Problems Downlaoding 10g AS Business Intelligence for Solaris Disk 2

When I try to download this cpio file:
http://download.oracle.com/otn/solaris/ias/1012/OracleBI10gSolDisk2.cpio
the download seems to stop after 408M, even though the file size is shown as 696,795,136 on the download page. When I try to unarchive the file using cpio -idmv, I get the following:
cpio: Can't read input: end of file encountered prior to expected end of archive
Is there an alternative site available, or can this link be fixed?

Thank you Paul for your workaround!

Similar Messages

SQL Server Data Tools – Business Intelligence for Visual Studio 2013 (SSDT BI) and SSIS on SQL Server 2012

This great blog entry titled
SQL Server Data Tools - Business Intelligence for Visual Studio 2013 (SSDT BI), link below, highlights the lack of support for SSIS projects using SQL Server 2012, VS 2013 and SSDT BI for VS 2013. I see there is a new version
on SSDT BI for VS 2013 (12.0.2430.0, File Name: SSDTBI_x86_ENU.exe, Date Published: 10/27/2014) link below.
Does this version support SSIS projects using SQL Server 2012 using VS 2013 and SSDT BI for VS 2013?
http://blogs.msdn.com/b/analysisservices/archive/2014/04/02/sql-server-data-tools-business-intelligence-for-visual-studio-2013-ssdt-bi.aspx
http://www.microsoft.com/en-us/download/details.aspx?id=42313

Hi cjrinpdx,
According to the picture, it seems that we can use SSIS 2012 support is not included in SSDT-BI for VS 2013. And based on the previous versions, SSIS always different from SSRS, SSAS.
SSDT-BI for Visual Studio 2012 supports versions of SQL Server as follows:
SSAS project can target SQL 2012 or lower
SSRS project can target SQL 2012 or lower
SSIS project can target only SQL 2012
The following blog is for your reference:
http://blogs.technet.com/b/dataplatforminsider/archive/2013/11/13/microsoft-sql-server-data-tools-update.aspx
Since I have no environment to test this at this moment,
I recommend you that submit the feedback at
https://connect.microsoft.com/SQLServer/.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to install Business Intelligence for Visual Studio 2012

I have tried and tried to get the templates to show up in Visual Studio. I have tried all the suggestions that could be found from others in 2013. I am down to the "Command Report.NoOp" message when I click on "Sql Server Data Tools for Visual
Studio 2012", under Sql Server 2012 menu.
Can anyone help me get rid of this error message? I can't tell how many times I have uninstalled and reinstalled or repaired 2012 software. I believe I finally have the correct SSDTSetup.exe file and SSDTBI_VS2012_x86.exe file. The versions are 11.0.3402.0
and 11.1.31203.1.
I have spent 3 days trying to get this working so I can create some SSIS projects. Please someone help me.....
thanks,
SMA
Shawn M Austin

Hi Shavona,
According to your description, we need to verify if the error message is “Command "Report.NoOp" is not valid” when you install Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2012.
If yes, it seems that the BI Templates are not installed properly. Please ensure that you have selected “Perform a new installation of SQL Server 2012” instead of “Add features to an existing instance of SQL Server 2012” when installing the
update.
For more information about how to install SQL Server Data Tools - Business Intelligence for Visual Studio 2012, you can review the following post.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/651b9ed6-ec9e-46d7-b26c-d9013febbce1/business-intelligence-project-templates-are-missing-on-sql-server-data-tools-2012?forum=sqlreportingservices
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Download Oracle 10g Character set scanner for Solaris

http://www.oracle.com/technology/software/tech/globalization/index.html
the above link contains only the oracle 9i Character set scanner but I need the Oracle 10g Character set scanner for Solaris
please assist me.

Pl see MOS Doc 745809.1 (Installing and configuring Csscan in 10g and 11g (Database Character Set Scanner)
HTH
Srini

Error installing SQL Server Data Tools - Business Intelligence for Visual Studio 2013

Hi
I am trying to install SQL Server Data Tools - Business Intelligence for Visual Studio 2013 and am getting the following error
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
I am running
Windows 8.1 x64
SQL Server 2014 Developer Edition x64
Visual Studio 2013 Professional
Any help would be appreciated.
Thanks
Biztalk Developer

Could you please check if Windows Installer service is running and is in automatic startup mode.
The other thing is, if you’re running an x64-based SQL instance (64-bit), make sure to select “New Instance” on the Installation Type page, and NOT “Add features to an existing instance”.
http://stackoverflow.com/questions/24989187/64-bit-microsoft-sql-server-data-tools

Business Intelligence for Telesales

Hi,
Any one have idea about business intelligence for telesales.
please give a any document for business Intelligence for telesales.
please give any document link.
Regards,
M.Soundrapandian

Are you looking for this

HR Analytics and Daily Business Intelligence for HR

HI All,
Can anyone explain the difference between HR Analytics and Daily Business Intelligence for HR to me?
Thanks!

