Problems downloading with Windows Vista

I get this message when i try to use iTunes. What the heck do I do?
This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package.

Hi.
This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes or iPods.
You should probably post your question in iTunes or iPod discussions:
http://discussions.apple.com/category.jspa?categoryID=150
http://discussions.apple.com/category.jspa?categoryID=146

Similar Messages

  • Problem Installing with Windows Vista

    I have windows Vista and I am trying to install flash player i go to save it then run it and i get a message saying only a single instance of this application can run. I have tried the offline version i have tried to delete all the folders that go with flash player and i still can not get flash player to load on to my computer. is there anyone that could help me out please

    I branched this into it's own thread.
    I you haven't rebooted yet, reboot your machine and immediately run the installer that you downloaded.  That should solve any issue with an active process keeping Flash Player busy.

  • Problem Icloud with Windows Vista

    Hello I'm french and my english is not perfect.
    I try to explain to you what is my problem.
    When I want to connect with my ID Apple, I can read this message " You can't to connect you because there is an error of server"
    Thanks
    When I launch Icloud on my PC

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem?

    I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program? 

    I'd start with the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • HT1349 I have icloud on my pc with windows vista.  Recently, upon startup I receive an error that says applephotostream.exe has stopped working.  Windows will close this problem . . . any suggestions.  I tried to download the control panel again. no luck

    I have icloud on my pc with windows vista.  recently, upon startup I get a message that says applephotostream.exe has stopped working.  Windows will close this program  . . . I tried re-installing the icloud control panel, etc.  to no avail.  any leads?

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
    The root cause for this was failing to use the UTILITY designed for this very purpose.
    I edited the virtual directory settings in IIS and was able to put the correct path in.
    You still need to use the UTILITY.. to fix all the other stuff you're still missing.
    In the %ProgramFiles%\Update Services\Tools folder...
    WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
    This problem was caused by moving the WSUS updates to a different local drive.
    No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

    Hello,
    I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
    The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
    I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
    I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
    I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
    Any help would be greatly appreciated.

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Downloading Lightroom with Windows Vista

    Can I download Lightroom 5.5 with Windows Vista?

    Downloading LR 5.3 isn't a problem, but running it will be, as it isn't supported. You could take a look at this http://www.doerg.es/doku.php?id=start:computer:lightroom5vista. I would point out that it is not supported by Adobe.

  • I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

    I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
    ITunes will be installed wrong or what should I do to activate these options?

    Go to the front page of the Store, and click Change Country.  Make sure it is set to the country where you actually are. 
    Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

  • Problem Laserjet 1000 with Windows Vista 32 bit

    Good morning. I have a laserjet 1000 connected to the USB port on another computer with windows xp and shared. I have to connect it to another pc with windows vista pc with ip address. Install the printer but does not work. I used the driver for win xp as I read on several forums but it does not work. What kind of driver should I use ?
    Can you give me some advice ?
    Thank you

    If your model is lacking the correct Vista drivers from Lenovo and Vista doesn't offer native support then I see upgrading to Windows 7 as your only option.  Here is a link to what Lenovo drivers are available.......
    http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS035825
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Problems dual booting Windows Vista with Oracle Enterprise Linux 4

    I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
    Initializing hardware....Storage network"
    It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

    hi,
    r u getting this error while installing oel or after installation?
    which version of oel u r installing?
    u may get this error probably due to hard disk (usually sata) compatility with linux.
    --Regards
    Xaheer

  • Itunes problem with windows Vista

    ok i bought my touchsmart tx2 1025 with windows vista ultimate 64 bit and well i ve noticed that ..well since this is my third time i exchange this computer and i noticed there was a problem with the speakers when i was playing music that anytime during a song i would get this distorted sound like when u put a lot of volume in ipod headphones that it sounds like a crack. Well that happened in my computer even with low volumes.
    However I played two times the same song on itunes and two times on windows media player.
    Every single time on itunes the sound came as if the speakers were about to blow... like a crack..
    Every single time on Windows media player it never sounded like that.
    So i am pretty sure its an itunes problem. Does anyone know how to fix this.. i would rather use itunes than windows media player but i really hate the sound it makes sometimes because it shows about 2 to 3 times during one song.

