Problems due to update?!
The other night I was out and my phone [Droid Incredible 2] had really low battery but I wasn't able to charge it. But I did see some notification about it trying to do an update before I fell asleep. I ended up leaving my phone on a train, but I did get it back. However when I got it back all of my settings were completely gone, I had no contacts, and I couldn't use the phone (make phone calls or anything), however, I still had all my music and photos on my phone. I called Verizon about the issue, and they said that the network said my phone was still activated, but they reactivated it for me so now it is working (thankfully). But, I'm noticing some different things about the phone: the notifications window is different, when I receive a text while I'm on the phone it makes this notification sound that I didn't even set up, and it vibrates, which is annoying and it never did that before, I also can't trim mp3s to make ringtones, when I do choose a ringtone, sometimes the phone plays it or sometimes it plays something else.
Are all of these new things due to the update? And is what happened with my phone from the update as well? And is there anyway to change/fix any of these things?!
Thanks!
It's time to call Verizon again tell them your case an have Teck go thru with you an do a FR a Factory Reset to Clear that phone if your seeing differences in it. To be on the safe side as someone could of messed with it before you got it back. once the Reset is done it should work as did when you got it New. If it still has issues Take back to the Store. B33
Update:
As for the Gingerbread update you'll see some changes but if your Inc 2 is acting really weared do the FR as it will set it back to when you got it at the store. B33
Similar Messages
-
Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?
Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard -
How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!
You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?
-
Snapshot isolation transaction aborted due to update conflict
Hi Forum,
Can anyone help me to give the solution for this below problem.
We are developing MVC3 application with SQL Server 2008, we are facing as
Snapshot isolation transaction aborted due to update conflict
Snapshot isolation transaction aborted due to update conflict. You cannot use snapshot isolation to access table 'dbo.Tb_M_Print' directly or indirectly in database 'DB_Production' to update, delete, or insert the row that has been modified or deleted
by another transaction. Retry the transaction or change the isolation level for the update/delete statement .
Please tell me the solution how to proceed for the above problem
Ramachange the isolation level for the update/delete statement .
The error message already mentions the solution.
See also MSDN
Lesson 1: Understanding the Available Transaction Isolation Levels => Update Conflicts
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Problem with getting updates to install
On one of my computers, I have been having problems getting windows updates to complete They either error out right away with codes that I cannot find any information on. Or, they run correctly but during restart, they error out at 90% (reverting) and never
get installed. This is a Windows 7 SP1 computer and there are about 50 updates that cannot install. I notice that after the update attempt the Windows Update log has the following error:
DnldMgr *********** DnldMgr: New download job [UpdateId = {F534C799-3255-44C5-841B-F78F82435AD0}.202] ***********
DnldMgr Regulation: {7971F918-A847-4430-9279-4A52D1EFE18D} - Update F534C799-3255-44C5-841B-F78F82435AD0 is "PerUpdate" regulated and can NOT download. Sequence 1753 vs AcceptRate 0.
DnldMgr * Update is not allowed to download due to regulation.
Seems like a problem but there is no information on this error if I search for it.
Also, I have run the System Update Readiness Tool (KB947821)several times and I was able to remover some of the errors it found except and error with KB2570791 that I cannot fix. It has errors with some fonts (I think), so I tried to remove the update. However
it runs for a while and then says that the update cannot be removed ad quits. So I am stuck with a computer that cannot be updated.Here is the forum for Win. Update
-
Share and save problem after latest update
hello,
i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app but problem is still and app doesn't work properly ) how can i downgrade to the old version ? Could you fix this problem quickly ?i use app which called "aLogcat"
--------- beginning of /dev/log/main
I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
--------- beginning of /dev/log/system
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms -
I would like to know is there anybody in the community that is not have a problem with the updates.
