Problems Creating Slideshow DVD using PSE 8.0

I have created a slideshow DVD in the past without problems. I have recently created a new slideshow of photos along with audio. It previews just fine in both PSE and Windows Movie Maker, but after I burned the DVD, only one song plays back when the DVD is in the TV.
Any suggestions?

Unless you have the combine programs Photoshop Elements & Premier Elements; there are limitations.
If you have other software; it’s possible to combine multiple tracks or play lists ant then attach them as a single file in the slideshow editor.

Similar Messages

I am currently experiencing problems burning a DVD using iDVD. I have created a project in iMovie. I have shared it to media successfully however when I try to burn it I receive a messaging advising there is insufficient disk space on assets.

I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name:          MacBook Air
Model Identifier:          MacBookAir3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA31.0061.B01
SMC Version (system):          1.67f10
Serial Number (system):          C02DRL8JDDQX
Hardware UUID:          53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...

Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option.

Create a DVD using Premiere Pro and Encore - delay between audio and video (in ms)?

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
My sequence settings in Premiere are:
DV PAL, 25 fps, 720x576 (16:9), D1/DV PAL Widescreen, lower field first, Audio: 48000 Hz
My DVD settings in Encore are:
MPEG-2 (MainConcept MPEG-Video), 720x576, 25 fps, lower field first, Widescreen 16:9 (1,458), Bitrate VBR, 2-Pass, Min 1,5 MBit/s Target 4 MBit/s, Max 9 MBit/s, GOP: M-Frames 3, N-Frames 12, Audio: Dolby Digital, 192 kbit/s

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
Frame accurate is the best you can achieve and that means 33 milliseconds at best.

Problem creating slideshow

I've created a slideshow in iPhoto '09. It looks great on my monitor. I click on 'Share -> Send to iDVD. I can then preview it, but it looks absolutely awful. All the images are very dark, lost detail in the shadow areas, and it has a red color cast so everyone looks sunburned. I haven't actually burned it to a DVD yet, will try that tomorrow. I also can't get it to loop. It is about 3 1/2 mins. long, no music, and I was hoping it would just continue looping like it does on my iMac. I have a Macbook Pro, but at the restaurant where this will be showing, they do not know how to hook up a Mac to their projector. They couldn't give me specifics about their projector, so I am borrowing a PC laptop to run a DVD (hopefully).
I have been able to copy the slide show to a flash drive, and it shows very well using that, but it loses it's looping function.
I know this is a Mac group, but if I can import the slideshow onto the PC, and show it that way, does anyone know how to make it loop (play continuously)? I'm in a time crunch here, because this is needed at a party in a few days.
Thanks so much for any suggestions you can throw my way.

Me again! On my iMac, I opened up Quicktime, dragged the slideshow over to it's icon on the dock, clicked on 'View -> Loop' and it worked brilliantly. Images look good, and yes, it DID loop! Yay!
Now, does this drag and drop routine work on a PC? How do I get it to open on a PC? And will it have the same icons in the top menu bar? I told you I was ignorant about PC's!!!
Thanks so very much for your help. I can now burn it to DVD without really worrying about the looping. The DVD will now just be a remembrance and not really need to repeat endlessly.

Problems creating a dvd on premeire elements 9.

It won't create a disc menu and cuts the movie short no matter what I do, it won't include all videos. I do not have autoplay selected anywhere that I can see. Why is it cutting 30 minutes of my video as well?

