Problems connecting MBP to TV

I am connecting my MBP to my LG lcd tv via the mini display to VGA cable. the connection and everything works fine. but when i try to watch a movie or tv show on itunes, it will not play on the tv. even if i start out with the itunes window on my mac screen, start playing the movie, then drag it over to the tv screen, as soon as the itunes window reaches the screen, it will stop playing. i know the cable is good, i run sound and lights at my church and i have it connected to our projector every week with no problems and i can play movies and everything, but for some reason it wont work on my tv, anybody know how to fix this?

Dont know about VGI cable but
I know some people when using HDMI cable forget this
Plug it in first switch on TV, so Macbook will reconise it. In System Preferences,Display etc
then select Arrangement, then tick mirror display. then go back and go into Sound, select Output and tick HDMI cable.? This will get your icons onto your TV and Sound

Similar Messages

  • Problem connecting MBP to established Linksys wireless network

    just got MBP 2.16 (my first mac!). Having trouble connecting to my established linksys wireless network. I have the BEFW11S4 (V.2) etherfast wireless access point + cable router with 4 port switch. Currently have 128 encryption enabled. The linksys router is broadcasting its ID (I can see "linksys" on my mac) but it seems to not accept the password. I tried entering the 26 WEP key, the passphrase, the WEP key in quotes, the WEP after a $ sign... all to no avail. please APPLE community, help out a mac noobie before i have to turn back to Bill Gates....
    Dell Dimension 8200, MBP 2.16   Mac OS X (10.4.6)   2 GB SDRAM

    To find the IP address or the status, go to system Preferences then network. It will show you the status of any internet connections. You should see one for Airport, it will either show a green light and say 'Airport is connected to the internet' (or something like that) or a red light and say 'Airport is is active but not connected' (something like that). If you double click on Airport or click 'Configure' you will see tabs, click on TCP/IP and it will show all of your details including your IP address.
    As for the other, it always refers to wireless networks as 'Airport' and that response is the standard response from a Mac.
    the password should be typed in the hex section, not sure about the $ sign. I've never had to do that before. But if you can't connect even with no encription then I would think it is another problem. I would turn off the encription until you can at least get connected and then you can worry about the security afterwards.

  • Problem connecting MBP to established Linksys wireless network (Part 2)

    Thanks to all who followed part 1 thread. I have been trying to wirelessly connect my new MBP 2.16 to my established linksys BEFWS11S4 network. I gave up on 128 encryption for now, MBP couldn't take it.
    by playing with the setting and manual config I can get the MBP to connect to the linksys network, (I even see the mac on my Win XP's DHCP master table). In the network utilities I get a green status light. when i run diagnostics i get a green airport, airport settings, network settings and ISP. STill red are "internet" and "server". no conncetion with safari...
    I know the MBP works becuase i was able to connect to my neigbors wireless network and will work when I hard wire it through built-in ethernet.
    Anyone know why the airport wouldn't work here? any thoughts appreciated I have spent way to many hours on this......
    Dell Dimension 8200    
    Dell Dimension 8200    

    OK so your router is issuing IP addresses. However, I would say there is definately something wrong with your router's config. Maybe your DHCP server on your router is switched off? Anyway by adding your own IP address that is half the battle, as you need more than an IP address to connect to the internet, that's why you can see it in the list but cannot connect to the net. When a computer is set to DHCP it sends out a message to any DHCP servers requesting an IP address, if it gets no response in a set time, it issues itself an address, like yours is doing, the address will probably look like this: 169.254.14.192, it's called an APIPA address (Automatic Private IP Addressing)
    You see a router uses a NAT (network address translation) so that from the internet all the machines connected to your router would show the same IP address which would be the one supplied by your ISP. For this to work, each machine on your network needs to have a default gateway, which is the IP address that your outbound traffic goes to. If your router is not issuing an IP address then it's probable that it's not issuing this data also, so you can add it yourself.
    On your windows machine, go to a command prompt Start>Run type cmd and press enter, then type ipconfig /all press enter, it will show you the IP address of your PC, your subnet mask and your default gateway. I am going to assume that your IP address is in the 192 range as most Linksys are. So let's say your IP address of your router is 192.168.1.1 (on the new ones they tend to go with 192.168.1.15) so whichever yours is, that is your default gateway, as that's the address of your router. So your PC may have 192.168.1.100 as it's IP address.
    On your Mac go to the System preferences>Network and the TCP/IP tab and select manual setup in Airport. Type in an IP address like 192.168.1.101 (or one up from your PCs IP address, then type in the subnet mask 255.255.255.0 if that is the same as your PC and then where it says Router (this is the default gateway address on a Mac), type in the default gateway here. Select apply and that should now connect to the internet.
    I would only use this until you can resolve your Router's issue. Maybe you can call them back and tell them your router is not issing IP addresses. Or get a friend to try his laptop and see if he gets one. If not then you know it's your router. I would bet money that it's your router, that's why you can connect to your neighbours but not yours. Also remember if you keep the manual setup if you go travelling, remember to change it back to DHCP or you wont be able to pick up any hotspots. You can save a TCP/IP setup on a Mac so you could save the setup and name it and when you go travelling change to default, or auto.
    Let me know how you get on.
    P/book Aluminium 1.25ghz   Mac OS X (10.4.6)   (MBP 2.16 120GB 1GB Wk23 on order!)

