Problems during upgrading to iOS6-error 1602

I just tried to upgrade to iOS6 on my iPhone 4S, but just after being prompted that it will be transferred to the phone, an error 1602 interrupted it and now there's no communication between my phone and Windows 7 computer what so ever. My phone isn't responding as well with only a picture of a USB cable pointing to a iTunes icon on the phones' display?

It's just giving nothing, it's as though it's not even existing to the computer. I tried another USB port but it stays the same.Every now and then it turns off and on again, but with the same display of the cable and icon! I upgraded iTunes in the meantime and checked at my Coputers devices and there it states "recovery mode". But still iTunes doesn't pick it up?

Similar Messages

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

Problem during Upgrade 10.2.0.4

Hi Gurus !!!
During upgrade from 9.2 to 10.2 we have install 10.2.0.4 patches and now we are ready to call dbua (upgrade assistant).
When we call dbua an error occurs :
./dbua
Error message
Failed to load Main Class: oracle.sysman.assistants.dbma.Dbma
We've check enviroments variables and all are Ok.
Any ideas ?
Thanks in advance.

Hi Xavier Canals Asin,
You also need to set the JAVA_HOME environment variable.
For unix after login to the oraSID user
setenv JAVA_HOME /opt/java1.4(java location may differ check in ur system)
then check the version of the java with command java -version
if still you are getting the error
check the metalink
Exception in thread "main" java.lang.NoClassDefFoundError [ID 359067.1]
If still it is not working please reply back to me.
Thanks,
Chaitanya

Problem during burning multiplexing/burning error appers, please help!

I made a movie in imovie that is 1 hour long and contains still pictures and video. It also contains music all the way through it. I exported it to idvd then tried to burn it. It took almost 7 hours for it to get to the burn phase and then it pops up an error saying "problem during multiplexing/burning".
I have made movies in the past and this never has occured, and I have 30GB of HD space.
Any thoughts??

you can use mp3 ...it will simply take longer to encode though ......
http://docs.info.apple.com/article.html?artnum=61636
btw ... don't convert mp3 to aiff (that would be doing things backwards). For example, read these links:
http://discussions.apple.com/thread.jspa?messageID=795036&#795036
http://discussions.apple.com/thread.jspa?messageID=1049799&#1049799
Hope this helps.

Workflow problem during upgrade ?

Hi,
We are Upgrading the system from 4.6C to ECC6.0.
What kind of general problem will happen to workflow during upgrade?
So that we would take necessary precautions.
Thanks!
Richard A

Hi Richard,
The following document is a very useful source of information for upgrading to ECC 6.0:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/103b1a61-294f-2a10-6491-9827479d0bf1
Best Regards,
Trevor

Email. Problem during delivery processing Reason: Error in sieve filter: Notify mailto:recipient is not a valid address

Hi All, since 6:52 Uk time I have received email notifications for all emails that I have received.
The email notification is 'Problem during delivery processing'
The reason given 'Error in sieve filter: Notify mailto:recipient is not a valid address'
Then 'Delivery processing continued in spite of errors'
So Im getting all email, but a notifictions for all of them. Is this happenring to anyone else. Is it a known issue? Any help greatfully recived.
Many thanks.

Having the same issue. Started this morning. There is something at the end about Proofpoint virus protection. Not just one email. Several. They all have this at the end. Several emails from the county where I live. Got the messages but also this. Anyone know about this?
Apparently, I got an email from my mail order prescription service at my .mac address, but didn't get it. This is what it says at the end:
Message-id: <[email protected]>
MIME-version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
ipscore=0 suspectscore=3 phishscore=0 bulkscore=0 adultscore=0 classifier=spam
adjust=0 reason=mlx scancount=1 engine=6.0.2-1302030000
definitions=main-1303070066
X-Name-Header: [BOB] EXP Order Receipt
X-Name-Body: [BOB] EXP Order Conf Postal
X-Name-Footnote: [BOB] Web Footnotes
X-Name-Footer: [BOB] EXP Footer 2
X-Name-Cobrand: BOB
X-Name-BrandId: 00
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
Then another from my son's BS troop:
Reply-to: Troop 859 EBlast
Message-id: <[email protected]>
MIME-version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
ipscore=0 suspectscore=10 phishscore=0 bulkscore=0 adultscore=0
classifier=spam adjust=0 reason=mlx scancount=1 engine=6.0.2-1302030000
definitions=main-1303070051

