Problems configuring EM in 10g

I want to monitor an Oracle instance called "orcl" with Enterprise manager in 10g. But the problem is I'm not able to configure this SID. When I try emca it throws up following messages:
Jun 21, 2005 12:17:15 PM oracle.sysman.emcp.EMConfig checkConfiguration
SEVERE: Repository already exists. Fix the error(s) and run EM Configuration Assistant again in standalone mode.
Could not complete the configuration. Refer to the log file for details
Now when I go to the website and access the URL: http://hostname:5501/em/ I get the following page
Database: hostname
The database status is currently unavailable. It is possible that the database is in mount or nomount state. [But the instance is running I can connect thru SQLPLUS]
Even playing with the "Startup" button i'm unable to access the database.
Please help and suggest me how to configure EM.
-Many thanks
Sunil

There are some parts which do not look very consistent (refresh button is not always present), but for a webbased application the layout is ok. You'll never get the fancy stuff you have in a fat client, but you can work with it from everywhere, not just from your workstation where you have installed the fat client.
So, how about logging a TAR or an enhancement request about the things that could need some improvement?
cu
Andreas

Similar Messages

Problems Configuring Application Server 10g R2

Í'm trying OAS 10gR2 and came upon what I believe is a configuration error, when I try to run a form that uses webutil and jacob to read a file, I get the following message in the java console:
2006-ago-02 15:40:10.312 ERROR>WUO-714 [OleFunctions.setExceptionValues()] No se han podido obtener los últimos detalles del error OLE; Excepción
null
2006-ago-02 15:40:25.00 ERROR>WUO-708 [OleFunctions.get_obj_property()] No se ha podido obtener la propiedad: Workbooks; Excepción
com.jacob.com.ComFailException: A COM exception has been encountered:
At Invoke of: Workbooks
Description: An unknown COM error has occured.
This only occurs on my 10gR2 configuration, I have another OAS installed on version 9.04 and everything works fine.
Could somebody point me in the right direction?

hello,
could you post at least some log?
regards,
fabrizio

Problem in Configuring webutility in 10g application

Hi,
Problem in Configuring webutility in 10g application
the message is
oracle.forms.webutil.ole.oleFunction bean not found
Client_OLE2.create_ole will not work
Please Help.

moolarDescent,
Thankyou for showing me direction.....
You're welcome, but you had all the ideas, I just gave you permission to "suck it and see".
There's a lesson in this... Try it... the worst thing that can (probably;-) possibly happen is "it won't work", so you try something else... that's what makes programming an adventure.
And don't call me sir... I keep lookin over me shoulder to see who you're talking to ;-)
keith.

Problems after configuring https in 10g

I have configured https in 10g. Now the problem is that it only works if I use the IP address of the server. It does not resolve the server name. Please let me know what I might be missing.
Thanks,
Prateek

Hi,
You can activate the Emergency User Store to get back in and reconfigure...
http://help.sap.com/saphelp_nw04/helpdata/en/3f/89f33eef091f39e10000000a114084/frameset.htm

Configuring Forms Builder 10g to run (Ctrl-R) against application server

I would like to run forms from my working directory against our development application server and config, rather than having a local OC4J running. I have configured this by setting the application server URL runtime preference to "http://<server>.<domain>:80/forms/frmservlet?config=dev". This works fine.
However, when I run the Form, I get "FRM-40010: Cannot read form H:\Neil\TAF00180.fmx". This is because we open our FMBs from a locally mapped drive (i.e. I opened the FMB from H:\Neil\TAF00180.fmb). When run against the application server it seems Forms Builder trys to run an executable with the same path as the FMB - H:\Neil\TAF00180.fmx, but the application server has no knowledge of a mapped H-drive.
The only solution I can think of is to have an H-drive mapped on the application server to the same location as our locally mapped network drive.
This doesn't seem like the correct solution to me. How should we configure Oracle Forms 10g and the application server to allow us to run our own working versions against the applications server and config?