  • Problem connecting MBP 17" to 37" LCD Philips

    Hi all,
    I recently bought a new Philips flat TV LCD model, the top-range for their 37 inches production (3ms panel, one of the fastest).
    This tv has 3 HDMI connections , and should support PC connections (it's a full hd , with support for 1080p connections).
    2 days ago I bought an HDMI-DVI male cable, and tried connecting my MBP 17" (2.16GHz) to the tv.
    I wasn't able to let my Mac detect the lcd tv. I tried switching all the resolutions, then pressing Detect Display button, or switching channel back and forth on my tv to let the HDMI connection be engaged.
    What I obtained was only a temporary blue screen on my Mac when I switched channel on the TV.
    The TV manual explicitly says that it supports DVI connections from a PC. They must be at 60Hz refresh rate.
    Anyone who can help me with any suggestion?
    Thanks in advance

    If I were you I would check the TV's plug-and-display driver for clues. This requires downloading and installing SwitchRes X (I recommend the Control Panel version over the full version because the full version requires a helper application to be installed). Once SRX is installed, with the TV hooked up to it, click on the "Export DDC" button. This will create a text file from the driver data inside the TV. Post it here and I'll help you interpret it.

  • Resolution Problem Connecting MBP to Envision Television

    Hello, I am using a MacBook Pro 15" 2.16 Intel Core Duo with 2 gigs of RAM and an ATI Radeon X1600 256 MB RAM graphics card and I am connecting it to an Envision 19" L19W698 Television via a HDMI to DVI cable and I am not getting the supported 1440x900 resolution. Heres the thing, I first connected the display via a VGA to VGA/DVI converter to the MBP and it supported a 1440x900 resolution and the picture quality was great, so I thought I would simplify things a little and got a HDMI to DVI cable since the TV supported HDMI. I set it up and the supported resolutions are:
    640x480
    720x480
    800x600
    1024x768
    1280x720
    1440x240
    1920x540
    With the automatic resolution set to 1024x768 at 60 hertz. I change the refresh rate and nothing happens, I tried putting the display pref in the menubar because I read that sometimes helps, I restart, reconnect, log out, etc... and the resolutions do not change. My question, is this an issue with the second display, with the cable or with the MBP and is there anything I can do about it? Thank you.
    Dan

    Welcome to Apple Discussions, dsp2222.
    I'm guessing the TV doesn't support a native resolution input over HDMI. That's not as unusual as you might imagine on lower end TVs. Does the Envision user manual say anything about making computer connections? Does it say it works over HDMI?
    Often HDMI is dedicated to devices that output standard video formats of which 1440 x 900 is not. That's a long way of saying you are probably stuck with the VGA connection.

  • Problem connecting MBP to HDTV

    I ordered a DVI to HDMI cable and hooked it up to the my Toshiba HDTV and I get a picture, unfortunately it's not what I'm looking at on the MBP. Strangely it is the blue design that is the desktop background when you pull the MBP out of the box and it does not change if I open up programs, etc.
    What do I need to do to get my MBP screen to show up on the TV?
    Thanks!

    you may have your screen in extended desktop mode, so the HDTV is just a second display that allows you more desktop space, that's why it's not showing a duplicate of what you see on its display. if you move the mouse pointer, you should see it goes over on to the HDTV and you can drag windows there etc.
    if you want to change it to desktop mirroring, you should be able to do so in the displays pane in preferences. that way, both displays will show the same thing.

  • Problem connecting bluetooth headset with New MacBook Pro and OS 10.10. MBP did not recognise the headset (Platonic BeatBack Go2)

    I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

    I have been using Plantronic bluetooth head set (BackBeat GO2 produced by Platonic) without any problem with my old Macbook under OS 10.6.8. When I bought a new Macbook Pro Retina (MBP) loaded with OS 10.10 and a MacAir (MA) also loaded with OS 10.10, I have problem connecting the head set. Both MBP and MA could not recognise the head set. Can some one help ..... I can't do without the bluetooth head set...

