Problems connecting to iChat 4 on the server from a computer using iChat 3.

Is this possible? I am an intern at my school and I am facing this problem. What is happening is we are testing the Leopard server on new iMac 20" and we set up an iChat server. We can log onto the iChat server from the server iMac. But when we attempt to access the 10.5 server from our computers using Tiger (10.4.10), it says that we can not connect to the server. We are using the same user name and config as on the 10.5 server Any ideas?
This is the error message I receive when I attempt to connect to the iChat 4 10.5 server from a computer using Tiger (10.4.10):
Could not connect to host "server name here"
We currently have another iChat server set up on a server using Tiger and set up the 10.5 iChat server in the same way, yet it still will not work.

I too ran into the problem of iChat on 10.4.x, along with Adium, not succeeding at connecting to the Jabber process on MOSXS v.10.5.1, but simply editing the /etc/jabberd/c2s.xml file to comment out the "gssapi" authentication fixed it up swell. In our case, Active Directory isn't an issue since we're an all-Mac shop.
Here's the relevant section excerpted from the file:

<mechanisms>

<traditional>
<plain/>
<cram-md5/>

</traditional>

<sasl>


</sasl>
</mechanisms>

Similar Messages

Problems connecting to a remote OPC server in write mode using CWDataSocket control

Hi.
I have been struggling with an odd feature when trying to connect to a remote OPC server using CWDataSocket control, though I'm not sure if it's a CWDataSocket related problem. But anyway, the following error occurs: "Active: Can't write data." Error number: "-2147467259". Now, when I connect to a local OPC server
and write some data and then again connect to the remote server, no errors occure and reading and writing work fine. The same error occurs when I try the same in LabVIEW. What could be the problem?
No errors occure when I connect to the server with some other OPC client application.
Thanks in advance.
- Asko -

The ConnectTo operation (as are all DataSocket operations) is asynchronous. In order for it to complete, you must process Windows messages after calling it and before calling another operation. Is it possible that you are trying to write data before the connection operation is complete?
One easy way to test this would be to put the ConnectTo and the Write in separate control callbacks, cause ConnectTo to be called, wait a while, then cause the Write to be called. Alternatively, you could do something like the following:
dsWrite.ConnectTo txtUrl.Text, cwdsWrite
While Not ((dsWrite.Status = cwdsConnectionActive) Or (dsWrite.Status = cwdsConnectionIdle))
DoEvents
Wend
If this is the problem, then you'll probably want to go with the
second option. In a production system, you should include a timeout in the While loop so that if the connection actually cannot be made, you are not stuck in an infinite loop.

How do i use ichat for the 4gs, how do i use ichat for the 4gs

i would like to know how to start using ichat on my new 4gs ?

Hi,
There is no iChat on the iOS 5 devices
However iChat on a Mac can send SMS messages to a Phone - Providing the computer thinks it is in the United States and the Phone is serviced by a USA Carrier that takes part in the AIM Forwarding service.
8:07 PM Saturday; October 22, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to copy all the data from old computer to new computer (server)

Dear all,
As I want to upgrade the server from old computer to a new one.
I want to ask how and easy way to copy all of table, sequence, ......data from existing old computer to new computer.
The old server is window 2000 Server with oracle 10g
The new server may window 2003 Server with oracle 10g
Thanks a lot
Francis SZE

As far as I can see you are copying from db10g for windows to another host on the same platform and same OS, so a simple cold backup taken from the source database can be restored at the target host. You must first make sure the configuration files and service be created prior to performing the database startup procedure at the target host. You may also as suggested, perform an rman duplication task
~ Madrid

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

Mac mini Server 10.6 unable to search for files on the server from desktop.

I'm running Mac mini Server 10.6 with 15 various Apple Mac desktops 10.4 / 10.6. The problem i'm having is that i'm unable to search for files on the server from any of the desktops. I have fixed permissions and rebooted. I can perfomr a search though command - F and spotlight from the server.
Anyone have any ideas?

I have a Mac mini server with Mac osx 10.6.8 installed --- I have a website {UNDER CONSTRUCTION} installed on it with a REGISTERED DOMAIN NAME belizeansworldwide.com -->[DNS service w/GoDaddy] & DSL INTERNET service w/VERIZON --- {My server is the ONLY DEVICE CONNECTED to my VERIZON DSL router/modem}
When I enter my DOMAIN NAME or WAN IP # in my browser(s)--> Chrome OR Safari -- i get my Verizon modem
set-up page-->{this incl the WAN IP# as I expected}----{NORMALLY I WOULD ACCESS MY Actiontec
modem/router via 192.168.1.1} --- While in that webpage there's an option "shared files/folders" & clicking on that option DISPLAYS MY WEBSITE ---> {"PORT FORWARDING DID NOT RESOLVE THAT"}
My next attempt @ a solution was through my Server's SystemPreference>Sharing>Internet Sharing
& this the Original Object of my post ===> "MY SHARING PANEL DOES NOT INCLUDE THE OPTION
FOR 'Internet Sharing' among the others like CD DVD, Remote Login,Remote Management, Bluetooth Sharing, etc.etc ---- Hope this additional info will help to clarify &/or explain my problem
Thanks, & best regards to you & yours

Error while accessing a file located in the server from JSP

          Hi
          I am having problem while accessing the file located in the server from a JSP
          page. I am not getting the RealPath from a JSP page using getRealPath(request.getServletpath()).
          The same code is working if the jsp placd under defaultwebApp directory and not
          working if i create a war and deploy the same.
          I am using weblogic server 7.0 trail version.I am setting the context path also.
          Can any help me in this regard.
          Thank And Regards
          Anand Mohan


