Problems connecting a psp to the net

i just replaced my psp that was stolen last year, when i had the first one i owned i could use the net on it and only get like 17% signal, now with this new one i get 55% signal, on someones linksys and there isnt any security on it, but if i try to get on the net it tell me to check my security settings, any ideas on how to fix??? thanks
petrie

Sorry, we are not here to help you break in to your neighbor's wireless system. If you cannot easily connect to your neighbor's system, then he doesn't want you to use it.
Why don't you try to connect to your own wireless network? You will probably get a stronger signal. If you are having trouble telling your network from your neighbor's, change your SSID from "linksys" to something unique.
Message Edited by toomanydonuts on 01-26-200711:58 PM
Message Edited by toomanydonuts on 01-27-200701:04 AM
Message Edited by toomanydonuts on 01-27-200702:38 AM

Similar Messages

Error message: There was a problem connecting to MobilMe. The request timed out.

I've never had an account with MobilMe. MobilMe is not listed as an account in iPhoto. All software on iMac is up to date. I'm running OSX 10.6.8. While working in iPhoto, editing or trying to upload photos to FaceBook from iPhoto I get the error message: There was a problem connecting to MobileMe. The request has timed out.
For some reason iPhoto wants to communicate with MobilMe, even though I've never had an account.
I worked with ExpressLane (case # 231899367) thinking it was a MobilMe issue). It was a dead end. Any suggestions to remedy this annoyance would be appreciated. Thanks. ILIJA.

Strange, I got this error for the first time last night. I have a 27" iMac (late 2010 model); with latest Aperture. I recently added a Flickr account (have had a Facebook account on there for some time). I was uploading some to my flickr account, and noticed that even though the "use actual size" setting was used, it was uploading tiny thumbnails and not the full version.
It was after this, that I got that error. I haven't tried it again, as I'm now on my macbook at work. Will try again tonight.
I've also, NEVER had a .mac account, so no possibility of it being a legacy account.

I am trying to connect my PSP to the interent via my Wire...

I am trying to connect my PSP to the interent via my Wireless router with no success. Does anyone have any ideas what I can do? The Router is WPA enabled and I've entered the correct key on the PSP but still no joy! help!

hi...let me know the model and the version no. of the router that you are using...also tell me the ISP details, so that i can tell you step by step configuration...

IPhone 5 has difficulties to connect by WLAN although the net is recognized., iPhone 5 has difficulties to connect by WLAN although the net is recognized.

iPhone 5 is unable to connect to wifi although Net wasi found.
The Same problem exists at Bluetooth
It Seems to be a Software failure. Does anybody know something about?
BR
Bernd

Look to the right under "more like this", theres plenty about this.

Problem saving gif file over the net

I am using a simple loop to save files using a URL Connection. It grabs html files fine and they look right but when I used to to download an animated gif it had an error. It saved the file but when I tried to open the image I got a "drawing failed" message.
I compared it to the working image and the sizes were identical. I also compared the characters in notepad and the beginning and end characters were identical. I looked at the preview in "My Computer" when you select it and it drew only the first line or so. This makes me believe it is a problem with how it switches lines when saving. I checked the ends of the lines though and they also seem identicall. Any ideas? Here is the code. Thankyou.
FileWriter fileName = new FileWriter(saveFileName);
BufferedReader in = new BufferedReader(
new InputStreamReader(
newConnection.getInputStream()
BufferedWriter out = new BufferedWriter(fileName);
for (;;) {
int data = in.read();
// Check for EOF
if (data == -1) break;
else {
System.out.print ( (char) data);
out.write(data);
}

GIF files are binary files and can be corrupted if you use the Reader and Writer classes. Use the *Stream classes, like FileInputStream and FileOutputStream.

