Problems downloading Code

Hi guys!
I have downloaded the Sap netweaer version for training, I downloaded from the sdn web page, but every time that I want to download the code and I want to see it, I see the code in one line, or like a mess, do you know what can be happening with that? I don't have the word wrap activated, and if i activate the word wrap is the same problem.
Could you please help me?
Thanks!
Gabriela.

Hi Gabriela!
If you are opening in notepad try to go formatting -> wrap text
or this link may help you
[url]http://www.sap-img.com/abap/download-and-upload-your-abap-program.htm[url]

Similar Messages

I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

I'm having problem downloading the complete suit. Only 41% has downloaded and it says this "Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support

Meresianak73703965 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application to reinstall the Creative Cloud Desktop application?

Lightroom 5.3 problems, downloading through Creative Cloud.

Lightroom 5.3 problems, downloading through Creative Cloud. Error 1624
ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid.
MSI Error message:
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624

this is from emma at https://blogs.adobe.com/lightroomjournal/2013/12/lightroom-5-3-now-available.html
I had this same error and managed to get around it by running the .msi file that the CC app downloaded to a temp folder on my own. Steps were:
1. Find the location Adobe_Lightroom_X64.msi (in a a temp folder)
2. Run it and install (serial number was already pre-filled out)
3. Restart the CC desktop app
It then appeared as installed under ‘Your Apps’ and works as usual.

"There was a problem downloading podcast. An unknown error occurred (-50)"

Hello everyone,
When I try to download the latest episode of my podcast feed, I see an exclamation mark next to the episode. When I click on the exclamation mark for more information, I see the following error message:
"There was a problem downloading <podcast_episode>. An unknown error occurred (-50). Please check that the URL is correct and the connection to the network is active and try again."
I was hoping that somebody might take a look at my feed and review the code for any potential problems. It can be found here:
http://www.stereogol.com/audio/wimpy_podcast.php
Important notes:
1. This is not XML code. It is an XML generator created in PHP.
2. This feed used to work fine in iTunes. I had many episodes already downloaded.
3. I began noticing the problem after upgrading to iTunes version 7 and beyond.
4. I know at least 3 other people that experienced the same problem with my feed after upgrading.
5. Upgrading to newer service packs (7.0.2 for example) has not solved the problem.
6. I ran my feed through an RSS validator. It spotted 2 errors: (1) the width of the podcast image and (2) the syntax of the <source> tag. I made corrections but they did not solve the problem. I changed them back after that.
Thanks in advance for any input you can provide.
Pedro

Try fixing up the validation issues...
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
Not promising it will help, but it's worth a shot.

Problems downloading java in firefox

My new forms install 11.1.1.4 will not work in firefox 3.6.16 . It wants to download jre 6.12:
http://java.sun.com/products/archive/j2se/6u12/index.html
However the download is immediately cancelled. If I tell it to resume it, it looks like it was downloaded but it is not there.
This is a problem I've had in recent times downloading anything from oracle and not just java There's something wrong with firefox vs oracle's web site. Sometimes you can use firefox sometimes you can't.
Anyway I got 6u24 installed but the test form does not recognize it because it is not 6.12. So this has got to be an faq how to
change the dependence on 6u12 to 6u24 (or better whatever the current version of java would be). I'm sorry to ask such a dumb
newbie question but if anyone knows how to change it I'd really appreciate it.
this does not work with firefox with 6u24, that's all I know. (the test form does work with chrome and with IE 8. BTW I found that if
you have this problem downloading any java with firefox, it is easier to download it with chrome. I see that chrome is very cognizant of
jre versions and there's a lot of confirming things on sun's website. So you can download and install java via chrome if the other avenues
are not working. (I'm getting a real java headache now. I think I'll work on something else :-)
<HTML>

