That is incorrect. Either you misread or the newspaper you read was wrong. iOS 6.1.2 fixes a bug that caused excessive activity and log entries with Exchange servers.
http://support.apple.com/kb/DL1639
The security breach was due to Java-based malware:
http://www.ft.com/cms/s/0/1fdebce6-7ac8-11e2-915b-00144feabdc0.html -
dueing the update IOS 7 7.0.2, ipad show the message is contact the itunes, when I back the house, ipad contact the PC and itunes for recovery the ipad but unsuccessful. Now ipad is not start.please help
I hope this helps. If I understood your question properly, it is the same or similar problem many, including myself, had with the IOS7 update. I'll relay my situation & what I did to rectify it. I have the iPad2 & MACBook Pro. I have an iPhone 5 but won't be updating it.
IF YOU HAVEN'T YET UPDATED YOUR iPAD TO IOS 7... DON'T. NOT UNTIL YOU'RE CERTAIN YOU HAVE BACKED UP YOUR iPAD, AT LEAST. BE ABSOLUTELY CERTAIN YOU HAVE BACKED UP YOUR DEVICE.
FIRST: BACK UP YOUR IPAD, & ALL YOUR DEVICES.
NEXT: CHECK FOR UPDATES ON ALL DEVICES.
I updated my iPad while away from my main wifi connection because using my main wifi for the last update subsequently interfered with my connection thereafter. New problem now.
1.) Once I updated (was it successful/unsuccessful?) Because...
My iPad showed a large apple with a line underneath; then it illustrated & said, "connect to iTunes." i can't accessa thing. (Huh? Doesn't Apple know people TRAVEL FAR away from their MAC with their iPads? I WAS RUDELY LEFT WITH AN INOP DEVICE on the road.)
2.) On my MAC: I checked for all updates, & ensured my iTunes was updated.
3.) I followed thre following instructions from a website (http://www.digitaltrends.com/mobile/ios-7-problems/) I found when researching this common problem. iPhone... iPad... same instructions...
...connect to iTunes and try DFU (Device Firmware Upgrade) mode.
Potential solution:
Hold down the Sleep/Wake button to turn your iPhone off.
Open iTunes on your computer and connect your iPhone.
Hold down the Sleep/Wake button and the Home button together for ten seconds, and then release the Sleep/Wake button.
Continue to hold down the Home button until you see a pop-up on iTunes stating that “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”
Your iPhone screen should be blank, if you see a logo or message on it then you are not in DFU (Device Firmware Upgrade) mode.
Select your iPhone in the left hand column of iTunes and select Summary then Restore.
You may need to install the iOS 7 update again.
------------------ THIS WORKED.
I followed the instruction & so far so good. DO NOT DISCONNECT YOUR iPAD! It will continue to prompt you through SEVERAL items, including the re-installation of one of your previous back-ups. It appears the back-up was successful & that everything is now back to normal.
Except that now I'm stuck with the juvenile appearance of this new IOS. My Notepad no longer looks like a notepad. Why don't I just type on DOS? My APPLE easthetice have disappeared. If I can, I will revert to IOS 6.
Read more: http://www.digitaltrends.com/mobile/ios-7-problems/#ixzz2g7Y2neAU
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook -
Hi all,
RE: Applications problem: "You cannot update this software since you have not owned the major version of this software."
Until recently, I have not encountered this problem. And I am facing this problem for both my iPad and iPhone.
I only have 1 iTunes account and the most recent change was that I switched the location from Singapore to UK (I'm currently in the UK). I also updated my applications a couple of times before since the change in location, so I doubt it's due to the location change. I've tried signing out of the account in the iTunes accounts on the devices, then signing back in. I've also tried restarting the devices (and for the iPad, I even updated the iOS).
Any idea what else I can do to try to rectify this?
Thanks and regards,
TammyHi there!
Thanks for replying!
1. Yup, my iOS is the latest (6.0.1), and I have 7 apps on my iPhone that apparently have updates. But it's been 6.0.1 for quite some time and I've also been able to update the apps till just this week.
2. I don't have a credit card associated with my account anymore. Ever since I changed the location, I removed the credit card details. But I didn't have problems with any of my apps (updating or downloading new ones) until this week. Also, all the apps I've downloaded since I came to the UK are free apps.