Slava Natapov wrote:
I guess Neil concern is that OC4J and Forms Server are using own formsweb.cfg and .env files
And settings can be different.
For example what if local formsweb.cfg configured to run Jinitiator, but server formsweb.cfg configured for JPI, or they configured with different lookandfeel parameter, or local and server default.env use different NLS_DATE_FORMAT?Hi Slava, Hi Neil
I think this is more related to "discipline" for the developers....
@ Neil : How many developers do you have in your team ?
Are developers allowed to "customize" their formsweb.cfg and .env files ?
or more customized basejinit.htm, registry.dat, additional jar files ... etc
or more using different oracle_home for their installation of Developer Suite.
@ Slava : Using local formsweb.cfg and .env files might not be a problem if every developer machine is installed the same way (i.e. the same oracle_home).
Also, I don't think that using workingDirectory to network shared connection for each developer is a solution
[dev1]
workingDirectory= H:/dev1
[dev2]
workingDirectory= H:/dev2
And at least this is requiring customized *.env files ! as the forms_path should be set for runtime in it for each developer.
The registry entry is only for the builder to find the path to mmb and pll files for example, and compile well, but the runtime is using *.env files.
And what about developing in windows and deploy it to linux ?
I recently managed a project with junior and undisciplined developers. The boss had the same concern about each network drive per developer.
My concern was how to eliminate all subjective considerations..
And my answer was "Subversion" no mess with local or network version with the "copy of the copy of the copy of the fmb files".
So all forms_path were set to C:\myApp\forms etc and each developer made a checkout and commit versions twice a day.
And the Application Server was also "checked out" to have the latest revision and then ran it into a pre-version for production.
If I had to make some important changes in the *.olb file or the *.pll files then I made a commit for all developers and then re-compile all *.fmb and re-commit and checkout again.
I really don't matter if the developer used jinitiator or jpi but the right working copy.
And standalone OC4J was enough to make basics tests for each developer.
More tests were made by project managers at the application server level and then adjustments (if required) where sent to developers.
Hope this helps.
Regards,
Jean-Yves

Problems configuring HP Laserjet M1213nf MFP with Mac via AirPrint

Hello,
I have a HP Laserjet M1213nf MFP printer, connected to a Dlink DSL-2730U ADSL router. I am having problems configuring the printer with my Macbook running OSX Yosemite. I can see the printers name in nearby printers but when I try to add the printer, the mac gives me an error saying, "unable to communicate with the printer at this time". The network settings on the printer are configure for iPv4 and iPv6 addresses.
Previously, I had the ADSL DSL-2750U model router, and the printer was connected fine. I did not face any issues then. I have been facing problems since I changed my router so the problem should be in the router. I have the IP for the printer reserved in the DHCP reservation list on the router settings using the mac address of the printer.
Can someone please help me out here? Is there something I am probably missing.
Rgds
~n~

I talked to the DLink Support. They asked me to disable an option called "MultiAP Isolation" and Voila, the printer is working fine. I can add it to all my devices on the wireless network. I looked up google. Apparently, this isolation feature present in some routers, prevent wifi clients to interact with other devices connected to the wired network and also with each other. Thats why only my desktop which was also connected wired was only able to access the printer and not the laptops connected wirelessly.
Problem solved. Thanks for all your help on this one.
Cheers!

Problems to initiate oracle 10g express edition

Good afternoon I am speaking of Brazil with a text translator.
But I have installed Hundreds and I am trying to install oracle 10g express edition release 2.
I am with a problem in the Oracle 10g Express Edition in the installation part when I vo to initiate the service, it does not initiate.
And when I give I command /etc/init.d/oracle-xe status appears the following message: Your default context is user_u: system_r: unconfined_t. Of it you want you choose different one? [n]
I do not know more what to make to decide this.
I thank the attention.
Gabriel.
Message was edited by:
user523701

Oracle XE has it's own forum - to register and discuss XE problems with XE experts use URL http://www.oracle.com/technology/xe/registration
Once you have registered, you sign in to the forums and the link to the XE forum is there. But you do have to sign in as the user who registered XE.
You will also need to provide a few more pieces of information:
1) actual distro and version of Linux
2) userid used to install XE (should be root)
3) userid used to run "/etc/init.d/oracle-xe start" (should be root)

Problem In Joing AWM 10G Cube

Hi David,
This is in continuation of the Thread : 'Problem In Joing AWM 10G Cube' to which you have replied. But I was unable to post my reply in the same Thread. So I am opening another Thread with almost same subject line. Below are the things that you wanted from me.
The Scenario is as below:
CREATE TABLE W_POSITION_D
ROW_WID NUMBER, PK and Refers to FACT.POSITION_WID
NAME VARCHAR2(60),
STREET VARCHAR2(60),
CITY VARCHAR2(60),
STATE VARCHAR2(60),
INTEGRATION_ID NUMBER PRIMARY KEY --> Refers FK W_POSITION_DH.LVL1_ID
CREATE TABLE W_POSITION_DH
ROW_WID NUMBER,
LVL1_ID NUMBER PRIMARY KEY REFERENCES W_POSITION_D(INTEGRATION_ID),
LVL2_ID VARCHAR2(60),
LVL3_ID VARCHAR2(60),
LVL1_NAME VARCHAR2(60),
LVL2_NAME VARCHAR2(60),
LVL3_NAME VARCHAR2(60)
CREATE TABLE FACT
POSITION_WID NUMBER REFERENCES W_POSITION_D(ROW_WID),
PRODUCT_WID NUMBER, -- REFERENCES Product Dim column
SALES_UNIT NUMBER,
CONSTRAINT fact_pk PRIMARY KEY (POSITION_WID, PRODUCT_WID)
As a result of which I need to join FAct -> W_POSITION_D and W_POSITION_D --> W_POSITION_DH to show Fact.SALES_UNIT aggregated against W_POSITION_DH.LVL3_ID.
Thanks..
ChD

