Problems Creating R/3 46c Source System in BW3.50

Hello.
Does anyone know if there is a way around opening up your R/3 system when creating it as a Source System in BW? I have no problems when creating the Source System in DEV, but when I attempt to create it in QAS and PRD, I get the message "Changes to Repository or cross-client Customizing are not permitted". Also, short dumps for ALEREMOTE "Dynpro Send In Background" occur in the R/3 system after each attempt.
If there is no way around this, I guess we will just open the systems up to these type of changes and then lock them back down afterwards, but I am hoping there are alternatives.
Thanks for the help.

Hi Mike,
You must open the system for changes, there is no way around this. This is usually not a major issue but if the security people are concerned, you can open a trace on the admin user in the OLTP source system.
I have been involved in cases where the security guys had to open the system and watch the source system creation - not sure they learnt anything but they signed off on it!
Cheers,
Mike.

Similar Messages

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Create source system in BW3.5

Hi all
can anybody tell me the procedure for creating source system in BW3.5 using automatic method at this time i create and assign logical system in both BW and R3 system and create Background users in BW system now my confusions are
1 Is this nessory that i create a diffrent user which is not dialog user in BW or R3 and
2 Thing is this nessorry that no pre created RFC connection present in R3
thx

hi,
i m listing down the steps with brief description, check if you r going that way.
1.you have same background user in BW and R/3 with proper autho.
2.you created new source system in RSA13, selecting first option of automatic creation.
3.you fill in all details correctly in popup window "Create R/3 Source System", that comes up.
4.pressing ok, it will ask you to log in as admin in target system. Before loggin in check client no, it may be diff e.g. 000, then change it to yr system client no.
5.next it will give you RFC destinations screen. goto tab "Logon/Security", give password for the user thr. save the changes.
6.you can check the connection by clicking "Test Connection" and try also "Remote Logon". If your password is correct, then it will log you in the system.
7.now everything is setup, so comeback. It will ask you to replicate/activate datasources from the source sytem. Click "Replicate as Well".
pls mark question answered, if you have no further doubts
Now it is finished.
Hope it helps.
Regards,
Purvang

How to Create an R/3 source system and load data from there

Hello All,
Till now I have only worked with Flat files. I want to create an R/3 source system and extract data from there on to my Info Providers.
Does anyone has detailed steps for that. I am using BW 3.5 system
Thanks n Regards,
Abhishek

1. Type Transaction WE30. Check iDoc types
2. Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding yoursource system d.) Logon Information should contain source system client and name & password for you remote logon. We use RFC_SAB for BW logon to R/3 and RFC_AAE for R/3 logon to BW. Password for both is always xxxxxxx. e.) Execute your 'Test Connection' & 'Remote Logon'. You should NOT be prompted for a password, if you are then the logon info is incorrect. f.) Repeat above to verify RFCs for other systems (CRM etc)
3. Type Transaction WE21. iDoc Processing Ports.
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 version.(BW 2.1C should be release 4.x) d.) RFC Destination should be one created in SM59. If non-existent then create one
4. Type Transaction SE16. Data browser (for R/3  BW Connections)
5. Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOCtable for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missingentries.
6. Go to the SM30 main screen. Clients Overview
Enter 'T000' in the Table/View field. Click 'Maintain'. Verify correct Client and Description. If incorrect enter.
8. On BW Type Transaction WE20. Partner Profiles
9. On R/3 Type Transaction WE20. Partner Profiles
10. Check all is correct

Creating SAP R/3 source system in BI7

Hi Gurus,
Could anyone tell me how to create SAP R/3 source system in BI7 and how to configure RFC for BI7 and SAP R/3 4.7?
Thanks in advance
Muthu

Hi Muthu,
Check here.....
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks,
Vijay.

Need to create a flat file source system in bi?

Hi all,
i need to load the data from a flat file to an ods? can anyone pls tell me the steps to create the flat file source system in bi?
Thanks

Hello,
http://help.sap.com/saphelp_nw70/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6581e07211d2acb80000e829fbfe/frameset.htm
steps:
create source system file (if you haven't)
- create ods
- create update rules for ods and activate
- create infosource
- assign infosource with datasource (source system file)
- maintain transfer rules - maintain infoobject in sequence as flat file to transfer structure. map infoobject in transfer rules. activate transfer rules
- create update rules ods-infosource and activate
- create infopackage, specify external data path (recommended file put in application server)
hope this helps.
Regards,

Unable to create IDES R/3 source system in BI

Dear Experts,
I am stuck in some stage while creating source system in R/3, Pls guide me.
Following things are carried out already...
IMG Settings for Connecting to Other SAP Systems
IMG Settings for Connecting to a BI System
Now I am in source systems on BI side.....I am following these steps,
click on source system on LHS, right click on SAP folder on RHS and select create.
Now from here I am unable to move further...I am getting connection of BW to source system option, what is available destination here...what shud i select ? is it the ligical destination or the actual R/3 server ?
In target computer(Server) what shud i select ? if it is application server how do i find it ? Any t-code ?
Please guide me.
Thanks in advance. Points will be taken care
Regards
Mohan

Hi Shana,
Thanks for ur quick reply....In target computer(Server) what shud i select ? if it is application server how do i find it ? Any t-code ?
Pls guide me
Regards
Mohan

Creating source system in BW3.5

Hi all,
I create a source system connection using automatic method and fill up all entry in create source system window in next screen i give user name and password then these errors are shows
<b>Changes to Repository or cross-client Customizing are not permitted Choose 'Display object' or 'Cancel'</b>.
when i am going in help of that error it shows this information In this logon client any changes to repository and to crossclient customizing objects are prohibited
can anybody tell me why these errors are occur.
thx.