rtischler
Premiere Elements 9.0/9.0.1 on Windows XP 32 bit
Do not give up. Let us see what we can do to get your project moving forward if possible. Several important consideration.
1. Computer resources and a large project.
Your Premiere Elements 9.0/9.0.1 is only a 32 bit application running in a 32 bit computer environment and as such has all the limitations of 32 bit system, namely maximum supported installed RAM = 4 GB of which typically 3.2 to 3.0 or less of that are available. You have a 2 hour plus which is maxing out the capacity of the disc. You have a lot of menu pages (1 main menu and 7 scene menu pages). The location of your Scratch Disks and how much free hard drive space there might be factoring into all this also.
2. Premiere Elements 9.0/9.0.1 will allow no more than 25 menu markers on that Timeline. That is the same for Premiere Elements 10 and 11 as well.
The history of that can be found
ATR Premiere Elements Troubleshooting: PE: Menu Marker Limitation/Implementation Update
So the number of main menu and scene menu pages will be impacted on how many pages 25 markers fit into.
But, you are not losing Timeline content in this regard. The Timeline content after 25th marker is there, it just does not have a menu button to access it.
You pick the 25th scene and then let it play out to the end of the Timeline. If you want less pages put still want 25 menu markers, then pick a menu (or create one) that has more buttons per page designed into it).
Things to do:
a. Check the Scratch Disks (Edit Menu/Preferences/Scratch Disk for location and free hard drive space.
Check for pile ups in the Adobe Premiere Elements Preview Files Folder, Media Cache Folder.
Go to Edit Menu/Preferences/Media and hit the Clean button in the Media Cache Database area.
b. Find a menu or create one with more buttons per page.
c. In the burn dialog, tell us what you see for Space Required and Bitrate (with check mark next to "Fit Content to Available Space".
d. Help to focus me in on
The video cuts out a 1:31:54 no matter what I do, the video I created is 2:04:15. I also never get a menu no matter what I do, even though it shows a menu in the creation area and when I preview it.
Do you mean that you play back the Timeline in the Edit area monitor and the playback refused to go beyond the 01:32:54;00 mark?
or
Where do you never get a menu...in the DVD-VIDEO on DVD disc that you burn to disc using Share/Disc/DVD disc?
e. What happens if you make a copy of this project (File Menu/Save A Copy) and then use the copy to delete 1/2 the project? Can you
now burn that reduced Timeline to DVD-VIDEO on DVD disc with menu without problem?
Please consider. If you get a far as what is indicated in your screenshot, you should be close to success.
Thanks.
ATR

Problems creating PAL DVD containging clips with Encore CS5

Hi,
I was asked to create a menu for a DVD containing several movie clips which are mostly .FLVs and then some .AVIs. Though I'm complete new at all this DVD creating thing I got a nice working menu but when I built the DVD (which took about 45 mins) I got an error stating something about "no mpeg movie". The disk was burnt anayway (no way I could prevent that) but it doesn't work either on my pc or the DVD player.
Do I have to convert the clips before importing them into Encore? and if so, which software can i use for that? I have only limited internet access at the moment so I cant research the whole WWW for a solution. Therefore sorry for bothering you with such newbie stuff
anyway... thx for answers
M.
Oh, I'm using Productive Suite CS5 (english version on Win 7)

Depending on what is inside that AVI (see below) you should have no problems with Encore transcoding the AVI into the MPEG2/VOB format used on a DVD
I don't use FLV so have no idea if it will work with Encore (see further below)
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
CS5 Encore Files & Formats http://help.adobe.com/en_US/encore/cs/using/WS5C9E1CF8-B5BC-436f-89D3-61DDC02A2C47a.html
Also... CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

Another "how to create HD DVDs using iMovie" question

I am able to download my AVCHD footage from my Sony videocam into imovie11 (on my mac mavericks platform)....and am happy enough with using imovie as an editing program for my project. And when I am done with my "project" imovie delivers to me a MPEG-4 file. It retains HD content (1920X1080p).
My Sony blu-ray player (BDPs350) will not play this file ...(strangely because it plays everything else)... so my question is what is the best (and lowest cost) way to create an avchd dvd of my project which will play in my Blu-ray player (and not suffer much degradation). My Sony PMB software did a great job in the past, but it is not available for Mac. I am on the verge of buying Toast and "hoping" it will work but their customer service was not reassurring when I talked to them recently. Will Toast 11 do the job?