          Hi
          Thank you.Is there a way to read a file which is existing in the war file.
          Regards
          Anand Mohan
          "Wenjin Zhang" <[email protected]> wrote:
          >
          >In Weblogic, if your files are archived in a WAR, you cannot get an entry
          >as individual
          >file since it is only bytes in a large archive file. So getRealPath will
          >give
          >you null result. If you only want the path, try to use other getXXXPath,
          >getURL,
          >or getURI method. If you want to read the content, use getResource.
          >
          >
          >"Anand" <[email protected]> wrote:
          >>
          >>Hi
          >>I am having problem while accessing the file located in the server from
          >>a JSP
          >>page. I am not getting the RealPath from a JSP page using getRealPath(request.getServletpath()).
          >>
          >>The same code is working if the jsp placd under defaultwebApp directory
          >>and not
          >>working if i create a war and deploy the same.
          >>
          >>I am using weblogic server 7.0 trail version.I am setting the context
          >>path also.
          >>
          >>Can any help me in this regard.
          >>
          >>Thank And Regards
          >>
          >>Anand Mohan
          >

Error message: There was a problem connecting to MobilMe. The request timed out.

I've never had an account with MobilMe. MobilMe is not listed as an account in iPhoto. All software on iMac is up to date. I'm running OSX 10.6.8. While working in iPhoto, editing or trying to upload photos to FaceBook from iPhoto I get the error message: There was a problem connecting to MobileMe. The request has timed out.
For some reason iPhoto wants to communicate with MobilMe, even though I've never had an account.
I worked with ExpressLane (case # 231899367) thinking it was a MobilMe issue). It was a dead end. Any suggestions to remedy this annoyance would be appreciated. Thanks. ILIJA.

Strange, I got this error for the first time last night. I have a 27" iMac (late 2010 model); with latest Aperture. I recently added a Flickr account (have had a Facebook account on there for some time). I was uploading some to my flickr account, and noticed that even though the "use actual size" setting was used, it was uploading tiny thumbnails and not the full version.
It was after this, that I got that error. I haven't tried it again, as I'm now on my macbook at work. Will try again tonight.
I've also, NEVER had a .mac account, so no possibility of it being a legacy account.

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

I asked you last week how i can remove my foto's from the first IPad model,your answer is:connect the IPAD with your pc etc....but that's not working there is no connection,i dont find the IPad in my "computer"( as an extern object) but in my"printers" .

hello ! message to APPLE
sorry for my englisch,I speak Netherlands......
I did everything what you told me in your last mail.......but it's not working,my laptop cannot find the IPad in the "my computer" program;but it finds an "not known I Pad" as on "strang object " in the map for : "apparaten and printers" !!!!
my laptop does not reconigze my IPad !
It is a big problem ,that nobody in the 3 years that I have thid IPad.....can help me iiiiii
I ask this now the last time I think......and maybe I can write to a journalist to put this in the newspaper,........maybe so comes help from the media
anna-louisa

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
How did the photos get onto the iPad ? An iPad will only show in Windows Explorer if there are photos on it that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites - if the only photos on it were synced to the iPad from a computer then the iPad will not show in Explorer.
That is the computer that the iPad is synced to ?
If they were originally synced to your iPad from a computer then to remove them from your iPad connect your iPad to your computer and select it on the left-hand sidebar of your computer's iTunes under 'devices' (you can enable the sidebar via control-S on a PC)
And then use the Photos tab on the right-hand side of the screen to remove them
To remove all synced photos select an empty folder on that tab and sync that.

If the connecting fields are missing the data from knvh should be u00BBnullu00AB

Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
      itab-hkunnr = knvh-hkunnr.
      itab-datab = knvh-datab.
      itab-datbi = knvh-datbi.
    append itab. clear itab.
endselect.
endselect.

HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
   and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara

Multiple users working using the server from laptops

Hello everyone.
We have a Mac Mini Server in the house, and a couple of Mac laptops.
I know that using screen sharing I can control the server from a laptop. However, when doing this whoever is physically sitting at the server will see their mouse possessed and not be able to do their own thing on the server.
Given the fact that we have multiple users, would it be possible to have multiple people use their laptops to view the desktop of the server as they work on it, while logged in to their own individual user accounts, and control the server independently through those accounts?
Not sure if that description was clear or not, but I think you'll get my gist. Basically I want to use the laptops as thin clients to work using the server. Also key is that multiple people be able to do this at the same time.
Thanks for any suggestions!

The Mac OS X graphical interface is a single-seat design. One Mac, one seat.
There is no analog to Microsoft Windows Terminal Services, nor to multiple sessions on Windows XP Pro or analogous, nor multi-seat X Windows, nor to Thin Clients, with Mac OS X nor Mac OS X Server, short of the add-on package Aqua Connect or analogous.
One of the usual mechanisms for controlling a Mac OS X Server is via the Server Admin tools. These are independent.
Command-level management operations are also available via ssh and analogous. You can ssh into the server and manage many of the aspects of Mac OS X client and Mac OS X Server from the command line. These are fully independent sessions.
Typical Mac OS X Server doesn't require all that much management, and it's probably not the best to have an interactive user operating on a server box regardless. This because servers typically support multiple users, so outages and reboots and operational errors and crashes will effect more than just the user in the seat at the server.

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222

Problems connecting to iChat 4 on the server from a computer using iChat 3.

Similar Messages

Maybe you are looking for