Problem during upgrade of 7.4.1 and now i cant open ITUNES!!!!!

OK so theres the upgrade box popping up. I decide of course ill update now. I click download.... and while im on the internet later on . Something appears saying a problem happened with something to do with the windows... that took 2.mb and the other upgrade took like 50mb. Since it still continued installing i allowed it. Then after it. I exited itunes to see the new features. I click on it and... i get an error saying * Itunes cannot open because it is missing some files. Please reinstall. * IM a lil irritated that an update did that. But wat the **** i just reinstalled and then... while unistalling the same box appears. i X it and the unistallation finishes.
when i restart i install it again( this was my old version 7.1) and during the installation the same stupid box appeared. but the installation continued. When it was finished i took my mouse clicked on itunes and....
THE STUPID BOX IS BACK!!!!!! reinstalling did not help. This ***** i need my musiuc and thats like 800songs that will only work with itunes. PLEASE HELP

omg. I download the new version off the site and now it works. Sorry . This problem was resolved about 30 seconds after i posted it XD

Problem during upgrade

Hello,
I'm in a process of upgrading R/3 4.6c system to ecc6.
the upgrade is ran on windows server 2003 with sql server 2000.
during the upgrade in phase - parconv_upg(already passed phase
modprof_trans) the upgrade process stops with the following error -
MVNTABS ERRORS: ddlntabs and RETURN CODE in PD990814.ELP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EETP345 17:36:33: Retcode 1: SQL-error "2705-Column names in each
table must be unique. Column nam
2EETP345 e 'J_SC_SUBCONTYPE' in table 'LFB1' is specified more than
once." in DDL statement for "LF
2EETP345 B1 "
2EETP334 17:36:33: error in DDL, nametab for "LFB1" not activated
1 ETP111 exit code : "8"
i can't go into the system since it is locked (as mentioned earlier - i
already passed phase modprof_trans).the above error appeared in
parconv.elg log file.
please assist asap since this stops the upgrade process.
please let me know if you need to connect to my system - the only way
to connect to the system will be to the server itself - since as
mentioned before - the system is locked by the upgrade process.
Kind regards,
Moshe

Do you have a special addon installed (Asian Best Practice)?
Markus

TP version problem during upgrade from 4.7 sr2 to ECC6

Hello All,
i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
below is the error log excerpt from file CHECKS.LOG
   #====================================================#
Requests and information for module Initialization #
   #====================================================#
ERROR:   The upgrade needs a patched version of R3trans which is
         build on 21.06.06 or later.
         The R3trans in your active SAP kernel is either older or
         the version could not be determined. Call it without
         any option to determine the build date.
         If the build date is too old, you have to replace it
         before you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
INFO:    The version check of the disp+work in your active SAP kernel
        determined that it has a sufficient level.
         No update of disp+work is necessary.
ERROR:   The upgrade needs a patched version of tp with version
         number 340.16.05 or higher.
         The tp in your active SAP kernel is either older or the
         version could not be determined. Call it without any option
         to determine the version.
         If the version is too old, you have to replace it before
         you can continue the upgrade.
         Download the latest executable available from the SAP service
         market place and update it before you continue.
         Otherwise, the upgrade tools will be corrupted.
ERROR: To be able to use ASU Toolbox, your system requires
       the ST-PI software component with at least Support Package Level 8
      After the update is done, the module must be repeated!
       For more information, see the upgrade documentation
INFO:       The upgrade strategy for the addon ABA_PLUS
            is described in note: 632429
INFO:       The upgrade strategy for the addon APPINT
            is described in note: 632429
INFO:       The upgrade strategy for the addon BP-R3PF
            is described in note: 632429
INFO:       The upgrade strategy for the addon FINBASIS
            is described in note: 438521
INFO:       The upgrade strategy for the addon LSO
            is described in note: 503468
INFO:       The upgrade strategy for the addon LSOFE
            is described in note: 503907
INFO:       The upgrade strategy for the addon PI
            is described in note: 700779
INFO:       The upgrade strategy for the addon PI_BASIS
            is described in note: 555060
INFO:       The upgrade strategy for the addon SLL_PI
            is described in note: 1306751
INFO:       The upgrade strategy for the addon ST-A/PI
            is described in note: 69455
INFO:       The upgrade strategy for the addon ST-PI
            is described in note: 539977
INFO:       The upgrade strategy for the addon WP-PI
            is described in note: 632429
   #===========================================================#
PREPARE module Initialization finished with status failed #
   #===========================================================#
i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
nice.
Mani