Thanks for clarifying the fact join. I'm sorry to keep on at this, but table W_POSITION_D can only have one primary key. Do you mean it is a unique key?
CREATE TABLE W_POSITION_D
ROW_WID NUMBER UNIQUE NOT NULL ,
NAME VARCHAR2(60),
STREET VARCHAR2(60),
CITY VARCHAR2(60),
STATE VARCHAR2(60),
INTEGRATION_ID NUMBER PRIMARY KEY
)In any case I think you should define a view to join W_POSITION_D and W_POSITION_DH together. This can serve as the basis for your dimension in AWM.
CREATE OR REPLACE VIEW W_POSITION_VIEW
AS SELECT
D.ROW_WID,
D.NAME,
D.STREET,
D.CITY,
D.STATE,
DH.LVL1_ID,
DH.LVL2_ID,
DH.LVL3_ID,
DH.LVL1_NAME,
DH.LVL2_NAME,
DH.LVL3_NAME
FROM W_POSITION_D D, W_POSITION_DH DH
WHERE DH.LVL1_ID = D.INTEGRATION_ID
/

Problems configuring Platform Domain with MS Sql Server

Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
[config.xml]

Try removing the server section from the SchemaProperties line.
Preferrably do not use localhost or hostnames in the server
configuration file.
<RDBMSRealm
Name="wlcsRealm"
DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:yourIPAddress:1433"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"
SchemaProperties="user=system;password=weblogic"/>
Also consider ...
If you have a new Portal database created in SQL Server?
Does the user system have the Portal database as his default database?
-- Jim
Vikram wrote:
Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Domain Name="epmsDomain">
<Log
FileName="logs/wl-domain.log"
Name="epmsDomain"
/>

<Server
Name="platformServer"
     ListenAddress="localhost"
ListenPort="7501"
NativeIOEnabled="true"
TransactionLogFilePrefix="logs/"
>
<SSL
Name="platformServer"
ListenPort="7502"
Enabled="true"
ServerCertificateChainFileName="ca.pem"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
/>
<Log
FileName="logs/weblogic.log"
/>
<WebServer
DefaultWebApp="splashPage"
LogFileName="./logs/access.log"
LoggingEnabled="true"
Name="platformServer"
/>
</Server>

<JDBCConnectionPool
Name="commercePool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
InitialCapacity="20"
MaxCapacity="20"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
Targets="platformServer"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
/>

<JDBCConnectionPool
CapacityIncrement="2"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
InitialCapacity="8"
LoginDelaySeconds="1"
MaxCapacity="36"
Name="wliPool"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
RefreshMinutes="0"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true"
Targets="platformServer"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="weblogic.jdbc.pool.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="WLAI_DataSource"
Name="WLAI_DataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource"
Name="TXDataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="WLCHub.DS"
Name="WLCHub.DS"
PoolName="wliPool"
Targets="platformServer"/>
/>

<JDBCTxDataSource
     EnableTwoPhaseCommit="true"
JNDIName="cgDataSource"
Name="cgDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="cgSampleDataSource"
Name="cgSampleDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JMSConnectionFactory JNDIName="weblogic.jws.jms.QueueConnectionFactory"
Name="cgQueue" Targets="platformServer"/>
<JMSJDBCStore ConnectionPool="commercePool" Name="cgJDBCStore" PrefixName="WEBLOGIC"/>
<JMSServer Name="cgJMSServer" Store="cgJDBCStore" Targets="platformServer">
<JMSQueue JNDIName="jws.queue" Name="cgJWSQueue" StoreEnabled="default"/>
</JMSServer>
<JTA Name="epmsDomain" TimeoutSeconds="3600"/>


