Problems creating a sitemap in DW CS4

Hi everyone,
I enabled view site map for my version of Dreamweaver CS4 and when I select "map view" I get a dialog box that pulls up that says:
The site map cannot be built due to one of the following reasons:
-A home page hasn't been specified.
-The specified home page doesn't exist
-the home page is outside the root folder
Select a home page by clicking the manage sites button.
I tried making altering things as I saw best but it still isn't working. Any ideas as to what I'm doing wrong or not doing?
Thanks!
ashmic

In case I wasn't clear I'm trying to make a site map of the existing pages I've made for a site. I'm having no luck.

Similar Messages

  • After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

    After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

    Ok no difference, I don't get any drive errors that seem significant or numerous, sometimes I don't get any at all, the disk always verifies and I haven't had to run a repair on it yet. I've gotton one or two drive errors, I'll save them next time I run either DU or DW.... however with permissions, there are a lot and they all fix (except: see below: Last 3: ACL errors are always there) but as I keep having to do force quits and system re boots they keep coming back; posted them below IDK if this will help you to help me, LOL... but figured it couldn't hurt, the ones below are re-occuring I know i've seen them b4. . .  Don't know if this makes a difference but on initial install I had several font conflicts w/system fonts, I renamed suitcases and that error message hasn't come back . . . but do you think this could be a font issue . . . I have like 12,000 fonts of which a couple hundred are ususally always active . . . IDK it doesn't make sense to me it would be, but you never know... just a shot in the dark
    I also saved my last PS crash report and it was like 100 Pages long, I've never seen one that long, I make a pdf of it and post link to my idisk, if its something that you can interpet.
    Verify permissions for “Rayce”
              Reading permissions database.
              Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    ACL found but not expected on "Applications/Utilities".
    ACL found but not expected on "Applications".
    ACL found but not expected on "Library".
    Permissions verification complete
    Repairing permissions for “Rayce”
              Reading permissions database.
              Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    ACL found but not expected on "Applications/Utilities".
    ACL found but not expected on "Applications".
    ACL found but not expected on "Library".
    Permissions repair complete

  • Encore CS4 - Problem creating DVD folder

    I have been trying to create a DVD in Encore CS4 and have discovered that if I select the option to create a DVD folder on my hard disk, the resultant VOB files are corrupted in some way (although their sizes and names seem to be correct). However, if I instead burn a disk directly from the transcoded sequence, the result is often fine. Has anybody else encountered this strange issue?
    I'm using a quad core (Q660 2.4GHz) PC with 4GB of ram and plenty of spare hard disk space, running the 64 bit version of Vista home premium (SP1 applied). The footage (edited in Premiere CS4) is 1080 25p from an XDCAM PMW-EX1, transcoded to 720x576 (i.e. PAL).   

    In reply to the two responses so far posted (and thanks for these, by the way):
    1. I have not tried creating an ISO image instead. To be honest, I am more interested in knowing why the DVD folder creation fails.
    2. I check the VOB files by attempting to play them in a software DVD player (Power DVD). The corrupted ones result in a blank (black) screen and no audio. The ones successfully burnt straight to a DVD will play fine when the folder structure is copied onto my hard drive. 

  • Problems Creating a Blu-ray Disc with a Main (Static) Menu and Pop-up Menus

    I'm having problems creating a simple Blu-ray disc containing a Main Menu (Static Menu with a graphic for my background) and a single Pop-up menu assigned to all of my timelines.  I wouldn't think this would be so hard to create but every attempt I've made ends up with the navigation getting all messed up to the point that my Playstation 3 doesn't even recognize that the disc as being Blu-rey disc.
    I want a simply static Main menu containing a "Play all" Button, and a button for each additional timelines.  Im also using the override commands on my buttons so if someone just chooses to see one specific clip from the main menu, they will be taken back to the main Menu after their selected clip plays.  But then I also want a Pop-up menu assigned to the timelines so the viewer can switch to a different clip (timeline) without having to go back to the Main (static) menu.
    My Blu-ray Disc runs just fine if I only use a static menu in a project, or if I only use a single Pop-up menu assigned to each timeline, but not both a Static Main menu, and pop-up menus.  I'm using CS4
    Thanks.

    it's just copying files to it, not video.  If you put a blank blu-ray disk in the drive, it may show up in the finder.  A program like Toast can burn a blu-ray.
    http://www.roxio.com/enu/products/toast/titanium/overview.html

  • Problem Creating Hyperlink to another workbook

    I am having a problem creating a hyperlink to a worksheet in another workbook.
    Here is what I have done:
    Created the master and detail reports in 2 different workbooks.
    Executed the master worksheet to display the data
    Right clicked the field in the first row where I want to create the hyperlink, and chose Manage Links
    Clicked the New Link button
    Chose Worksheet for Where do you want to link to?
    Clicked Browse by the Destination Worksheet
    Clicked the detail report from the list of workbooks but the select button is grayed out
    Does anyone have any idea why it won't let me select the detail report to link to?
    I have OracleBI Discoverer Plus 10g
    Any suggestions would be deeply appreciated.

