Problems connecting to Exchange - can anyone help?...

I'm trying to connect a Nokia N900 to our Exchange 2007 server.
I've copied and installed our self signed certificate to the phone.
After entering the details of our exchange server it attempts to connect but I keep getting the following error:
"Either exchange server requires a secure connection or your account it disabled"
All of our other devices (iphones, blackberries) work fine with the exact same settings.
This seems like a common issue - one that Nokia are unable to help with.
Can anyone help me?

Good luck. Odds are very strong that something is cooked and the phone will have to be replaced. Drying it out with rice may work, but that's almost always a temporary solution. The corrosion has already begun and sooner or later, it will fail completely. Hopefully, it will wait until after you're eligible for an upgrade again.

Similar Messages

Have updated phone to ios 5 now i cannot connect to safari can anyone help pls

I have updated phone to ios 5 now i cannot connect to safari can anyone help pls

The same thing is happening with my wife's iPhone 4 and we can't figure it out. When placing a call, the screen freezes and she needs to restart the entire phone.
She upgraded to 5.01 this morning over the air while it was plugged in. Immediately afterwards, this problem started happening. We've tried restarting the phone several times and plugged in to iTunes but there's nothing she can do do to fix it.
Any help is greatly appreciated!

I am using Ringtone maker from Blackout labs, I made a ringtone and it did go into my tones and it won't upload to my phone. I have done this several times and never had any problems til now. Can anyone help me on this?

I made a ringtone and it did go into my tones and it won't upload to my phone. I have done this several times and never had any problems til now. Can anyone help me on this?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I'm having problems installing my printer, can anyone help ?

Hello there, i've installed a Canon MP 560 onto my Macbook, by mistake i installed it onto my wives user page ( I am relatively new to all this ). I need to install it on my user page, as i need for work. Can anyone help me move it ? Thank you.

Leanneh,
You may try a chat, the first one is for CC/CC2014, the others are for older versions:
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-c1.html
And Adobe phone Support, is only for CC/CC2014:
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

My search bar for my library no longer works. Also, the menu bar is no longer visible. Noticed this problem last Saturday. Can anyone help me with this?

My search bar for my iTunes library no longer works. Also, the menu bar is no longer visible. Noticed this problem last Saturday. This might be an issue with my desktop, and not iTunes itself Can anyone help me with this?

Press Ctrl-B to toggle the menu bar on and off.
When you say that the "search bar for my iTunes library no longer works" can you be more specific? The operation of the search function has changed in iTunes 12, essentially having two very distinct modes:
when Search Entire Library is checked, entering a search string will generate a dropdown of all matching items within your whole library, from which multiple operations are available via context menus
when Search Entire Library is unchecked, entering a search string creates a filtered view of whatever your current focus is (e.g., if you're looking at a playlist the filter applies only to items in that playlist) with none of the dropdown options as in the first case

Is everybody having problems with Canoscan drivers-can anyone help, please?

After starting with Leopard, my LIDE25 refuses to work, and the window from the toolbox tells me a driver cannot be found, even after redownloading the driver, which, according to the Canon website, is perfectly compatible with the LIDE25 driver. Someone is not being honest, or Apple has made a huge mistake in the bug department. My smart mailboxes don't work either.Can anyone help? I see there are others with Canon scanner driver problems on this forum - what can we do? I'm so tired of fragile scanners breaking down and needing replacement - they are like VCRs in this respect, somehow a crap technology - but this time it's surely not the scanner to blame.

I have a Conoscan 8400F scanner, and after downloading the latest driver it actually works BETTER than it ever has... used to take almost 3 minutes to scan a 8.5 X 11 page, now less than a minute.
Jeff

Since downloading the new iOS 6 update I am unable to connect to wifi can anyone help?

Can anyone help, I've been unable to connect to my wifi or any other wifi since downloading the iOS 6 update

Look to your right under More Like This --->

When I enter Yahoo.ca, I lose my internet connection(safari). Can anyone help me with this. Thanks.

When I enter Yahoo.ca, I lose my internet connection. This happens most of the time. Sometimes immediatly, other times after a few minutes. Can anyone help me with this? Thanks.

