Problems connecting FTP from Cyberduck to my Wordpress site

***forewarning, please be direct and simple, I am a WP beginner and do not know much about computers
I am just trying to install a simple theme for my Wordpress site.
I know I need a FTP or SFTP client, so I decided to use Cyberduck. When I click "Open Connection" and put my blog URL as the sever, and my WP username and password it says "Network Error, Connection Failed. Connection Refused."
As I research this issue, I read that WP.COMs do not allow FTP access, which sounds ridiculous to me because I have seen hundreds of WP sites with modified themes. They recommend I switch to WP.ORG, but does that mean I have to change my URL? What do I need to do next to get the FTP info? How do I so to make this work? Step by step instructions please. I am so confused.
FYI: I registered/paid my domain under WP instead of GoDaddy.
I would like to stay with WP.COM bc it provides web hosting, unlimited database storage with redundancy and backups, etc. and with the .ORG you have to do all the manually and I have no idea what I am doing. I would like to find an easy way around it, and I am sure there is because everyone else uses WP.com and not their themes.
Everything is so f***ing complicated. HELP!

Similar Messages

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Why wont my netflix connect to HD TV through chromecast. No problem connecting youtube from apple mini ipad

My apple mini ipad will connect you tube to my HD TV through chromecast. Why won't my netflix on my mini ipad connect to my HD TV through chromecast?

Could you specify what brand, model, and ports the TV has?
Perhaps the maker of the digital TV has customer support.
Unless that's part of the issue, a general lack of it there, too.
However remote that may be, a few have a web page with
pictures of the back or end of their product with ports in view.
And/or a schematic of the kinds of gremlins they have inside.
Was your MB/Pro a certified Apple Store refurbished 'special deal' or bought at a retail store from existing stock that may have been an older model?
In either case, the ability to return the item has a limited duration from the date of purchase; unless there is a technical issue whereby they may choose to repair or replace a failed component or device. Perhaps someone with more experience with the device and adapters will offer their take on what to attempt next.
Sorry you've had so much trouble...
Good luck in any event.

Problems connecting sound from macbook - LCD TV

Hi all,
Im having issues connecting my macbook pro to my LG LCD telly. I have an HDMI connection working fine so the picture is sorted but I cant get the sound to work. I have tried a jack-jack cable and also a jack to red and white cable too, but neither work.
Any ideas? Im thinking maybe is it because the audio input on the TV does not link with the hdmi input?- I have tried all the different holes at the back of the telly so i'm running out of ideas. Any help much appreciated

If your TV has digital input try a Toslink cable ?
The stereo jack to red/white phono should work perfectly well though (I use the same thing alongside HDMI) sure it's in the right sockets ? (had to ask)
This device/cable combo will give you an audio signal to your HDMI cable:
http://kanexlive.com/products/item.aspx?id=3495

Problem connecting from Windows XP to 10.4.7 server.

I have an old G4 tower running as a server. I had OS Xserver 10.3.x running on a single disk in this machine. Everything worked fine.
I then inserted a mirrored disk pair in the machine and installed OS X server 10.4.7. The machine is set up as a standalone server.
When connecting from a Mac I can use both AFP and SMB to connect to the fileservices.
But when trying to connect to the fileservices using smb from Windows XP machines only a few of them can actually see the server in Network Neighbourhood. And none of them seems to be able to connect.
I can though ping the servers IP from the Window machines.
Do you have any Ideas that could help me solve this problem?
TIA
Hans

I also have a problem with people unable to connect via FTP from Windows.
My computer is set up as a Standalone Server. When I click the Windows button in Workgroup Manager for a user, the dialog says:
"Only a user with a password type 'Open Directory' may have a WIndows profile or home directory. You can change the user's password type on the Advanced tab."
But the Advanced tab only offers one password type: Shadow Password.
Note that this WAS working correctly for some time. I updated to Server 10.4.4 a while back. I don't think my single Windows user has accessed since the update. I'm trying add a new Windows user now and he can't connect because of this problem.
Please point me to a document to help me correctly configure this.