    Yes, I did add a parameter to the detail report so that I could get detail just for that one item. The part that is giving me trouble is specifying the Destination workbook/worksheet. I see the detail report when I browse but the Select button is grayed out so I haven't made it to the part where you identify what values to pass to the detail report yet.

  • Problems with updates after upgrading to CS4

    I am experiencing update problems after upgrading from CS3 to CS4.
    After completing the upgrade, I opened CS4 and then clicked on 'Help' and 'Updates'. The download was 280MB of updates, which duly started to install. However, during the install process, I received the 'installation incomplete' pop-up box and could only continue by clicking on the  ‘Cancel the current update and continue installing…….’ option. At the end, I  shut the machine down.
    This morning I have  run the CS4 updates again, this time downloading 80MB (I guess the bits that it  didn’t do last night). When installing, the same 'installation incomplete' popped up three  times.
    Any help would be much appreciated.
    Many thanks

    OS?
    Are you seeing which componenets are not successful? If no message in the progress window about what is being installed, there is probably a log.
    Have you tried going to the website to download the update installer?

  • I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

    I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
    I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
    Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

    Sandra,
    See this Apple support document for information on reporting an issue with your iTunes purchase.
    http://support.apple.com/kb/HT1933
    B-rock

  • I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • Problem creating Allocation Table with Reference to a PO

    Dear Folks,
    I am having problems creating an allocation table with reference to a PO in T-code WA01.
    I read the SAP help that some prerequisites need to exist:
    ==> You can only reference order items flagged as being relevant to a stock split (the Allocation table relevant indicator in the additional item data).
    Can anyone advice me where to find this stock split indicator?
    Also, can anyone advice me how to reuse an allocation table? For example, I had previously created an allocation table with many articles and various allocation rules. I already generated follow on documents for this table.
    Say after 2 weeks, I have the similar requirements that I can make use of the same table, only with minor adjustments to the quantity. How do I create a new allocation table using the existing allocation table data?
    Thanks and Regards
    Junwen

    Any idea please?
    thanks

  • Issue in creating a SiteMap application

    Hi Experts,
        I am working on creating a Sitemap application for our portal users.I am following the below link
    http://help.sap.com/saphelp_nw73ehp1/helpdata/en/49/e45186272f7517e10000000a42189b/content.htm
    i have added the com.sap.portal.navigation.api_service_api.jar file to java build path. i am not facing any issue in import or in java file.but when i try to build the dc i am getting the build error.
         [javac] ERROR: <path>: package com.sapportals.portal.navigation does not exist
         [javac] ERROR: import com.sapportals.portal.navigation.INavigationNode;
         [javac] ERROR:                                        ^
         [javac] ERROR: <path>: package com.sapportals.portal.navigation does not exist
         [javac] ERROR: import com.sapportals.portal.navigation.INavigationService;
         [javac] ERROR:                                        ^
         [javac] ERROR: <Path>: package com.sapportals.portal.navigation does not exist
         [javac] ERROR: import com.sapportals.portal.navigation.NavigationNodes;
         [javac] ERROR:                                        ^
    Am i missing something here?
    Regards,
    Naga

    Hi Experts,
        I am working on creating a Sitemap application for our portal users.I am following the below link
    http://help.sap.com/saphelp_nw73ehp1/helpdata/en/49/e45186272f7517e10000000a42189b/content.htm
    i have added the com.sap.portal.navigation.api_service_api.jar file to java build path. i am not facing any issue in import or in java file.but when i try to build the dc i am getting the build error.
         [javac] ERROR: <path>: package com.sapportals.portal.navigation does not exist
         [javac] ERROR: import com.sapportals.portal.navigation.INavigationNode;
         [javac] ERROR:                                        ^
         [javac] ERROR: <path>: package com.sapportals.portal.navigation does not exist
         [javac] ERROR: import com.sapportals.portal.navigation.INavigationService;
         [javac] ERROR:                                        ^
         [javac] ERROR: <Path>: package com.sapportals.portal.navigation does not exist
         [javac] ERROR: import com.sapportals.portal.navigation.NavigationNodes;
         [javac] ERROR:                                        ^
    Am i missing something here?
    Regards,
    Naga