Oracle Daily Business Intelligence (DBI) for HRMS provides information about your workforce and your human resource management processes. It is a comprehensive reporting solution that provides workforce analysis, and workforce distribution. Built on the proven Oracle Human Resources suite of transactional applications, DBI for HRMS provides executives and Human Resource line managers with a daily view of the enterprise workforce using the HR Management dashboards.
Check
http://download.oracle.com/docs/cd/B25284_01/current/acrobat/115hridbiig.pdf
Oracle Human Resources Analytics provides organizations detailed analysis on HR programs and workforce performance. It integrates
critical data from across the enterprise value chain transforming information into relevant, timely, and actionable insight.
Check http://www.oracle.com/us/products/057353.pdf
Both are for Reporting purpose.
Thanks

Reg 10g As Business intelligence

Hi
Can any body pass me the url which contains installation information for 10g AS BI(Business Intelligence option) for HP-UX PA-RISC (64-bit)
Thanks in advance

You have to download the Oracle Application Server Enterprise Edition software and choose Business Intelligence and Forms installation type in Oracle Application Server 10g (9.0.4).
Regards
Pavna Jain
Oracle Application Server Product Management

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

Business Intelligence for JD EnterpriseOne 8.12

What is the most suitable business intelligence tool that can be easily be used with JD Edwards EnterpriseOne 8.12?
I hope as well that you could also give in detail all requirements (from software to hardware)?
Many thanks.

I reccomend you Oracle BI Enterprise Edition; it's a very good tool; for hardware requirements you need to evaluate your business need, you can start with a 4- core server with 4 gb of ram running Oracle Application Server 10.1.3.X and the BIEE software; that's all you need.
Try to install the software and take a look at the demo data they are a great starting point to understand the power of the software.
Regards

Problem with a DDI Device driver for Solaris 8 and 9 on a Sun-Blade-1500

The problem has to do with dma allocated memory and the little-endian format.
When I copy blocks bigger than 256 bytes to the dma memory, using a uiomove() or bcopy(), the data after the first 32 bytes is swapped around over 8 bytes.
The bcopy from a driver (stack) buffer into the dma virtual memory has the same affect.
So it has to do with the kernel dma allocated memory and the endianess.
When I set the byte order to big-endian inside the ddi_device_acc_attr the data seems to be alright, also with bigger transfer sizes.
My device however needs the little-endian format.
I have the same the same device driver running without any errors on a Sun Blade-150 Solaris 8 for a long time now.
Can somebody please advise me?
Data example,
test data: 0x00,0x01,0x02,?.
64, 128 or 256 bytes blocks:
000: 07 06 05 04 03 02 01 00 0F 0E 0D 0C 0B 0A 09 08
016: 17 16 15 14 13 12 11 10 1F 1E 1D 1C 1B 1A 19 18
032: 27 26 25 24 23 22 21 20 2F 2E 2D 2C 2B 2A 29 28
048: 37 36 35 34 33 32 31 30 3F 3E 3D 3C 3B 3A 39 38
064: 47 46 45 44 43 42 41 40 4F 4E 4D 4C 4B 4A 49 48
080: 57 56 55 54 53 52 51 50 5F 5E 5D 5C 5B 5A 59 58
096: 67 66 65 64 63 62 61 60 6F 6E 6D 6C 6B 6A 69 68
112: 77 76 75 74 73 72 71 70 7F 7E 7D 7C 7B 7A 79 78
512 or 1024 bytes blocks:
000: 07 06 05 04 03 02 01 00 0F 0E 0D 0C 0B 0A 09 08
016: 17 16 15 14 13 12 11 10 1F 1E 1D 1C 1B 1A 19 18
032: 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F <----- ?
048: 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F <----- ?
064: 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F <----- ?
080: 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F <----- ?
096: 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F <----- ?
112: 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F <----- ?
Code example, how I allocate the DMA (kernel) memory:
DDI_STRUCTURE_LE_ACC = Little Endian format
DDI_STRUCTURE_BE_ACC = Big Endian format
static struct ddi_device_acc_attr sse_dma_attr =
DDI_DEVICE_ATTR_V0, /* The version number of this structure */
DDI_STRUCTURE_LE_ACC, /* see above */
DDI_STRICTORDER_ACC, /* How CPU will reference data, default */
The dma definitions for allocating the DMA memory
static ddi_dma_attr_t dmaattr= {
DMA_ATTR_V0, /* version */
0, /* starting address for DVMA */
0xffffffff, /* end address for DVMA */
0xffffffff, /* max transfer count in one cookie */
0x1, /* address restrictive alignment, 1 = byte alignment */
0x7, /* burst sizes */
1, /* min number of byes */
0x00ffffff, /* max number of bytes device can transmit/receive */
0xffffffff, /* upper bound of the DMA engine's address */
1,
512,
0, /* DDI_DMA_FORCE_PHYSICAL doesn't work */
ddi_dma_alloc_handle()
if((ret=ddi_dma_alloc_handle(xsp->dip,
&dmaattr,
DDI_DMA_SLEEP,
NULL,
dmahandle_out)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_dma_alloc_memory, "
"ERROR ddi_dma_alloc_handle status = %d\n",
ret);
return(ret);
if((ret=ddi_dma_mem_alloc(*dmahandle_out,
(uint_t) size,
dma_acc_attr,
DDI_DMA_CONSISTENT,
DDI_DMA_SLEEP,
NULL,
(caddr_t *)&raw_kern_addr,
&real_len,
dma_acc_handle_out)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
"ERROR ddi_dma_mem_alloc status = %d\n",
ret);
ddi_dma_free_handle(dmahandle_out);
return(ret);
This will also init the PCI - IOMMU for
address translation.
if((ret=ddi_dma_addr_bind_handle(*dmahandle_out,
NULL,
(caddr_t)raw_kern_addr,
real_len,
DDI_DMA_RDWR | DDI_DMA_CONSISTENT,
DDI_DMA_SLEEP,
NULL,
&dma_cookie,
&count)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
"ERROR ddi_dma_addr_bind_handle status = %d\n",
ret);
ddi_dma_mem_free(dma_acc_handle_out);
ddi_dma_free_handle(dmahandle_out);
return(ret);
if((ret=ddi_dma_sync(*dmahandle_out,
0,
real_len,
DDI_DMA_SYNC_FORDEV)) != DDI_SUCCESS)
cmn_err(CE_CONT, "ucr_ucr_dma_alloc_memory, "
"ERROR ddi_dma_sync status = %d\n", ret);
ddi_dma_unbind_handle(*dmahandle_out);
ddi_dma_mem_free(dma_acc_handle_out);
ddi_dma_free_handle(dmahandle_out);
return(ret);