Hi Ankit,
As you posted yourself this message is appearing because your system is locked for any kind of editing. You need to open it to create this source system. This is generally done by a BASIS consultant.
You can go to SCC4 as mentioned above by Pankaj and open the client to create this.
Regards,
Sumit

Error when creating transfer structure in source system

We have just had a copy of the ERP production system done and connected it to our existing QA system (done by our service providers) for a test go-live of our ERP upgrade.
Now I cannot activate the transfer rules as the transfer structure cannot be created in the source system.
I have checked the settings in table RSBASIDOC and they look okay, I can only assume that our wonderful basis people have done everything they should have but cannot be sure they've done it all correctly.
The sourcesystem is active, the RFC's are fine.
And help for a desperate man please. I've got to get this working in 1 day as basis need the system back to do an Oracle upgrade.

Hi Jonathan,
Try to replicate the DS once again and the run the program RS_TRANSTRU_ACTIVATE_ALL to activate your transfer structure. Hope it helps.
Thanks and Regards
Subray Hegde

Problem creating transactional iview for BW system

Hi gurus
We are facing one problem creating a transactional iview for a BW 3.5 system . We wanto to call transaction SU01 in our BW system using an iview. When we use SAP for html, we have all the menu on the iview , I mean the same result as if we use smen, not SU01.
And if we use SAP GUI , we are always having the same GUI Error
Sapgui 640 [Build 8986] Wed Apr 01 12:25:05 2009
: 'service '' unknown
Time          Wed Apr 01 12:25:03 2009
Component     NI (network interface)
Release          640
Version          37
Module          ninti.c
Line          505
Method          NiPGetServByName2: service '' not found
Return Code     -3
System Call     getservbyname_r
Counter          1
Please, can you help us?
Thanks in advance and best regards.

Thanks Bala for your quick reply. I´ve tried with function module RSBB_URL_PREFIX_GET and all the settings were OK. Still the same result.
Adding more information. We have another WAS 6.40 server with different Module(we have RM and XRPM , not BW) and we are having the same problems. I am wondering if its related with some special config or activation
Maybe I´ve forgot some service activation in SICF? I´m able to reach the SMEN, but not the SU01
or I´m missing some config elsewhere?
Thanks in advance.
Best regards.
Edited by: Jose Ignacio Arlandis on Apr 2, 2009 8:41 AM

Error when creating R/3 source system in BW3.5

I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.

Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew.

How to create DataSource for BI Source System in RSA1?

I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
How can I create DataSource objects for my BI system?

Hi,
I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
Hope this helps
Regards,
Srini

Problems Delta Extractor after Homogeneous Source System Copy

Hi,
We have R/3 system landscape HUD, HUQ, HUP. And we have BW system landscape BWD and BWP.
We connect BWD to HUQ and BWP to HUP.
We made a homogeneous system copy from HUP to HUQ.
We haven´t made any homogeneous system copy from BWP to BWD.
We have applied the next OSS note after source system copy:
325525 Copying and renaming systems in a BW environment
184322 Procedure after DB copy of BW source system
184754 Procedure after BW database copy.
But we have problems in our BW Development (BWD), and we have the next Dump "MESSAGE_TYPE_X" when we can change any delta infopacket, the next text are from Dump:
"MESSAGE_TYPE_X" C
"SAPLRSS1 " or "LRSS1F11 "
"RSM1_CHECK_FOR_DELTAUPD"
I think that the problem is about inconsistencies between RSSDLINIT/SEL tables in BW side and ROOSPRMSC/F tables in R/3 side.
Please could you tell how can i solve this Dump, because i can restrart and initial and delta packet for different Datasource and i can´t do anything.
Thanks in advanced,

Hi,
We are upgrading our R/3 system from 4.7 to Ecc 6.
While copying database tables we are using Clinet Carrier tool which is considering only clinet dependent tables. Hence we are loosing our BW delta queue entries in RSA7 of ugraded system.
We found ROOSPRMSC and ROOSPRMSF tables and copying these 2 tables may resolve the issue and We copied and delta went fine.But we are not sure of only these are the tables to be considered.
Please let us know what are the relevent tables to be considered to make the Delta to work while copying Data base tables from one system to another.
Thanks in Advance
Regards,
R@ngzz

Re: Create new R/3 Source Systems

Hi Gurus,
In my current project implementation configuration moved to production. Almost ready to Go Live. Then the requirement change and data need to be pulled from a new R/3 client.
The Source system is not created in BI Devlopment client. I created RFC connection.
Trying to create a new source system. Give required parameters. The connection was not successful.
These are the parameters
Background unser in the source system : ALEREMOTE
Background user in BW : ALEREMOTE
Is this set up correct?
What would be the password to be given for the:
Background user in the source system
Password for BW user
Kindly advise.
Thanks

Sapuser,
You should give the ALEREMOTE user password for bg user in teh source system. This is because the user may not have the background job execution authorization.

Problem in extracting data from source system

HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

Problems Creating R/3 46c Source System in BW3.50

Similar Messages

Maybe you are looking for