Problem with file transfer over the net

Hi!I'm trying to make a program that allows to send/receive files and I'm almost done,except for a little problem:the file received has some bytes missing at the end!
For example if I send a text the last 2-3 lines are missing,same thing for an image,an html document,etc.,although the file opens without any problem.As transport-level protocol I'm using TCP so it's not a networking problem,I think the problem is in the application layer so I post here the code,hoping someone helps me out(in this example I'm trying to send an image .jpg):
Sender:
Socket connectionSocket=new Socket("ipadress",port);
FileInputStream source=new FileInputStream(System.getProperty("user.home")+"\\Documents\\image.jpg");
BufferedOutputStream send=new BufferedOutputStream(connectionSocket.getOutputStream());
int c;
while ((c = source.read()) !=-1)
send.write(c1);
Receiver
ServerSocket receiverSocket=new ServerSocket(port);
Socket connection=receiverSocket.accept();
BufferedInputStream rec=new BufferedInputStream(connection.getInputStream());
FileOutputStream receivedFile=new FileOutputStream(System.getProperty("user.dir")+"\\received.jpg");
int c;
while ((c = rec.read()) != -1)
receivedFile.write(c);I think the problem is in this code:somehow the sender stops sending bytes before the end of the file is actually reached...what do u think?

Thank you so much!At the end it was a very stupid mistake!:D
Btw now that the main problem is solved I continue posting asking for your opinion:is this program for you efficient enough?Or there's a better way to do file transfer?

Problems connecting second pc to the router

Hi everyone,
My first PC is connected to my FIOS router and everything is fine with that. I know the router admin login and the router password. But I am having a hard time connecting my second PC to my FIOS router and to the internet.
I have been using the FIOS Connection Wizard, and I have been getting the following message:
"Connectivity between your computer and your Verizon FIOS router is working fine, however we are unable to login to the router to collect the SSID and WEP Key"
It seems as though the connection wizard does not even acknowledge the router password I enter. I will type in the password, then press enter and the wizard does not seem to do much with the password. I rebooted the router, changed the router login and password, and entered those new details into the wizard, but the wizard wont connect. When I try again, the wizard prompts me for the password of the old admin!
Any ideas regarding how to solve this problem? I appreciate your help.

If you are using the FIOS connection wizard and it is asking for your SSID and WEP you are trying to set up a wirless connection.   Make sure to choose the correct option, it should be something like, set up new router or internet connection. ie. Don't choose, setup new wireless connection.
If you still have problems then,
On your computer that successfully connects to the internet, right click your local area connection under network connections and go to properties. Scroll down to Internet Protocol (TCP/IP) , highlight it and click the properties button. Use the same settings you find here on your second computer. If your router has DHCP turned off and under these properties your IP and DNS settings are visable then on your second computer input all the same settings except change the last number of your IP address.
Ex.       1st computer settings : IP - 192.168.10.15   then
               Set 2nd computer to : IP - 192.168.10.16
Hope this helps.

I continuously get this error: "There was a problem connecting to .mac. The request timed out"

I don't have a .mac acct - never have had one. I have moved my Aperture library to an external harddrive - and changed that to the library. It seems like I started having this problem around that time but I'm not sure. When I get the error I click "OK" and it goes away, only to re-pop a minute later. Tried running the reset permissions thing a few times. The only response I found in the forums was from a couple years ago where they WERE trying to connect to .mac
Aperture 3.1.2

Strange, I got this error for the first time last night. I have a 27" iMac (late 2010 model); with latest Aperture. I recently added a Flickr account (have had a Facebook account on there for some time). I was uploading some to my flickr account, and noticed that even though the "use actual size" setting was used, it was uploading tiny thumbnails and not the full version.
It was after this, that I got that error. I haven't tried it again, as I'm now on my macbook at work. Will try again tonight.
I've also, NEVER had a .mac account, so no possibility of it being a legacy account.

Problem connecting cRIO-9072 to the computer

We have to connect the cRIO-9072 to the computer remotely through a wireless medium. We have a fixed and dedicated IP address so that the network connected to the computer can talk to the cRIO in the remote location wirelessly. However, we are unable to connect the cRIO to the computer. There is no problem in connecting the cRIO to the computer through Ehternet cable physcially but when made wireless the computer no longer recongnises the cRIO.
What could be the solution to this issue ?