    It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
    This is more likley a problem with the song than iTunes

  • ¿Problems with Windows Vista or Sony Vaio?

    Hello everyone
    I have a Cisco 2100 WLC with two Access Points 1130, with two WLAN networks, one with WPA2 and the other with Web-Authentication. The two networks works correctly, but I have a client, a Sony Vaio with Windows Vista, which usually give  problems, disconnects, and when you try to reconnect, you can not.
    When  this happens, in the WLC appears the error "Decrypt errors Occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b / g interface of AP xx:xx:xx:xx:xx:xx" .
    Sometimes several times to restart the laptop, reconnect. The network card is an Intel 5100, anyone know if there is any inconsistency between this card and Cisco AP? Or is it a matter of O.S.?
    I have no other Windows Vista client to verify, the other clients are Windows XP and 7. I have tried reinstalling different drivers on the laptop and not the solution.
    Thanks

    Hi Carlos,
    Make sure that:
    1. you are running latest driver from intel on your laptop
    2. use only AES encryption with WPA2. If TKIP is also selected. Uncheck it and leave only AES.
    Cheers
    Serge

  • Previewing web page problems with Windows Vista

    Just wonderering if there is anyone who can solve a problem I
    have with Windows Vista, It wont let me preview my pages being made
    in Dreamweaver...I get a pop with a navcancl message...
    Can you help please as I am seriously thinking of going back
    to Windows XP...
    Creative

    No, but really - what's the message? I'm developing under
    Windows Vista and
    DW CS3 and never had an errors with previewing.
    Shane H
    [email protected]
    http://www.avenuedesigners.com
    =============================================
    Blog:
    http://avenuedesigners.com/blog/
    Web dev articles, photography, and more:
    http://sourtea.com
    =============================================
    Proud GAWDS member
    http://www.gawds.org/showmember.php?memberid=1495
    Delivering accessible websites to all ...
    =============================================
    "Shane H" <[email protected]> wrote in
    message
    news:f3tcg3$mvk$[email protected]..
    > Yeah, all the errors drove me nuts. I'm all the way back
    to developing on
    > Windows 3.1, now.
    >
    > --
    > Shane H
    > [email protected]
    >
    http://www.avenuedesigners.com
    >
    > =============================================
    > Blog:
    >
    http://avenuedesigners.com/blog/
    >
    > Web dev articles, photography, and more:
    >
    http://sourtea.com
    > =============================================
    > Proud GAWDS member
    >
    http://www.gawds.org/showmember.php?memberid=1495
    >
    > Delivering accessible websites to all ...
    > =============================================
    >
    > "htmlgirl" <[email protected]> wrote in
    message
    > news:f3ssbi$5va$[email protected]..
    >> Just wonderering if there is anyone who can solve a
    problem I have with
    >> Windows
    >> Vista, It wont let me preview my pages being made in
    Dreamweaver...I get
    >> a pop
    >> with a navcancl message...
    >>
    >> Can you help please as I am seriously thinking of
    going back to Windows
    >> XP...
    >>
    >> Creative
    >>
    >

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Maybe you are looking for

  • Viewing on an external monitor with 16:9 ratio

    Can someone tell all the available resolution when viewing in a 16:9 external monitor?, i know the macbook is 16:10 so what happens in this circumstances?

  • Installment payment term with full tax in one installment

    Hi, I have a requirement where customer is looking for a payment term which is like this 1. X% of invoice amount + 100% VAT amount due to XX days 2. rest of invoice amount due in YY days (No Tax) We can have a payment term with 'Installment Payments'

  • Time Machine Backup Not Current

    TM is not backing up modifications, e.g. iPhoto Library backup date over three weeks old, Documents 11 days old, yet there are many new files. Tech had me delete plist, but didn't fix. Left me on hold >25 minutes, then dropped. What else is missing?

  • Possible to use iPad as a display for iPhone?

    i have a wifi-only iPad 3 and an iPhone 5 (no tethering plan).  i'm wondering if it is possible to connect the two via cable and use the iPad as a display for the iPhone while i am driving.

  • Master Data Extraction through Open Hub services(InfoSpoke)

    Hello,          I need your help on this issue, Here is my scenario... I want to extract Master data from BW (Info Object) as a file and put it in a server then later that can be picked up by some other deprtment for their process. This process has t