Problems downloading photos from iPhoto to iPod 5G classic

Until recently I had no problems downloading my photo library to my iPod (~250 photos). However, the last couple of groups of photos I've gotten I cannot transfer. I get an error message that reads "The iPod cannot be synced. The disk could not be read from or written to." My last 3 rolls do not transfer to the iPod, although all the other photos do as well as all songs, movies, calendars, etc. Everything else is OK just the last 3 photo rolls. 2 of the 3 problem rolls were gathered from emails, but so were others that load fine. The last roll was downloaded from the BART website and will not transfer.
Anybody know what's up with this?

Thanks again TD
I will check on the formating when I get home, I am pretty sure that I haven't used any no-ascii characters, but will double check.
Before I download iphoto library manager, I just wanted to report an interesting experiment that I tried last night that may point in a different direction:
I keep my iphoto library on a second internal HD, so I thought I would just try making a complete copy of my iphoto library onto my desktop. Once I did this, I started up iPhoto with alt and choose the desktop version of the library and all worked perfectly, my iphoto albums showed instantly in my photo tab in itunes when I selected to sync with iphoto.
My next move was to rename my old library and then copy my desktop version into the folder where the old library is. Once I did this the problem was back again.
I have no reason to believe that it is the second disc that is causing the problem, as that is where I have always kept my itunes and iphoto libraries and they have worked without problem.
(As I am writing this, it dawned upon me that I missed one important test, I should have tried the old library after I had renamed it, but stil in the same place.)
I am now suspecting that the problem may be linked to an external drive that I addded to the system at Christmas. This was a WD My Book which I use for backup, the link being that I use the software that came with it to do autobackups that includes my iphoto library folder. I am wondering if this software does something to the folder.
Thoughts welcome.
Duff

Similar Messages

  • Problems syncing photos from iphoto to ipod via itunes

    I have been having some difficulty getting my itunes to sync iphoto contents to my ipod. This worked fine for ages, but has just stopped working. I can sync photos from a standalone folder. Following a discussion on the ipod forum (for full details see: http://discussions.apple.com/thread.jspa?threadID=1872524&start=0&tstart=0 ) we have established it is something in the iphoto library that is causing the problem. A new library works fine, but switch back and itunes does not recognise it. I am hoping that someone here can help me identify what could be causing the problem.
    Any thoughts welcome.
    Duff
    ps I have also posted this in the iphoto forum, see here: http://discussions.apple.com/thread.jspa?threadID=1876616

    Resetting your iPod puts the iPod's software in factor default. It doesn't erase anything. Restoring the iPod erases your iPod's content and puts a fresh copy of the OS on it. Restoring is a more extreme way to solve a problem. Use restore if a reset doesn't work. If a restore doesn't work, then its not likely that a reset would help. Sorry for the late reply, I was busy with classes. Cheers mate.

  • Problem emailing photos from iPhoto after installing OS 10.5.1

    Since installing Leopard I have had problems emailing photos from iPhoto. I can send from my laptop to another Mac without problem BUT when I try to email pix from iPhoto to a PC user or to post on my Google Group board it only sends the 'title' I gave it in iPhoto or the 'PC134567.JPG' the camera assigns it. I have tried exporting and attaching to emails but that doesnt work either .. at least not all the time. AND when I do send them from iPhoto to my office PC they arrive NOT as an attachment but are embedded in the email message .. seriously what the heck is going on and why is this not working the way it used to pre-OS 10.5.1? What changed? How can I make this work the way it used to?
    Thanks for reading and hopefully solving my problem

    Thank you again .. I got home and immediately tried the fix you suggested .. sent a 'test' email and it worked perfectly.

  • How can I download photos from iphoto on my imac to my new macbook?

    How do I download photos from iphoto on my imac to my new macbook?

    Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • How do I download photos from iPhoto on my iMac to my iPad?

    How do I download photos from iPhoto on my iMac to my iPad?