I still don't know what's wrong. -
Problems After Latest Update (7.1 Bundle 2061 - v7.1.0.714, Platform 5.1.0.532)
Hi all.
Having afew problems with my 9810 since the latest upgrade today. When I used my Desktop Software, it said a new version of the software was available, so I updated it. Once this was updated, I connected the phone and it told me a new version was available. Before installing this, I created a back-up,but I noticed that the back-up wasn't complete (Blackberry Messenger 0/2 and something else 0/2 was given as the items not backed-up).
I tried backing it up again and got the same message. Stupidly, I updated the phone anyway. This new version of the Desktop Software creates a backup during the update anyway which it uses to restore the phone (I've not noticed the previous version to do this).
Anyways, when the update was complete, I notice that my BBM was empty. It asked for a new profile name etc (obviously due to the above parts not being backed-up). Somehow, I managed to get the BBM contacts back from previous back ups, however, a few other aspects of the phone don't function like they use to. For example:
1, EMAILS - when deleting emails, I use to get an option to delete the message from "Handset", or "Handset & Mailbox". Now it just asks to delete and does not give me an option;
2. DEVICE ANALYSER - Although this appears in the application list, I cannot locate it on the phone (this was a problem in previous updates, but usually it would then appear in the application list with a '?', but not this time);
3, I have 2 applications listed in the applications with '?' over the icon- these might be related to the emails in 1 above; these are "Blackberry S/MIME Support" and "DOD Route Certificates"
Any advice on how to rectify these niggling little issues?
Sorry if this has been covered, but I was hoping for something easy to understand.
TIAHey,
Welcome to the BlackBerry® Support Community Forums.
Please review the following article that provides the steps on how to configure your Email settings to Prompt the option to delete on Handheld or Mailbox & Handheld.
How to enable wireless email reconciliation options for deleting email messages on the BlackBerry Smartphone
http://btsc.webapps.blackberry.com/btsc/KB11830
Now to address your 2nd question regarding the BlackBerry Device Analyzer Application is missing on the BlackBerry smartphone, please see here: http://www.blackberry.com/btsc/KB31922
And last, BlackBerry S/MIME Support is a type of encryption that can be used if the BlackBerry smartphone is activated to a BlackBerry Enterprise Server. DOD root certificates are used by the Department of Defense, these options are available for all BlackBerry smartphones. If you are not using the S/MIME or DOD root certificate features it is ok to remove them.
I hope this helps.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Touch sensitivity problem after latest update iOS 6.1
Hi guys,
does anyone else have the same problem? After updating my iPhone 5 to latest version iOS 6.1, touch screen stared to work wierd. I have to slide a few times just to unlock my screen. Can not poroperly open any application and when I want to scrool, that's pain in the ***.
Can anyone help me about this? Is that problem with the update iOS 6.1 or my iPhone5, 3 motnhs old become broken?
Thanks in advance.Hi. I have a 3 years old 3GS which i have updated whenever a new iOS was avaialble. This has been working with improvements besides the fact that the phone gradually is becomming slower with increased functions and especially from iOS 6.0 and up. It has however worked ok keeping in mind that it is a 3 years old phone. With the latest update to iOS 6.1, however, the use af the iphone has severely been affected, much like you other guys are experiencing. The below described behavior of the iphone has never happened before, until the faithfull morning of the 4th of februar, 2013 when i accepted to update the iOS to 6.1. Immediately after the update the problems started:
When sliding to unlock the phone it takes several attemps (sometimes 10 or more) before the slider actally follows my finger to the end and the iphone unlocks.
When typing (eg. a text msg. or email message), it is now allmost impossible to type a meaningfull message because some of the keys do not respond and other only respond to a very hard press. Only when typing very slowly, making sure the touchscreen is actually responding, a usefull message can be made. It seems like the sesitivity of the touchscreen has been altered making it less sensitive.