<HEAD><TITLE>Oracle Fusion Middleware Forms Services</TITLE></HEAD>
<BODY >
<COMMENT id="forms_plugin_info"
         serverURL="/forms/lservlet?ifcfs=/forms/frmservlet?form=test.fmx&ifsessid=formsapp.19&acceptLanguage=en-us,en;q=0.5"
         plug_ver="clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA"
         appheight="600"
         appwidth="750"
         appcodebase="http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12"
         appname="">
</COMMENT>

<NOSCRIPT>
<OBJECT classid="clsid:CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA"
        codebase="http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,12"
        WIDTH="750"
        HEIGHT="600"
        HSPACE="0"
        VSPACE="0"
        ID="">
</NOSCRIPT>
<SCRIPT LANGUAGE="JavaScript" SRC="/forms/frmjscript/forms_ie.js"></SCRIPT>
<PARAM NAME="TYPE"       VALUE="application/x-java-applet;jpi-version=1.6.0_12">
<PARAM NAME="CODEBASE"   VALUE="/forms/java">
<PARAM NAME="CODE"       VALUE="oracle.forms.engine.Main" >
<PARAM NAME="ARCHIVE"    VALUE="frmall.jar" >
<PARAM NAME="serverURL" VALUE="/forms/lservlet?ifcfs=/forms/frmservlet?form=test.fmx&ifsessid=formsapp.19&acceptLanguage=en-us,en;q=0.5">
<PARAM NAME="networkRetries" VALUE="0">
<PARAM NAME="serverArgs"
       VALUE="escapeParams=true module=test.fmx userid= debug=no host= port= obr=no record= tracegroup= log= term= ssoProxyConnect=no">
<PARAM NAME="separateFrame" VALUE="false">
<PARAM NAME="splashScreen" VALUE="">
<PARAM NAME="background" VALUE="">
<PARAM NAME="lookAndFeel" VALUE="Oracle">
<PARAM NAME="colorScheme" VALUE="teal">
<PARAM NAME="serverApp" VALUE="default">
<PARAM NAME="logo" VALUE="">
<PARAM NAME="imageBase" VALUE="codebase">
<PARAM NAME="formsMessageListener" VALUE="">
<PARAM NAME="recordFileName" VALUE="">
<PARAM NAME="EndUserMonitoringEnabled" VALUE="false">
<PARAM NAME="EndUserMonitoringURL" VALUE="">
<PARAM NAME="heartBeat" VALUE="">
<PARAM NAME="MaxEventWait" VALUE="">
<PARAM NAME="allowAlertClipboard" VALUE="true">
<PARAM NAME="disableValidateClipboard" VALUE="false">
<PARAM NAME="enableJavascriptEvent" VALUE="true">
<PARAM NAME="MAYSCRIPT" VALUE="true">
<PARAM NAME="digitSubstitution" VALUE="context">
<PARAM NAME="legacy_lifecycle" VALUE="false">
<PARAM NAME="JavaScriptBlocksHeartBeat" VALUE="false">
<PARAM NAME="highContrast" VALUE="false">
<PARAM NAME="disableMDIScrollbars" VALUE="">
<PARAM NAME="clientDPI" VALUE="">
<PARAM name="applet_stop_timeout" value="800">
<COMMENT>
<EMBED SRC="" PLUGINSPAGE="http://java.sun.com/products/archive/j2se/6u12/index.html"
        TYPE="application/x-java-applet;jpi-version=1.6.0_12"
        java_codebase="/forms/java"
        java_code="oracle.forms.engine.Main"
        java_archive="frmall.jar"
        WIDTH="750"
        HEIGHT="600"
        HSPACE="0"
        VSPACE="0"
        NAME=""
        serverURL="/forms/lservlet?ifcfs=/forms/frmservlet?form=test.fmx&ifsessid=formsapp.19&acceptLanguage=en-us,en;q=0.5"
        networkRetries="0"
        serverArgs="escapeParams=true module=test.fmx userid= debug=no host= port= obr=no record= tracegroup= log= term= ssoProxyConnect=no"
        separateFrame="false"
        splashScreen=""
        background=""
        lookAndFeel="Oracle"
        colorScheme="teal"
        serverApp="default"
        logo=""
        imageBase="codebase"
        recordFileName=""
        EndUserMonitoringEnabled="false"
        EndUserMonitoringURL=""
        heartBeat=""
        MaxEventWait=""
        disableValidateClipboard="false"
        allowAlertClipboard="true"
        enableJavascriptEvent="true"
        MAYSCRIPT="true"
        digitSubstitution="context"
        legacy_lifecycle="false"
        JavaScriptBlocksHeartBeat="false"
        highContrast="false"
        disableMDIScrollbars=""
        clientDPI=""
        applet_stop_timeout="800"
>
<NOEMBED>
</COMMENT>
</NOEMBED></EMBED>
</OBJECT>