  • Problem creating Network ACL for a ROLE in Oracle 11gR2

    According to Oracle Documentation when you create a new Network ACL you can add privileges to a user or role.  I need to create a new ACL for the UTL_SMTP package for a specific role, but when I granted it the users who have that role are still getting the "ORA-24247: network access denied by access control list (ACL)" error when they try to send an email.  If I grant the ACL privilege to the same users directly it works fine.  Is there any step I'm missing?  This is the test I have made on my Solaris 10 - Oracle 11gR2 (11.2.0.3) Standard Edition server:
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 21 09:31:52 2013
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    SQL> CONNECT system/******@testdb
    Connected.
    SQL> SET LINES 1000
    SQL> SELECT * FROM v$version;
    BANNER
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE    11.2.0.3.0      Production
    TNS for Solaris: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    SQL> COLUMN host FORMAT A20
    SQL> COLUMN lower_port FORMAT 99999
    SQL> COLUMN upper_port FORMAT 99999
    SQL> COLUMN acl FORMAT A40
    SQL> COLUMN acl FORMAT A40
    SQL> COLUMN principal FORMAT A15
    SQL> COLUMN privilege FORMAT A10
    SQL> COLUMN is_grant FORMAT A8
    SQL> COLUMN status FORMAT A10
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    no rows selected
    SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
    no rows selected
    SQL> CREATE USER testacl IDENTIFIED BY testacl;
    User created.
    SQL> GRANT CONNECT TO testacl;
    Grant succeeded.
    SQL>
    SQL> BEGIN
      2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL',true,'connect');
      3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
      4     commit;
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    HOST                 LOWER_PORT UPPER_PORT ACL
    localhost                    25         25 /sys/acls/test_smtp.xml
    SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
    ACL                                      PRINCIPAL       PRIVILEGE  IS_GRANT
    /sys/acls/test_smtp.xml                  TESTACL         connect    true
    After creating this ACL I test it like this:
    SQL> CONNECT testacl/testacl@testdb
    Connected.
    SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
    HOST                 LOWER_PORT UPPER_PORT PRIVILEGE  STATUS
    localhost                    25         25 connect    GRANTED
    SQL> DECLARE
      2     c utl_smtp.connection;
      3  BEGIN
      4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
      5     utl_smtp.helo(c, 'localhost');
      6     utl_smtp.mail(c, 'Oracle11.2');
      7     utl_smtp.rcpt(c, '[email protected]');
      8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
      9     utl_smtp.quit(c);
    10  END;
    11  /
    PL/SQL procedure successfully completed.
    SQL>
    This works fine and I receive the email correctly.  Now if I try to do the same thing for a role:
    SQL> CONNECT system/******@testdb
    Connected.
    SQL> BEGIN
      2     dbms_network_acl_admin.drop_acl('test_smtp.xml');
      3     commit;
      4  END;
      5  /
    PL/SQL procedure successfully completed.
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    no rows selected
    SQL> CREATE ROLE testacl_role;
    Role created.
    SQL> GRANT testacl_role TO testacl;
    Grant succeeded.
    SQL> ALTER USER testacl DEFAULT ROLE ALL;
    User altered.
    SQL>
    SQL> BEGIN
      2     dbms_network_acl_admin.create_acl('test_smtp.xml','TEST SMTP ACL','TESTACL_ROLE',true,'connect');
      3     dbms_network_acl_admin.assign_acl('test_smtp.xml','localhost',25);
      4     commit;
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SQL> SELECT host, lower_port, upper_port, acl FROM dba_network_acls;
    HOST                 LOWER_PORT UPPER_PORT ACL
    localhost                    25         25 /sys/acls/test_smtp.xml
    SQL> SELECT acl,principal,privilege,is_grant FROM dba_network_acl_privileges;
    ACL                                      PRINCIPAL       PRIVILEGE  IS_GRANT
    /sys/acls/test_smtp.xml                  TESTACL_ROLE    connect    true
    SQL>
    And now I test it again with the same user:
    SQL> CONNECT testacl/testacl@testdb
    Connected.
    SQL>
    SQL> SELECT host, lower_port, upper_port, privilege, status FROM user_network_acl_privileges;
    no rows selected
    SQL> DECLARE
      2     c utl_smtp.connection;
      3  BEGIN
      4     c := utl_smtp.open_connection('localhost', 25); -- SMTP on port 25
      5     utl_smtp.helo(c, 'localhost');
      6     utl_smtp.mail(c, 'Oracle11.2');
      7     utl_smtp.rcpt(c, '[email protected]');
      8     utl_smtp.data(c,'From: Oracle'||utl_tcp.crlf||'To: [email protected]'||utl_tcp.crlf||'Subject: UTL_SMTP TEST'||utl_tcp.crlf||'');
      9     utl_smtp.quit(c);
    10  END;
    11  /
    DECLARE
    ERROR at line 1:
    ORA-24247: network access denied by access control list (ACL)
    ORA-06512: at "SYS.UTL_TCP", line 17
    ORA-06512: at "SYS.UTL_TCP", line 267
    ORA-06512: at "SYS.UTL_SMTP", line 161
    ORA-06512: at "SYS.UTL_SMTP", line 197
    ORA-06512: at line 4
    SQL>
    I'm aware that role privileges doesn't apply inside procedures, functions or packages by default, but this is an anonymous block so it should use the active roles for the user.  I also tried adding a "dbms_session.set_role('TESTACL_ROLE');" at the beggining of the anonymous PL/SQL block but I got the same access error.
    Thanks in advance for any help you can give to me on this question, it would be very hard to grant the ACL to all the individual users as they are more than 1000, and we create more regularly.