    When your iPad is connected, select your iPad under devices in iTunes. There will be a photos tab, and you can either sync everything or choose certain events/albums etc

  • How to download photos from computer to ipod nano 2GB

    I am a new ipod owner. I've been trying my best to follow instructions from features guide but I am unable to understand how to download photos from computer to ipod. When I open iTunes I don't find the iTunes Source list nor do I see the Options button. Can someone please guide me through this process. Thanks

    See:
    iTunes: Syncing media content to iOS devices and iPod

  • I am having problems downloading photos from my camera to iphoto 11

    I am unable to download photos from my sony cybershot DSC-W170 and my Panasonic Lumix DMC-FZ30 to iphoto11. The problem started when the colour wheel started spinning when iphoto opened after I switched on either camera and the programme became unresponsive. Subsequently when ever I then tried to open iphoto the colour wheel span and iphoto didn't respond, force quit the only way out.
    After this happened the first time I rebuilt my library from timemachine (not the quickest process with around 9000 images), iphoto then opened okay and I could view libraries again.
    I then downloaded the images directly from the camera sd card to my desktop and tried to drag the images into iphoto one at a time this worked but as soon as i tried to import the whole roll, the colour wheel popped up and iphoto became unresponseive again but I could view my libraries at least.
    I then read about deleting the library cache which I did and restarted my mac (imac core duo 2ghz, running 10.6.8) I then tried to download from the sony cybershot again and I here am back at the start, with the colour wheel and iphoto not responding, I have just force quit and I can't open iphoto. Help!

    What exactly happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod

  • Problem downloading photos from iPhone to iPhoto on MacBook

    I can't download photos from my iPhone 5 to iPhoto anymore. It comes up with an error message that says 'The following file could not be imported. (The file is in an unrecognized format.)' My software is up to date. The photos were taken on my iPhone, however there are also some photos that I have saved from other people who sent them as a text message. How can I save my photos please without loosing them? I have tried to save one image only, not all of them, and nothing work. Suggestions appreciated. Thanks.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • Problems downloading photos from the camera to iPod

    Last week I tried to download photos from the camera to my 60 GB iPod.
    I had almost near 150 pictures (jpg) but something happened. The iPod (or the iPod Camera Connector) isn't able to transfer more than 60 photos (aprox.).
    For bigger amounts, the tranfer speeds up and after finishing, I can't find the photos and I can't transfer photos anymore or listen to music o play videos.
    Is there any restriction concerning photo transfer? What could be the problem?
    Thanks.

    As a matter of fact. After giving my camera a complete charge, I have had
    no more problems
    That is why a card reader is so useful. You do not have to wait for the camera to charge and avoid the kind of errors above.

  • Problems downloading photos from camera to iPhoto

    All -- I'm running iPhoto 6 on a Mac Mini with the latest version of OS10. I have a Canon PowerShot G3 and shoot 4-megapixel JPEG photos, and AVI movies. Downloading photos from the G3 to the Mac is slow, and deadly slow (as is 15 minutes or more) when there's an AVI movie or two mixed in with JPEGs. I've had to abort several downloads when they just flat out stalled.
    Today when downloading a total of 58 JPEGs and 6 AVI's I got an error message - "unreadable files". 51 JPEGS and 3 AVIs downloaded fine. 7 JPEGS and 3 AVIs didn't download. The error message says "The following files could not be imported. They may be an unrecognized file type or the files may not contain valid data."
    Any help you all can offer would be much appreciated.
    Greg

