Problems connecting and very slow speed
When trying to connect to my airport sometimes I've been getting an error message telling me that it can't connect. I have made no changes and moved nothign around. Also when it does finally connect it takes very long to load a page. As of right now I have just plugged an ethernet cable into my computer. Also my computer will no longer connect to the Airport automatically. Can someone please help?
Thank You
Tamara
Greetings Tamara Lyke,
To set up your computer to connect Automatically to your Airport:
go to System Preferences; click on Network; Location: Automatic, Show: Network Port Configurations; Make sure Airport is Checked and make sure you click on Apply now.
this might help too.....
http://www.apple.com/support/airport/
http://docs.info.apple.com/article.html?artnum=58543
I hope this helps...
Similar Messages
-
Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
EsraHello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
WRT54G always reseting and very slow speeds.
I don't know whats going on, I have a WRT54G router thats completely up to date with the firmware and the such. I am connected to it via Ethernet cable, and only use the wireless part for my videogame stuff, so its not just the wireless network thats messing up, its the hardwired that is losing connection. Every half hour or so the router loses its connection and I'll either have to just wait for it to reconnect or have to power down the router (and sometimes the modem, or restarting the whole computer) and power it back up for it to be able to connect again. I have tried completely reseting the routers settings and uninstalling the EasyLink Advisor and reinstalling that and reconfiguring the router but its still doing this. When I am able to connect, my internet speeds are very slow. I am used to getting 200-300k/sec but now I am getting maybe 80k/sec when downloading. Is it possibly my router thats just messed up? thanks in advance(also, when i finished typing this my internet shut down again, and I had to restart the computer multiple times and now im just plugged into the modem so i get a stable connection..) Message Edited by zechgroove on 10-17-2007 02:24 PM
Message Edited by zechgroove on 10-17-2007 02:36 PMaccess the router's web interface and try changing the MTU size to 1400 / 1300 .. check whether this makes any difference..
-
I have just returned from a business trip to China and my Macbook is not well. My internet connection is very slow and drops out intermittently. Is there a utility I can run which might clean it up.
Hello,
I have very similar problem. Suddenly Firefox stopped work - It was working few days after ver. 4 update. I was looking everywhere for some solution but nothing worked.
- uninstalled firewall - did not worked
- added full exception for Firefox into the firewall - did not worked
- Firefox reinstall - did not worked
- Firefox complete reinstall (registry included) - did not worked
- IPv6 diseabling - did not worked
- diferent proxy options (no proxy, system proxy, autodetect proxy) - did not worked
- new firefox profile - did not worked
- complete coockies, history... deleted - did not worked
- there is only one solution which partly works - I have used public proxy addresses for Firefox but the ping is (750ms), down/up (0.8MB/0.2MB originaly (10MB/2MB) and yes I have tried different proxy server from different countries from my included.
- IE is working perfectly and without proxy
- other companies browser - did not worked too
- only IE is working
- I have used three different malware, trojans, spyware, anti-virus programs and nothing
It seems to me as hopeless situation or very clever move from Microsoft, I am forced to use IE - at least this works
Any ideas, solutions?