    Thanks for your quick reply... I don't have a problem creating the basic ACL with the privileges granted for a user.  The problem appears when I try to create an ACL with privileges for a ROLE.  You can see here http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_networkacl_adm.htm#BABIGEGG than the official Oracle documentation states that you can assign the ACL principal to be a user or role:
    Parameter
    Description
    acl
    Name of the ACL. Relative path will be relative to "/sys/acls".
    description
    Description attribute in the ACL
    principal
    Principal (database user or role) to whom the privilege is granted or denied. Case sensitive.
    My issue is that when I try to create the ACL for a role it doesn't work.
    Have you ever created an ACL for a role? if so please send me an example or let me know which step I might be missing.  Cheers.

  • Problem creating hierarchy based on 2 physical dimension tables

    I'm having a problem creating 1 logical dimension with a drill-down hierarchy, based on two separate physical dimension tables. The errors I receive when navigating the drill-down hierarchy is:
    "Cannot find logical table source coverage for logical columns" &
    "Missing join between logical tables".
    I'm using OBIEE 10.1.3.4
    Here are the details of what I have setup sofar:
    Physical layer:
    Dimension table DIM_ORG with columns:
    -dimension_key
    -org_total_code
    -org_total_description
    -org_detail_code
    -org_detail_description
    Dimension table DIM_DEPT with columns:
    -dimension_key
    -dept_total_code
    -dept_total_description
    -dept_detail_code
    -dept_detail_description
    Fact table FACT_SALES with columns:
    -fk_org
    -fk_dept
    -sum_sales
    Physical Joins:
    FACT_SALES.fk_org = DIM_ORG_dimension_key
    FACT_SALES.fl_dept = DIM_DEPT.dimension_key
    Business Model & Mapping layer:
    I created a logical dimension ORG_DEPT. It contains two logical table sources (DIM_ORG & DIM_DEPT) and the following logical columns:
    - All Departments (mapped to dept_total_code)
    - Organisation (mapped to org_detail_description)
    - Organisation Number (mapped to org_detail_code)
    - Department (mapped to dept_detail_description)
    - Department Code (mapped to dept_detail_code)
    The business logical key is based on the combination of Organisation Number & Department Code
    The hierarchy I need is: All Departments -> Organisation -> Department so I created the following hierarchy for ORG_DEPT:
    - Total Level containing: All Departments
    - Organisation Level containing: Organisation Number (defined as the Logical level key) & Organisation (defined als the Drill level key)
    - Detail Department Level containing: Department Code (defined as Logical level key) and Department (defined as Drill level key).
    In the LTS of the dimension ORG_DEPT I've set the Content levels for the sources:
    DIM_ORG : Organisation Level
    DIM_DEPT: Detail Department Level
    In the LTS no -inner- joins have been added against related physical tables.
    I created a logical fact table SALES (based on the physical fact table) and joined it against the logical dimension table ORG_DEPT.
    In the LTS the Content level for ORG_DEPT is set against the Detail Department Level. No - inner- joins have been aded against related physical tables.
    When I create a report in Answers to test the hierachy and select only 'All Departments' I get the correct dimension value returned. When I try to drill to the next level I get the following ODBC error:
    "Cannot find logical table source coverage for logical columns: [All Departments]. Please check more detailed level keys are mapped correctly".
    When I create a report in Answers and select both 'All Departments' and 'Sales' I get the correct result. When I try to drill to the next level I get a different ODBC error:
    "Missing join between logical tables DIM_DEPT and DIM_DEPT: There must be at least one physical join link between the underlying physical tables".
    Any suggestions are welcome!
    Thanks!