    Isn't technology great? The more you learn, the more you need to learn more.
    Have you viewed the iPhoto 6 tutorials? http://www.apple.com/ilife/tutorials/iphoto/new.html The section on Organizing, "Add Ratings, Titles and Comments" could be helpful.
    Click on the little blue i on the lower left of the iPhoto window, and the Info Panel should pop up. Select a picture, and it shows the info for it. Select a film roll's name, and you can see and edit the info for the whole roll. Click on the roll's title in the info panel to highlight it and you can type in a new name. You can edit the date of the roll this way, and it will affect how your rolls are listed in the library. The dates "from" and "to" are generated by the dates of the items within the roll. If you type comments about a roll they will be shown below the roll's name in the library when the roll is closed. I like to keep rolls that match my camera cards, but they can be very large. So I use comments to list the events contained in the roll, so I know which roll to open when I want to find a specific photo.
    If you view your library in Film Roll view then you see the rolls' names with a little triangle to the left. As in the Finder, clicking on the triangle to make it point right conceales the contents of (closes) an item, while clicking on it to turn it down reveals the items inside the item.
    Now the hard part - all those dates. If the dates and times are totally wrong, I would use iPhoto's Batch change to correct them. However, only iPhoto will recognize this date change, because it won't correct the real problem, which is that the EXIF info is wrong for those pictures. There are ways of changing EXIF info which involve downloading other programs, running batch changes, and re-imprting into iPhoto. I've never done it, but I searched the iPhoto 6 forum for "EXIF rename file info" and restricted by user name Old Toad. Try this thread http://discussions.apple.com/thread.jspa?messageID=1734147&#1734147 and note Old Toad's last post about PhotoInfo.
    If you don't mind about the EXIF, then you can just redate them within iPhoto. Select a series of photos from the same date, then go to the Photos menu and select Batch Change. Select Set Date. Type the correct date and give a time for the first picture. To force iPhoto to maintain the same order within the series, check Add 1 minute between each photo. This way, although the times will be wrong, at least they will have the correct chronological sequence. (Or type in the times manually after the batch change if the order is not correct.) I always do this with rolls of actual film I get processed at a store. The photo CD I get never has the correct dates or times, so I add these to at least get them to display in my library in the correct order. As far as I know, you have to run a seperate batch change for each date that you want to change to. Unless you have a series with one photo for each day and wish to check "Add X Days between each photo."
    The highest rated member (very talented) of the iMovie forum, Karsten Schluter, still tells people he's just an amateur. We all learn what we need when we need it. I am grateful for the support on these forums. Let me know how it goes.

  • Problem transferring photos from Iphoto to my iPad 2

    Hi, I tried to synchronize my photos from iPhoto in my iMac to my iPad 2 using iTunes and got the following alert message: " IPad from Rene could not be synchronized. Unable to find required file."
    Can somebody give me some advise to solve this issue?
    I restored it to factory and continue having the same message.
    Best Regards
    Rene

    The problem is probably on your iMac not your iPad.
    Here are some instructions on how to fix:
    1) Close iphoto and itunes
    2) Find the iphoto library in finder, most probably located in your users folder under pictures.
    3) Control click on iphoto library (might be named diferently) and choose show package contents
    4) Delete the folder caches and ipod photo cache.
    5) Restart iphoto
    6) Restart itunes
    if itunes asks that the library is linked with another ipod, say yes to the warning to re sync with your ipod/iphone

  • Problems "pulling" photos from iPhoto into iMovie....

    I am trying to create a movie with a combination of movie clips from my DV camera and photos from iPhoto (on my G5, 2ghz iMac). Movie clips are no problem. The problem occurs when I try and "pull" in more than 20 pics or so from iPhoto. I am trying to "pull" them in via "Media" and then "Photos". If I try and pull in a bunch, say more than 20, iMovie quits and I have to start all over again. Is this a bug and is there any workaround?

    I actually think this is one area where iMovie6 does a lot better than iM5. My machine used to choke all the time when I would try to drag a whole bunch of photos into timeline. The reason is that whenever you bring in photos like that, they have to be rendered, so trying to render a whole lot of stuff is going to be time dependent based on your processor, memory etc. (and the settings you have for timelength, ken burns effect etc.) iM5 tried to render everything simultaneously and would always lock up on me. iM6 appears to render one at a time so it eventually finishes, but then I stopped trying to import large bunches of photos after my iM5 experience so I can't say where the limit is.
    I've gotten so fond of playing with the ken burns effect and setting the start and stop points that I pretty much do all my images one at a time now because it can render the last one while I'm picking settings for my next one.
    Imac G5   Mac OS X (10.4.3)   1Gb Ram