  • Xp networking problems on mbp c2d

    i don't know if this problem should be addressed under the mbp forum or boot camp forum so i'll post in both to get the most input.
    i'm having a problem connecting to my home wireless network under bootcamp. i installed xp sp2 as well as the driver cd. when i try to connect to my router it takes a long time detecting the network type. then it pops up a window that says "windows is unable to connect to the selected network. the network may no longer be in range. please refresh the list of available networks, and try again." when i connect to another network in range (that has 0 bars) it quickly detects the network type and gives a window where i can enter the wpa password (which i don't have).
    the mbp connects fine under os x. my mac mini along w/ a few windows computers in the house have no problems either.
    our router is a 2wire that has wep encryption. the ssid is broadcast and found by windows.
    any help would be great. this is driving me nuts!!!

    That behavior is normal. Intel's chips use a technology called (I believe) "SpeedStep", which dynamically adjusts the processor speed as is needed. This improves battery life and has no impact on performance.
    With respect to quitting the battery, I assume you mean to remove it... This will, in fact, freeze the processors at a max of 1GHz, which is a safety feature.
    A quick review of these forums would have revealed that, btw.
    Thanks for trolling, though!

  • There was a problem connecting to the server "Max Time Capsule"

    Disclaimer:  Previously posted here (Ask Different) and similar to this.
    I'm trying to use my MBP inside and outside my office, and having it backup to my 2TB Time Capsule when on its wireless network, or defer backups when not on the Time Capsule's wireless network.
    Unfortunately, if I've been on a different wireless network for a few hours worth of backup attempts, bringing the machine back onto the Time Capsule's wireless network doesn't resume backups, and Time Machine never recovers. I can select the disk as a backup drive in the Time Machine preferences, but the disk remains unavailable from the Finder, and any backup attempts yield the standard:
    There was a problem connecting to the server "Max Time Capsule"
    Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.
    My WiFi connection is through the same Time Capsule that hosts the backup drive, and its name and IP address have decidedly not changed. The only thing that seems to help is restarting the Time Capsule, but that is an inconvenient workaround at best.
    The problem sounds similar to Backup Disk Not Available, but the answers to that question are either to restart or change the disk name or turn off the 5 GHz network (which didn't help). I also looked at /Library/Preferences/com.apple.TimeCapsule.plist, but found nothing that seemed relevant.
    Any suggestions would be greatly appreciated. My MBP is running OS X 10.7.5, and the Time Capsule firmware is 7.6.1.

    There was a problem connecting to the server "Airport Time Capsule".
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    I still have internet connection, and have tried other suggestions across internet but really the only fix has been to power cycle the ATC. This unfortunately is only a temporary remedy for a day or so until it returns.
    Any suggestions on how to fix this problem?
    There is no fix.. I have written a bunch of suggestions to try.
    https://discussions.apple.com/thread/6106750?tstart=0
    It is very common on Mavericks.
    How long did it take from when you set it  up till it went bad??

  • Connecting mbp 15 inches intel 2.53ghz to 40 inches full hd samsung lcd

    hiii i want to connect my connecting mbp 15 inches intel 2.53ghz to 40 inches full hd samsung lcd
    which wire or what peripherals i have to buy

    i got exactly the same problem. i have a samsung le32c530 lcd, but sometimes works sometimes not. when i plugged the first time mac to the lcd everything worked. this problem appeared when the mac went to sleep mode.
    after trying everything i put this working honestly i dont know what i made, but now the same happened and i cant solve this...
    anyone can help us?
    i use a macbookpro late 2009, with a dvi-hdmi cable.
    Message was edited by: elioc9

  • We are on holiday in Mexico. Our iPad has no problem connecting to the Internet through a subscription WiFi network. But, both of our laptops can not with the same password. What can we try?

    We are on holiday in Mexico. Our iPad2 has no problem connecting to the Internet through our hotel's subscription WiFi network. But, both of our macbookpros can not with the same password. What can we try?
    We can join the network, but can not access the Internet. The password is correct. We have tried network assistant and diagnostics, restarting the laptops, re-joining the network. Our iPhone 4s also works all the time.
    Same location. Signal strength is good.

    Since I couldn't figure out a way to edit our original post, here's another potential clue.
    Our laptops, when in System Preferences>Network, say "WiFi has the self-assigned IP address of XXXXXXXXX and will not be able to connect to the Internet".
    Strangely, my six year old MBP running OS 10.6.8 accessed the Internet straight away, just by opening Safari to my home page. My wife's six month old MBP running OS 10.7.2 could not.

