Problems downloading pre-release of Robbie Williams Rudebox

Has anyone else had problems downloading Rudebox by Robbie Williams after being notified that the pre-release was ready to download?
The movies and Digital booklet downloaded fine, but the music files stop with an error "An unknown error occurred (-50)."
Craig

Hi Kylelee,
Sorry for the belated reply, been really busy and haven't had a chance t report back.
I am unfortunate enough to own a PC too, and when I tried connecting to iTMS from the PC, it worked fine.
I received an email from iTunes Music Store Support:
1. Make sure you're using the latest version of iTunes, then choose "Check for Purchases" from the Advanced menu.
2. Enter your account name and password when prompted, then click the Check button. Your purchase should begin downloading. If you receive an error message while downloading, try again after turning off any firewall or web-accelerator software that you may have installed.
This article provides more information about resuming interrupted downloads:
http://www.info.apple.com/kbnum/n93015
But by this time I had my music.
Hope this helps

Similar Messages

Problems Downloading pre-purchased items

I am having some serious problems downloading items that I have previously purchased or pre-purchased. The problems started about 2 weeks ago, when I purchased a few tv-shows and had to stop downloading in the middle of the download. I came back later that night and tried to go to my account, clicked on where I had pending downloads, but it kept timing out. I got an error message that said:
UNABLE TO CHECK FOR PURCHASES - NETWORK TIMED OUT
make sure your network settings are correct and your network connection is active, then try again.
I had no problems with my network settings, as I was able to purchase and download a cd with no problem.
I also today was prompted to download 2 cd's that I had pre-purchased, and clicked yes to begin the downloads. 30 seconds later, I got the same error message. I now have 38 pending downloads, and I am unable to get them to download. In the meantime, I am currently downloading another tv-show that I purchased today, and am having NO PROBLEMS DOWNLOADING THIS! So this obviously shows I am not having a network connection problem. Right?
I have been emailing apple support and i-tunes support for 2 weeks now, with out any resolution. Is there anyone out there experiencing the same problems? Anyone have any insight on how to fix this?
I actually tried to re-purchase a couple of items that are stuck in my pending and not able to download. This was unsuccessful as i-tunes realized they were already purchased and were pending downloads, so it wouldn't allow me to re-purchase them. It also wont allow me to download them, so what gives?
Any help or info would be greatly appreciated. Thanks!

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Pre-release installation fail.

I've downloaded Pre-release file: AdobeInDesign10-Mul_x59.dmg and can't get past the Welcome screen. I don't have a serial number or subscription # for my CC acount, and don't want to install a trial if I don't have to. Through Live Chat I was told this is a technical problem and to try asking here.

LindaJHR any inquiries regarding the pre-releases of Adobe software titles should be addressed in the applicable pre-release forum.

Trouble Downloading PrE? This Might Help

If one is experiencing problems download PrE from the Adobe Web site, then perhaps the direct download links, provided by ProDesignTools (a trusted Adobe partner), will get around some of the issues: http://prodesigntools.com/
There is also a link for PsE, as well.
Good luck,
Hunt

ATR,
The language that you use in your post regarding "some users.....Akamai Download Manager or Adobe Download Assistant...." appears to be from the link that you cited for a download alternative.
No. Those experiences are from years on the Adobe Forums, for various products. They are based on dozens, if not hundreds, of issues that users have come to the forums with.
There are two different download schemes, but that will depend on exactly what program one is downloading. If you download many programs, you will get the Akamai Download Manager, but if you download some others, like Adobe PrPro CC, you will get the ADA (Adobe Download Assistant).
Also, you seem to have an issue with ProDesignTools. Is that correct? Why?
Were those download links from other sites, I would not have posted, but I have worked with ProDesignTools for many years, as has Adobe. They usually have updates on various Adobe programs, directly from Adobe, before even the Adobe Staff has that info. They have also been a great repository for Adobe "trial" downloads, when those are no longer available from Adobe. They have saved many users tons of grief, and are a "Trusted Supplier" by Adobe. They are also active in the "Adobe Influencer" program.
Hunt

Robbie Williams pre-ordered videos do not play

Has anyone else pre-ordered the new Robbie Williams album released today that came with two videos (interview and "Tripping") and been able to play them successfully?
They downloaded fine into iTunes for me but I could not play them through iTunes. I then copied them from one computer and added them to another of my authorized iTunes computers and the videos fail to show up in my library.
Attempts to play it back using Quicktime also fail. I am using Windows XP-based operating systems with the most recent version of Quicktime installed.
Any help would be appreciated.
Thanks,
-paul

Welcome, Paul. There ar some other posts over in the Music Store discussions about this video being bad.
Email iTMS from here, go to the bottom
http://www.apple.com/support/itunes/musicstore/songs/

903 pre-release is here but if you had downloaded it before 9/25...