    Hello Robert,
    Your suggestions were known to me but I still wanted to combine the two physical dimension tables in one logical dimension. So I've played around a bit more and found the solution: In my original setup I had two seperate logical table sources (one for each physical dimension table). The solution was to combine the two logical table sources in one logical table source. I achieved that by logical joining the DIM_DEPT table to the FACT_SALES table and subsequently to the DIM_ORG within the 1 LTS and using inner joins.
    Then I created the logical table key (a combination of org_detail_code & dept_detail_code). After that I could create the hierarchy with no problem.
    Edited by: The_Dutchman on Nov 4, 2011 9:43 PM

  • Problem Creating VirtualProviders Based on the DTP

    Problem Creating VirtualProviders Based on the Data Transfer Process .
    (1) I have created an Data Source(extract structure and extractor) on SYS1. Tested the extractor. It returns data as desired.
    (2) Then I replicated this Data Source to SYS2.
    (3) In SYS1 I created InfoCube(VirtualProvider based on data transfer process for direct access) .
    Till this point I have no issues .
    (4) But after that I am not able to "Create Data Transfer Process"  for this Virtual Infoprovider . When I try to create DTP the DTP type available for selection is "Scheduled" where as per the documentation I need to create DTP of DTP type "DTP for Direct Access".This DTP type I donot see.
    Is it a problem with the BW configuration or some user error.Any suggestions which may help would be realy appreciated.
    Thanks & Regards,
    priyadarshi

    Corrected some typo in my earlier update...
    Problem Creating VirtualProviders Based on the Data Transfer Process .
    (1) I have created an Data Source(extract structure and extractor) on SYS1. Tested the extractor. It returns data as desired.
    (2) Then I replicated this Data Source to SYS2.
    (3) In SYS2 I created InfoCube(VirtualProvider based on data transfer process for direct access) .
    Till this point I have no issues .
    (4) But after that I am not able to "Create Data Transfer Process" for this Virtual Infoprovider . When I try to create DTP the DTP type available for selection is "Standard(Scheduled)" where as per the documentation I need to create DTP of DTP type "DTP for Direct Access".This DTP type I donot see.
    Is it a problem with the BW configuration or some user error.Any suggestions which may help would be realy appreciated.
    Thanks & Regards,
    priyadarshi

  • Problem creating transactional iview for BW system

    Hi gurus
    We are facing one problem creating a transactional iview for a BW 3.5 system . We wanto to call transaction SU01 in our BW system using an iview. When we use SAP for html, we have all the menu on the iview , I mean the same result as if we use smen, not SU01.
    And if we use SAP GUI , we are always having the same GUI Error
    Sapgui 640 [Build 8986] Wed Apr 01 12:25:05 2009
    : 'service '' unknown
    Time          Wed Apr 01 12:25:03 2009
    Component     NI (network interface)
    Release          640
    Version          37
    Module          ninti.c
    Line          505
    Method          NiPGetServByName2: service '' not found
    Return Code     -3
    System Call     getservbyname_r
    Counter          1
    Please, can you help us?
    Thanks in advance and best regards.

    Thanks Bala for your quick reply. I´ve tried with function module RSBB_URL_PREFIX_GET  and all the settings were OK. Still the same result.
    Adding more information. We have another WAS 6.40 server with different Module(we have RM and XRPM , not BW) and we are having the same problems. I am wondering if its related with some special config or activation 
    Maybe  I´ve forgot some service activation in SICF? I´m able to reach the SMEN, but not the SU01
    or I´m missing some config elsewhere?
    Thanks in advance.
    Best regards.
    Edited by: Jose Ignacio Arlandis on Apr 2, 2009 8:41 AM

  • I have a problem creating a pdf from within Firefox using the print to function.

    I have a problem creating a PDF from within Firefox. I get an error message stating that Adobe PDF creation cannot continue because Acrobat is not activated. Acrobat Pro then opens. If it try to create the PDF again, the same problem. I have FF ver 3.6.10 and Acrobat Pro 8 (from Acrobat CS3).

    This is an Apple user forum, no-one from Apple is here.

Maybe you are looking for