Problems connecting to External Hard Drives

I've been connecting to my external hard drive using airpot extreme for a year now without any problems. However, I hooked up an additional hard drive to my hub today and I can't access either of them. Looking at aiport utility, both hard drives are listed but both say 0 users connected. When I try to 'connect as' nothing happens. Any ideas on how to fix this? Keeping in mind that I'm not the most computer savvy person on my best days.
Thanks in advance.

I can connect them both but only one at a time. I tried accessing the first drive and then accessing the second and it was knocking my network offline and I had to reboot. Now, I can connect to one (but only using Go>Connect to Server) and then unmount and connect to the other. Is this normal? I don't have much experience with mac of airport so I wasn't sure if I should be able to connect to both at the same time or not.

Similar Messages

HT204057 problems connecting an external hard drive to Time Capsule

I have a 2,5 multimedia hard drive connected to my brand new time capsule. But I can't access to the external hard drive from the iMac.
I can't access neither to the Time capsule data disk nor the external hard drive from my portable windows 7 computer.
Is there any restricction applying to the format of the hard drives?
Any clue how to configure the network in windows to access to the Time Capsule?

USB hard drives, attached to an AirPort Extreme or Time Capsule, work best when formatted as HFS+. Those formatted in FAT32 will work as well. Drives formatted in NTFS or ExFAT will not work.
When properly shared out, this drive can be accessed from both Macs and PCs, as well as, Linux-based computers. For PCs, this drive is considered a network drive and accessing it would be the same.

Is it possible to open a program when connecting an external hard drive?

Is it possible to open a program when connecting an external hard drive?
I have a external hard drive with an iphoto library. I just want to connect my drive and automatically see iphoto open! Possible?
I know there are some action scripts, am i right?

Ok, here are the steps to take. Doing this involves generating two scripts, the first of which will have the system monitor the attachment of a hard drive, and the second which will conditionally open iPhoto. To make these and set them up, perform the following steps (it is a little involved, but will get you the result you want):
Script 1: A launch agent to monitor attached hard drives
1. Open the Terminal utility in the /Applications/Utilities/ folder. Then copy and paste the following command into it and press Enter, which will open up an editor program in the Terminal:
pico ~/Library/LaunchAgents/iphotodrive.plist
2. Now copy and paste the following text to the Terminal window in its entirety so it is all entered into the Terminal editor:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>local.iPhotoDrive</string>
          <key>QueueDirectories</key>
          <array/>
          <key>WatchPaths</key>
          <array>
                    <string>/Volumes</string>
          </array>
          <key>ProgramArguments</key>
          <array>
                    <string>/Users/USERNAME/Library/iphotodrive.sh</string>
          </array>
</dict>
</plist>
3. Use the arrow keys to navigate your cursor down to the place where it says /Users/USERNAME/Library..., and change the text of "USERNAME" to be the same name as your account home folder. For example, my login name in OS X is "tkessler" so my home folder is also "tkessler," so for me this is what should go in place of "USERNAME" in the text above.
4. Now press Control-O to save the file, and then Control-X to exit the editor (use Control, and not the standard Command key here).
Script 2: A shell script to open iPhoto when your drive is attached
1. Type (or copy and paste) the following command in the same Terminal window to make the second script in the same editor:
pico ~/Library/iphotodrive.sh
2. Now copy and paste the following text into the Terminal editor:
#/bin/bash
if [ -d /Volumes/"IPHOTODRIVE" ]; then
        open -a iPhoto;
fi
3. Again use the arrow keys to navigate, and edit the text IPHOTODRIVE to be the exact name of the drive you would like to spur iPhoto to open. The name will be case-sensitive, and spaces are OK within the quotes.
4. Again save this file by pressing Control-O, then press Control-X to quit the editor.
5. Next ensure this new script can be run, so to do this now copy and paste the following command:
chmod +x ~/Library/iphotodrive.sh
Now to activate these scripts you can log out of your account and log back in, and they should work as expeted, and will launch iPhoto only when a drive named "IPHOTODRIVE" (or whatever you edited this entry to be) is attached to the system. This procedure will create two files at the following locations on your computer, so to undo it simply remove these two files followed by logging out and back in, and you should be good to go:
/Users/USERNAME/Library/iphotodrive.sh
/Users/USERNAME/Library/LaunchAgents/iphotodrive.plist
If you run into any problems, then write back here and we can figure out if there are any nuance details to cover for your setup.

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

Can I connect an external hard drive, with a FireWire connector to AirPort Extreme?

I am considering getting AirPort Extreme. I need to be able to connect an external hard drive with a firewire connection. Can it be done?

Sorry, but no.