<JDBCConnectionPool
Name="dataSyncPool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="WEBLOGIC"
InitialCapacity="1"
MaxCapacity="5"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
Targets="platformServer"/>
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.dataSyncPool"
Name="dataSyncPool"
PoolName="dataSyncPool"
Targets="platformServer"/>
/>

<Security
GuestDisabled="false"
Name="epmsDomain"
PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm"
CompatibilityMode="true"
/>
<PasswordPolicy
Name="wl_default_password_policy"
/>
<Realm
Name="wl_default_realm"
CachingRealm="wlcsCachingRealm"
FileRealm="wl_default_file_realm"
/>
<CachingRealm
BasicRealm="wlcsRealm"
CacheCaseSensitive="true"
Name="wlcsCachingRealm"
/>
<RDBMSRealm DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:localhost:1433"
SchemaProperties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Name="wlcsRealm"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"/>
<FileRealm
Name="wl_default_file_realm"
/>
<StartupClass
ClassName="com.beasys.commerce.ebusiness.security.KeyBootstrap"
FailureIsFatal="false"
Name="KeyBootstrap"
Targets="platformServer"
/>

<JMSConnectionFactory Name="WLI_B2B_TopicFactory"
JNDIName="com.bea.wli.b2b.server.TopicConnectionFactory"
AllowCloseInOnMessage="true"
UserTransactionsEnabled="true"
Targets="platformServer"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wli.b2b.rosettanet.QueueConnectionFactory"
Name="RNQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="false"
DefaultDeliveryMode="Persistent"
DefaultPriority="4"
DefaultTimeToLive="0"
JNDIName="com.bea.wlai.JMSConnectionFactory"
MessagesMaximum="10"
Name="WLAI_JMSConnectionFactory"
OverrunPolicy="KeepOld"
UserTransactionsEnabled="true"
Targets="platformServer"/>
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.TopicConnectionFactory"
Name="wlpiFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.QueueConnectionFactory"
Name="wlpiQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSJDBCStore
ConnectionPool="wliPool"
Name="JMSWLIStore"
PrefixName="PBPUBLIC"
/>
<JMSServer Name="WLIJMSServer"
Targets="platformServer"
TemporaryTemplate="TemporaryTemplate"
Store="JMSWLIStore">
<JMSTemplate Name="TemporaryTemplate"/>

<JMSQueue Name="WLI_B2B_RNEncoderQueue"
JNDIName="com.bea.wli.b2b.rosettanet.EncoderQueue"/>
<JMSTopic Name="WLI_B2B_Topic"
JNDIName="com.bea.wli.b2b.server.B2BTopic"/>
<JMSQueue Name="WLI_B2B_OutboundQueue"
JNDIName="com.bea.b2b.OutboundQueue"/>

<JMSTopic Name="wlpiEvent"
JNDIName="com.bea.wlpi.EventTopic"/>
<JMSQueue Name="WLI_BPM_Timer"
JNDIName="com.bea.wli.bpm.TimerQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_Event"
JNDIName="com.bea.wli.bpm.EventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_ValidatingEvent"
JNDIName="com.bea.wli.bpm.ValidatingEventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSTopic Name="WLI_BPM_Error"
JNDIName="com.bea.wli.bpm.ErrorTopic"/>
<JMSTopic Name="WLI_BPM_Audit"
JNDIName="com.bea.wli.bpm.AuditTopic"/>
<JMSTopic Name="WLI_BPM_Notify"
JNDIName="com.bea.wli.bpm.NotifyTopic"/>

<JMSQueue Name="WLAI_ASYNC_REQUEST_QUEUE"
JNDIName="com.bea.wlai.ASYNC_REQUEST_QUEUE"/>
<JMSQueue Name="WLAI_ASYNC_RESPONSE_QUEUE"
JNDIName="com.bea.wlai.ASYNC_RESPONSE_QUEUE"/>
<JMSQueue Name="WLAI_EVENT_QUEUE"
JNDIName="com.bea.wlai.EVENT_QUEUE"/>
<JMSTopic Name="WLAI_EVENT_TOPIC"
JNDIName="com.bea.wlai.EVENT_TOPIC"/>
     
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_ASYNC_RESPONSE_QUEUE" Name="WLAI_WORKSHOP_ASYNC_RESPONSE_QUEUE"/>
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_EVENT_QUEUE" Name="WLAI_WORKSHOP_EVENT_QUEUE"/>

<JMSQueue Name="WLI_FailedEvent"
JNDIName="com.bea.wli.FailedEventQueue"
StoreEnabled="true"/>
<JMSTemplate Name="WLI_JMSTemplate"
ErrorDestination="WLI_FailedEvent"
RedeliveryDelayOverride="60000"
RedeliveryLimit="10"/>
</JMSServer>
<JMSJDBCStore Name="JMSWLIStore"
ConnectionPool="wliPool"
PrefixName="platformServer"/>