I am having the similar problem identified in this thread.
OS: Sun Solaris 10 01/06
Hardware: Sun Blade 2500
PCI Memory card.
Problem: When driver moves more then 40 bytes via PIO from a PCI device memory card, the long words are swapped starting at 40 byte transfer size and greater.
device memory description:
static ddi_device_acc_attr_t sdram_access_attr =
DDI_DEVICE_ATTR_V0, /* Boilerplate value */
DDI_STRUCTURE_LE_ACC,
DDI_STRICTORDER_ACC /* Don't reorder accesses */
The user application does a read call, which goes to xxread. xxread calls physio( xxstrategy, bp, dev, B_READ, xxminphys, uio );
In xxstrategy the transfer is done using
ddi_mem_rep_get8(ucb->ucb_sdram_accHndl,
(uint8_t*) kaddr,
(uint8_t*) raddr,
(size_t) bp->b_resid),
(uint_t) DDI_DEV_AUTOINCR );
PCI Device memory is loaded with incrementing address (8bit), 0,1,2... This is confirmed using a PCI Bus Analyzer.
A read of 36 bytes or less returns:
03 02 01 00 07 06 05 04 ...
A read of 40 bytes returns:
07 06 05 04 03 02 01 00 ...
If I peek 1 byte at a time using ddi_get8(ucb->ucb_sdram_accHndl, ...) I get
00 01 02 03 04 05 06 07
Why are the long words swapped starting at 40 byte transfer size and greater?

Problem with perl Net::Telnet::Cisco for Solaris 10 SPARC

hi all,
I have problem with installing this modules : Net::Telnet::Cisco,TermReadKey-2.30.tar.gz.
I'm trying to install this packages Net-Telnet-Cisco-1.10.tar.gz, and the it notifies me that I need to install before the TermReadkey, I get it from www.CPAN.org -TermReadKey-2.30.tar.gz
and look what I have when I run : "make test" or even "make install"
cc -c -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO -xO3 -xspace -xildoff -DVERSION=\"2.30\" -DXS_VERSION=\"2.30\" -KPIC "-I/usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE" ReadKey.c
sh: cc: not found
*** Error code 1
make: Fatal error: Command failed for target `ReadKey.o'
Please can some one help me. it 's very urgent
thank you in advance

Vipul_Ramani wrote:
only thing you are missing CC does not your current PATH
ADD it again
using export PATH=$PATH:/usr/ucb and try ... do it No, please don't. There is no compiler in /usr/ucb, and it is probably a very good idea to compile without /usr/ucb in your path. /usr/ucb/cc is only a wrapper to extend a very old SunOS compatibility environment onto an existing compiler.
If you don't have the current Sun compiler suite on your machine (go ahead and download it, it's free), then you can use gcc by invoking "perlgcc" instead of "perl" on the module's makefile.
Darren

Quick 10g RAC Installation guide for Solaris

I am looking for quick/step by step guide/article for 10g RAC installation for Solaris

Hi, also you can get more information about the install process into Oracle documentation, please review the next link, there you found extensive information about this process.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/toc.htm
Good luck
Regards,

Download Oracle 10g Client Release 2 for Solaris doesn't work

Hello,
When I try to download 10gr2_client_sol.cpio.gz at this url :
http://download.oracle.com/otn/solaris/oracle10g/10201/sol64/10gr2_client_sol.cpio.gz
I get 0KB file .
How can I do ?

But I can download it.Its space is 623M.

Problems Downlaoding 10g AS Business Intelligence for Solaris Disk 2

Similar Messages

Maybe you are looking for