Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

I recently purchased an Hp h8-1360t computer with a 2gb DDR3 AMD Radeon 7570 video card and an Hp 2711 LED monitor. I am having problems connecting both the monitor (dvi) and a 50" Sony LCD TV (hdmi) with a 50' hdmi cable. When starting the computer, once the initial Win 7 boot up is finished, the monitor screen goes blank, except for the mouse pointer. When I turn on the tv and select the correct input source a normal Win 7 screen with icons appears on the tv. Only the wallpaper picture displays on the monitor and no icons. If play a dvd movie it will only show up on the tv with the sound coming from the speakers attached to the computer.
I would like to retain control of the computer using the monitor. I tried to set the monitor up as the primary display source using the monitor configuration menu,but it won't allow me to save the dvi connection as the primary display source. The documentation that came with the computer and what I was able to find on the Hp site is lacking....to say the least.
Any assistance with this problem will be greatly appreciated.
Thanks,
Tony

First I would disconnect the TV HDMI cable from the computer. That should return the PC screen to normal. May have to reboot to get normal. Then reconnect the TV HDMI and go into the screen setup routine, paying attention to which screen is supposed to display what information.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

Is there a known conflict between a CalDigit FASTA-GU3 sata/USB 3 card and an ATI Radeon X1900XT video card?

Hello all.
I am having trouble with my Mac Pro (circa 2008) not powering up the monitor (an Apple HD Cinema Display 23 inch).
Here's some history.
For about two weeks I was having trouble waking up the monitor from sleep. I would have to reboot the computer to see the screen.
Then the screen wouldn't wake up after many reboots. I tried the Apple Cinema Display on my MacBook Pro laptop an on an older Mac Mini. The display didn’t' work on any of them.
I then hooked up a Samsung monitor to all three computers in turn. The Samsung worked fine with each.
From that I deduced that it was Apple HD Cinema Display that was at fault.
I replaced it with one I bought from a friend - in perfect working condition.
The new Apple Display worked fine with my Mac Pro.
Problem solved - or so I thought.
Now, a few days later, I am having a repeat of the same problem. The Apple Cinema Display won't wake up.
I removed all the peripheral devices, still no joy.
I removed and reseated the video card (after blasting all with compressed air).
Still no joy.
I then removed the CalDigit FASTA-GU3 sata/USB 3 card I installed about a year ago.
Now the Apple Display came back to life.
So my question is, are there know conflicts between a CalDigit FASTA-GU3 and an ATI Radeon X1900XT video card?
If so - is there a fix?
Also open to other theories.
Other tech specs:
Mac Pro (from around 2008) 2 x 3 GHZ Quad Intel Xeon.
OSX Lion
The video card is an ATI Radeon X1900XT (512 MB)
Apple HD Cinema Display - 23 inch
Many thanks.

Thanks for the info on the Expansion Slot Utility. I found it and ran it. It shows no problems. It shows the ATI Radeon X1900XT to be properly installed and running at full capacity.
I found a reliable dealer of flashed ATI Radeon 5770 cards. A couple of trusted friends have had good luck with cards from the dealer.
So I will have that on stand-by for when/if the existing card fails completely.
Thanks everyone for your input.
A

Will fifa12 run in my iMac with specs..2.5 GHz Intel Core i5, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750M 512 MB, Mac OS X Lion 10.7.4 (11E53).

Will fifa12 run in my iMac with specs..?
2.5 GHz Intel Core i5,
4 GB 1333 MHz DDR3,
AMD Radeon HD 6750M 512 MB,
Mac OS X Lion 10.7.4 (11E53).

here is what you need. Yes it looks like it'll run fine
MAC
Mac OS® X 10.6.8 (Snow Leopard) or higher
PROCESSOR
Intel® Core™ 2 Duo processor
This game will not run on PowerPC (G3/G4/G5) based Mac systems.
MEMORY
4 GB RAM or more
GRAPHICS
ATI HD2600 or NVIDIA GeForce 9400M or greater with 256 MB of Video RAM.
This game will NOT run on the Intel GMA 950, X3100 or HD3000 class of video cards.
INPUT
Keyboard and mouse, or a supported controller*. Logitech® F310/F510 recommended. Microsoft® Xbox 360® or XInput Controllers are NOT officially supported. *NOTE: If your controller comes with a driver, please make sure that you have the most up-to-date controller drivers installed. Controllers without analog sticks do not allow for full functionality within the title.
FILESIZE
6.8GB
LANGUAGES
English, French, Italian, German, Spanish
OTHER REQUIREMENTS
Requires Origin account for game activation and online play.

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

Apple guarantees their work, take it back.

Need help - connecting Monitor and TV at same time with component video

I have a mac mini, connected via DVI to a monitor - I bought a DVI splitter to connect the monitor to one port and the tv to the other via a DVI to Video adapter, using component video. When I plug in the DVI to Video adapter, the primary monitor loses its connection and I cannot seem to get the TV to recognize the signal - what am I doing wrong?