Problem connecting from Oracle to MS Excel - 64 bit

Hello,
I have problem connecting to excel from oracle 11.2 using DG4ODBC.
OS - Windows 7 - 64 bit
Database version :- Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit
Created System DSN using ODBC:
Data Source Name = test12
Oracle home Path :- D:\app\11g64db\product\11.2.0\dbhome_1
Content of initdg4odbc.ora file :
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = test12
HS_FDS_TRACE_LEVEL = 255
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
Content of listener.ora:
# listener.ora Network Configuration File: D:\app\11g64db\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = vis)
      (ORACLE_HOME = D:\app\11g64db\product\11.2.0\dbhome_1)
      (SID_NAME = vis)
    (SID_DESC =
      (PROGRAM = dg4odbc)
      (SID_NAME = dg4odbc)
      (ORACLE_HOME = D:\app\11g64db\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = D:\app\11g64db
Content of tnsnames.ora:
# tnsnames.ora Network Configuration File: D:\app\11g64db\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
excel_test =
   (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
    (CONNECT_DATA=(SID=dg4odbc))
    (HS=OK)
VIS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = vis)
Listener status
LSNRCTL for 64-bit Windows: Version 11.2.0.4.0 - Production on 29-AUG-2014 13:56
:11
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.4.0 - Produ
ction
Start Date                29-AUG-2014 13:34:58
Uptime                    0 days 0 hr. 21 min. 12 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   D:\app\11g64db\product\11.2.0\dbhome_1\network\admin\l
istener.ora
Listener Log File         D:\app\11g64db\diag\tnslsnr\Est-Subramanya\listener\al
ert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "dg4odbc" has 1 instance(s).
Instance "dg4odbc", status UNKNOWN, has 1 handler(s) for this service...
Service "vis" has 2 instance(s).
Instance "vis", status UNKNOWN, has 1 handler(s) for this service...
Instance "vis", status READY, has 1 handler(s) for this service...
Service "visXDB" has 1 instance(s).
Instance "vis", status READY, has 1 handler(s) for this service...
The command completed successfully
DB Link:
CREATE PUBLIC DATABASE LINK TEST123 USING 'excel_test';
error while querying the data:
select * from test@test123;
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from TEST123
28500. 00000 - "connection from ORACLE to a non-Oracle system returned this message:"
*Cause:    The cause is explained in the forwarded message.
*Action:   See the non-Oracle system's documentation of the forwarded
           message.
Error at Line: 1 Column: 20
Appreciate the help in advance............
Thanks...