The same behaviour is observed for other functions and Apps like games which are now impossible to use due to the poor response of the touch screen.
Now i only wish i could roll back the iOS to an earlier version (like 5.1.1) where the iphone was really working well.
I really hope that a new and improved iOS will be out soon to correct for this problem -
Multiple Samsung Stratosphere problems after FF1 update
There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger -
What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn’t decide what she wanted so she stayed with old phone but this locked me into a new 2 yr contract . Within a wk one of the new iPhones started turning on and of like 10 –15 times a day. Wk 2 it turned off and would not turn on again . It was my sons who was in college at the time so we talked and he took it in to a Verizon store where he was told I need to come in since the account was in my name. He was away from home , Verizon could see on account it was his phone they said it was not abused, they could not even turn it on , they sold me the phone give him another phone maybe even a loaner till he gets another. So now I need to go to store and explain to 3 different people this is my phone and my son has it and I need a new one. what a waste of time after about 2 hrs and talking to different people and yes they said there were notes on his account from other person he had talked to from different store. So I finally walk out with a receipt in hand and being told I would have a new phone in a couple days. As I sat in my vehicle thinking this is stupid I looked at my receipt and noticed it said droid on it so back into Verizon I went. The salesman said that’s what your son has on his account. My son had activated a friends old phone so he has one since VERIZON REFUSED to give him one. Another hr 3 people and yes they can see he had a new iPhone and notes on it from other store. Sometimes sorry just doesn't do it. I was now late for a appointment . Now I walk out and have been told I will get a new iPhone in the mail in about 2 wk Yes 2 wks again I bought it there just give me a new one and you send old one back. I will also get a new droid that I have to send back because they said they cant cancel it . In about 3 days I get the Droid and sent it back Verizon mistake and a waste of my time . After waiting over 2 wks and not receiving a new iPhone back to Verizon I went . I am now bitter at Verizon after doing 20 yrs of business with them. 3 people 1 hr later I was told it got delivered to my post office . I got the tracking num called the post office and they say o yes that was the droid. Go back in to Verizon another hr of explaining I walk out being told I will get a new iPhone in a couple of days, We’ll see . Once again I got the phone in your store just give me a new one . Do you realize how much of my time you have wasted ? do you care? O what is Your Policy ? How many Billion did you make last year ? I am Locked into a new 2 yr contract . Why don’t you just release me ? After 20 yrs do you think I will ever renew my contract ?
Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck -
I have a problem with an update page on my website
Here's how it work
values are defualted in from the advert table - this works fine
I should then be able to change the fields and click on the update button
This works fine but ONLY when the O_year field is populated.
There doesn't seem to be anything special about the O_year field
I thought spry text validation would of been causing the issues, but I removed them and have the same problem.
For some reason the POST_MMupdate value is not being set to 'form4', which it is doing if O_year is set.
Please can someone have a look at this, code,
Also, is there a way of 'stepping through' dreamweaver code to debug it?