Hi Mani,
ERROR: The upgrade needs a patched version of R3trans which is
build on 21.06.06 or later.
ERROR: The upgrade needs a patched version of tp with version
number 340.16.05 or higher.
show that the tp and R3trans used by the source 470 system are old.
You should download the latest tp and R3trans for kernel 470, and
replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
With Best Regards
Julia

Problem during Upgradation from 9.2.0.6 to 9.2.0.8 in production.URGENT!

Hi ,
Let me give you some background..
we were sailing well with our 9.2.0.6 version in Sun 64 SPARC for our Data Warehouse till we hit what is called one million bug!! Segement and extent does not match!! In order to get rid of it we decided to upgrade our Production database from 9.2.0.6 to 9.2.0.8.We tested first in Stage and it was running fine all our ETL job was running without any issues.Then we tried changing some parameter as given below
Parallel_automatic_tuning set to false
parallel_max_server set to 64 from 160.
After making this change we hit a bug in stage which we resolved by applying the patch 5523799.This bug says that oracle gets hit with
ORA-600 [KCBGTCR_3] AND ORA-600 [KCBGTCR_12] WHEN DOING OWB MAPPING
But in production even with this patch applied we are unable to make select count(*). One mistake what what we did,which makes the stage and production processes different is that while making parameter changes in production we changed
parallel_max_server set to 64 from 160 keeping
Parallel_automatic_tuning set to true!!
Then we truncated a Master table with 8 million rows through a job before we realized the mistake.But now nothing is working!! Do you have any idea how to fix the issue.
If you need anymore information please let me know.
I appreciate your helping hands.
AD

First off, note that a number of folks around here intentionally avoid posts marked "urgent"-- that's generally considered impolite. Others avoid threads that are cross-posted in multiple forums. Either of those could slow down responses...
What does "unable to make select count(*)" mean? Are you getting an error in prod? Is it the same error you're getting in staging?
Normally, urgent production issues, particularly those that seem to be related to a particular Oracle bug, need to be dealt with by Oracle support. Unless someone here happens to have dealt with this very particular scenario, the best we could do would be to try to read the same Metalink notes you're probably already reading to try to come up with suggestions. In the end, though, it's likely that Oracle Support will need to be involved to figure out what the safe options are.
Also, please understand that we're all volunteers here, so certain types of issues are just outside the scope of what anyone here is likely to be able to help with. I'm more than happy to spend hours reading Metalink notes, building test systems, and testing approaches to resolve issues for a client when I understand the systems in place (and where my hours are billable). I, and most of the other folks around here, can't generally commit that sort of time for free to resolve very specific errors on production systems we don't understand. Even if we had the time, OTN isn't an ideal forum for the sort of back-and-forth that would be necessary before anyone could responsibly suggest changes to make to a production system.
Of course, someone may come along that has hit exactly the bug you've hit and happens to know of a quick and easy solution. If there is no Metalink note that is directly on point, though, I'd tend to doubt that the perfect person will come along, certainly not in the very near term.
Justin

