Problems connecting to exchange server through VPN

I use Cisco VPN client version
5.0.0.1.0600 over a cellular line. Telenor 3G. I use a Nokia E65 with nokia PC suite and standard bluetooth modem.
The tunnel connects and all is well until I open Outlook. I get prompted for a username/password. None of the usernames work. I tried everything from domain admin to testuser. I get the following error:
http://img155.imageshack.us/img155/7406/46816658fr7.jpg
It works fine with VPN over xDSL. Does anyone know what's up?

Hi,
For info. VPN Client 5.0.02.0090 has the following resolved issue stated in the readme-file:
Resolved Issues:
CSCsh15103 Client using a Digital Cert cant connect thru a Cable/DSL router
It's the opposite of your problem but might be worth a try anyway?
Also, have you tried the usual MTU change to 1300. Outlook have problems if there are any MTU issues on the way.
//Rob

Similar Messages

Problems connecting to exchange server

My ipad2 was connecting fine to the exchange server a few days ago, and now it has stopped. I have been through all of the discussions and tried everything outside of a hard reset.
Other iPhone & iPad users in my corp are having no issues connecting. I know the server, domain, username, and password are correct.
I am getting the "unable to verify account information" . Makes no sense why it just stopped?! I am so frustrated and nothing seems to be working.
Please help!

Hi,
For info. VPN Client 5.0.02.0090 has the following resolved issue stated in the readme-file:
Resolved Issues:
CSCsh15103 Client using a Digital Cert cant connect thru a Cable/DSL router
It's the opposite of your problem but might be worth a try anyway?
Also, have you tried the usual MTU change to 1300. Outlook have problems if there are any MTU issues on the way.
//Rob

Outlook problems connecting to Exchange server

I am using client version 5.0, PIX 506e and Microsoft IAS to vpn into a corporate network. Once connected some users have problems with their Outlook unable to connect to the Exchange server. Trying to figure out if I need to make a configuration change, or if a Microsoft issue. Thanks.

The problem could be because of MTU sizing. Reduce the MTU sizing of the tunnel on both ends till the end users do not face any such connectivity problems. Packet reassembly and fragementation are some of the main causes for connectivity loss.

Problem connecting to exchange server - Outlook 365

Hi I am a user of Exchange 365, have just got a new Surface Pro 2 128gb through work and am piloting it for the company.
I can't for the life of me get Outlook to recognise the exchange server and set up mail for my work address.
It tells me that an encrypted connection to the server is unavailable, and then when I am forced to enter in the server details manually it tells me that "The connection to msoft exchange is unavailable. Outlook must be online or connected to complete
this action
In the meantime I have to use the 365 web app. This is really frustrating me!
I've tried reinstalling multiple times. Can someone please help?

Hi
Thanks this has helped me solve the problem.
I used the Outlook Anywhere connectivity tester you suggested. Selected Outlook autodiscover.
It told me that it could not resolve things on any of the 4 tests.
I saw that using the last test "Attempting to contact the Autodiscover service using the DNS SRV redirect method", was the only one likely to work in my case.
I had already changed 3 entries in dns to point at my DDNS address but this had not worked, from the errors I could see that it was just the certificate name not matching so I changed the DNS entries for Autodiscover, autoconfig and _autodiscover._tcp
to be webmail.domain.com which is a CNAME to my ddns address for the broadband router, which in turn forwards ports 80 and 443 to the exchange server for owa and activesync access. I got an error message saying that I had an illegal entry in my SRV record
as a CNAME is not allowed, but it saved the change anyway.
I reran the test and it worked.I can now make new outlook clients attach teo exchange.
Thank you, after 8 hours yesterday of trying to reolve this I suddnely got it to work on one laptop but the other still would not and had lost track of what I could have changed so had no idea what actually made it work.
Thank you for your suggestion.

Problem in accessing the database through VPN

I am having problem connecting to the database through VPN but it is working perfectly fine if i connect to the network directly.
It would be really great if you could help me to resolve this issue.
Thanks

I am having problem connecting to the database through VPN but it is working perfectly fine if i connect to the network directly.Fix the VPN problem.
Check the logfiles.
For better advice provide any meaningful detail.
If I do not poke myself in the eye, it does not hurt.
Tell me to to stop feeling pain.

Cannot File share or connect to server through VPN.

I used to connect to my work server through VPN. During September through December of last year, I had no problem connecting to the server, but I could never file share. A few weeks ago I tried connecting again but I can't. The VPN connection is fine, and there's no problem with the server, but I can't connect to it. I'm pretty sure I haven't changed any of my network settings.
Any Ideas??

Just thought I would give this a bump. I recently transferred over to a new computer (I did not import/migrate settings, I reentered them. No longer can I VPN into work. Running 10.5.7 I have entered in the correct DNS settings and the domain. No errors, it says I am connected but I cannot contact any servers or file share. Any thoughts?