Thanks
Adam
$colname_Advert = "-1";
if (isset($_GET['advert_id'])) {
$colname_Advert = $_GET['advert_id'];
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$query_Advert = sprintf("SELECT * FROM advert WHERE advert_id = %s", GetSQLValueString($colname_Advert, "int"));
$Advert = mysql_query($query_Advert, $guitarswap_db) or die(mysql_error());
$row_Advert = mysql_fetch_assoc($Advert);
$totalRows_Advert = mysql_num_rows($Advert);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form4"))
//Сheck that we have a file
if((!empty($_FILES["PictureLocation"])) && ($_FILES['PictureLocation']['error'] == 0))
//Check if the file is JPEG image and it's size is less than 350Kb
$filename = basename($_FILES["PictureLocation"]["name"]);
$ext = substr($filename, strrpos($filename, '.') + 1);
if (($ext == "jpg") && ($_FILES["PictureLocation"]["type"] == "image/jpeg") &&
($_FILES["PictureLocation"]["size"] < 350000))
//Determine the path to which we want to save this file
$newname = dirname(__FILE__).'/upload/'.$filename;
//Check if the file with the same name is already exists on the server
if (!file_exists($newname))
//Attempt to move the uploaded file to it's new place
if ((move_uploaded_file($_FILES['PictureLocation']['tmp_name'],$newname)))
// echo "It's done! The file has been saved as: ".$newname;
else
// echo "Error: A problem occurred during file upload!";
else
// echo "Error: File ".$_FILES["PictureLocation"]["name"]." already exists";
else
// echo "Error: Only .jpg images under 350Kb are accepted for upload";
else
// echo "Error: No file uploaded";
$filename=$row_Advert['PictureLocation'];
// set default opentoalloffers
if (!isset($_POST['checkopentoalloffers']))
$_POST['checkopentoalloffers'] = 'n';
$updateSQL = sprintf("UPDATE advert SET PictureLocation=%s, O_Make=%s, O_Model=%s, O_Country=%s, O_Year=%s, O_Colour=%s, O_Body=%s, O_Neck=%s, O_Fingerboard=%s, O_Pickups=%s, `value`=%s, `condition`=%s, W_Make=%s, W_Model=%s, W_Country=%s, W_Year=%s, W_Colour=%s, W_Body=%s, W_Neck=%s, W_Fingerboard=%s, W_Pickups=%s, Comments=%s, opentoalloffers=%s, ChangeFlg = %s WHERE advert_id=%s",
GetSQLValueString($filename, "text"),
GetSQLValueString($_POST['O_Make'], "text"),
GetSQLValueString($_POST['O_Model'], "text"),
GetSQLValueString($_POST['O_Country'], "text"),
GetSQLValueString($_POST['O_Year'], "date"),
GetSQLValueString($_POST['O_Colour'], "text"),
GetSQLValueString($_POST['O_Body'], "text"),
GetSQLValueString($_POST['O_Neck'], "text"),
GetSQLValueString($_POST['O_Fingerboard'], "text"),
GetSQLValueString($_POST['O_Pickups'], "text"),
GetSQLValueString($_POST['value'], "int"),
GetSQLValueString($_POST['condition'], "text"),
GetSQLValueString($_POST['W_Make'], "text"),
GetSQLValueString($_POST['W_Model'], "text"),
GetSQLValueString($_POST['W_Country'], "text"),
GetSQLValueString($_POST['W_Year'], "date"),
GetSQLValueString($_POST['W_Colour'], "text"),
GetSQLValueString($_POST['W_Body'], "text"),
GetSQLValueString($_POST['W_Neck'], "text"),
GetSQLValueString($_POST['W_Fingerboard'], "text"),
GetSQLValueString($_POST['W_Pickups'], "text"),
GetSQLValueString($_POST['Comments'], "text"),
GetSQLValueString($_POST['checkopentoalloffers'], "text"),
GetSQLValueString('y', "text"),
GetSQLValueString($_POST['advert_id'], "int"));
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$Result1 = mysql_query($updateSQL, $guitarswap_db) or die(mysql_error());
$updateGoTo = "Member2.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="Layout3.css" rel="stylesheet" type="text/css" /><!--[if IE 5]>
<style type="text/css">
/* place css box model fixes for IE 5* in this conditional comment */
.twoColFixLtHdr #sidebar1 { width: 230px; }
</style>
<![endif]--><!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional comment */
.twoColFixLtHdr #sidebar1 { padding-top: 30px; }
.twoColFixLtHdr #mainContent { zoom: 1; }
/* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
</style>
<![endif]-->
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
body {
background-color: #FFF;
margin-left: 20px;
.twoColFixLtHdr #container #main3 #form1 div fieldset {
border: thin ridge #CCC;
-->
</style>
<script type="text/javascript">
<!--
function MM_goToURL() { //v3.0
var i, args=MM_goToURL.arguments; document.MM_returnValue = false;
for (i=0; i<(args.length-1); i+=2) eval(args[i]+".location='"+args[i+1]+"'");
//-->
</script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header">
<div id="Righty">
<ul id="MenuBar2" class="MenuBarHorizontal">
<li><a href="index.php">Search</a> </li>
<li><a href="Member2.php">Members</a></li>
</ul>