It seems that my ipad will no longer connect to aol or yahoo mail. this has happened within the past month. my mother's ipad and my cousin in a different state is having the same problem. i upgraded to ios6 and my mother has not so that is not the issue.

my ipad will not connect to yahoo or aol mail, anymore. my mother is having the same problem and also a cousin, in a different state. my cousin and i upgraded to ios 6 and my mother did not. i do not understand why this is happening.

I should add that i have also done:
- reset (holding two buttons)
- updated software to latest IOS
- done a full restore to original settings
None of this has solved the problem.

Apex 4 problem after upgrading - apex$_rpt_src error

Hi all -
I just upgraded my Apex installation Sunday, and yesterday I also installed the sample websheet application and told it to create the objects in the default schema my other stuff resides in.
Today, one of my users said there's a problem with one of the pages, saying "missing right parenthesis", so going through the debug I see what the problem is. At the end of one of the queries, it looks like Apex added the following:
apex$_rpt_src )
I'm wondering if this is related to my adding the sample websheet application in the same schema as my "real" data and application? It seems strange though that it (so far) only seems to be happening with this one query. out of around a hundred or so different ones. The offending "addition" of code isn't visible in the actual query specification itself, so I don't know how to get rid of it. Anybody else run across this and have an idea on how to get rid of it? Will deleting the sample app fix the problem?
Thanks,
Bill Ferguson

Hi Christina,
All of my report regions are "manuallly created" reports. The wizards didn't provide enough functionality, and I'm still trying to figure out how or if I can incorporate IR reports.
The websheet application works fine, I just included it in the same schema as my regular apps for convenience. At first, due the naming of what appeared to be the problem code (apex$_rpt_src), I was wondering if it was related to the websheet app, but it wasn't.
The problem line in my manual reports was originally the included an order by clause, which I later commented out. Having the last line commented out seemed to have caused my problem. I think that probably this all gets wrapped up by Apex where it inserts the intial left paren "(", then what I specify for my query, then appends the trailing "apex$_rpt_src)", and since my last line was commented out, the ending "apex_rpt_src)" wound up getting commented out as well.
Perhaps a "fix" to programmer mistakes like mine would be to modify the code that appends "apex_rpt_src)" to be "chr(13) apex_rpt_src)", so there is a new line before the added code? This would circumvent people like myself inadvertently commenting the last line of their queries and causing unintended problems that are difficult to find.
Hope this helps.
Bill Ferguson

TS3899 Email problem since upgrading to IOS6

Since upgrading my iPad to IOS6, I can no longer download Email from my ISP. I checked settings and they appear to be the same on another device running IOS5 (and works fine.) I any ideas on setting quirks that I may be missing?

Have just read some other threads, and it suggested deleting then reinstalling my gmail account, which worked.
Thanks!

Problem during upgrade from 10g R1 to R2 - background color

We are using Oracle 10g Forms , where we will have date and time display in every page of the form. Now we have upgraded the version from 10g R1 to R2.
In R1 , when the date&time flickers the background color will be in white color.
But in R2, when the date&time flickers the background color is in Grey color.
How to change the background color back to white. the date & time display calls the jar file to display the time. No change in the jar file.. I have changed the background color in the property palette of the date&time as white.. but still the problem exist..
Any suggestions or solutions , plsssss.......

In R2:
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = self;</SCRIPT>
# HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=frmall.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
In R1 :
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar
# heartBeat 8/16/2006 czlapinski
# heartBeat changed to 30 8/29/2006 czlapinski
heartBeat=30
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0026-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,26
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.26
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
Using the same Jinitator version , but the version for jpi differs.

Problems during upgrading to iOS6-error 1602

Similar Messages

Maybe you are looking for