In my case, the Barco Cine7 CRT projector I would like to connect the new Mini to accepts a pretty wide variety of analog component video formats, but I cannot find a listing of what the Mini supports. Presuming I use a DVI to VGA adapter and then a VGA to RGB cable, can the mini video card output any one of the following analog component formats:
RGBs or RGsB - R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync)
RGB with tri level sync - R, G and B with separate tri level sync or with tri level sync on green.
Component video - R-Y, Y and B-Y with separate sync or with compositesync.
Component video with tri level sync - R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.

Lenovo G510 AMD R5 230 video card problem

Hy Everybody!
I have a big problem, like everyone else. I bought a Lenovo G510 notebook, I installed Win7 PRO 64bit. Everything is working fine except the video card, wich is AMD Radeon R5 M230. In the control panel/device manager: the video card not working code 43.
I read a lot of topics, installed a lot of drivers, but nothing help. I tried to install the intel video driver but its not working either, during the installation I get a message: my computer not have the minimum configuration to install this driver. ???
Every driver I use, I get from the Lenovos official page for G510 notebooks.
The notebook configuration is:
Intel Core I5 4200M, CPU 2,50GH
4GB Ram
WIN7 64bit Service Pack 1
AMD Radeom R5 M230 VGA
Anyone have an idea to solve this problem?
Thank you!
Solved!
Go to Solution.

Hi Warnus,
Welcome to Lenovo Community!
As per the query we understood that you are looking for graphic driver for your Lenovo G510.
Please install Lenovo solution center application for your system and then run the application to update all the required drivers update and application.
http://support.lenovo.com/in/hi/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g510-no...
Check with this option and let us know the findings.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Msi 890fxa-g65 and two radeon 6950 video cards

Hi,
So far I have the one radeon 6950 with the MSI msi 890fxa-g65 motherboard. I was thinking of getting another 6950 down the road and was wondering if anyone was able to fit two 6950 video cards on a msi 890fxa-g65 motherboard.
It seems a bit tight. Also I currently have an Ultra brand 750W PSU. Is that enough?
Thanks.
Mike

Quote from: zerohedge101 on 27-March-11, 22:58:58
Thank for the response. The main impedance is on the motherboard connections for the front panel of the computer case. These pins are located at the bottom of the motherboard where the 6950 video card goes. The pin connections and the wire stick out quite a bit and the video card might crush them a little.
Is there some sort of adapter for those pin connections to make them go on a 90 degree instead of straight out. This is the only impedance to get that video card in really. The case is big enough even though its only a mid -tower.
Thanks for any help.
Yes, those are you HDD, power and stand-by switch connectors I believe. Yes, I have seen 90* adapters but I don't remember where. It might come with the case attachments or a Mobo I put together about a year ago. In any case, take your existing card and "gentaly" place it into that bottom slot without the pins inserted (mark or draw a little graph as to where those pins go). See if you still have a little bit of room for your connectors. Also, what kind of connectors are we talking here? USB external pins are here to. If you can live with just the MoBo USB ports, then forget the external USB connection then. That way, simply put that card in and GO! Try it out.

After Effects and enabling GPU with the AMD Radeon R9 M295X

I have the new 27in iMac with an AMD Radeon R9 M295x. As far as I can tell, I am limited to CPU rendering in After Effects.
I keep reading that GPU is available as long as I don't need CUDA and nVidia for Ray Tracing.
As it is, I'm only seeing CPU available. GPU is grayed out.

Show a screenshot of exactly what you're seeing that has you concerned. From your brief description, it seems that everything is functioning normally.

Problem connect form6i and Oracle Database 10g

I can't connect form6i to Oracle Database 10g
When complete user/password@database fatal error produce:
"Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience"
Error Detail:
AppName: ifbld60.exe AppVer: 6.0.8.27 ModName: ora805.dll
ModVer: 0.0.0.0 Offset: 000b4f04
Product Install:
- Forms Version: Forms [32 bits] Versión 6.0.8.27.0
- Oracle Database: 10.2.0
- Win XP professional with SP2.
Any idea what might cause Forms to shutdown ubnormally?
Thanks

If your database is using the AL32UTF8 character set, Forms 6i cannot connect.
Read this thread:
connecting form 6i to oracle database 10G express edition

Problems connecting iMac and iWire to Sony PlayStation 3

Hi. Simple issue. I cannot for the life of me get my Sony PS3 to connect to my iWire local network at home, which otherwise I've never had any problems with.
When I go through the (simple) setup procedure on the PlayStation, it locates my network, then asks me for my WLAN Key Settings, giving me the options of None, WEP and WPA-PSK/WPA2-PSK. I try entering my iWire password into the system as a WEP key (which I think is right), then it says it's not recognised and prompts me to put in hexadecimal settings (?). I try the same thing on the WPA option, again, it doesn't work. I've also tried putting in my Airport Express password, see if that changes anything, but it doesn't
I couldn't see a topic heading on this subject heading through a search, so forgive me if it's already been answered elsewhere. Anyway, I'm stumped, so if anyone's connected successfully, could they share how they did it and what exactly a WEP key is! [Incidentally, I posted this earlier, but I believe in the wrong section]

Thanks. My Airport Express is providing the wireless network - and on my Playstation, it comes up as Robert's Wireless Network (what I've called my AE network) and I put in what I know is the correct password for that network, but it comes up as unrecognised, even though I'm sure I've put in the correct word. So, if as you say I'm doing the right thing, then maybe I'm entering the information wrong, or need to add something to my standard WEP password?