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

I am having a major problem with swapfiles. Can anyone help

I have had a recurring issue for a few months now with accumulating swapfiles. My system drive fills with these files (65 x 1.9gb, the latest) slowing down the system due to finite disk space and causing some maintenence to be carried out. I have up to now been able to get rid of them using the finder to delete the actual files after making them visible in the finder(using IceClean by MacDentro). I can also use Omni disk sweeper to see the space on the drive as well as Disk Inventory X. Now I cannot delete the files. They have conglomerated into a unknown space that cannot be grabbed and trashed nor physically deleted through the finder.
I am using an SSD 120gb drive with a system size count of 42gb. Bar 5gb the rest is this ether space that wont go away. I have a feeling that this is going to need to terminal commands witch I do not have at my disposal. Can any please help? This is driving me mad. I have reset the PRAM numerous times but this is too lightweight.
Hard core terminal shyte, Bring it on. Please
regards
Ken

The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. OWC has also tested RAM sizes above Apples official limit.
Crucial
Other World Computing

Having problems with iphone 3g, can anyone help!!

I bought a secondhand iphone 3G and i am having trouble setting it up, didn't get the booklet that would off come with the phone, the problem is. when the phone is switched on and when the apple logo dissapears the next screen has a usb cable with an arrow pointing to iTunes and a slide bar, when sliding the bar to open the phone i get banner message saying Emergency calls only,
How do i get pass this problem?

set up itunes and have it running on PC
Then plug iPhone into a USB port and iTunes should see it
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
here is a user guide assuming the iPhone is running 4.2.1

Problems with constructors? can anyone help

I want to use the Math.random() class to generate a random number
to fill an array.In the 2 constructors i have this:
private int[] rand;
public Randomize(int ra[])
{rand = new int[7];}
public Randomize()
{Math.random();}
*note ra is a formal parameter
but nothing happens. The array rand does not fill up with random numbers
how can i fill it up with random numbers?

Hi Mike,
The Math.random() is a static method that returns a double value with a positive sign, greater than or equal to 0.0 and less than 1.0.
It does not return an array or a int. If you use the Math.random method, you will have to cast your double into an int. Also you need to create a for loop to fill your array and add code to check that the value returned from the Math.random method has not already been used.

I know what the problem is. But can anyone help me fix it?

Please, please somebody help me uninstall and reinstall my audio driver since it is not letting me play any music.

Right click on my computer, and choose properties. Then click the hardware tab, then click the device manager button. Click on the Sound, Video, Game Controller plus sign to expand that part, and find your audio driver and right click on that and choose Uninstall. After that, close all open windows and reboot your computer. The audio drivers should be automatically reinstalled when the computer reboots.
I hope this helps you.

My computer (windows 7) no longer recognises my ipod. This follows a new hard drive having been installed. Can anyone help?

As well as this I no longer seem to have a digitally signed driver. I have no idea if this is linked to the problem as well.
Can anyone help?
thanks

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

I downloaded iTunes onto my laptop and kept getting an Apple Application error so I also downloaded that and now I'm getting a Procedure Entry Point error as well as Error 7 (Windows Error 127) and I have no clue what to do. Can anyone help me?

I downloaded iTunes onto my laptop and was getting an Apple Application Support error so I downloaded that and now I'm getting a Procedure Entry Point and Error 7 (Windows Error 127) messages. I have no clue how to go about fixing whatever the problem is...can anyone help me?

iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreatWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Can anyone help me with my Imac that won't start up and continuously beeps

When I turn on my Imac it chimes then goes to a grey screen and starts a loud continuous beeping sound. It's only 6 months old - I put new memory in when I first got it and up until now there was no problem at all. Can anyone help me get it up and running again?
Thanks so much.

Thanks everyone for your kind advice. Reinstalled the RAM - still no difference - what I am getting is the start up chime, a grey screen, and then three loud beeps in a row then a pause then three beeps again and so on.
Tried starting up holding down D key - no joy. Any other suggestions gratefully received.
Thanks again.
rabbit 67

Problems connecting to Exchange - can anyone help?...

Similar Messages

Maybe you are looking for