System Windows 7, firewall Comodo Internet security
Thanks everyone for the help -
Problem description:
Computer very slow….and unresponsive
EtreCheck version: 2.1.8 (121)
Report generated April 16, 2015 at 10:19:42 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 7 days 18:4:45
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (299.54 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Western Digital My Passport 0748 500.07 GB
EFI (disk3s1) <not mounted> : 210 MB
My Passport (disk3s2) /Volumes/My Passport : 499.73 GB (126.16 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.quark.driver.Tether (1.1.0d4 - SDK 10.4) [Click for support]
[loaded] com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.gamed.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
6 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.coupons.coupond.plist [Click for support]
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[running] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[unknown] com.mcafee.ssm.ScanFactory.plist [Click for support]
[unknown] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.facebook.videochat.[redacted].plist [Click for support]
[failed] com.facebook.videochat.[redacted].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WDSecurityHelper UNKNOWN (missing value)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
WDDriveUtilityHelper UNKNOWN (missing value)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Internet Plug-ins: ℹ️
SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Stamps.com: Version: 1.1.13 [Click for support]
DISH Anywhere Player: Version: 2.7.2.0 [Click for support]
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 199.33 GB
Destinations:
My Passport [Local]
Total size: 499.73 GB
Total number of backups: 29
Oldest backup: 2013-05-17 22:06:43 +0000
Last backup: 2015-03-27 16:16:56 +0000
Size of backup disk: Too small
Backup size 499.73 GB < (Disk used 199.33 GB X 3)
Top Processes by CPU: ℹ️
6% backupd
5% WindowServer
1% Google Chrome
1% loginwindow
1% mtmd
Top Processes by Memory: ℹ️
289 MB Google Chrome Helper
189 MB Google Chrome
84 MB backupd
78 MB Mail
77 MB Finder
Virtual Memory Information: ℹ️
17 MB Free RAM
1.22 GB Active RAM
1.22 GB Inactive RAM
996 MB Wired RAM
54.55 GB Page-ins
1.93 GB Page-outs
Diagnostics Information: ℹ️
Apr 14, 2015, 03:11:54 PM /Library/Logs/DiagnosticReports/softwareupdated_2015-04-14-151154_[redacted].cp u_resource.diag [Click for details]When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
Time Capsule connection is very slow on windows 8
Time Capsule wireless connection is very slow on a Samsung windows 8 computer.
Any advice? It is placed next to my mac and the speed is 20% less (often more)
If I move the computer into the livingroom (about 10 meter) the speed is reduced with 95%.Windows 8 drivers are still developing.. download the drivers from the wireless manufacturer not Samsung and try it.
I am not surprised though at differences between wireless.. card using different chipsets and different antennas will give totally different results.
But you can help a bit.. setup the TC with SMB names.. short, no spaces, pure alphanumeric.
Set the name for 5ghz different to 2.4ghz so you can change over.
Set the security to WPA2 Personal which is the only one suitable for N wireless at home without a server.
Set 2.4ghz to manual radio channels and test, channel 1, 6, 11 in turn.
Try up close using 5ghz as it is faster.. but to get full speed you need a broadcom 450mbps card..
Remember wireless chipset like atheros and broadcom never quite see eye to eye.. it is one reason you buy the same brand.
Solution.. buy a cheap edimax wireless router.. plug it into the TC and use it for wap only.. I just did this for a friend.. works much better than TC or airport extreme on a PC. But I have not used win8 yet.. no idea if that is going to be problematic. -
Got a new EA4500 for X'mas
After setting up the new router I could only access youtube and google at a very slow speed, however I can not access anyother website - facebook, yahoo and etc...
it would ping yahoo and google no problem
friend told me to do a tracert some ip address and his conclusion was the router is fully functional
ISP uses PPPoE, Im sure that the username and password are correct.
upgraded to the latest firmware manually, and holy hell accessing the router with no internet access is a pain in the **bleep**!
Please help and Merry X'mastonup80 wrote:
I've made sure that both the EA4500 setting were the same as the WRT54G, did not solve the problem.
IP Address behind WRT54G is 192.168.1.103
behind modem is 202.151.XX.XX
It might be a DNS problem. Release & renew ip on the status page of your router. Just make sure you are already using the latest Linksys smart wifi firmware, reset the router & reconfigure. You can download the firmware here http://homesupport.cisco.com/en-us/support/routers/EA4500. -
POP3 mail servers locking up and very slow!
POP3 mail servers locking up and very slow! What is the deal with this? Verizon does not monitor these situations? Residential mail a low priority. Businesses run their own servers. Now we are back to having server issues again with Verizons Email? Last time mail was being delayed and now servers connect and lock up!
FWIW I am not experiencing any slowdowns or lockups on email. I Just checked two of my Verizon email accounts and no problem. But it is almost an hour since you posted so maybe Verizon fixed something?
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 -
Black&white picture and very slow working HP Truevision HD
Hello!