<Application
Deployed="true"
Name="taxWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/taxWSApp"
TwoPhase="true"
>
<EJBComponent
Name="tax"
URI="tax.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="tax-webservice"
URI="tax-ws"
Targets="platformServer"
/>
</Application>
<Application
Deployed="true"
Name="paymentWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/paymentWSApp"
TwoPhase="true"
>
<EJBComponent
Name="payment"
URI="payment.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="payment-edit webservice"
URI="pay-ws"
Targets="platformServer"
/>
</Application>

<Application
Deployed="true"
Name="wlpDocsApp"
Notes=""
Path="C:/bea/weblogic700/portal/lib"
TwoPhase="true"
>
<WebAppComponent
IndexDirectoryEnabled="false"
Name="wlpDocs"
Targets="platformServer"
URI="wlpDocs.war"
ServletReloadCheckSecs="300"
/>
</Application>

<Application
Deployed="true"
Name="portalApp"
Notes=""
Path="C:/bea/user_projects/epmsDomain/beaApps/portalApp"
TwoPhase="true"
>
<ApplicationConfiguration
Name="portalApp"
Targets="platformServer"
URI="META-INF/application-config.xml"
/>
<EJBComponent
Name="events"
Targets="platformServer"
URI="events.jar"
/>
<EJBComponent
Name="pipeline"
Targets="platformServer"
URI="pipeline.jar"
/>
<EJBComponent
Name="property"
Targets="platformServer"
URI="property.jar"
/>
<EJBComponent
Name="rules"
Targets="platformServer"
URI="rules.jar"
/>
<EJBComponent
Name="usermgmt"
Targets="platformServer"
URI="usermgmt.jar"
/>
<EJBComponent
Name="customer"
Targets="platformServer"
URI="customer.jar"
/>
<EJBComponent
Name="ebusiness"
Targets="platformServer"
URI="ebusiness.jar"
/>
<EJBComponent
Name="portal"
Targets="platformServer"
URI="portal.jar"
/>
<EJBComponent
Name="campaign"
Targets="platformServer"
URI="campaign.jar"
/>
<EJBComponent
Name="catalogws"
Targets="platformServer"
URI="catalogws.jar"
/>
<EJBComponent
Name="document"
Targets="platformServer"
URI="document.jar"
/>
<EJBComponent
Name="ejbadvisor"
Targets="platformServer"
URI="ejbadvisor.jar"
/>
<EJBComponent
Name="mail"
Targets="platformServer"
URI="mail.jar"
/>
<EJBComponent
Name="placeholder"
Targets="platformServer"
URI="placeholder.jar"
/>
<WebAppComponent
Name="toolSupport"
Targets="platformServer"
URI="toolSupport"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="tools"
Targets="platformServer"
URI="tools"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="datasync"
Targets="platformServer"
URI="datasync"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="splashPage"
Targets="platformServer"
URI="splashPage"
ServletReloadCheckSecs="300"
/>

</Application>
<Application
Deployed="true"
TwoPhase="true"
StagedTargets="platformServer"
Name="p13nConsoleApp"
Path="C:/bea/weblogic700/portal/lib"
>
<WebAppComponent
Name="p13nConsole"
ServletReloadCheckSecs="300"
Targets="platformServer"
URI="p13nConsole.war"
/>
</Application>

<Application Deployed="true" LoadOrder="900" Name="EAI" Path="C:/bea/weblogic700/samples/workshop/wlai/ear/" TwoPhase="true">
<EJBComponent
DeploymentOrder="100"
Name="repository-ejb.jar"
     Targets="platformServer"
URI="repository-ejb.jar"/>
<EJBComponent Name="WLI-B2B Startup"
DeploymentOrder="200"
Targets="platformServer"
URI="b2b-startup.jar"/>
<EJBComponent DeploymentOrder="300" Name="b2b-rosettanet.jar" Targets="platformServer" URI="b2b-rosettanet.jar"/>
<WebAppComponent DeploymentOrder="400" Name="b2b.war" Targets="platformServer" URI="b2b.war"/>
<WebAppComponent DeploymentOrder="500" Name="b2bconsole.war" Targets="platformServer" URI="b2bconsole.war"/>
<EJBComponent DeploymentOrder="600" Name="WLI-AI Server" Targets="platformServer" URI="wlai-server-ejb.jar"/>
<WebAppComponent DeploymentOrder="700" Name="wlai" Targets="platformServer" URI="wlai.war"/>
<EJBComponent DeploymentOrder="800" Name="WLI-AI Async Processor" Targets="platformServer" URI="wlai-asyncprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="900" Name="WLI-AI Event Processor" Targets="platformServer" URI="wlai-eventprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="1000" Name="wlpi-ejb.jar" Targets="platformServer" URI="wlpi-ejb.jar"/>
<EJBComponent DeploymentOrder="1100" Name="wlpi-master-ejb.jar" Targets="platformServer" URI="wlpi-master-ejb.jar"/>
<EJBComponent DeploymentOrder="1200" Name="wlpi-mdb-ejb.jar" Targets="platformServer" URI="wlpi-mdb-ejb.jar"/>
<EJBComponent DeploymentOrder="1300" Name="WLXTEJB.jar" Targets="platformServer" URI="WLXTEJB.jar"/>