</BODY>
</HTML>Edited by: lake on Apr 18, 2011 1:10 PM

Oh a simple fix. You merely have to find the formsweb.cfg file which in 11.1.1.4 is something like:
c:\Oracle\Middleware\user_projects\domains\forms\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg
change these 3 items to as follows:
jpi_classid=clsid:CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA
jpi_codebase=/forms/java/jre-6u24-windows-i586.exe#Version=1,6,0,24
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_24
you could also change the download so they are not downloading the wrong thing:
jpi_download_page=https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=jre-6u24-oth-JPR@CDS-CDS_Developer
I probably missed a few.
(But does this mean that every time there is another version of java I'm going to have to change this file? Actually I though mozilla was
going to run the latest version of java if you specified one that was earlier. There's just no telling what that program is going to do.

For some reason I'm getting problems downloading apps. Even free ones. Keeps telling me payment declined. I'm using my card btw. Anyway I can sort this out? Getting really mad now! Thanks

Need help. I've only had my iphone4s for over a week or so and had no problems downloading free apps and purchasing apps using my bank card. I haven't brought any apps for 2 days now and I'm trying to update one of my apps I've purchased and it keeps saying billing details wrong and notice that my security code is not there so I've put it in and then it comes up with my payment has been declined. I have no reason as to why this is happening as I have money in my account and why exactly is it saying that when I'm only updating the app. I've even tried to get a free app and again it says the same. I've tried deleted every detail and re-doing it but nothing. I don't know whether it's to do with when I synced my iPhone on my laptop 2 days ago and my laptop died so it didnt sync completely so maybe its to do with that or to do with my bank. Can someone tell me what I can do next as I'm getting rather frustrated and so close to throwing the phone across the room. Thanks. :D

Fair enough. The only reason why I asked for help is simply because I have never had to use my bank details to download a free app or to update an app. Not only that i have no idea how to work this phone. So I was concerned. And thought that the matter could be easily rectified hence why I posted this. Obviously if I had tried to purchase an app and I didn't have no problems in downloading and updating an app that Ive purchased or downloaded for free already then I would definitely know for certain that it would have to be with my bank. Same way you go to "a shop" and is given something for free, your not going to be concerned when someone asks for your bank details? Your going to investigate right? Ask questions? And thats exactly what im doing. And as for your rude/sly comment about throwing my phone, I don't expect you to care. I was simply trying to add humour. Thanks for your help anyway.

HT201210 Having trouble restoring my ipod touch 4 gen. When i click restore i get an error message saying that " problem downloading software for the "ipod owner's ipod"

When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.

There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Ipad ios 4.2 update error - "there was a problem downloading the software..