  • Problems exporting photos from iPhoto even after trying earlier suggestions

    I've done this before with no problem.
    I want to export 158 photos from iPhoto 11 on my iMac (OS 10.9.4) so I can put them on a 2GB SD card (MS-DOS FAT16) for a digital frame. With the SD card in the slot on the back of the iMac, I exported the files to that disk. I got an "Unable to create /Volumes/[filename]" error. Went ahead and deleted that pic from the album I'd created for export but got the error for a different file.
    Checked through the iPhoto forum and found others had similar problems. Terence Devlin suggested exporting to a folder on the desktop and dragging to the card. When I try that, I get an "Item [filename] can't be copied because there isn't enough free space" error. (This despite the fact that the Finder info shows 14.7MB for all the files and it's a 2 GB card.) I click "OK" in the error window and am told the 158 items are being copied. However, when the process is complete, only two files appear on the card in the Finder and both of them show they're empty (i.e., Size: Zero bytes).
    Tried reformatting the card. Tried plugging an external card reader into one of the USB ports on the iMac. Same problem.
    Thoughts?

    the general answer is to export the photos to a desktop folder and then drag that folder (not the photos in it) to the proper location on the unlocked SD card - FAT formatted volumes have a very low limitation on the number of lies on them at the root level hence the necessity to put the files in a folder and drag the single folder to the FAT volume
    L:N

  • Problems syncing photos from iPhoto

    I am having a big problem syncing phtos/albums from iPhoto to my iPad2. 
    for some reason I have an album in iphoto that only wants to sync half the photos, the ones that I actually had to edit a little, all I did was rotate the pictures, but those ar the only ones that want to sync.  I've quit out of iphoto, shut off the ipad and rebooted, and still when I sync none of the other photos in the album show up.  I even clicked off the " sync photos from iphoto" box and cleared all the photos and then reloaded every photo again and still only the "editted" photos show up in that one particular album, all my othr albums are showing up with no problems.
    So... is this an iTunes or iPhoto issue?????  I came here because i am using iTunes to sync

    problem solved using this thread...
    https://discussions.apple.com/thread/4875972?start=0&tstart=0

  • Problems downloading Photos from 8900 smartphone

    Hi
    Im having problems downloading photos stored on an SD card from my BB to PC.
    Ive looked at the other posts and turned on mass storage accordingly.
    When I connect my BB to the PC using the USB link, the BB informs me the mass storage mode is being activated and requests a password, which I enter.
    However, the BB does not appear in the Devices list in the My Computer screen on the PC.
    Does anyone have ideas as to the problem??
    I have lots of photos on there, so want to avoid sending dozens of mails to get the photos off the BB.
    Thank you

    Hi stuart_fraser,
    Have you checked the Windows Device Manager to see if the BlackBerry and/or Mass storage device shows up?  Also, the BlackBerry may show up in "My Computer" as a removable storage device.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Error while creating PR, 'No Procurement defined for material 150'

    Hi, I am trying to create purchase requisition. I am getting the following errors, 'No Procurement defined for material 150' and 'Enter G/L Account'. Please help me to correct these errors. Thanks in adv. Regards, Eswar Edited by: Eswar K on Jan 7, 2

  • I have a problem with Photoshop Elements 11 Organizer

    When I load images from my camera or a folder from e:\ drive into an existing or new e:\drive folder, Organizer catalogues them in an i:\ drive. I don't actually have an i:\ drive and when the images are "missing". Organizer starts a seach to try and

  • TV as PC monitor Windows 7

    Hello, I am using a UN32EH5000F 32'' TV as my monitor. Its connected by a HDMI cable with a DVI adapter on my PC.  My Gpu only has DVI slots. Its great as a monitor, but I have been having signal issues. The TV has been arbitrarily losing signal. Thi

  • Passing parameters within the ctrl:method/

    I am using the method tag of the controller namespace. Dose it have a child which will allow you to page/pageEvent parameters? <ctrl:method class="SomeClass" method="someMethod"> <..../> </ctrl:method> If this is possible, where can I review the docu

  • JSTL fails silently

    I am a complete newbie to jstl. I'm working on a forEach loop in a jsp page and the code I want to call is not being called. I have something like this: <c:forEach items="${Access.allThings}" var="thing">... This corresponds to the Access.getAllThing