<p> </p>
</div>
<span id="LoginDiv">
<?php
if (isset($_SESSION['MM_Username']))
echo "hello ". $_SESSION['MM_Username']. "";
echo " <a href='Logout.php'>Log out</a> ";
else
echo "
<a href='Login.php'>Login</a> / <a href='Register.php'>Register</a>
?>
</a></span>
<div id="Middle">
<h1 align="center">GuitarSwap</h1>
</div>
</div>
<div id="sidebar1">
<h4>Members Area</h4>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="Member2.php">My Adverts</a></li>
<li><a href="NewAdvert.php">Create new Advert</a></li>
<li><a href="UpdateUserDets.php">My Account</a></li>
</ul>
<h3> </h3>
</div>
<div id="mainContent">
<h4>Update Advert</h4>
<!-- end #mainContent -->
</div>
<!-- This clearing element should immediately follow the #mainContent div in order to force the #container div to contain all child floats -->
<div id="main3">
<div id="main">
<fieldset>
<legend>Please update advert details and confirm</legend>
<form action="<?php echo $editFormAction; ?>" enctype="multipart/form-data" method="post" name="form4" id="form4">
<input type="hidden" name="advert_id" value="<?php echo $row_Advert['advert_id']; ?>" />
<p></p>
<table width="650" align="center">
<tr valign="baseline">
<td width="17" rowspan="15" valign="middle" nowrap="nowrap"><?php echo "<img src='upload/" .$row_Advert['PictureLocation']."' width='64' height='180'/>" ?></td>
<td width="133" align="right" nowrap="nowrap"> </td>
<td width="240" align="center" bgcolor="#CCCCCC"><strong>Offered</strong></td>
<td width="240" align="center" bgcolor="#CCCCCC"><strong>Wanted</strong></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Make:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Make" type="text" value="<?php echo $row_Advert['O_Make']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Make" type="text" value="<?php echo $row_Advert['W_Make']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Model:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Model" type="text" value="<?php echo $row_Advert['O_Model']; ?>" size="30" maxlength="30" /></td>
<td bgcolor="#CCFFFF"><input name="W_Model" type="text" value="<?php echo $row_Advert['W_Model']; ?>" size="30" maxlength="30" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Country:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Country" type="text" value="<?php echo $row_Advert['O_Country']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Country" type="text" value="<?php echo $row_Advert['W_Country']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Year:</strong></td>
<td bgcolor="#CCFFCC"><span id="sprytextfield1">
<input name="O_Year" type="text" value="<?php echo $row_Advert['O_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
<td bgcolor="#CCFFFF"><span id="sprytextfield2">
<input name="W_Year" type="text" value="<?php echo $row_Advert['W_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Colour:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Colour" type="text" value="<?php echo $row_Advert['O_Colour']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Colour" type="text" value="<?php echo $row_Advert['W_Colour']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Body:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Body" type="text" value="<?php echo $row_Advert['O_Body']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Body" type="text" value="<?php echo $row_Advert['W_Body']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Neck:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Neck" type="text" value="<?php echo $row_Advert['O_Neck']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Neck" type="text" value="<?php echo $row_Advert['W_Neck']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Fingerboard:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Fingerboard" type="text" value="<?php echo $row_Advert['O_Fingerboard']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Fingerboard" type="text" value="<?php echo $row_Advert['W_Fingerboard']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Pickups:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Pickups" type="text" value="<?php echo $row_Advert['O_Pickups']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Pickups" type="text" value="<?php echo $row_Advert['W_Pickups']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Condition:</strong></td>
<td bgcolor="#CCFFCC"><label for="condition">
<select name="condition" size="1" id="condition">
<option selected="selected" value="" <?php if (!(strcmp("", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>---select---</option>