Also HS log file showed error.. Below are the contents of the trace file:
Oracle Corporation --- FRIDAY    AUG 29 2014 14:01:06.212
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- FRIDAY    AUG 29 2014 14:01:06.211
    Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "dg4odbc"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.4.0_0019, Instance:dg4odbc
Exiting hgogprd, rc=0
hostmstr: 8795961769984: HOA After hoagprd
hostmstr: 8795961769984: HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=873
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=112000
Entered hgolofn at 2014/08/29-14:01:06
Exiting hgolofn, rc=0 at 2014/08/29-14:01:06
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 64 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/08/29-14:01:06
hostmstr: 8795961769984: HOA After hoainit
hostmstr: 8795961769984: HOA Before hoalgon
Entered hgolgon at 2014/08/29-14:01:06
reco:0, name:OPTIM, tflag:0
Entered hgosuec at 2014/08/29-14:01:06
Exiting hgosuec, rc=0 at 2014/08/29-14:01:06
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using OPTIM as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/08/29-14:01:06
HS_FDS_CONNECT_INFO = "test12"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/08/29-14:01:06
dsn:test12, name:OPTIM
optn:
Entered hgocip at 2014/08/29-14:01:06
dsn:test12
Exiting hgocip, rc=0 at 2014/08/29-14:01:06
##>Connect Parameters (len=31)<##
## DSN=test12;
#! UID=OPTIM;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2014/08/29-14:01:06
Entered hgopoer at 2014/08/29-14:01:06
SQLGetDiagRec returns rc=100 (SQL_NO_DATA) for handle 4619630 (SQL_HANDLE_DBC)
Exiting hgopoer, rc=0 at 2014/08/29-14:01:06 with error ptr FILE:hgopoer.c LINE:186 ID:GetDiagRec error
hgocont, line 2831: calling SqlDriverConnect got sqlstate
Exiting hgocont, rc=28500 at 2014/08/29-14:01:06 with error ptr FILE:hgocont.c LINE:2851 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2014/08/29-14:01:06 with error ptr FILE:hgolgon.c LINE:806 ID:Calling hgocont
hostmstr: 8795908591616: HOA After hoalgon
RPC Calling nscontrol(0), rc=0
hostmstr: 8795908591616: RPC Before Exit Agent
hostmstr: 8795908591616: HOA Before hoaexit
Entered hgoexit at 2014/08/29-14:01:06
Exiting hgoexit, rc=0
hostmstr: 8795911442432: HOA After hoaexit
hostmstr: 8795911442432: RPC After Exit Agent

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Problems connecting to Monitor after waking up MacBook from sleep

Hi,
I am experiencing a lot of problems connecting my macbook pro to external monitor once I put it to sleep. I have tried every options like setting up PRAM and all, but it just wont work. Sometimes the restart works and sometimes it wont. I am using a Samsung monitor. I have no idea what to do, as I keep on clicking Detect displays and it just wont do anything. Can anybody please help me as to how I can wake up my macbook from sleep and get it connected to the monitor. I have a mac keyboard and bluetooth mouse, but neither would wake the mac. I have change my bluetooth settings so that the mouse should be able to wake it up..

William Rivas wrote:
William Rivas wrote:
William Rivas wrote:
Linc Davis wrote:
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.
Updating to 10.9.2 did the trick. So I thought. Does anyone have a solution?
Thanks!

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

The message ~There was a problem connecting to the server "your-447023ae6b".appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!

The message ~There was a problem connecting to the server “your-447023ae6b”.appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!

Hi
Thanks this has helped me solve the problem.
I used the Outlook Anywhere connectivity tester you suggested. Selected Outlook autodiscover.
It told me that it could not resolve things on any of the 4 tests.
I saw that using the last test "Attempting to contact the Autodiscover service using the DNS SRV redirect method", was the only one likely to work in my case.
I had already changed 3 entries in dns to point at my DDNS address but this had not worked, from the errors I could see that it was just the certificate name not matching so I changed the DNS entries for Autodiscover, autoconfig and _autodiscover._tcp
to be webmail.domain.com which is a CNAME to my ddns address for the broadband router, which in turn forwards ports 80 and 443 to the exchange server for owa and activesync access. I got an error message saying that I had an illegal entry in my SRV record
as a CNAME is not allowed, but it saved the change anyway.
I reran the test and it worked.I can now make new outlook clients attach teo exchange.
Thank you, after 8 hours yesterday of trying to reolve this I suddnely got it to work on one laptop but the other still would not and had lost track of what I could have changed so had no idea what actually made it work.
Thank you for your suggestion.