9.0.3 pre-release is officially posted at
http://otn.oracle.com/software/products/bib/
You will need the 9.2.0.1.0a patch for the database.
(Located at http://otn.oracle.com/products/bi/9iolap.html)
Only the Sun Solaris version is available at the moment.
If you had downloaded the 9.0.3 pre-prelease of BI Beans before Sept 25, please remove it, and download/install the 9.0.3 pre-release again.
Thanks

9.0.3 pre-release is officially posted at
http://otn.oracle.com/software/products/bib/
You will need the 9.2.0.1.0a patch for the database.
(Located at http://otn.oracle.com/products/bi/9iolap.html)
Only the Sun Solaris version is available at the moment.
If you had downloaded the 9.0.3 pre-prelease of BI Beans before Sept 25, please remove it, and download/install the 9.0.3 pre-release again.
Thanks

Sp9 / pre-release / problem with jsp tags

 WLS 5.1, sp9 pre-release, solaris 2.7, WLCS 3.2
 JSP compile fails with the exception...
 weblogic.servlet.jsp.JspException: (line -1): Error in tag library
 at: 'wl':
 The Tag class 'weblogicx.jsp.tags.CacheTag' has no setter method
 corresponding to
 TLD declared attribute 'async', (JSP 1.1 spec, 5.4.1)
 at weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:138)
 at weblogic.servlet.jsp.StandardTagLib.processTag(StandardTagLib.java:264)
 at weblogic.servlet.jsp.StandardTagLib.processTagElements(StandardTagLib.java:146)
 at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:125)
 at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:95)
 at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:3873)
 at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:3623)
 at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:3484)
 at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:1817)
 at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1658)
 at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1548)
 at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:888)
 at weblogic.servlet.jsp.JspParser.doit(JspParser.java:69)
 at weblogic.servlet.jsp.JspParser.parse(JspParser.java:125)
 at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:109)
 at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:242