Outlook connection to exchange server problem

We have a new domain and an existing exchange server. The problem is if i log in with a local computer account i can autodiscover and connect in cached mode to exchange no problem. If i then login with a domain user account the same computer (tried on other
workstations) will fail to auto discover, fail to connect to exchange even with manual settings. I cant find anything obvious in Group policy.
The server is setup with the latest 2013 Group policy templates with office 2013 templates
Users not logged in with the new AD server can connect to exchange
Users not logged into the domain can access exchange server
My feeling is its a local setting that is missing or needs to be changed in Group Policy but i am at a loss as to what it could be
I have disabled roaming profiles too and it makes no difference.
Any help would be greatly appreciated.
Steve

Hi,
Sorry for my delay. According to your description, I summarize your issue to the following points:
1. No problem when the user logs in Outlook with a local computer account in Cached mode.
2. Can’t connect to Exchange from an cache mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
3. Can connect to Exchange from an online mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
It is right? If I misunderstand, please feel free to point it out. Additionally, I noticed that the server is setup with the latest 2013 Group policy templates with office 2013 templates. Please confirm
if the Outlook cache mode is disabled by OTC or GPO. If there is following registry key applied on the machine:
Software\Microsoft\Office\15.0\Outlook\Cached Mode
Meanwhile, please try to install an Outlook 2013 with a fresh ISO file(Don’t use any template such as OCT template), see if the Cached mode Outlook can connect to Exchange server.
Waiting for your updates.
Regards,
Winnie Liang
TechNet Community Support

Problem in connecting to exchange server

I have generated a certificate as specified in the link http://www.dylanbeattie.net/docs/openssl_iis_ssl_howto.html. It generates an X.509 certificate. I installed this certificate on pop3 server on Microsoft exchange server. I also installed the certificate on client m/c. On client m/c, a Java application is running, which tries to read mails from exchange server using SSL. But this exception occurs when I run my java application:
javax.mail.MessagingException: Connect failed;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:106)
at javax.mail.Service.connect(Service.java:234)
at ci.cryopull.core.PullAction.execute(Unknown Source)
at ci.cryopull.core.PullAgent.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
It seems I am unable to connect to exchange server using this certificate. While I also tried a free trial certificate from thawte, that worked fine. Could u help resolving my problem?
Thanks

Peddard, you will have to be more specific on your settings. It's important to note that the iPhone's host name entry must resolve both internally and externally if it's going to work correctly. So, on your internal DNS server, you must make a mail entry with the same name as what you are publishing externally. In my case, mail.domainname.com is registered on our external DNS server with a public IP address. On the internal DNS server, mail.domainname.com registers to a 192.168.x.x address.
However, you can find in another post that in my situation, the iPhone would not work correctly on our LAN. It worked everywhere else but the issue seems to be that when on the Edge network and the LAN, there is conflicting DNS resolution. This was intermittent and unreliable at best.
Our workaround was to create a second network, simply wirelessly with a couple of Airport Extreme Base stations on a separate external IP address. Now, DNS resolved to the external address and it works like a charm. Not a fix, but a workaround.
JD

Can't connect to Exchange2003 Server through WRT54GS (via wireless)

I'm having problems conencting to my MS Exchange 2003 server, from an Outlook 2003 Client, when using wireless on a WRT54GS.
Hard wired - works fine.
Wireless - connection times out ("unable to connect to exchange server")
I can browse the internet through the wireless conenction, download (legal) music, etc. Cannot use Outlook/Exchange.
I disabled the "firewall" features on the router. (block external requests, etc)
WEP is enabled.
The Router was bought about 6 months ago (original firmware)
any suggestions? anyone successfully using Exchange across a wireless conenction?

first i'd suggest that you upgrade to the latest firmware....also open ports 443-447 under the port forwarding section of the router.

We are unable to connect to Integration builder through VPN.

Hi,
We are unable to connect to Integration builder through VPN.
Below are the errors we get:
a. In two of the PI 7.0 Systems we get:
     i. Cannot open connection on host x and port y.
     ii.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x and port:y
     iii. java.net.SocketException: Malformed reply from SOCKS server
b. In the other two PI 7.1 systems we get:
     i. MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
     ii. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port:y]
     iii. com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port: y
The hosts and ports are accessible. (Telnets and tracerts work fine for all the systems)
We are able to access the SLD and Runtime workbench on all the environments. However, Integration Builder tools are not accessible.
Any clue on what the problem might be?
Thank you,
Siva.