Hi All -
Super excited to get 4.2.1 up and running. I had the buggy beta of 4.2 running on my iPad but now when I try to restore my iPad to get the most recent version of 4.2.1 running, I get this error:
"There was a problem downloading the software for the iPad. The requested resource was not found.
I've restarted iTunes and the computer and I'm still getting the same error. I've looked for the .ipsw file online but can't seem to find it anywhere. It's not an Apple's Support/Downloads section either.
Anyone know where to download the new update? I'm dying without Airplay, Airprint and so on not working here.
Thanks!
CH

Hi,
this should have been addressed by Apple I guess, but luckily we found out the solution in the company. Yesterday all our iPads (with 4.2 beta iOS for dev) stopped working, displayed the Connect to iTunes scrren and throw errors when trying to sync like 'The requested resource was not found' (when tried to Restore) and Error Code: 0xE800005D (when iTunes first just tried to reinstall apps).
Here is what we did to reanimate all four iPads in the company:
First you need to enter Recovery mode with the iPad, then recover the iOS software (probably the latest). Here is how to do it:
1) Fire up iTunes on your computer, and plug in the USB cable in the computer, but not in the iPad!
2) Do a hard reset, ie. press and hold down Sleep/Wake and Home buttons simultaneously, don't bother with the switch off prompt, just keep pushing the buttons.
3) When the screen goes blank, but before the Apple logo comes up, release the Sleep/Wake button and quickly plug in the USB into the iPad too. Keep pushing the Home button, until the Recovery mode dialog in iTunes comes up.
4) Act according to the prompts, and wait for the image to download and extract (can be 10-15 minutes depending on your internet connection, the image is some 550Mb).
That's it, you can safely restore your apps and other content to your recovered iPad.
Hope this helps,
David

Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very much

Mucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Problem downloading file's from a .php cart

Having problems downloading files form a php based cart software, but Firefox works fine and also on a PC they download on Explorer fine, is there a setting on Safari to fix this or is there another way around this.

Welcome to Apple Discussions
Usually, this type of content doesn't work on Safari due to a PC mentality when coding the site. Here, Firefox etc. are better able to read this code.
Also, a good reason for having alternate browsers from which to choose.

Problems downloading Photoshop elements 11 onto Mac running snowleopard

please can anyone help me with this problem
entered the redemption code on adobe website, and then received the Serial Number for photoshop elements 11
then clicked on the download file, which sent me to Arvato link for zip file
downloaded the zip file, but it then will not open, so can't complete the download.
what hapened to buying software on Discs !!
i've now wasted 2 hours trying to sort this out, so would greatly appreciate some advice
thanks
Reply
|Edit
|Delete
|

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial number.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

TS1424 Is anyone else having problems downloading "Haywire"??

Is anyone else having problems downloading "Haywire"?!

Below is the solution that worked for me ...
I actually figured it out. If you just go directly to iTunes, open the Redeem Code page, and input your promotional code without ever going to the website it tells you to, it works splendedly. Not sure why letting the website open iTunes screws it up.

Problems downloading iPhone SDK

I just recently signed up for an Apple Developer account and am trying to download the iPhone SDK. When I start the download it never actually downloads and eventually times out. My problem is also described in these threads:
http://discussions.apple.com/thread.jspa?messageID=11033796&#11033796
http://discussions.apple.com/thread.jspa?messageID=11000681&#11000681
In those threads I have tried the fixes and still been unable to accomplish the download.
I have tried on computers running Vista and Windows 7 and on my Mac running Snow Leopard.
On Windows (either one) after clicking on the link it comes up with the file information, I click save, and then the file download dialog opens. No transfer rate ever appears and neither does any indicator that I have downloaded any of the file. Eventually it times out.
On the Mac I tried downloading with Safari. Safari gets 1.1kb of the file and then tells me it will be many, many years before the download completes and eventually errors out that the server has not responded.
I currently have a 7 mb DSL connection. I am able to download any other file in the developer release section including X-Code and the Mac SDKs. In fact I have installed both X-Code and the Mac SDKs already and they were fine.
Other things I have tried:
1. Multiple browsers on Windows (Firefox, Chrome) with similar errors.
2. Hooking straight into the modem (normally hooked into wireless N router)
3. Disabling the modem firewall and Windows Firewall (Macs firewall is off by default. Is that normal?)
4. using the trick from the other threads of changing http to https. For me it makes no difference.
5. My work computers (with the same ISP) have no problems downloading the file. However with no disc drive, and with the USB ports disabled that doesn't really help me much. I only tried to see if they would work with my login since another thread suggested some users were being cut off.
Something else I do not understand is why I have to download the SDK with X-Code. Since I already have the latest version installed it seems like Apple could be saving on bandwidth there. No big deal but just kind of strange.
Any help anyone could give me would be appreciated.