I cannot connect my external hard drives (1 WD My Passport and 1 LaCie Porsche Design). The drives were connected and worked perfect, the WD is used as a Time Capsule, the LaCie is formatted as exFAT and used for miscellaneous. They are both USB 3.0

I cannot connect my external hard drives any longer. I have one WD "My Passport" used as a Time Capsule and one LaCie Porsche Design used for all different kind of data, formatted in exFAT. They worked fine, connected direct or through an additional USB hub or also attached to a Dell monitor. The Lacie helds my iTunes Library and the iPhoto library.
After I moved the iTunes library to the external drive, from time to time the drive went into a never ending loop and I had to shut down the laptop (MacBook Air).
The last time starting again the drives were not recognized any longer. I tried to connect them to another MacBook, which didn't work.
Starting with Windows 7, the WD is also not recognized at all (perhaps because of time capsule format?) and the LaCie gives an error.
Could anybody tell me if there is a chance to get them alive again? When I connect them now, they start to heat up quite fast without anything else happening.
Thanks

Hi,
Just want to clarify, have you checked to make sure the cords are not damaged (going from hard drive to computer and or any power source )?
You have also check to make sure that usb ports are working correctly?
If you have checked these things it may be that the external drives have failed.
I would google the error message from the LaCie drive before I do anything.
There are several ways that I know of, one is to put the hard drive in the freezer for a while (make sure you wrap it air tight) if this works it is not a permenint fix. You might be able to transfer information to another source.
The other method is to plug the hard drive into a hard drive connector a product like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817707192
to do this you would have to remove the hard drive from its enclosure and still this is not a guarantee it will work.
The finally way I know is using a recovery service. This can be rather expensive, and there are no guarantees

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

If I connect an external hard drive to the Time Capsule, all it automatically back it up?

If I connect an external hard drive to the Time Capsule, will it automatically back it up? Or do I need to somehow configure it in TIme Machine?

A HDD attached to the Time Capsule (TC) will not automatically back it up, nor can you configure Time Machine to do so. However, you can use the AirPort Utility to archive the contents of your TC's internal HDD to this attached drive.

I have upgraded to Maverick when i connect an external hard drive my security does not scan it now

I have upgraded to Maverick. With snow leopard when I connected an external hard drive, the Norton security would scan this drive. Since I have had Maverick this does not happen, I have updated my security.

How is the WD drive formatted and have you tried resetting the SMC?

I had trouble connecting my External hard drive

I had trouble connecting my External hard drive (My passport WD) with my macbook. It worked before but not now. The external hard disk is blinking and is spinning but just not showing up on my computer. I tried looking in disk utility and no theres no sign of the disk showing up.
Any help would be greatly appreciated!

Yes, I saw a post on one of these threads about a powered USB hub so I ran over to Office Depot and picked one up. I was finally able to see the HD in the Airport Utility. Yay!

Can I connect a external hard drive to the TC thru the Ethernet instead of the USB port so it will transfer data faster

I Want to connect the external hard drive so that I can transfer files faster then the USB 2.0. There is a thunderbolt to Ethernet adapter that you can buy I I just want to know if the hard drive can be accessed thru the Ethernet line instead of the USB. I think it will work faster than the USB. But not sure

It won't work.. the thunderbolt to ethernet adapter doesn't work without drivers and the external thunderbolt drive is not now or ever a network drive.
Yes you can plug an ethernet type drive into the TC.. or into anywhere on the network.. it is after all another network drive..
eg Another TC is a network drive.
Seagate or WD make reasonably priced network drives. But they will not have the HFS+ format which the TC does.
You can buy a NAS from any of a whole range of companies.. A NAS is an ethernet connected drive.
See the reviews here to pick a NAS.
http://www.smallnetbuilder.com/nas/nas-charts/view

I connected a external hard drive to the Time capsule but I can't get it to connect, I connected a external hard drive to the Time capsule but I can't get it to connect

I connected an external hard drive to the Time Capsule but can't get it to work.

And are you using a powered USB hub? The USB port on the Time Capsule is under powered, so you almost always need to use a powered USB hub, even if the hard drive has its own power supply.

I am having an issue with connecting my external hard drive to my airport time capsule.

I just recently purchased the new AirPort Time Capsule. The network set-up easily. However, when I connected my external hard drive (via USB) to it, the external hard drive does not show up in my Finder and I am otherwise unable to access the external hard drive from any computer connected the the network. When I plug the external hard drive in directly to my iMac, the external hard drive is recognized right away and I am able to access all folders. Any tips?

Check to make sure that the drive is formatted in Mac OS Extended Journaled or FAT32.
If the drive is formatted correctly and recognized by the Time Capsule, it will appear when you open AirPort Utility and click on the Disks tab.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the Time Capsule icon, then click Edit
Click the Disks tab at the top of the next page
If the drive is formatted correctly and not recognized, you will likely need to use a powered USB hub with the drive....even if the drive has its own power supply, since the USB port on the Time Capsule tends to be underpowered.

Can i connect an external hard drive?

Can I connect an external hard drive to the ipad? How about the new one or the iPad 2? I would like to be able to watch movies stored on the external drive.

Ordinarily no but I seem to recall someone once describing such a device. Mr. Google is your friend.

Problems connecting to External Hard Drives

Similar Messages

Maybe you are looking for