<option value="immaculate" <?php if (!(strcmp("immaculate", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>immaculate</option>
<option value="excellent" <?php if (!(strcmp("excellent", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>excellent</option>
<option value="good" <?php if (!(strcmp("good", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>good</option>
<option value="well used" <?php if (!(strcmp("well used", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>well used</option>
<option value="poor" <?php if (!(strcmp("poor", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>poor</option>
</select>
</label></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Value:</strong></td>
<td bgcolor="#CCFFCC"><span id="sprytextfield3">
<input name="value" type="text" value="<?php echo $row_Advert['value']; ?>" size="11" maxlength="11" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span></span></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td align="right" valign="top" nowrap="nowrap"><strong>Comments:</strong></td>
<td bgcolor="#CCFFCC"><textarea name="Comments" cols="25" rows="3"><?php echo $row_Advert['Comments']; ?></textarea></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Picture location</strong></td>
<td bgcolor="#CCFFCC"><label for="checkopentoalloffers"></label> <input type="file" name="PictureLocation" value="<?php echo $row_Advert['PictureLocation']; ?>" size="20" /></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td height="26" align="right" nowrap="nowrap"><strong>Open to all offers:</strong></td>
<td bgcolor="#CCFFCC"><input name="checkopentoalloffers" type="checkbox" id="checkopentoalloffers" value="y" <?php if (!(strcmp($row_Advert['opentoalloffers'],"y"))) {echo "checked=\"checked\"";} ?> /></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
</table>
<p> </p>
<div id="submitdiv">
<input type="hidden" name="MM_update" value="form4" />
<input name="submit button" type="submit" id="submit button" value="Update Advert" />
</div>
<div id="exitdiv">
<label for="button15"></label>
<input name="button" type="button" id="button15" onclick="MM_goToURL('parent','Member2.php');return document.MM_returnValue" value="Exit" />
<label for="button16"></label>
</div>
<p> </p>
</form>
</fieldset>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010, isRequired:false});
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010});
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2", "integer", {minValue:1900, maxValue:2010, validateOn:["blur"], isRequired:false});
var sprytextfield3 = new Spry.Widget.ValidationTextField("sprytextfield3", "currency", {validateOn:["blur"], isRequired:false});
</script>
<br class="clearfloat" />
<!-- end #container -->
</div></div></div>
<script type="text/javascript">
<!--
var = new Spry.Widget.MenuBar("", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
</html>
<?php
mysql_free_result($Advert);
if (is_resource($Result1)) mysql_free_result($Result1);
?>Please note,
Removing I investigated spry a little more, in the end I settled for removing spry altogether,
Maybe it was because the text field in a $GET (for the default) AND a $PUT (for the update) -
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.
Maybe you are looking for
-
I have a Mac Pro 1.1 2.0gb dual processor and fitted a ATi5770 card in the spring. Today the machine has developed a serious problem. It appears that the graphics are not being initialised and the monitor remains blank. I swapped out the Ati5770 and
-
Has anyone bought and played this since it came out a couple weeks ago for mac? I am intersted in buying it if it will play well on my 24" 2.4 GHz iMac w/ Radeon 2600. I had it when i used windows on my custom pc w/ an Athlon 64 FX CPU and Radeon X19
-
Will a US factory unlocked iphone 4s work in india ?
hi , i just wanted to knw will a iphone 4s purchased frm US retail store factory unlocked iphone work without any problem in india ?hv i to purchase at higher price in india only ?
-
KSS2 Splitting equally instead of actual quantity.
HI, I am facing an issue with cost center actual splitting in KSS2. We are maintaining the planned prices in KP26 manually and not maintaining any quantity in KP26 (Planned quantity). I have maintained spltting configuration properly. 1. Create split
-
Error Mesage (Yield Qty + ScraP qty)
Greetings.. i created order with qty as 10. during confiramtion in co11, when i enterd for first opeartion yeild qty as 10 and rework qty as 1, then i am gettting error overdelivery not allowed. Means Yeild qty + rework Qty gretaer t