Few days ago my webcam start working only in black&white and very slow - it's like slide-show.
Problem in any program (Skype, windows camera, youcam...).
I tried re-install drivers and even OS - nothing helps.Hi @tcheshire ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY dv7-7255dx Notebook PC and issues with the WebCam in black and White and slow moving. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that might need updating.
When you look in the device manager do you notice anything with a yellow mark on it?
Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
Here is a document on how to troubleshoot and resolve issue with the Webcam.
Hope this helps you fix the WebCam.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
2.4GHZ clients very slow speeds with AP3600
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
Premiere Pro CC locking up and very slow to load bigger projects
I am having a problem with premirepro cc locking up and very slow to load bigger projects.
Windows 8 machineI am having the EXACT same issue and now we are WAY behind deadlines. We have Adobe for Teams on 3 computers, all are HPZ820, Dual Proc with Intel(R) Xeon(R) CPU E5-2650 @ 2.00GHz, 32 GB RAM, Dual Video Cards Quadro 6000 4GB, Windows 7 64 bit with all the latest patches. Everything worked on the first release of 2014 but last week there was an "update" to Premiere. Since this update, projects work for a short period. When you start a new project and add footage, you can scrub the footage and play the footage with no issue. But the more assets you add, simple Titles, it slowly starts to fail. Playing the timeline starts and stops and then finally the end result is you can't even play the timeline. The Program window is frozen. I have even tested starting a new project, adding assets one by one but no matter what, I get the same results.
-
Brother dcp115c printer prints at a very slow speed
after the installation of snow leopard, my printer prints at a very slow speed.
anyone got suggestions on how to improve? thanks alot
the driver version is correct.tonup80 wrote:
I've made sure that both the EA4500 setting were the same as the WRT54G, did not solve the problem.
IP Address behind WRT54G is 192.168.1.103
behind modem is 202.151.XX.XX
It might be a DNS problem. Release & renew ip on the status page of your router. Just make sure you are already using the latest Linksys smart wifi firmware, reset the router & reconfigure. You can download the firmware here http://homesupport.cisco.com/en-us/support/routers/EA4500. -
firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox
Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application -
I was found I pad Air is not that user friendly than I pad 4 even I pad 2, as I was a TaoBao (www.taobao.com) fans and every time when I get in their link, I pad Air cannot show all the pictures on the screen and very slow. It make me very disappointed about this. Could you please help to improve this. Thank you vey much!
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
Cd tray opening on boot up and very slow boot up, 5 mins plus
Hello, very new to Macs, only had this a few days. G4 800 mzh 1.5 gb ram running os 10.4. Cd tray opens on boot up and very slow boot up. Tried resetting pram and fsck. No joy with either.
Any help and advice much appreciated
Thanks
JonA warm welcome to Macdom & Apple's forums!
You may need to reinstall some things, or maybe even the whole OS.
How much free space is on the HD of what size?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Maybe you are looking for
-
Photoshop cs4 crashing when started
Can anyone advise. I am using photshop cs4, and when I open the app it crashes repeatedly. I dumped the pref file, ran disk repaim even an FSCK check. It still behaves the same, crashing once opened . Do I need to re-install, or is there another solu
-
Upload documents from transactional screen - Sale & Purchase Order
hi All, I am trying to have DMS attachment from trx - VA02 directly. I have come across few links which say - this is possible. upload documents from user transactional screen to content storage area | LinkedIn I am able to get the functionality for
-
Apple Studio 17" Display colors not right after thunderstorm
Noticed this afternoon, after a thunderstorm, that my 17" Apple Studio Display was not displaying colors correctly. All windows are reversed - white background is now black and text is white. Also photos look like 35mm negatives. My blue Apple standa
-
Crystal Reports 10 Program Error
Post Author: mattweinstein CA Forum: General I created a simple report that displays pictures (image datatype length 16) from a SQL 2000 database. The reports has no problem accessing the data and generating the pages. However, when I navigate betw
-
My MAC HD icon has disappeared from the desktop and finder sidebar, how do i get it back?