  • "Invalid password" intermittent problem with MBP Snow Leopard Netgear

    This is driving me mad, please help.
    My MacbookPro (new, Sept '10, Snow Leopard) has intermittent connection problems with my Netgear wireless-N 300 router. Everything works fine a lot of the time. I put the computer to sleep, and next time I open it, I bite my nails to see if it will connect or not. Today, it's not. And there's no logical reason why. What's maddening is that I get an Airport "Invalid Password" error when trying to connect, when I'm using the right password and it has connected automatically before. I will sometimes have success by restarting the computer, or by restarting the computer AND the modem, or by resetting the modem. But sometimes I don't have that success, and today is one of those days.
    Now, I also have an older Macbook Pro (Mar '08, Leopard) that NEVER has a problem connecting. So I know it's a Snow Leopard issue.
    I have tried changing the channel in the router's wireless settings (including to Auto). I have tried deleting the keychain item for the router's wireless. I still get the "Invalid Password" error.
    The irony is that the whole time, I'm updating the router via the old MBP which has no problems with ANY of the settings. That's what I'm writing this on. But I need the other computer to get online. It's getting ridiculous.
    I CAN connect by connecting an Ethernet cable to the router, but that kind of defeats the purpose of going wireless.
    Please help. Any suggestions are greatly appreciated.

    First log into your router and make sure it is up to the current time and maybe sync it to a Time Server. Then on your Mac open System Preferences->Network. At the top of the pane is the "Location" drop-down. Use that drop-down to make a new custom Location calling it whatever you like. Then at the bottom Network pane click on the 'Apply' button to save this new custom Location you made. Then use the Network pane to rejoin your wireless network.
    Also in System preferences->Date & time and make sure it is set to your current living Location. Plus open /Applications/Utilities/Keychain Access. In this program first click on the menu item "Keychain Access" and select "Keychain First Aid". Then go to the entry for you wireless network and delete it. Then the wireless connection should ask you again to save the password, only once, hopefully.
    Good Luck.

  • I'm trying to set up my Ipod, but when I go to sign in with an apple ID it says 'Could not sign in: there was a problem connecting to the server'.

    I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?

    I also encountered the same problem. Try using a different email address or try signing in later.

  • I am having problems connecting to home wifi.  It was working, but now all I get is a blank white screen.  I re-booted with no success.

    I am having problems connecting to home wifi.  It was working, but now all I get is a blank white screen.  I re-booted with no success.

    Hi, blank white screen where exactly?
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Problems connecting multiple macs to an Airport Extreme network.

    I think this problem is similar to a previous post, but is individual in some ways.
    I have 2 Airport Extreme basestations covering a large flat connected by Ethernet extending a single network. I did try to extend the network wirelessly, but this was plagued with problems where the network would work for 10 mins, then drop out as I think the basestations are slightly too far apart.
    Connected to the network are a number of machines:
    Wirelessly we have 3x iPhones, 1x G4 Cube, 1x iMac (current model), 2x MacBook Pro (previous model) & 1x PC.
    Wired via a hub is an Apple TV, PS3, Nintendo Wii, Denon Home Cinema Amp, PS2
    For aprox 6 months I have had major problems connecting all the wireless machines at the same time. I have played around with the security as per previous posts with varying degrees of success.
    I seem to have the most problems with the iMac. The iMac will not join the network when there is any form of wireless security. Every time I try to set up a password it hangs when trying to join and I finally get the "There was a error joining xxxx network".
    After more playing around I managed to get all the machines working by having no security on the network and locking the network down by MAC addresses.
    Since last Thursday I now have a new problem. The iMac joins and stays on the network perfectly, but the second my second MacBook Pro is switched on and joins the network, the internet connection on the iMac drops out. In addition, as we use the iMac as a media server, all other machines connected to the iMac for either file sharing or iTunes sharing then get the error "the remote machine is failing to respond. Please check firewall settings if there are any". What is strange is that the iMac remains on the network, full signal, independent IP address and the second the MacBook Pro is switched off, works perfectly again.
    I have tried wiping both the iMac & the MacBook Pro and re-installing their operating systems, but this only solves the problem for aprox 24 hours then all of a sudden the issue re-appears.
    Can anyone out there help?

    Let's double-check the AirPort Express Base Station's (AX) settings ...
    Perform a "factory default" reset of the AX
    o (ref: http://docs.info.apple.com/article.html?artnum=108044)
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, check the following settings:
    AirPort > Base Station
    o Base Station Name: <rename or leave default>
    o Base Station Password: <enter desired password>
    o Verify Password: <re-enter desired password>
    o Remember this password in my keychain: (optional)
    o Set time automatically: (unchecked)
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing AEBSn's wireless network>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

Maybe you are looking for