Configuring APS for 10G ITU w/ Splitter

Does anyone have experience on configuring APS for 10G ITU card with Splitter so that in a case of signal degrade it will switchover to the protection path? The default switchover mechanism is based on LOL (Loss-Of-Light) but it wont help if signal degrades for example to -25dB. All experiences and best practices are wellcome.

I know the protection schemes (client, splitter, Y-cable etc.) but my question is how to configure splitter protection so that in a case of signal degrease it will do switchover to the protection path.
See below an output from ONS15530:
ONS15530_1>sh aps
AR : APS Role, Wk: Working, Pr: Protection
AS : APS State, Ac: Active, St: Standby, NA: Not Applicable
IS : Interface State, Up: Up, Dn: Down
MPL: Minimum Protection Level, SD: Signal Degrade, SF: Signal Failure
LOX: Loss of Light/Loss of (CDR) Lock/Loss of Frame/Sync,
LOL: Loss of Light, - not currently protected
Interface AR AS IS MPL Redundant Intf Group Name
~~~~~~~~~~~~~~~~~~~~~ ~~ ~~ ~~ ~~~ ~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
Wavepatch1/0/0 Wk Ac Up LOX Wavepatch1/0/1 CH1
Wavepatch1/0/1 Pr St Up - Wavepatch1/0/0 CH1
So APS will switch to the protection path only in a case of Loss of Light/Loss of (CDR) Lock/Loss of Frame/Sync. So it WONT do the failover if RX signal level degreases below the minimum RX level (-23dB for 10G ITU card), because there is still light coming (not LOL case). So how do I protect my system against this kind of signal degreade?
rgds,
Jp

SSL configuration on oracle 10g realease 3 web server

what all are the changes should i do
in ssl.conf,httpd.conf,opmn.xml
to enable ssl.
i have clustered one web server and one application server
i have the authorized trusted certificate from CA.

SSL configuration on oracle 10g webserver release 3

Problem configuring Username token profile on ALSB

Hi All !!
First of all, thanks for your support!!
I'm facing a problem configuring an active intermediary Proxy service with username token profile. This proxy service has a security policy referencing Auth.xml file to implement Username token profile. That proxy calls a business service which calls a web service.
On test page, username and password is requested (already created in the security domain), then an error is returned "Unable to add security token for identity".
Below you can find the Invocation Trace:
Invocation Trace
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<per:getPersona xmlns:per="http://com/indra/persona">
<per:nombre>string</per:nombre>
<per:apellidos>string</per:apellidos>
</per:getPersona>
</soapenv:Body>
added $header
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
added $inbound
<con:endpoint name="ProxyService$PruebaWSsecurity$PersonaProxy92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>/PersonaProxy92</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
*<con:security>*
*<con:transportClient>*
*<con:username><anonymous></con:username>*
*</con:transportClient>*
*<con:messageLevelClient>*
*<con:username>securityUser</con:username>*
*<con:principals>*
*<con:group>Administrators</con:group>*
*<con:group>IntegrationAdministrators</con:group>*
*</con:principals>*
*</con:messageLevelClient>*
*</con:security>* </con:endpoint>
added $messageID
2741921765813726088-1b0fcf1c.12204e4868c.-8f3
RouteNode1
Routed Service
Route to: "PersonaBusiness92"
$outbound:
<con:endpoint name="BusinessService$PruebaWSsecurity$PersonaBusiness92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<per:getPersona xmlns:per="http://com/indra/persona">
<per:nombre>string</per:nombre>
<per:apellidos>string</per:apellidos>
</per:getPersona>
</soapenv:Body>
$header (request):
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="BusinessService$PruebaWSsecurity$PersonaBusiness92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>http://esmadaix01:9103/WSPersona/Persona</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="SOAPAction" value=""""/>
<tran:user-header name="X-Powered-By" value="Servlet/2.4 JSP/2.0"/>
<http:Content-Type>text/xml; charset="utf-8"</http:Content-Type>
<http:Date>Mon, 22 Jun 2009 10:34:18 GMT</http:Date>
<http:Transfer-Encoding>chunked</http:Transfer-Encoding>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $header
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>
changed $inbound
<con:endpoint name="ProxyService$PruebaWSsecurity$PersonaProxy92" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>getPersona</con:operation>
</con:service>
<con:transport>
<con:uri>/PersonaProxy92</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>securityUser</con:username>
<con:principals>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
changed $attachments
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
changed $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<m:getPersonaResponse xmlns:m="http://com/indra/persona">
<persona>
<correo>[email protected]</correo>
<telefono>91546789</telefono>
</persona>
</m:getPersonaResponse>