 It could just be me - I an un-jarred a version of weblogic-tags-510.jar where WLS
 could find it.
 mike
 Kumar Allamraju <[email protected]> wrote:
 >Yes, my JSP is referring the tag libs. I 'm using counter example given
 >in
 >examples/jsp/tagext/counter directory
 >
 ><NT Performance Pack> NATIVE: created IoCompletionPort successfully.
 >I
 >oPort=0x000001d4
 >Sun Apr 01 12:44:00 PDT 2001: <WebLogicServer> WebLogic Server star
 >ted
 >Sun Apr 01 12:44:40 PDT 2001: <NT Performance Pack> Allocating: '2'
 > NT reader threads
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: init
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > verbose initialized to: true
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > packagePrefix initialized to: jsp_servlet
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > compileCommand initialized to: c:/java/java122/bin/javac.exe
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > srcCompiler initialized to weblogic.jspc
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > superclass initialized to null
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > workingDir initialized to: D:\releases\510\myserver\classfiles
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > pageCheckSeconds initialized to: 1
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: Using
 > Encoding : ISO-8859-1 when constructing PrintWriter instead of Servle
 >tOutputStream
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: initi
 >alization complete
 >Sun Apr 01 12:44:42 PDT 2001: <ServletContext-General> looking for
 >taglib uri /counter.tld as resource /WEB-INF/counter.tld in Web Applic
 >ation root:
 >Sun Apr 01 12:44:43 PDT 2001: <ServletContext-General> Generated ja
 >va file: D:\releases\510\myserver\classfiles\jsp_servlet\_pagehits.jav
 >a
 >Sun Apr 01 12:44:45 PDT 2001: <ServletContext-General> file: init
 >
 >
 >what's the change number you get from weblogic.Admin VERSION?
 >
 >
 >--
 >Kumar
 >
 >Mike Reiche wrote:
 >
 >> From the zip file.
 >>
 >> It has to be a jsp that references those tag libraries.
 >> Other than that it works like a charm.
 >>
 >> Mike
 >>
 >> Kumar Allamraju <[email protected]> wrote:
 >> >Did you extracted the SP9 zip or exe?
 >> >I do not see the following errors when accessing a jsp with SP9? Could
 >> >you tell us how to
 >> >reproduce it?
 >> >
 >> >BTW, i will ask our docs folks to correct the startup scripts..
 >> >
 >> >--
 >> >Kumar
 >> >
 >> >Mike Reiche wrote:
 >> >
 >> >> I had to remove the 'async' attribute from taglib.tld
 >> >>
 >> >> And when I use WLCS I have to remove it from weblogic.tld
 >> >>
 >> >> And the startup scripts provided do not include weblogic-tags-510.jar
 >> >> in the classpath.
 >> >>
 >> >> Mike
 >> >>
 >> >> "Mike Reiche" <[email protected]> wrote:
 >> >> >
 >> >> >WLS 5.1, sp9 pre-release, solaris 2.7, WLCS 3.2
 >> >> >
 >> >> >JSP compile fails with the exception...
 >> >> >
 >> >> >weblogic.servlet.jsp.JspException: (line -1): Error in
 >> >> >tag library
 >> >> >at: 'wl':
 >> >> >The Tag class 'weblogicx.jsp.tags.CacheTag' has no setter
 >> >> >method
 >> >> > corresponding to
 >> >> >TLD declared attribute 'async', (JSP 1.1 spec, 5.4.1)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:138)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.processTag(StandardTagLib.java:264)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.processTagElements(StandardTagLib.java:146)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:125)
 >> >> > at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:95)
 >> >> > at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:3873)
 >> >> > at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:3623)
 >> >> > at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:3484)
 >> >> > at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:1817)
 >> >> > at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1658)
 >> >> > at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1548)
 >> >> > at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:888)
 >> >> > at weblogic.servlet.jsp.JspParser.doit(JspParser.java:69)
 >> >> > at weblogic.servlet.jsp.JspParser.parse(JspParser.java:125)
 >> >> > at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:109)
 >> >> > at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:242
 >> >
 >

Remove cs6 pre-release

Hello!
I have tried so many times to remove photoshop cs6 pre-release, but without any success.
I have downloaded photoshop cs6 extended from this link:
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop&loc=en_us
I stupidly put it in the bin first and emptied the bin when actually I shouldn't have done so. So I tried the cleaner
http://www.adobe.com/support/contact/cscleanertool.html
I've put first to remove cs5 , cs5.5 and cs6
then I did it again with cs6 alone.
I've restarted my computer.
Still doesn't work, I always get the message:
"A conflicting or prerelease version of adobe photoshop exists on this computer (...) "
I have searched previous similar topics about the same problem, no success.
Please do help me ;___________;

Hi (:
I looked for it for uninstall program and it is not there. And I've just deleted. I tried everything, I even used the function with the clean "delete all" to make sure there's no single trace of it. No hope.
I don't know what I am supposed to do, I don't find it in the programs in order to uninstall it, I already deleted in the bin (stupidly) and I've cleaned everything with the cleaner. It keeps on puting the same message.

Lightroom 5.3 problems, downloading through Creative Cloud.

Lightroom 5.3 problems, downloading through Creative Cloud. Error 1624
ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid.
MSI Error message:
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624

this is from emma at https://blogs.adobe.com/lightroomjournal/2013/12/lightroom-5-3-now-available.html
I had this same error and managed to get around it by running the .msi file that the CC app downloaded to a temp folder on my own. Steps were:
1. Find the location Adobe_Lightroom_X64.msi (in a a temp folder)
2. Run it and install (serial number was already pre-filled out)
3. Restart the CC desktop app
It then appeared as installed under ‘Your Apps’ and works as usual.

Ipad ios 4.2 update error - "there was a problem downloading the software..