Alright it turns out it was actually the DSL modem. Apparently the last major firmware update causes it to have problems downloading specifically from Apple servers. Both iTunes HD content and large downloads from Apple servers are unable to be downloaded. SD content, music, and downloads under roughly 1 gb are unaffected.
The modem is the 2Wire 2701. I actually managed to find an older modem that worked and downloaded the SDK fine. At this point I am looking around for a new modem just so in the future I will be able to download updates etc.
Also after a lot of searching it turns out that Qwest doesn't cap their service at all. Even the one report with a limit I turned up turns out that it was either true only back then or was part of a trial that ended. At this point Qwest does not cap at all.
Take a hint if you are going to respond to a post try to be helpful. If you are not actually going to help troubleshoot don't both.
But you did use an emoticon. So at least you were useless . . . with style.

ITunes 7.0.1(7): Problems Downloading Movies from iTunes Store

Prior to installing the iTunes 7.0.1(7) upgrade, I had no problems downloading movies from the iTunes store. After I noticed that there appeared to be rate-limiting on the inital movie that I purchased, I simultaneously downloaded three other movies and watched one of the movies while they were downloading.
No problems with downloading multiple movies but severe problems with using iTunes 7.0.0 as a viewer. An inadvertent movement or click of the mouse resulted in the video portion of the movie disappearing. To solve the problem, I created symlinks in the QuickTime Player's ~/Movies directory to the downloaded movies. Using QuickTime as a viewer was a significant improvement over iTunes.
Upgraded to iTunes 7.0.1(7) when it was released. Today I discovered that the release has significant problems downloading movies.
After the initial download of the movie to /private/tmp, the iTunes download panel displays a message stating that it is processing the file. One would assume that it is inserting the chapter bookmarks and transferring it to the ~Music/iTunes/iTunes Music/Movies directory.
Not so. Its downloading the movie a second time. The processing file message is displayed a second time followed by a pop-up window reprting that the file is corrupt with an error code of 10008. Looks like one of Window's infamous network error codes. Wonder what it's doing on a Mac?
Enough of my diatribe. Are others seeing this? Do you have a "work around" or solution to the problem?
PowerBook 17, PowerMac G5 Mac OS X (10.4.8) iTunes 7.0.1(7)

I did run Disk Utility after reporting my problems here and to the iTunes Store. The "Check Permissions" scan found two iTunes with the incorrect permissions. As the permissions were correct prior to the upgrade, I presume the executable permission flags were turned on during the upgrade. Repaired the permission problems.
Also, I performed a reboot as was mentioned in a discussion of a slightly different problem. I was able to download one of the movies. The second failed about half-way through the download with a 9006 error.

How to Fix BlackBerry App World Identity installation fail problem: (Error Code 80003)

Hello To all you kickass BlackBerry users!
I have compiled a web site that addresses the issue if the ID Verification problem (Error Code 80003) when attempting to use AppWorld,
It seems that it is mainly a Vodacom issue in South Africa, but it should also work with other service providers that have a similar problem. RIM and Vodacom are aware of it and are looking into a solution.. In the mean time you can fix your problem step by step here: http://www.blackberryapps.byethost17.com/
Regards
BB Solutions
Feel free to send a friend request (pin on the site) to contact me personally for any queries you may have.

Blackberry Identity sometimes gives a problem to download using BIS.
you can go to manage connections, switch mobile network off, find a wifi hotspot, try updating the identity using wifi, or enter your network provider's apn settings in menu > options > advanced options > tcp/ip, enable the apn, enter service provider apn username and password, save hard reset , and download identity, just remember to undo the changes afterwards.

Problems downloading Code

Similar Messages

Maybe you are looking for