</soapenv:Body>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
*<con:reason>*
*A web service security fault occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Unable to add security token for identity]*
*</con:reason>*
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</err:faultcode>
<err:faultstring>
Unable to add security token for identity
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>

We have the same problem.
Have you the reposne?
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
</soapenv:Envelope>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="unt_ZqnW7MTAb7P77cPL" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>weblogic10</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">??????????????</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>
Unable to add security token for identity
</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>
Invocation Trace
(receiving request)
Initial Message Context
added $body
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
added $header
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
added $inbound
<con:endpoint name="ProxyService$ctxweb$t17i_wss-1" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>/ctxweb/t17i_wss_1</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>weblogic10</con:username>
<con:principals>
<con:group>AdminChannelUsers</con:group>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
added $messageID
6412299231164769748--466a8253.12535a4d4fe.-7f29
RouteTo_NORA-bs
Routed Service
Route to: "NORA-bs"
$outbound:
<con:endpoint name="BusinessService$business$NORA-bs" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
</con:request>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
$body (request):
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<t17:pais_getByDesc xmlns:t17="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<t17:value>bul</t17:value>
<t17:responseWithParents>false</t17:responseWithParents>
</t17:pais_getByDesc>
</soapenv:Body>
$header (request):
<soapenv:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
</soapenv:Header>
$attachments (request):
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
Message Context Changes
added $outbound
<con:endpoint name="BusinessService$business$NORA-bs" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>
http://www.integracion.jakina.ejiedes.net/t17iApiWSWar/t17iApiWS
</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<tran:user-header name="Set-Cookie" value="JSESSIONID=Q02mLVvKw8hRcvYm7nwmyJyCQHC2FJknpGbltNPnsqp2gstzHy0M!-1566668667!734317392; path=/"/>
<http:Connection>close</http:Connection>
<http:Content-Length>666</http:Content-Length>
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:Date>Tue, 01 Dec 2009 14:59:22 GMT</http:Date>
<http:Server>
Apache/2.0.59 (Unix) mod_ssl/2.0.59 OpenSSL/0.9.7a
</http:Server>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">OK</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<http:http-response-code>200</http:http-response-code>
</con:response>
</con:transport>
<con:security>
<con:doOutboundWss>false</con:doOutboundWss>
</con:security>
</con:endpoint>
changed $body
<env:Body xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<m:pais_getByDescResponse xmlns:m="http://www.ejie.es/webServiceEJB/t17iApiWSWar">
<n1:result xsi:type="n2:ArrayOfPais" xmlns:n1="http://www.ejie.es/webServiceEJB/t17iApiWSWar" xmlns:n2="java:t17i.vo">
<n2:Pais xsi:type="n2:Pais">
<n2:descripcionOficial>Bulgaria</n2:descripcionOficial>
<n2:id>104</n2:id>
</n2:Pais>
</n1:result>
</m:pais_getByDescResponse>
</env:Body>
changed $attachments
<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>
changed $inbound
<con:endpoint name="ProxyService$ctxweb$t17i_wss-1" xmlns:con="http://www.bea.com/wli/sb/context">
<con:service>
<con:operation>pais_getByDesc</con:operation>
</con:service>
<con:transport>
<con:uri>/ctxweb/t17i_wss_1</con:uri>
<con:mode>request-response</con:mode>
<con:qualityOfService>best-effort</con:qualityOfService>
<con:request xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
<http:SOAPAction>""</http:SOAPAction>
</tran:headers>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:request>
<con:response xsi:type="http:HttpResponseMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
<http:Content-Type>text/xml</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
</con:response>
</con:transport>
<con:security>
<con:transportClient>
<con:username><anonymous></con:username>
</con:transportClient>
<con:messageLevelClient>
<con:username>weblogic10</con:username>
<con:principals>
<con:group>AdminChannelUsers</con:group>
<con:group>Administrators</con:group>
<con:group>IntegrationAdministrators</con:group>
</con:principals>
</con:messageLevelClient>
</con:security>
</con:endpoint>
changed $header
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>
System Error Handler
$fault: <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-386201</con:errorCode>
<con:reason>