Cannot connect to the internet from my MAC on WRT160Nv2 - no problems connecting from my PC

Hi,
I have just bought a WRT160Nv2, but I am having problems connecting to the internet from my MAC (a powerbook with OS X) when I connect to the router wirelessly. If I try from my PC the Internet works fine. Also if I connect the MAC directly to the routers LAN port, the Internet works.
When I connect wirelessly from the MAC I do get an IP adress, and I am able to access the routers web configuration page. I can also see that the correct DNS gets assigned, so I am low on suggestions to what could be the problem.
Currently I have the router set up to WPA2 encryption, but I have tried different settings, e.g. no security at all with the same result.
I just tried upgrading to the newest firmware (WRT160Nv2_v2.0.02_008), also with no luck.
Also I should mention that the MAC can connect to other wireless connections without problems, e.g. my previous ZyXel DSL router.
Any ideas to what could be the problem?
Thanks,
Rasmus

Well maybe WPA2 Security is not compatible with Mac so change the Security mode to WEP or WPA and prepare security key of 10 digit password and while connecting to the wireless network on Mac type a $ sign first followed by the 10 digit passoword and it should work.

Serious problem connecting from handset - Help!!!!!

Hi all,
I�ve developed an J2ME App. wich communicates with a remote web site (Tomcat server with Apache & MySQL server). The App. client side consist basically of a MIDlet wich handles the UI navigation & an support class wich do the real work calling the Servlet servicess and passing parameters to it. The Servlet queryes de MySQL DB. and return data to de client wich are showed in lists, forms, etc.
My system works fine using the java WTK22, accessing the web site via internet but, when I try with my real "Sony Ericsson - K300a", nothig happens (no errors and data = 'null').
Trying to capture errors, I can see that, when the execution is from the WTK22 the Servlet receives the input parameters and works fine. On the other hand, when I try from de K300a the Server log doen�t show nothig so, I suspect that the problem source is a connection problem.
I�m not posting code here because the good WTK22 execution but, if somebody need it, I�ll post it also.
Please, help me with this problem. A real proyect depends on it!!!!
A lot of thaks in advance.

Hi printisor,
1)Finally I installed SonyEricsson emulator and ran my app.. Same problem (app. run fine from emulator but not from handset).
2)Here I send code related with the connection aspect. Sorry by the length but is the minimun I can paste in order to be clear:
     * loadData:
     *      1)Construct String message depending on a received RecordStore.
     *     2)Obtains Connection & Data from Servlet.
     * NOTE: messages himself are: (public static final int MSJE_...... = 1) + �^�; etc
     public void loadData(RecordStore rStor){
     //// Here discriminates message value ////
     try{
          String message = null;
          if(rStor == recStorCereales){
     message = CttesMensaje.MSJE_CARGAR_CEREALES + "^";
          } else {if(rStor == recStorAcciones){
                 message = CttesMensaje.MSJE_CARGAR_ACCIONES + "^";
               } else {if(rStor == recStorTitulos){
                           message = CttesMensaje.MSJE_CARGAR_TITULOS + "^";
                    } else {if(rStor == recStorDivisas){
                                message = CttesMensaje.MSJE_CARGAR_DIVISAS + "^";
     //// Here obtains Connection & Data     ////
          HttpConnection conn = null;
          DataInputStream in = null;
     String urlServlet = http://www.nasinibursatil.com.ar/rnasini/servlet/ServletNSN";
          conn = open(urlServlet, message);
          in = conn.openDataInputStream();
          String losRegs = in.readUTF();
          close(conn, in);
     } catch (Exception e) {}
     * open(String url, String mensaje) does the real work
     static HttpConnection open(String url, String strMens)
     throws IOException, ExcepcionAplicacion
          HttpConnection conn = open(url); // see the following method
          conn.setRequestMethod(HttpConnection.POST);
          DataOutputStream dos = null;
          strMens = strMens + '\n';
          try {
          dos = conn.openDataOutputStream();
          dos.write(strMens.getBytes());
          } finally {
          if (dos != null) {
               dos.close();
/// Reports an error if any ///
     if (conn.getResponseCode() == HttpConnection.HTTP_INTERNAL_ERROR){
     String razon = conn.getHeaderField("Reason-Phrase");
     if (razon == null) {
          razon = "Server Error";
     throw new ExcepcionAplicacion(Integer.parseInt(razon));
     checkCodigoRta(conn);
     return conn;
     * open(String url): open a connection to a URL, using a "Connector",
     * put some properties and returns a HttpConnection Object
     static HttpConnection open(String url)
               throws IOException {
          HttpConnection conn = (HttpConnection) Connector.open(url);
          conn.setRequestProperty("User-Agent", System.getProperty("microedition.profiles"));
     return conn;
     * Obtains the RC and throws an error if isn�t HTTP_OK(200).
     static void checkCodigoRta(HttpConnection conn) throws IOException {
     int codigo = conn.getResponseCode();
          if (codigo != HttpConnection.HTTP_OK) {
          throw new IOException(codigo + "; " + conn.getResponseMessage());
     *      Close Connection & Streams.
     static void close(HttpConnection conn, InputStream in) {
          try{
               if (in != null) {
                    in.close();
               if (conn != null) {
                    conn.close();
          } catch (IOException ioe) {
               System.out.println("Error: " + ioe);
3) Going back to your previous questions about my connection modes (wap, http, etc) let me tell you that I�m not sure now wath I�m doing. The mater is that I live in Argentina and there are only three providers here.
Today I was speaking with a provider representative (from PERSONAL) and he say me that the only mode that the three providers works here is using WAP/GPRS. I cannot beleave it!!!!. If so, It could be a desaster for me(and for J2ME here,also).
I was searching the forums trying to find this kind of things and really there are a lor of people having problems like this. Some of them were resolved and the sollution was to put some settings in the phone such as "APN Settings" to bypass WAP mode. Now, my questions are:
�May be it a sollution?
�Is it possible to do it?
�Some example?
Lot of THANKS.
BlufsteinEJ.
[email protected]