8330 - Problem Connecting USB and HeadSet

When I first got my phone I noticed that the USB cable would disconnect if the phone was moved slightly making it very difficult to confirm it was charging. Also had a similar problem with the headset that came with the phone. Called Bell, they sent me a new phone.
Now, charging doesn't seem to be a problem but when connected with the computer, it still disconnects if it is moved slightly. Like the connection is loose or something!?
The headset that came with the phone still doesn't work, connects... but then disconnects even though the physical connection seems secure.
Oddly enough, a regular headset works just fine.
Anybody else have these types of connection problems? I'm going to call Bell, but it's been a few months now so I'm not sure if they will do anything for me... UGH!

I have some good news. iPhone 3.1 has been released to developers as a beta and it addresses (amongst other things) some bluetooth issues.
I'm happy to say that with this beta, I am able to use my Philips BT headsets as a stereo device to listen to music, adjust volume and to switch between music and a phone call.
The bad news is that I can't use the main button to activate voice control or the prev/next buttons to change songs. However, remember this is the first developer beta of 3.1 so this issues may get addressed before release.

Problems connecting - 9i and Win XP Pro

First off, I am a super duper beginner so I understand nothing of this application. I have Win XP Pro and have learned that 8i has issues with P4's so downloaded 9i instead of using the 8i CD I have. I also have the CD for Forms and Reports 6i also. My reason for the installation is a database programming class I am taking. At the current time I have 9i installed and I also installed 6i though am unsure if 9i will work with 6i. I tried to connect to SQL Plus using the username, pw, and hostname my professor gave me and I got an error msg saying "ORA-12541 TNS:no listener" BUT when I check the listener control thing and tell it to start the listener I get an error because it says it has already started and if i stop it and then start it again I still get the same message. I am able to log on to SQL using the generic username and password "Scott" and "tiger" with no hostname but I am unsure if this means anything as I know my info is correct. I am wondering if anyone can help me out. I no nothing about this application to be able to troubleshoot further and also am wondering if 9i will work with 6i. Thanks for reading this far and thanks in advance for any assistance. I think I have installed this app 3 times now and would love to get it all working properly so I can do my assignments....
Jo-Anne

Thanks for the reply. He gave us each our own usernames, our own passwords and the hostname to connect to the school. The school dns or ip address, either one, is not his it is the school's oracle server. I used my username and password and it gave me the listener error. In order for me to work from home I have to connect to the school's oracle server, i can't leave it blank. Does that make sense? Thanks again.

Problems with monitors and macpro

My macpro will not recognize a second monitor. I have the Lacie 22Blue III and the Eizo 240W. When I have both of them hhoked up, it will not let me adjust the resolution on the Eizo. If I switch ports, it will only recognize the Eizo and not the Lacie.
I first tried to hook up a Lacie 22 Blue IV....but it would not recognize it at all even though that monitor works fine on my G5.

Your "Mac Pro" is a notebook, forum here Mac Pro is a 65 lb tower.
I'd suggest that the forums for Mac OS and even Safari
I'd also clear the history and cache in Safari and restart.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/
It sounds like you installed a piece of junk. Adware-malware someone wants to force you to their site. MacKeeper?
Do you have a system backup? you might want to.
If you have MacKeeper that causes lots of trouble and uninstalling is both essential and not always 100% it seems. And it will cause your Mac to run slow like this, making it seem like you "need" it or to "clean your mac" which are all just POS junk.

Have problems connecting laptop and ipad

Hi, have been trying to connect my ipad 2 to my Acer laptop but cannot get them connected !

Connected how - via USB connection and if so, your iPad is not recognized by iTunes when connected?

Just got a new monitor, and Firefox says I need to upgrade my graphics card?

When I open Firefox, my screen goes black, then when it comes up, it has a canvas texture. I can't see the pictures clearly, even my desktop looks like a painter's canvas (texture). The troubleshooter said I needed to upgrade my graphics card, however Windows XP wouldn't let me upgrade the card.

http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
And see http://support.apple.com/kb/SP575

Problems connecting 1 monitor and 1 TV to 2gb DDR3 AMD Radeon 7570 video card.

Similar Messages

Maybe you are looking for