Hi Siva,
When you execute SXMB_IFR from PI, do you get Integration Builder page?
Are you trying to directly access the PI server by the known URLs?
Also, Following links may be of your use:
Integration Builder -Configuration is not openning?
Re: unable to logon to Enterprise Services Builder or Integration Builder
Regards,
Nipun

"There was a problem connecting to the server" in iTunes after migrating to new mac

I have a problem that is driving me crazy with my brand new iMac. I see many other people posting similar issues, but none of the other solutions seem to work for me.
I had a MacPro and bought a new iMac, on which I used Migration Assistant to set up. So the new iMac is virtually the same as my old machine in terms of appearance and installed applications. Both machines have Mountain Lion 10.8.2. All software on both machines has been through Software Update and is fully up to date, as are the connected devices (iPhone and iPad).
The problem is with iTunes. Every time I start iTunes (I think at the moment it checks my two connected devices) I get a pop up dialogue saying:
There was a problem connecting to the server "MacPro".
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
This dialogue continues to pop up constantly as long as iTunes is open, interrupting my work and frustrating me no end. The old machine is of course turned off and indeed is not available -- but I can't find what on the new iMac is so desperate to connect to it.
So far I have tried completing erasing my iTunes library, deleting all the preferences, reinstalling iTunes from a fresh download of the dmg, safe rebooting several times with no peripherals connected at all, and deleteing other preferences like the Login Items, iPhone config and iPhoto. I have also cleared Recent Items from the apple menu and opened "Connect to Server" in the finder and cleared all servers from the dropdown menu.
Last night I also completely restored my iPhone from scratch to see if that would clear away the issue and I have connected both iPhone and iPad to go through any apps that have permission to write content to my computer and deleted all of them completely from the devices.
Nothing has changed at all after all that, and I have run out of ideas. Clearly there is something somewhere that has my old machine's name hard coded in it but I can't see any way to search for it. I would grep my Library folder but I think a lot of the files are binary so I'm not sure that would unearth anything. I've seen many posts saying that Apple phone support (which I would qualify for) can't help with this issue and so I have put off phoning them to simply run through all the things I've already tried.
Any advice that anyone could offer would be extremely helpful. I can't use iTunes at all like this as it disrupts everything I try to do on the new machine.
many thanks!!

Nothing at all? Can't anyone help with this issue at all? I would be grateful for any suggstions as it is driving me crazy. It happens every time I open iTunes and also every time I open Mail.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

On submit button type - There was a problem connecting to the server.

Hi,
Please give me a solution for server connection issue. I am new to the adobe live cycle designer ES4.
I created a web form use of adobe live cycle es4 v.11.0 to retrieve the data from web service method. So, I created the WSDL type data connection in data view menu to invoke the .asmx?wsdl service and connection is established successfully. Then, I dragged and drop a button from object library window to invoke the service method and changed the type as submit button. In the submit button URL, I given the web service url as eg. http://<localhost>:<port>/Web_serive.asmx?wsdl. Finally, I saved it has a PDF file.
When I click the submit button, a pop up window is openning as 'preparing for submit..' and 'Receving data..' and finally, it shows a pop up error message as 'An error occured during the submit process. There was a problem connecting to the server'. I tried all possiblities and if any bad english grammer, sorry for that.
Please give me a proper solution for this issue.
With Regards,
G. Prabakaran.

After trying these suggested actions several times success has not been reached.
I understand you are getting unable to connect to server error message on your printer. I would first unplug router and printer for about 1 minute. I would plug router up first then printer. I would then try to enable web services. If not successful and you get same error message. I would follow these steps.
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.
8. Try again to access ePrint.
Let me know how it goes.
I am able to print wirelessly to the printer, print through eprint, scan, and copy things. The only thing that is not working is the printer itself connecting to the hpeprintcenter.com.
Kyle

I have my i Pad connected to my computer and I still get error message there was a problem connecting to the server

I was having problems connecting to my app store and safari, any games or anything that required going out to a server. I rebooted my wireless several times it is working and it shows a signal on my iPad so it was suggested I go into settings and do a reset. I have done this and it still is not working. the error message when I try to sign in with an Apple ID is "there was a problem connecting to the server". I even get this when I am connected directly to my computer through Itunes
Any suggestions?

Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer.

There was a problem connecting to the server error

HELP!
Right, so I upgraded to Lion on my MacBook Pro last night, and have spasmodically gotten the following error:
There was a problem connecting to the server "me409fs02"
followed by:
There was a problem connecting to server "me35syd08"
Now the weird thing is, me409fs02 and me35syd08 were servers at a company I used to work for 2 years ago. I have no idea why my computer is suddenly trying to log in to these old servers, or how to make it stop.
Here's a screen shot of what's going on in the console at the exact moment that the errors occur:
This is turning out to be a gargantuan pain in the butt and I'd really appreciate any help I can get.
Thanks in advance,
Brent.

G'day mate,
Is this only happening in one user account? If so, then you should look into the library folder of your user account and your login items (through "Users & Groups Preferences").
Check for any LaunchAgents or LaunchDaemons that could be attempting to connect to the server.
If it's happening for every user, then also check the Library folder at the root of your hard drive (LaunchAgents, LaunchDaemons and StartupItems).
Cheers,
Rodney

Problems connecting to exchange server through VPN

Similar Messages

Maybe you are looking for