Problem to connect database from Developer 6i

I have downloaded Developer 6i from oracle.com
before that, I have already downloaded 9i database default_home directory is c:\orant.
while i was installing develper 6i it was installed with forms_home, c:\orant\forms.
I was using the forms builder to design forms but while i was trying to connect to database it is saying that "Unable to Connect to Destination"
i was using scott/tiger.
this time i have tried scott/tiger@rkmurari...(rkmurari is SID and Database name).
Can anybody help me in solving this problem..
Thank you very much..

I have a problem to connect database from developer 6i

Problems connecting with database from java API

I've benn using XSQLRequest and I found a problem with
connections, because it can't connect from Java to database, but
if I access to a .xsql it works.
And also if I link to a .xsql first and after that I try to
access to Database form my servlet it works. So I think my
problem is to initialize the XSQLConfig.xml file in OC4J server.
Thanks in advance

Would you provide the way you deploy your XSQL app to OC4J and
how you get JDBC connection using JAVA? I execute the next code more or less:
miXSQLRequest = new XSQLRequest(XSQLQuery.getDOM
(),null);
miXSQLRequest.process(htParamsIn, pWriter, pErrors);
but and it's probabily my mistake I don't get any conecction
from the session or something similar because I thought that
it's made by XSQLRequest, and the XSQLRequest class takes the
default values of the connection pool from the file
XSQLConfig.xml (I put this file inside the lib directory of
OC4J) as the XSQLServlet.
Thanks for your help

Problem Connecting to Internet after recent Software Updates from Apple

I have an old iMac 15" flat panel, running OS X 10.3.9, just ran the Software Update an hour ago. Now my computer won't connect to my wireless network via the Airport. I tried to open the Internet Connect apps from Apple and it won't even load, it has this swirling beachball has been on for 15 minutes and it says "Loading Internet Connect..."
Anybody experience something like this! Could this be another Apple blunder with their software update?
I tried, restart, remove the plist of Internet Connect, all those did not help!
Please help. Thanks

Try resetting Airport as per this article;
Resetting AirPort Express
By the way, if your problem has not been solved then leave it as unanswered until such time it is, as you will get more responses.
regards roam

Problems connecting FTP from Cyberduck to my Wordpress site

Similar Messages

Maybe you are looking for