A web service security fault occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Unable to add security token for identity]
</con:reason>
<con:details>
<err:WebServiceSecurityFault xmlns:err="http://www.bea.com/wli/sb/errors">
<err:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</err:faultcode>
<err:faultstring>
Unable to add security token for identity
</err:faultstring>
</err:WebServiceSecurityFault>
</con:details>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>

Problem configuring RVS4000 router

I just purchase the Cisco Router RVS4000 vpn and I am having problem configuring the VPN option. I just try all way I could imaging, but somehow something are missing and I don't know what it is. Here are a image of my current configuration.

Without examining this in detail, it is only half of the equation. The other end of the tunnel needs to be configured as well. BTW, don't ever post your WAN IP and shared key in a public forum. Change the key.

Problem using template in database configuration assistant Oracle 10g

Hi,
I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
When I try to use the template though, I get an error (at about 4% through the database creation) saying:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
Heres the template file contents (KM1.dbt)
<DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="UDC7"/>
<initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="65536"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<tablespace>SNIKEB</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">20</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">5</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SNIKEB">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
can anyone explain why I keep getting this error?
Thanks

Error:     ORA-9314
Text:     sltln: error translating logical name
Cause:     Internal buffer may have overflowed
Action:     See OSD error accompanying this message
Check alertlog and trace files.
Message was edited by:
FeNiCrC_Neil

Problem in using JDeveloper 10g with JHeadstart

I am using JDeveloper 9.0.3 and jheadstart 9.0.4.5 and I would like to test jdeveloper 10g preview with JHeadstart.
So, I have downloaded the JDeveloper 10g to test it with my old application.
Having run the Jdeveloper for the first time, I realized that Jdeveloper
installed the jheadstart automatically and following message was shown in the message window :
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\PrjWizard.jar!\META-INF\jdev-ext.xml
Error: <Line 12, Column 24>: XSD-2034: (Error) Element 'description' not expected.
Error: <Line 13, Column 17>: XSD-2034: (Error) Element 'help' not expected.
Error: <Line 17, Column 27>: XSD-2034: (Error) Element 'dependency_addin' not expected.
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JhsShare.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\MvcFrameworkServiceFileViewer.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JHeadstartDesignerGenerator.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JAGLauncher.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\Bc4jPropertyEditor.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JASEditor.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
So I try to test one of my old application with this configuration. After Jdeveloper migrated my workspace and projects and business componenet
to the newer version, I run the application generator. It worked fine without any problem but after running the application, I got an error page showing
that my bc4j.xcfg is not in the path.
On the other hand, I found out that when I wanted to view my UIX pages, 2 dialog boxes appeared. The first one asked to upgrade
to UIX 2.2's new expression language syntax and the other which is on the top of the first one, showing that UIX runtime failed to render the page
with following detail :
javax.servlet.ServletException: No page broker found!
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at oracle.cuervo.share.servlet.PreviewServletContainer.handleRequest(PreviewServletContainer.java:305)
     at oracle.cuervo.share.servlet.PreviewServletContainer.handleRequest(PreviewServletContainer.java:229)
     at oracle.cabo.ide.addin.preview.UIXRenderThread._reallyLoad(UIXRenderThread.java:263)
     at oracle.cabo.ide.addin.preview.UIXRenderThread.runImpl(UIXRenderThread.java:203)
     at oracle.cabo.ide.addin.preview.BasePreviewThread.run(BasePreviewThread.java:79)
I think that I should have set some setting before use JHeadstart with JDeveloper.
Could anybody help me ?

Alex,
The document Sandra referred to applies to JDeveloper 10g preview (9.0.5.0). JHeadstart 9.0.4.5 will NOT work with JDeveloper 109 production (9.0.5.1).
We plan to release a new version end of april that is compatible with 9.0.5.1. See this thread for more info: JDeveloper 10g production, status JHeadstart?
Steven Davelaar,
JHeadstart Team.

Problems configuring EM in 10g

Similar Messages

Maybe you are looking for