Hi rarun7,
If your cRIO is on a different subnet than your computer, there can be a few issues in connecting to it. I would recommend ensuring that the subnets match on both the computer and the cRIO. If your cRIO is still not showing up in Measurement and Automation Explorer (NI MAX) after the subnets match, please refer to the document I have provided below. Hopefully, some of the suggestions in the document will allow you to achieve a connection!
Why Does My CompactRIO Controller or Single-Board RIO Not Show Up in Measurement & Automation Explor...
| Zach J. | Applications Engineer | National Instruments |

PROBLEM CONNECTING MY BEFW11S4 TO THE INTERNET

OK FIRST OFF I GET IT USED OFF EBAY the guy said it came from his job.BUT OTHER THAN THAT.I CONNECTED THE 2 ETHERNET Cables one from the modem to the router and the other from the router port 1 to my laptop.i keep getting the router cannot connect to the internet message.i have bellsouth dsl service.i went in to reset the router but everytime i put my username and password for my dsl after its successfully reset the password i notice is longer than the one i use for my internet provider.can anyone tell me how to keep this from happening

here are some things to try, first make sure to reset the router, hold the reset button for 30 sec, the lights should blink, let them finish then continue, make sure to disconnect the modem from the router but keep it hardwired to the laptop, open a web page, and hit escape( you wont be able to do anything because there is no internet connection) hit ctrl+o and type 192.168.1.1, a security pop up screen will show up, type admin as password, hit enter, you will now be at the router setup page, change the ip address of the router to 192.168.2.1 and save settings, after the save is complete you can connect the modem back into the router and should be able to connect to the internet, if this works, you will need to use 192.168.2.1 to enter the router setup page to make any other changes ( such as wireless, security or firmware upgrades) if this does not work for you, reset the router and try this http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=2210&p_created=11109...
hope this helps
Felipe Diaz
using WRT600n

Connecting an n95 to the net

hi just got an n95 and cannot get it to connect to the internet via bluetooth it keeps on crashing my laptop i have a sitecom usb bluetooth adapter with the windows vista drivers installed as soon as i try to connect with the pcsuite my laptop crashes and will only reboot in safe mode now do i need to get the vista drivers for the n95 if thay are out or needed please help it is driving me mad Thanks in advance for any help

There isn't a service pack for Vista yet anyway is there?
Keep checking the other topics about Vista & Bluetooth - or search for those two words - there may have been a solution and I've missed it.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Can't connect iPhone 3G to the net

I have just bought a 3G iPhone in the UK.
I have now set it up and it works as a phone, but I can't get it to connect to the web.
I get an error message saying I'm not subscribed to a data service.
This may be a crashingly obvious question, but do I have to pay extra for this? Or is it that it takes a little while for this to be 'switched on' for me?
Thanks

In the U.S., a calling plan is chosen and the unlimited data plan for the iPhone is added separately, but required and automatically added by at&t during the activation process.
I suggest contacting O2 customer support.

TS1843 when at home, I cannot connect to aol from this computer. other computers have no problem connecting to aol using the same wireless, I was also able to connect to aol while at the apple store using their wireless. The problem seems specific to my

I cannot access aol from this computer. all other wedsites are fine, other computers can access aol from same wireless, and I can access aol when using another wireless.
problem is specific to this computer, at home with aol only.

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Problem in running servlets over the net & in non-root user mode(FC-4)

I have installed Tomcat 5.0.28 and it is running
successfully in Fedora core 4,I wrote a servlet,to access a mysql database and it is running correctly,but when i logged
onto non-root user, when i call the servlet through the
html page i get "page not found error" .This is happening even when i do it from other system.
I thank in advance if any could help me in this case

Did you try using %20 instead of a space? I know it works for URLs...worth a shot.

HT4623 I am having problem connecting my iphone to the computer can you help?

I have tried to up date my iphone but now it does not recognize the devise. i am stuck in the middle of the update and cannot use the phone. can you help me restart it?

Apple cant unlock phones and neither can anyone else here. Keep trying with Vodafone as only your carrier can do this.

Problems connecting a psp to the net

Similar Messages

Maybe you are looking for