Yes and I said that
Roxio Toast - INCLUDING BD-Component can burn to both DVD and if You got a BD-Burner to Blu-Ray disks.
BUT
DVDs are 4.2-4.7Gb and BD-disks 24Gb (If I remember rigth) - Meaning that You only can put about 20 minutes movie on a SL-DVD.
This BD-DVD - can only be played on Blu-Ray players (no standard DVD-player playback these. Not even Your Mac unless it got a special program that can do this (but to playback true BD-disks a dedicated BD-player is a must)
AND - My BD-DVDs play back greatly on my PlayStation3 - BUT NOT ON some Cheap Samsung BD-players !
Do not know why.
I use:
- Verbatim
- DVD-R
- SLOW BURN speed !
And to me Roxio Toast Bundle was great value - especially Spin-doctor - as I have old vinyls and sounding bad - some sounded as brand new after processing in this. (and lot's more - back-conversion of DVDs, file conversion etc)
Yours Bengt W

Create basic DVD using DVD Pro

I am new to DVD Pro...
I can trying to create the simplest DVD, auto play (start).... and I cannot even get past the myriad options and nomenclature. I have read and re-read the beginning chapters of the manual and am getting nowhere. All I want to do is take Quicktime movie (3GB) in HD that I have created using Final Cut... and jam the highest quality possible into an SD playable DVD. I know that allowances have to be made for audio, etc. but the video should be nowhere near 4.7GB size.
I've used iDVD, but this pro software is very frustrating - isn't there a tutorial somewhere?
Many thanks if you can give any suggestions!
Paul

Thanks very much Nick,
I found some tutorials... of course the tutorials do not show you what to do in the event of an "error message" - and of course cannot address mistakes that are inevitable.
My goal is: to squeeze as much resolution from a 3 minute, 3GB Quicktime movie in HD 16:9... building in DVD Studio seems to create error messages "video bit rate too high."
I am trying to create an SD DVD, from an HD video that is 3GB - and there has got to be a way to make the video look better in SD... right now the file is correctly letterboxed, etc.. but the file size of the video is only 128MB, and it looks awful. How is it possible to improve bit rate without getting "video bit rate too high" error messages?
Many thanks,
Paul

I have a camcorder that records in the .MOD format. It is a Panasonic SDR-S26 and is not compatible with MAC. I want to create a DVD using the video on my camcorder. How can I do this?

My operating system is OS X (version 10.6.8) and I have a Mac Mini.

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

Problem creating PDF file using the Adobe PDF printer

Apologies if I have hit the wrong forum for this issue.
I am using Adode Acrbat 9 PRO version 9.4.6 on a Windows 7 SP1 machine.
I am running an application that presents information on web pages that I need to capture as pdf files. I am using an automation tool so it is limiting my posibilities of accomplishing this task.
I am attempting to use the Adobe PDF printer as the vehicle to create these PDF files but have encountered the following issues
The page is truncated on the right hand side
Only 1 page is created when I was expecting 7
I have specified a file path for the ADOBE PDF Output Folder ... C:\Windows\Temp and
checked the box "Add document information" but I am not given the opportuniy to enter a file name. It is using the file name from the URL
To verify my PDF content I used a different method to create the PDF from the same web page
Right click within the web page and select Convert to Adobe PDF. The pdf file has the full content with no truncation and is 7 pages in total.
Unfortunately I am unable to use this method with my automation tool
Any pointers will be gratefully received

Some progess
I changed the page orientation to landscape and that removed the truncation. I am not sure why it is not using the "shrink to fit" but for the purposes of this exercise I can live with this solution.
If I click Print Preview I can view all pages and then if I select the Print Icon I get a PDF file containing all pages. This is so bizarre.
So to recap
File > Print > Adobe PDF Printer only creates 1 page
File > Print Preview > Print Document (Alt +P) > Print >Adobe PDF Printer creates 7 pages
I guess this would be a good time to call support to see what they have to say on this topic.

