this:
DSL/Cable signal with Internet >> Router >> WiFi signal >> BlackBerry Storm.
Not the reverse.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems conecting my HH router with a Netgear rou...

Similar Messages

Maybe you are looking for