Hi All -
Super excited to get 4.2.1 up and running. I had the buggy beta of 4.2 running on my iPad but now when I try to restore my iPad to get the most recent version of 4.2.1 running, I get this error:
"There was a problem downloading the software for the iPad. The requested resource was not found.
I've restarted iTunes and the computer and I'm still getting the same error. I've looked for the .ipsw file online but can't seem to find it anywhere. It's not an Apple's Support/Downloads section either.
Anyone know where to download the new update? I'm dying without Airplay, Airprint and so on not working here.
Thanks!
CH

Hi,
this should have been addressed by Apple I guess, but luckily we found out the solution in the company. Yesterday all our iPads (with 4.2 beta iOS for dev) stopped working, displayed the Connect to iTunes scrren and throw errors when trying to sync like 'The requested resource was not found' (when tried to Restore) and Error Code: 0xE800005D (when iTunes first just tried to reinstall apps).
Here is what we did to reanimate all four iPads in the company:
First you need to enter Recovery mode with the iPad, then recover the iOS software (probably the latest). Here is how to do it:
1) Fire up iTunes on your computer, and plug in the USB cable in the computer, but not in the iPad!
2) Do a hard reset, ie. press and hold down Sleep/Wake and Home buttons simultaneously, don't bother with the switch off prompt, just keep pushing the buttons.
3) When the screen goes blank, but before the Apple logo comes up, release the Sleep/Wake button and quickly plug in the USB into the iPad too. Keep pushing the Home button, until the Recovery mode dialog in iTunes comes up.
4) Act according to the prompts, and wait for the image to download and extract (can be 10-15 minutes depending on your internet connection, the image is some 550Mb).
That's it, you can safely restore your apps and other content to your recovered iPad.
Hope this helps,
David

Problems downloading movies since upgrading to mavericks

Ever since upgrading to mavericks when it was first released, I have had nothing but problems downloading movies in iTunes. What normally would take no more than 30 minutes to download a movie and iTunes extras has now turned into waiting more than 3 hours with no less than 4 error messages saying iTunes cannot download the movie and I have to relaunch iTunes or reboot my entire system. It is getting quite annoying and I can't seem to find a solution.
Any help would be greatly appreciated.
Thank you in advance.

I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
This is not normal and needs to be fixed soon!

"change" pre-release beta button unreachable (Italian Yosemite)

As you can see in the image below the "Change" button in the Italian version of Yosemite OS is impossible to click because of the long italian translation. I want to disable beta pre-release and I can't.
Please help or if anyone know a different command to avoid this problem.
Thanks

Temporarily change the system language to English.

Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very much

Mucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Problems downloading Photoshop elements 11 onto Mac running snowleopard

please can anyone help me with this problem
entered the redemption code on adobe website, and then received the Serial Number for photoshop elements 11
then clicked on the download file, which sent me to Arvato link for zip file
downloaded the zip file, but it then will not open, so can't complete the download.
what hapened to buying software on Discs !!
i've now wasted 2 hours trying to sort this out, so would greatly appreciate some advice
thanks
Reply
|Edit
|Delete
|

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial number.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

Adobe Premiere Elements pre-release

Adobe Premiere Elements 9 is a complete movie editor software solution. Organize , create, enhance, and share home movies.
With Adobe Premiere Elements 9, you can create entertaining movies with less effort, make your movies look professional with amazing effects, share virtually anywhere fast, and automatically organize and protect your video clips and photos. Easily fix audio problems, and enjoy optimized HD and SD editing. Treat family and friends to a convenient, interactive web DVD viewing experience. And quickly share videos and photos on Facebook.
Premiere Elements team is looking to add some dedicated pre-release users who can help us in testing/evaluating the software before it is released in the market. As a pre-release user you can:
1.       Use new features in PRE.
2.       Suggest improvements in existing features.
3.       Suggest new features.
4.       Criticize the product.
We are looking for following type of users:
1. People who do not have any experience with any video editing software but who want to edit videos.
2. People who are already editing videos using any video editing application.
If you are interested in joining our pre-release program send a private message to me with the following details:
1.       How much experience do you have in video editing:
2.       How much experience do you have in video editing with Premiere Elements:
3.      Video camera(s) you have:
4.       Your Machine Type: Windows / Macintosh
5.       How many hours per week can you spend in using Premiere Elements and provide feedback.
-Akshat

> send a private message to me
You must have missed that part

Problems downloading pre-release of Robbie Williams Rudebox

Similar Messages

Maybe you are looking for