Problem creating standby database using RMAN

I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukanta

channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M

Problem - Create RESTFull Service Using SOA Suite

Hello folks, I am facing an issue while trying to create a simple REST WS with JDev and SOA Suite 11g. I have tried with JDev 11115, what I get from that is when I call the service endpoint I get a null pointer exception, just as described here:
http://biemond.blogspot.com/2010/05/http-binding-in-soa-suite-11g-ps2.html
I then tried to use JDev 11120 but the SOA Suite extension does not work with this version.
Any ideas on how to resolve the issue? Is there any bug fixes for JDev 11115?
Thank you in advance,
Andre

I am having the same issue. Any help is appreciated.

Creating slideshow not using iweb tool...suggestions pls

Hi - I'd like to create a slick looking slideshow that doesnt force me to include all the images on the same page as the button. It just needs to be simple and fade to black (like set up photoblog sites so to speak), and without having that iweb generic 'slideshow' button I'd like to have my own buttons.

If you download the latest version
(click here to start download: http://www.hagus.net/files/SimpleViewerPlugin.zip )
it is autoinstaller, you just download it and it will unzip, automatically an installer window popsup and you can install.
Afterwards you open iPhoto, go to File=>Export and that's it.
No need to search any library at all, that was with an old version and yes there is no such folder Plugins directory as it was moved into the iPhoto application package itself... Applications=>iPhoto=>Right click=>Choose show package content=>there is a plugin folder)
But as I previously said there is no need to go through this.
Regards,
Cédric

Problem creating sales order using IDoc ORDERS05 (Inbound)

Hello Experts,
We are trying to create a sales order using the IDoc ORDERS05 with process code ORDE for creating sales order. I am getting the following error "VKORG, VTWEG, SPART cannot be determined for customer 0000006000 , vendor
Diagnosis
No sales organization, distribution channel or division were sent to the IDOC. This data is necessary if a sales order is to be added automatically. If this data is unavailable, you cannot create a sales order document.
I was not able to find the fields to fill the distribution channel and divison in the Idoc structure. I have filled in Sales organization in E1EDK14 segment as 3000.
I am not able to figure out the cause for the error.
Same data works fine from BAPI_SALESORDER_CREATEFROMDAT2.
Please help.
Thanks,
Suma
Edited by: Suma B on Jun 17, 2008 11:12 AM

Hello Suma
In this case I would recommend to debug the IDoc processing.
Call transaction WE19 and start the inbound processing of your IDoc in debugging mode. The error message will most likely occur in function module IDOC_INPUT_ORDERS.
LOOP AT idoc_contrl.
* SET/GET Parameter und interne Tabellen neu initialisieren
* initialize SET/GET Parameter and internal tables
    PERFORM initialize_organizational_data.
* IDOC-Segmente in die entsprechenden Anwendungsdaten übernehmen
* Move IDOC to internal tables
    PERFORM interpret_idoc_orders.                    "<= check here
* Prüfen ob gewisse Segmente gefüllt sind
* check IDOC-Segments
    PERFORM check_idoc_segments.                 "<= check here
* Prüfen und Ermitteln von Organisationsdaten
* check internal tables and determine organization data
Regards
Uwe

Problem creating NTSC DVD

dear all,
I cannot manage to make NTSC DVD with ADOBE ENCORE.
It all went fine with the PAL version. Then I exported mpeg NTSC from the editing programme, which I added to a ENCORE NTSC new file, I added Wav audio files (which is requiered for NTSC in addition to mpeg), and add subtitles in Uff-8. ENCORE first transcodes the audio files, and then "general error" (errore generale in italian). I do not know what is wrong.
I tried to do it without subtitles, but error again.
I deleted the mpeg audio track, and only worked with the Wav. but error again
I add the wav in audio track 2, and linked all files to the audio track 2. But error again.
any idea please?
Thanks and good work!
matthieutje

Drop the MPEG Audio.
It's an optional format in NTSC (and in PAL these days) and not allowed as Audio Stream #1.
Use Dolby Digital or LPCM as Audio Stream 1 instead.

Problems Creating Slideshow DVD using PSE 8.0

Similar Messages

Maybe you are looking for